Annovi Reverberi - AR North America

The Annovi Reverberi XMA3G18E-F33, E version 5/8" hollow shaft triplex pump is ready for direct or pulley driving. This pump is manufactured with a brass pump head suitable for a wide range of conditions. The XMA3G18E-F33 can produce up to 1800 Max PSI, 3 Max GPM, and is designed to operate at 1750 RPM. Constructed with frictionless aluminum connecting rods and ceramic pistons, the XMA3G18E-F33 weighs in at 15 lbs and boasts a sleek compact design

• Direct Drive with Electric Flange NEMA 56C
• Max. Volume: 3.0 GPM
• Max. Discharge Pressure: 1,800 PSI
• Max. Pump Speed: 1750 RPM
• Shaft Diameter: 5/8” Hollow
• Minimum Horsepower Requirements: 4.0 EBHP
• Max. Fluid Temp.: 140 degrees F.
• Inlet Ports (2): 1/2" BSP
• Discharge Ports (2): 3/8" BSP
• Drive Side: Standard right
• Forged brass head & valve covers
• Solid ceramic plungers
• Weight: 15.0 lb

Annovi Reverberi / AR North America XMV3G30D-F24C2I pump with bolt-on unloader and chemical injector. XMV D Version with F24 flange series pumps are designed to direct drive on gasoline engines ranging from 8 -13 HP.

Specifications:
• Max. Volume: 3.0 GPM
• Max. Discharge Pressure: 3,000 PSI
• Max. Pump Speed: 3,400 RPM
• Shaft Diameter: 1” Hollow
• Max. Horsepower Requirements: 8.2 GHP
• Max. Fluid Temp.: 140° F.
• Drive Side: Standard right
• Forged brass head & valve covers
• Solid ceramic plungers
• Unloader Inlet: 1/2" MPT
• Unloader Outlet: 3/8" MPT
• Weight: 22.0 lb.

Package Components:
• XMV3G30D-F24 pump
• AR Gymatic 3/B Adjustable unloader with adjustable chemical injector

Kit: Valve 18mm RK-SS

This Annovi Reverberi / AR North America RMW25G25D, RMW 2.5G25D series plunger pump will pump up to 2.5 GPM at 2,500 PSI. Vertical Radial-Axial series replacement pump (Mounts under the engine). The hollow shafted pump includes a built-in pressure control valve and chemical injection system

Features:
• Check the HOLE in the ARM location relative to the inlet/outlet Port (2nd Picture)
• Fits most homeowner type vertical pressure washers with Front Mounted Pump (see 3rd image)
• NOTE: This Pump DOES NOT fit Karcher units using a hex head bolt to drive the pump.

Specifications:
• Vertical Mount with Gas Flange 3-7 HP
• Note: This pump is Front Mounted
• Max. Volume: 2.5 GPM
• Max. Discharge Pressure: 2,500 PSI
• Max. Pump Speed: 3,400 RPM
• Shaft Diameter: 7/8” Hollow
• Built In unloader and chemical injector
• Maximum Horsepower Requirements: 5.8 GHP
• Inlet Port: 3/4" FGH (garden hose)
• Outlet Port: 22mm (Twist Connect)
• Auxiliary Port: 1/4” FPT
• Brass manifold
• Stainless steel plungers
• Pump comes with oil
• See optional items below or in our store
• Note: Engine shafts longer that 2” will require spacers or washers
• Weight: 7.7lb.

Bolt-On Unloader Fits AR SXMA, SXMV, XM, XMA, XMV, XR, RK, RKA, RKV, RR, RRA, RRV Pumps

Specifications:
• Maximum Pressure: 3,650 PSI
• Max. Volume: 5.5 GPM
• Adjustable pressure
• Adjustable chemical injector
• Brass body
• Built-In bypass channel
• Max. Fluid Temp.: 165 degrees F.
• Inlet Ports (1): 1/2" FPT
• Discharge Ports (1): 3/8” MPT
• Injector Size: 2.0 (4.0 - 5.5 GPM)
• 2.5 lbs. Weight

Annovi Reverberi / AR North America RKA4G40HNL pump with Long Shaft. RKA series plunger pumps are designed for a wide variety of high pressure washing applications. Annovi Reverberi RKA N Version with 24mm solid shaft series pumps are designed to belt drive or gear drive on gas engines and belt drive or flange coupling on electric motors

Features:
• Special thick solid ceramic plungers for long life and durability
• Oversized tapered roller bearings and the precision supports assure proper shaft alignment and maximum life.
• Precision cast cooling fins are anodized for maximum heat dissipation
• Nickel plated, forged brass head
• One-Piece connecting rods are oversized for strength and load disbursement
• Valve cages of special designed Ultra-Form provide positive seating and extended life

Specifications:
• Max. Volume: 4.0 GPM
• Max. Discharge Pressure: 4,000 PSI
• Max. Pump Speed: 1,750 RPM
• Shaft Diameter: 24mm Solid (long shaft)
• Shaft Length: 2"
• Max. Horsepower Requirements: 14.54 GHP (Industrial Grade)
• Max. Fluid Temp.: 140° F.
• Inlet Ports (2): 1/2" Female
• Outlet Ports (2): 3/8" Female
• Oil capacity: 15.0 oz
• Weight: 20.0 lb.

Annovi Reverberi / AR North America RKA N Version Pump with 24mm solid shaft and 1,750 RPM. Used in a wide variety of high pressure washing applications. These pumps are designed for gearbox , belt drive, or coupling drive systems driven by electric motor or gasoline driven systems, gasoline engine driven systems

Features
• They are constructed of die-cast bodies and feature a nickel plated forged brass head
• Internal components include special thick solid ceramic plungers for long life and durability
• Precision cast cooling fins are anodized for maximum heat dissipation
• Oversized tapered roller bearings and the precision supports assure proper shaft alignment and maximum life
• Valve cages of special designed Ultra-Form provide positive seating and extended life
• One-piece connecting rods are oversized for strength and load disbursement

Specifications
• Max. Volume: 4.0 GPM
• Max. Discharge Pressure: 4,000 PSI
• Max. Pump Speed: 1,750 RPM
• Shaft Diameter: 24mm Solid
• Maximum Horsepower Requirements: 14.54 GHP (Industrial Grade)
• Max. Fluid Temp.: 140º F.
• Inlet Ports (2): 1/2" FPT
• Discharge Ports (2): 3/8" FPT
• Drive Side: Standard right
• Replaces RKA4G30N
• Weight: 20.0 lb.

Annovi Reverberi / AR North America RKA N Version Pump with 24mm solid shaft and 1,750 RPM. Used in a wide variety of high pressure washing applications. These pumps are designed for gearbox , belt drive, or coupling drive systems driven by electric motor or gasoline driven systems, gasoline engine driven systems

Features
• They are constructed of die-cast bodies and feature a nickel plated forged brass head
• Internal components include special thick solid ceramic plungers for long life and durability
• Precision cast cooling fins are anodized for maximum heat dissipation
• Oversized tapered roller bearings and the precision supports assure proper shaft alignment and maximum life
• Valve cages of special designed Ultra-Form provide positive seating and extended life
• One-piece connecting rods are oversized for strength and load disbursement

Specifications
• Max. Volume: 5.5 GPM
• Max. Discharge Pressure: 3,000 PSI
• Max. Pump Speed: 1,750 RPM
• Shaft Diameter: 24mm Solid
• Maximum Horsepower Requirements: 11.0 EBHP
• Max. Fluid Temp.: 140º F.
• Inlet Ports (2): 1/2" FPT
• Discharge Ports (2): 3/8" FPT
• Drive Side: Standard right
• Weight: 20.0 lb.

br>• Triplex Plunger Pump
• Direct Drive with Electric Flange NEMA 182-184TC
• Max. Volume: 4.8 GPM
• Max. Discharge Pressure: 3,000 PSI
• Max. Pump Speed: 1750 RPM
• Shaft Diameter: 1 1/8” Hollow
• Minimum Horsepower Requirements: 10.0 BHP
• Max. Fluid Temp.: 140 degrees F.
• Inlet Ports (2): 1/2" BSP
• Discharge Ports (2): 3/8" BSP
• Drive Side: Standard right
• Forged brass head & valve covers
• Solid ceramic plungers
• Weight: 22.0 lb