Annovi Reverberi - AR North America

Annovi Reverberi / AR North America RG 15.28HN pump with 24mm solid shaft. RG series pumps are designed for use on heavy duty cleaning units and industrial systems. Can be coupled to various types of motors, directly or with flexible joint

 

Features:
• Nickel Plated forged brass pump head, designed for strength
• Intake and delivery valves with larger water passages
• Extra-thick ceramic pistons for greater durability
• Double gasket sealing system
• Double lip oil seals
• Pump body and cover in die-cast aluminum alloy
• Side cover with incorporate oil sight glass
• Rear cover with oil drain outlet
• Top quality, oversize tapered roller bearings
• Oversize shaft with long end section for better torque transmission
• Oversized connecting-rods in a special low-friction alloy
• Oversize, ground pistons for smoother stroke and better oil-tightness

Specifications:
• Max. Volume: 3.96 GPM
• Max. Discharge Pressure: 4,000 PSI
• Max. Pump Speed: 1,450 RPM
• Shaft Diameter: 24mm Solid
• Max. Horsepower Requirements: 14.4 GHP
• Max. Fluid Temp.: 140° F.
• Inlet Ports (2): 1/2" Female
• Outlet Ports (2): 3/8" Female
• Oil capacity: 32.0 oz
• Note: Item for sale is PUMP ONLY as shown in picture and does not include unloader which is required for proper operation
• Weight: 27.5 lb.

• Triplex Plunger Pump
• Direct Drive with Gas Flange 7-18 HP SAE
• Max. Volume: 5.0 GPM
• Max. Discharge Pressure: 4,000 PSI
• Max. Pump Speed: 3400 RPM
• Shaft Diameter: 1” Hollow
• Maximum Horsepower Requirements: 15.52 GHP
• Max. Fluid Temp.: 140 degrees F.
• Inlet Ports (2): 1/2" Female
• Discharge Ports (2): 3/8" Female
• Drive Side: Standard right
• Nickel Plated forged brass head & valve covers
• Solid ceramic plungers
• Weight: 21.0 lb

• Triplex Plunger Pump
• Direct Drive with Gas Flange 7-18 HP SAE
• Max. Volume: 4.5 GPM
• Max. Discharge Pressure: 4,000 PSI
• Max. Pump Speed: 3400 RPM
• Shaft Diameter: 1” Hollow
• Maximum Horsepower Requirements: 18.96 GHP
• Max. Fluid Temp.: 140 degrees F.
• Inlet Ports (2): 1/2" Female
• Discharge Ports (2): 3/8" Female
• Drive Side: Standard right
• Nickel Plated forged brass head & valve covers
• Solid ceramic plungers
• Weight: 21.0 lb

• Triplex Plunger Pump
• Direct Drive with Gas Flange 7-18 HP SAE
• Max. Volume: 5.5 GPM
• Max. Discharge Pressure: 4,000 PSI
• Max. Pump Speed: 3400 RPM
• Shaft Diameter: 1” Hollow
• Maximum Horsepower Requirements: 18.96 GHP
• Max. Fluid Temp.: 140 degrees F.
• Inlet Ports (2): 1/2" Female
• Discharge Ports (2): 3/8" Female
• Drive Side: Standard right
• Nickel Plated forged brass head & valve covers
• Solid ceramic plungers
• Weight: 21.0 lb

• Triplex Plunger Pump
• Direct Drive with Gas Flange 7-18 HP SAE
• Max. Volume: 4.0 GPM
• Max. Discharge Pressure: 4,000 PSI
• Max. Pump Speed: 3400 RPM
• Shaft Diameter: 1” Hollow
• Maximum Horsepower Requirements: 14.6 GHP
• Max. Fluid Temp.: 160 degrees F.
• Inlet Ports (2): 1/2" BSP
• Discharge Ports (2): 3/8" BSP
• Drive Side: Standard right
• Nickel Plated forged brass head & valve covers
• Solid ceramic plungers
• Replaces RKV4G35HD-F24
• Weight: 25.0-27.0 lb

• Triplex Plunger Pump
• Direct Drive with Electric Flange NEMA 182-184TC
• Max. Volume: 4.0 GPM
• Max. Discharge Pressure: 3,000 PSI
• Max. Pump Speed: 1750 RPM
• Shaft Diameter: 1 1/8” Hollow
• Minimum Horsepower Requirements: 8.3 BHP
• Max. Fluid Temp.: 160 degrees F.
• Inlet Ports (2): 1/2" BSP
• Discharge Ports (2): 3/8" BSP
• Drive Side: Standard right
• Nickel Plated forged brass head & valve covers
• Solid ceramic plungers
• Weight: 22.0 lb

Annovi Reverberi / AR North America RK NL Version Pump with 24mm solid long shaft and 1,450 RPM. Used in a wide variety of high pressure washing applications. These pumps are designed for gearbox , belt drive, or coupling drive systems driven by electric motor or gasoline driven systems, gasoline engine driven systems

Features
• They are constructed of die-cast bodies and feature a nickel plated forged brass head
• Internal components include special thick solid ceramic plungers for long life and durability
• Precision cast cooling fins are anodized for maximum heat dissipation
• Oversized tapered roller bearings and the precision supports assure proper shaft alignment and maximum life
• Valve cages of special designed Ultra-Form provide positive seating and extended life
• One-piece connecting rods are oversized for strength and load disbursement

Specifications
• Max. Volume: 4.75 GPM
• Max. Discharge Pressure: 4,000 PSI
• Max. Pump Speed: 1,450 RPM
• Shaft Diameter: 24mm Solid (long shaft)
• Shaft Length: 45mm (1.77")
• Maximum Horsepower Requirements: 13.0 EBHP
• Max. Fluid Temp.: 140º F.
• Inlet Ports (2): 1/2" FPT
• Discharge Ports (2): 3/8" FPT
• Drive Side: Standard right
• Weight: 20.0 lb.

• Triplex Plunger Pump
• Direct Drive with Electric Flange NEMA 182-184TC
• Max. Volume: 3.5 GPM
• Max. Discharge Pressure: 4,000 PSI
• Max. Pump Speed: 1750 RPM
• Shaft Diameter: 1 1/8” Hollow
• Minimum Horsepower Requirements: 9.6 BHP
• Max. Fluid Temp.: 160 degrees F.
• Inlet Ports (2): 1/2" BSP
• Discharge Ports (2): 3/8" BSP
• Drive Side: Standard right
• Nickel Plated forged brass head & valve covers
• Solid ceramic plungers
• Weight: 22.0 lb

• Triplex Plunger Pump
• Direct Drive with Electric Flange NEMA 182-184TC
• Max. Volume: 4.8 GPM
• Max. Discharge Pressure: 3,000 PSI
• Max. Pump Speed: 1750 RPM
• Shaft Diameter: 1 1/8” Hollow
• Minimum Horsepower Requirements: 10.0 BHP
• Max. Fluid Temp.: 140 degrees F.
• Inlet Ports (2): 1/2" BSP
• Discharge Ports (2): 3/8" BSP
• Drive Side: Standard right
• Forged brass nickel plated head & valve coversi
• Solid ceramic plungers
• Replaces RKA4.8G30E-F17
• Weight: 22.0 lb

Annovi Reverberi / AR North America RK NL Version Pump with 24mm solid shaft and 1,450 RPM. Used in a wide variety of high pressure washing applications. These pumps are designed for gearbox , belt drive, or coupling drive systems driven by electric motor or gasoline driven systems, gasoline engine driven systems

Features
• They are constructed of die-cast bodies and feature a forged brass head
• Internal components include special thick solid ceramic plungers for long life and durability
• Precision cast cooling fins are anodized for maximum heat dissipation
• Oversized tapered roller bearings and the precision supports assure proper shaft alignment and maximum life
• Valve cages of special designed Ultra-Form provide positive seating and extended life
• One-piece connecting rods are oversized for strength and load disbursement

Specifications
• Max. Volume: 5.55 GPM
• Max. Discharge Pressure: 3,000 PSI
• Max. Pump Speed: 1,450 RPM
• Shaft Diameter: 24mm Solid
• Maximum Horsepower Requirements: 11.0 EBHP
• Max. Fluid Temp.: 140º F.
• Inlet Ports (2): 1/2" FPT
• Discharge Ports (2): 3/8" FPT
• Drive Side: Standard right
• Weight: 20.0 lb.

Annovi Reverberi / AR North America RKA N Version Pump with 24mm solid shaft and 1,750 RPM. Used in a wide variety of high pressure washing applications. These pumps are designed for gearbox , belt drive, or coupling drive systems driven by electric motor or gasoline driven systems, gasoline engine driven systems

Features
• They are constructed of die-cast bodies and feature a nickel plated forged brass head
• Internal components include special thick solid ceramic plungers for long life and durability
• Precision cast cooling fins are anodized for maximum heat dissipation
• Oversized tapered roller bearings and the precision supports assure proper shaft alignment and maximum life
• Valve cages of special designed Ultra-Form provide positive seating and extended life
• One-piece connecting rods are oversized for strength and load disbursement

Specifications
• Max. Volume: 7.1 GPM
• Max. Discharge Pressure: 2,000 PSI
• Max. Pump Speed: 1,750 RPM
• Shaft Diameter: 24mm Solid
• Maximum Horsepower Requirements: 10.0 EBHP
• Max. Fluid Temp.: 140º F.
• Inlet Ports (2): 1/2" FPT
• Discharge Ports (2): 3/8" FPT
• Drive Side: Standard right
• Weight: 20.0 lb.

Annovi Reverberi / AR North America RKA N Version Pump with 24mm solid shaft and 1,750 RPM. Used in a wide variety of high pressure washing applications. These pumps are designed for gearbox , belt drive, or coupling drive systems driven by electric motor or gasoline driven systems, gasoline engine driven systems

Features
• They are constructed of die-cast bodies and feature a nickel plated forged brass head
• Internal components include special thick solid ceramic plungers for long life and durability
• Precision cast cooling fins are anodized for maximum heat dissipation
• Oversized tapered roller bearings and the precision supports assure proper shaft alignment and maximum life
• Valve cages of special designed Ultra-Form provide positive seating and extended life
• One-piece connecting rods are oversized for strength and load disbursement

Specifications
• Max. Volume: 6.6 GPM
• Max. Discharge Pressure: 2,000 PSI
• Max. Pump Speed: 1,750 RPM
• Shaft Diameter: 24mm Solid
• Maximum Horsepower Requirements: 9.0 EBHP
• Max. Fluid Temp.: 140º F.
• Inlet Ports (2): 1/2" FPT
• Discharge Ports (2): 3/8" FPT
• Drive Side: Standard right
• Weight: 20.0 lb.

Annovi Reverberi / AR North America RK N Version Pump with 24mm solid shaft and 1,450 RPM. Used in a wide variety of high pressure washing applications. These pumps are designed for gearbox , belt drive, or coupling drive systems driven by electric motor or gasoline driven systems, gasoline engine driven systems

Features
• They are constructed of die-cast bodies and feature a nickel plated forged brass head
• Internal components include special thick solid ceramic plungers for long life and durability
• Precision cast cooling fins are anodized for maximum heat dissipation
• Oversized tapered roller bearings and the precision supports assure proper shaft alignment and maximum life
• Valve cages of special designed Ultra-Form provide positive seating and extended life
• One-piece connecting rods are oversized for strength and load disbursement

Specifications
• Max. Volume: 6.34 GPM
• Max. Discharge Pressure: 2,200 PSI
• Max. Pump Speed: 1,450 RPM
• Shaft Diameter: 24mm Solid
• Maximum Horsepower Requirements: 11.0 EBHP
• Max. Fluid Temp.: 140º F.
• Inlet Ports (2): 1/2" FPT
• Discharge Ports (2): 3/8" FPT
• Drive Side: Standard right
• Weight: 20.0 lb.

Annovi Reverberi / AR North America RKA N Version Pump with 24mm solid shaft and 1,750 RPM. Used in a wide variety of high pressure washing applications. These pumps are designed for gearbox , belt drive, or coupling drive systems driven by electric motor or gasoline driven systems, gasoline engine driven systems

Features
• They are constructed of die-cast bodies and feature a nickel plated forged brass head
• Internal components include special thick solid ceramic plungers for long life and durability
• Precision cast cooling fins are anodized for maximum heat dissipation
• Oversized tapered roller bearings and the precision supports assure proper shaft alignment and maximum life
• Valve cages of special designed Ultra-Form provide positive seating and extended life
• One-piece connecting rods are oversized for strength and load disbursement

Specifications
• Max. Volume: 5.5 GPM
• Max. Discharge Pressure: 3,000 PSI
• Max. Pump Speed: 1,750 RPM
• Shaft Diameter: 24mm Solid
• Maximum Horsepower Requirements: 11.0 EBHP
• Max. Fluid Temp.: 140º F.
• Inlet Ports (2): 1/2" FPT
• Discharge Ports (2): 3/8" FPT
• Drive Side: Standard right
• Weight: 20.0 lb.

Annovi Reverberi / AR North America RK N Version Pump with 24mm solid shaft and 1,450 RPM. Used in a wide variety of high pressure washing applications. These pumps are designed for gearbox , belt drive, or coupling drive systems driven by electric motor or gasoline driven systems, gasoline engine driven systems

Features
• They are constructed of die-cast bodies and feature a nickel plated forged brass head
• Internal components include special thick solid ceramic plungers for long life and durability
• Precision cast cooling fins are anodized for maximum heat dissipation
• Oversized tapered roller bearings and the precision supports assure proper shaft alignment and maximum life
• Valve cages of special designed Ultra-Form provide positive seating and extended life
• One-piece connecting rods are oversized for strength and load disbursement

Specifications
• Max. Volume: 4.75 GPM
• Max. Discharge Pressure: 4,000 PSI
• Max. Pump Speed: 1,450 RPM
• Shaft Diameter: 24mm Solid
• Maximum Horsepower Requirements: 13.0 EBHP
• Max. Fluid Temp.: 140º F.
• Inlet Ports (2): 1/2" FPT
• Discharge Ports (2): 3/8" FPT
• Drive Side: Standard right
• Weight: 20.0 lb.

Annovi Reverberi / AR North America RK NL Version Pump with 24mm solid long shaft and 1,450 RPM. Used in a wide variety of high pressure washing applications. These pumps are designed for gearbox , belt drive, or coupling drive systems driven by electric motor or gasoline driven systems, gasoline engine driven systems

Features
• They are constructed of die-cast bodies and feature a forged brass head
• Internal components include special thick solid ceramic plungers for long life and durability
• Precision cast cooling fins are anodized for maximum heat dissipation
• Oversized tapered roller bearings and the precision supports assure proper shaft alignment and maximum life
• Valve cages of special designed Ultra-Form provide positive seating and extended life
• One-piece connecting rods are oversized for strength and load disbursement

Specifications
• Max. Volume: 5.55 GPM
• Max. Discharge Pressure: 3,000 PSI
• Max. Pump Speed: 1,450 RPM
• Shaft Diameter: 24mm Solid (long shaft)
• Shaft Length: 45mm (1.77")
• Maximum Horsepower Requirements: 11.0 EBHP
• Max. Fluid Temp.: 140º F.
• Inlet Ports (2): 1/2" FPT
• Discharge Ports (2): 3/8" FPT
• Drive Side: Standard right
• Weight: 20.0 lb.

• Triplex Plunger Pump
• Direct Drive with Electric Flange NEMA 182-184TC
• Max. Volume: 5.5 GPM
• Max. Discharge Pressure: 1,300 PSI
• Max. Pump Speed: 1750 RPM
• Shaft Diameter: 1 1/8” Hollow
• Minimum Horsepower Requirements: 5.0 BHP
• Max. Fluid Temp.: 160 degrees F.
• Inlet Ports (2): 1/2" BSP
• Discharge Ports (2): 3/8" BSP
• Drive Side: Standard right
• Forged brass head & valve covers
• Solid ceramic plungers
• Weight: 22.0 lb

br>• Triplex Plunger Pump
• Direct Drive with Electric Flange NEMA 182-184TC
• Max. Volume: 4.8 GPM
• Max. Discharge Pressure: 3,000 PSI
• Max. Pump Speed: 1750 RPM
• Shaft Diameter: 1 1/8” Hollow
• Minimum Horsepower Requirements: 10.0 BHP
• Max. Fluid Temp.: 140 degrees F.
• Inlet Ports (2): 1/2" BSP
• Discharge Ports (2): 3/8" BSP
• Drive Side: Standard right
• Forged brass head & valve covers
• Solid ceramic plungers
• Weight: 22.0 lb

Annovi Reverberi / AR North America RKA4G40HNL pump with Long Shaft. RKA series plunger pumps are designed for a wide variety of high pressure washing applications. Annovi Reverberi RKA N Version with 24mm solid shaft series pumps are designed to belt drive or gear drive on gas engines and belt drive or flange coupling on electric motors

Features:
• Special thick solid ceramic plungers for long life and durability
• Oversized tapered roller bearings and the precision supports assure proper shaft alignment and maximum life.
• Precision cast cooling fins are anodized for maximum heat dissipation
• Nickel plated, forged brass head
• One-Piece connecting rods are oversized for strength and load disbursement
• Valve cages of special designed Ultra-Form provide positive seating and extended life

Specifications:
• Max. Volume: 4.0 GPM
• Max. Discharge Pressure: 4,000 PSI
• Max. Pump Speed: 1,750 RPM
• Shaft Diameter: 24mm Solid (long shaft)
• Shaft Length: 2"
• Max. Horsepower Requirements: 14.54 GHP (Industrial Grade)
• Max. Fluid Temp.: 140° F.
• Inlet Ports (2): 1/2" Female
• Outlet Ports (2): 3/8" Female
• Oil capacity: 15.0 oz
• Weight: 20.0 lb.

Annovi Reverberi / AR North America RK N SX Version Pump with 24mm solid Left Handed shaft and 1,450 RPM. Used in a wide variety of high pressure washing applications. These pumps are designed for gearbox , belt drive, or coupling drive systems driven by electric motor or gasoline driven systems, gasoline engine driven systems

Features
• They are constructed of die-cast bodies and feature a nickel plated forged brass head
• Internal components include special thick solid ceramic plungers for long life and durability
• Precision cast cooling fins are anodized for maximum heat dissipation
• Oversized tapered roller bearings and the precision supports assure proper shaft alignment and maximum life
• Valve cages of special designed Ultra-Form provide positive seating and extended life
• One-piece connecting rods are oversized for strength and load disbursement

Specifications
• Max. Volume: 3.96 GPM
• Max. Discharge Pressure: 4,000 PSI
• Max. Pump Speed: 1,450 RPM
• Shaft Diameter: 24mm Solid
• Maximum Horsepower Requirements: 11.0 EBHP
• Max. Fluid Temp.: 140º F.
• Inlet Ports (2): 1/2" FPT
• Discharge Ports (2): 3/8" FPT
• Drive Side: Left
• Weight: 20.0 lb.