Annovi Reverberi - AR North America

Annovi Reverberi AR XWF36.17N solid shaft triplex plunger pump is rated up to 9.51 GPM at max 2,500 PSI

Features:
• Solid Shaft for Belt or Gear Drive
• Bearings are premium SKF tapered roller bearings that provide extra load support, smoother and lower crankcase running temperatures and overall extended pump life
• Forged brass head & valve covers
• Plungers are extra thick solid ceramic titanium impregnated for extended seal and pump life

Specifications:
• Max. Volume: 9.51 GPM
• Max. Discharge Pressure: 2,500 PSI
• Max. Pump Speed: 1000 RPM
• Shaft Diameter: 24mm Solid
• Max. Horsepower Requirements: 16.3 EBHP
• Max. Fluid Temp.: 160 degrees F.
• Inlet Ports (2): 3/4" BSP
• Discharge Ports (2): 3/8" BSP
• Drive Side: Standard right
• Weight: 34.0 lb.

Annovi Reverberi AR XWF36.17N-SX solid shaft triplex plunger pump (Left Hand) is rated up to 9.51 GPM at max 2,500 PSI

Features:
• Solid Shaft for Belt or Gear Drive
• Bearings are premium SKF tapered roller bearings that provide extra load support, smoother and lower crankcase running temperatures and overall extended pump life
• Forged brass head & valve covers
• Plungers are extra thick solid ceramic titanium impregnated for extended seal and pump life

Specifications:
• Max. Volume: 9.51 GPM
• Max. Discharge Pressure: 2,500 PSI
• Max. Pump Speed: 1000 RPM
• Shaft Diameter: 24mm Solid
• Max. Horsepower Requirements: 16.3 EBHP
• Max. Fluid Temp.: 160 degrees F.
• Inlet Ports (2): 3/4" BSP
• Discharge Ports (2): 3/8" BSP
• Drive Side: Left
• Weight: 34.0 lb.

This Annovi Reverberi / AR North America SRMW2.2G26-EZ-SX, SRMW22G26-EZ-SX aluminum vertical plunger pump will pump up to 2.2 GPM at 2,600 PSI. It spins at 3400 RPM in a direct drive system coupled with a gasoline engine. The matching flange provides convenient connection to most 7/8” shaft 4 - 7 HP engines. The hollow shafted pump includes a built-in pressure control valve, and chemical injection system. Comes with Thermal Relief Valve and Easy Start Valve (EZ).

Features:
• The "S" version has upgraded grade valves
• 3-Piston alternating volumetric pumps for use on cleaning units
• Check the HOLE in the ARM location relative to the inlet/outlet Port (2nd Picture)
• This SX pump is Back Mounted - 180º rotated shaft configuration (3rd picture)
• Pump body in die-cast aluminum alloy
• Pistons driven by swash plate mechanism
• Two bearing systems, to support the pump shaft and pistons
• Pistons in hardened and tempered steel
• Pump head in aluminum
• Double gasket sealing system
• Intake valves fitted above the pistons for greater efficiency
• Integral regulating valve
• Integral detergent suction system

Specifications:
• Max. Volume: 2.2 GPM
• Max. Discharge Pressure: 2,600 PSI
• Max. Pump Speed: 3,400 RPM
• Shaft Diameter: 7/8” Hollow
• Maximum Horsepower Requirements (Industrial): 5.2 GHP
• Maximum Horsepower Requirements (Standard): 6.4 GHP
• Inlet Port: 3/4" GHA (garden hose)
• Outlet Port: 22mm-14 (Twist Connect)
• Weight: 7.3 lb.

 

This Annovi Reverberi / AR North America SRMW2.2G26-EZ, SRMW22G26-EZ aluminum vertical plunger pump will pump up to 2.2 GPM at 2,600 PSI. It spins at 3400 RPM in a direct drive system coupled with a gasoline engine. The matching flange provides convenient connection to most 7/8” shaft 4 - 7 HP engines. The hollow shafted pump includes a built-in pressure control valve, and chemical injection system. Comes with Thermal Relief Valve and Easy Start Valve (EZ).

Features:
• The "S" version has upgraded grade valves
• 3-Piston alternating volumetric pumps for use on cleaning units
• Check the HOLE in the ARM location relative to the inlet/outlet Port (2nd Picture)
• This pump is Front Mounted (3rd picture)
• Pump body in die-cast aluminum alloy
• Pistons driven by swash plate mechanism
• Two bearing systems, to support the pump shaft and pistons
• Pistons in hardened and tempered steel
• Pump head in aluminum
• Double gasket sealing system
• Intake valves fitted above the pistons for greater efficiency
• Integral regulating valve
• Integral detergent suction system

Specifications:
• Max. Volume: 2.2 GPM
• Max. Discharge Pressure: 2,600 PSI
• Max. Pump Speed: 3,400 RPM
• Shaft Diameter: 7/8” Hollow
• Maximum Horsepower Requirements (Industrial): 5.2 GHP
• Maximum Horsepower Requirements (Standard): 6.4 GHP
• Inlet Port: 3/4" GHA (garden hose)
• Outlet Port: 22mm-14 (Twist Connect)
• Briggs 311039 = SRMW22G26-EZ
• Weight: 6.0 lb.

 

• Triplex Plunger Pump
• Direct Drive with Gas Flange 7-11 HP SAE
• Max. Volume: 2.5 GPM
• Max. Discharge Pressure: 2,600 PSI
• Max. Pump Speed: 3400 RPM
• Shaft Diameter: 3/4” Hollow
• Max. Horsepower Requirements: 6.0 GHP
• Max. Fluid Temp.: 160 degrees F.
• Inlet Ports (2): 1/2" BSP
• Discharge Ports (2): 3/8" BSP
• Drive Side: Standard right
• Forged brass head & valve covers
• Solid ceramic plungers
• Weight: 19.0 lb.

Annovi Reverberi / AR North America RRA E Version with F17 flange series pumps are designed to direct drive on electric NEMA 182 - 184 frame motors ranging from 6.2 – 11.3 EBHP. Intended use for heavy tasks; this triplex plunger pump features the latest in design and technology. Life tested over 2,000 hours at maximum performance. The RRA is a result of our combined 60 years of pumps building experience and expertise

Features:
• Latest in design and technology
• New crankcase style
• High strength forged brass manifold for long term use
• NEW ceramic plungers, thicker wall to help prevent thermal shock
• Stainless steel valves
• Side mount valve seat o-rings
• High quality high pressure seals
• NEW low pressure seal with built in scraper
• Two piece piston guides
• NEW connecting rod with 12% more load surface
• Large side cover sight glass
• Oversized bearings
• Rear cover oil drain
• Forged, precision ground crankshaft

Specifications:
• Max. Volume: 5.5 GPM
• Max. Discharge Pressure: 2,600 PSI
• Max. Pump Speed: 1,750 RPM
• Shaft Diameter: 1-1/8” Hollow
• Max. Horsepower Requirements: 11.3 EBHP
• Max. Fluid Temp.: 140° F.
• Inlet Ports (2): 1/2" Female
• Outlet Ports (2): 3/8" Female
• Oil capacity: 13.35 oz
• Weight: 18.0 lb.

Annovi Reverberi / AR North America RCV D Version with F7 flange series pumps are designed to direct drive on gasoline engines ranging from 5 – 7.0 h.p. Intended use for heavy tasks; this triplex plunger pump features the latest in design and technology. Life tested over 2,000 hours at maximum performance. The RCV is a result of our combined 60 years of pumps building experience and expertise

Features
• Latest in design and technology
• New crankcase style
• High strength forged brass manifold for long term use
• NEW ceramic plungers, thicker wall to help prevent thermal shock
• Stainless steel valves
• Side mount valve seat o-rings
• High quality high pressure seals
• NEW low pressure seal with built in scraper
• Two piece piston guides
• NEW connecting rod with 12% more load surface
• Large side cover sight glass
• Oversized bearings
• Rear cover oil drain
• Forged, precision ground crankshaft

Specifications
• Max. Volume: 2.5 GPM
• Max. Discharge Pressure: 2,700 PSI
• Max. Pump Speed: 3,400 RPM
• Shaft Diameter: 3/4” Hollow
• Max. Horsepower Requirements: 6.2 GHP
• Max. Fluid Temp.: 140° F.
• Inlet Ports (2): 1/2" Female
• Outlet Ports (2): 3/8" Female
• Oil capacity: 9.81 oz
• Weight: 11.0 lb.

Annovi Reverberi / AR North America SJV2.5G27D Axial Radial Pump. This AR SJV series pump is designed for medium duty loads. It spins at 3400 RPM in a direct drive system coupled with a gasoline engine, the matching flange provides convenient connections to most 3/4” shaft 3.5 - 6.5 HP engines. Precision die-cast crankcase with large cooling fins for maximum heat dissipation. Seals and V-Packings designed to continuously lubricate for extended life. Built-in unloader to optimize performance while reducing setup time. Integral trap pressure with fixed chemical injector.

Specifications
• Horizontal Mount Direct Drive with Gas Flange 3-6.5 HP SAE
• Max. Volume: 2.5 GPM
• Max. Discharge Pressure: 2,700 PSI
• Max. Pump Speed: 3,400 RPM
• Shaft Diameter: 3/4” Hollow
• Maximum Horsepower Requirements: 6.0 GHP
• Max. Fluid Temp.: 140º F.
• Inlet Port: 1/2" Male
• Discharge Port: 3/8" Male
• Auxiliary Port: 1/4" Female
• Built In unloader and chemical injector
• Forged brass head & valve covers
• Solid ceramic plungers
• Weight: 11.0 lb.

Annovi Reverberi / AR North America RCV D SX Version with Left Handed F7 flange series pumps are designed to direct drive on gasoline engines ranging from 5 – 7.0 h.p. Intended use for heavy tasks; this triplex plunger pump features the latest in design and technology. Life tested over 2,000 hours at maximum performance. The RCV is a result of our combined 60 years of pumps building experience and expertise

Features
• Latest in design and technology
• New crankcase style
• High strength forged brass manifold for long term use
• NEW ceramic plungers, thicker wall to help prevent thermal shock
• Stainless steel valves
• Side mount valve seat o-rings
• High quality high pressure seals
• NEW low pressure seal with built in scraper
• Two piece piston guides
• NEW connecting rod with 12% more load surface
• Large side cover sight glass
• Oversized bearings
• Rear cover oil drain
• Forged, precision ground crankshaft

Specifications
• Max. Volume: 3.0 GPM
• Max. Discharge Pressure: 2,700 PSI
• Max. Pump Speed: 3,400 RPM
• Shaft Diameter: 3/4” Hollow
• Max. Horsepower Requirements: 7.36 GHP
• Drive Side: Left
• Max. Fluid Temp.: 140° F.
• Inlet Ports (2): 1/2" Female
• Outlet Ports (2): 3/8" Female
• Oil capacity: 9.81 oz
• Weight: 11.0 lb.

Annovi Reverberi / AR North America RCV D Version with F7 flange series pumps are designed to direct drive on gasoline engines ranging from 5 – 7.0 h.p. Intended use for heavy tasks; this triplex plunger pump features the latest in design and technology. Life tested over 2,000 hours at maximum performance. The RCV is a result of our combined 60 years of pumps building experience and expertise

Features
• Latest in design and technology
• New crankcase style
• High strength forged brass manifold for long term use
• NEW ceramic plungers, thicker wall to help prevent thermal shock
• Stainless steel valves
• Side mount valve seat o-rings
• High quality high pressure seals
• NEW low pressure seal with built in scraper
• Two piece piston guides
• NEW connecting rod with 12% more load surface
• Large side cover sight glass
• Oversized bearings
• Rear cover oil drain
• Forged, precision ground crankshaft

Specifications
• Max. Volume: 3.0 GPM
• Max. Discharge Pressure: 2,700 PSI
• Max. Pump Speed: 3,400 RPM
• Shaft Diameter: 3/4” Hollow
• Max. Horsepower Requirements: 7.36 GHP
• Max. Fluid Temp.: 140° F.
• Inlet Ports (2): 1/2" Female
• Outlet Ports (2): 3/8" Female
• Oil capacity: 9.81 oz
• Weight: 11.0 lb.

Annovi Reverberi / AR North America RCV D Version with F8 flange series pumps are designed to direct drive on electric NEMA 56 C motors ranging from 1.5 – 6.0 HP. Intended use for heavy tasks; this triplex plunger pump features the latest in design and technology. Life tested over 2,000 hours at maximum performance. The RCV is a result of our combined 60 years of pumps building experience and expertise

Features
• Latest in design and technology
• New crankcase style
• High strength forged brass manifold for long term use
• NEW ceramic plungers, thicker wall to help prevent thermal shock
• Stainless steel valves
• Side mount valve seat o-rings
• High quality high pressure seals
• NEW low pressure seal with built in scraper
• Two piece piston guides
• NEW connecting rod with 12% more load surface
• Large side cover sight glass
• Oversized bearings
• Rear cover oil drain
• Forged, precision ground crankshaft

Specifications
• Max. Volume: 3.0 GPM
• Max. Discharge Pressure: 2,700 PSI
• Max. Pump Speed: 3,400 RPM
• Shaft Diameter: 3/4” Hollow
• Max. Horsepower Requirements: 5.5 EBHP
• Max. Fluid Temp.: 140° F.
• Inlet Ports (2): 1/2" Female
• Outlet Ports (2): 3/8" Female
• Oil capacity: 9.81 oz
• Weight: 11.0 lb.

Annovi Reverberi / AR North America XMV pump. XMV D Version with F25 flange series pumps are designed to direct drive on gasoline engines ranging from 5 - 7 HP. XMV plunger pumps are used for a wide variety of high pressure washing applications

Features:
• Constructed with die-cast bodies and feature a brass head
• Internal components include special thick solid ceramic plungers for long life and durability
• Precision cast cooling fins are anodized for maximum heat dissipation
• Oversized needle bearings on the drive side, and ball on the non-drive side together with the precision supports assure positive alignment and centering in relation to the crankcase
• One-piece connecting rods are special alloy aluminum, oversized for strength and load disbursement

Specifications:
• Triplex Plunger Pump
• Direct Drive with Gas Flange 3-6.5 HP SAE
• Max. Volume: 3.0 GPM
• Max. Discharge Pressure: 2,700 PSI
• Max. Pump Speed: 3400 RPM
• Shaft Diameter: 3/4” Hollow
• Max. Horsepower Requirements: 7.3 GHP
• Max. Fluid Temp.: 160 degrees F.
• Inlet Ports (2): 1/2" BSP
• Discharge Ports (2): 3/8" BSP
• Drive Side: Standard right
• Forged brass head & valve covers
• Solid ceramic plungers
• Weight: 19.0 lb.

Annovi Reverberi / AR North America RCVU D Version Pump with Unloader Valve, Chemical Injector and Built-In Easy Start Valve. F7 flange series pumps are designed to direct drive on gasoline engines ranging from 5 – 7.0 h.p. Intended use for heavy tasks; this triplex plunger pump features the latest in design and technology. Life tested over 2,000 hours at maximum performance. The RCV is a result of our combined 60 years of pumps building experience and expertise

Features:
• Latest in design and technology
• Intergraded unloader valve and fixed chemical injector
• Triplex pump with Easy Start is smooth starting
• New crankcase style
• High strength forged brass manifold for long term use
• NEW ceramic plungers, thicker wall to help prevent thermal shock
• Stainless steel valves
• Side mount valve seat o-rings
• High quality high pressure seals
• NEW low pressure seal with built in scraper
• Two piece piston guides
• NEW connecting rod with 12% more load surface
• Large side cover sight glass
• Oversized bearings
• Rear cover oil drain
• Forged, precision ground crankshaft

Specifications:
• Max. Volume: 3.0 GPM
• Max. Discharge Pressure: 2,700 PSI
• Max. Pump Speed: 3,400 RPM
• Shaft Diameter: 3/4” Hollow
• Max. Horsepower Requirements: 7.36 GHP
• Max. Fluid Temp.: 140° F.
• Intergraded unloader valve
• Fixed chemical injector
• Built In easy start valve
• Inlet Port: 3/4" FGH (garden hose)
• Outlet Port: 3/8" Male
• Auxiliary Ports (2): (1) 1/2" Female & (1) 3/8” Female
• Oil capacity: 9.81 oz
• Weight: 12.0 lb.

Annovi Reverberi / AR North America RCV 3G27-PKG pump with bolt-on unloader, chemical Injector, thermal valve, QC socket outlet and garden hose inlet. RCV D Version with F7 flange series pumps are designed to direct drive on gasoline engines ranging from 5 - 7 HP. Intended use for heavy tasks; this triplex plunger pump features the latest in design and technology. Life tested over 2,000 hours at maximum performance. The RCV is a result of our combined 60 years of pumps building experience and expertise

Features:
• Latest in design and technology
• New crankcase style
• High strength forged brass manifold for long term use
• NEW ceramic plungers, thicker wall to help prevent thermal shock
• Stainless steel valves
• Side mount valve seat o-rings
• High quality high pressure seals
• NEW low pressure seal with built in scraper
• Two piece piston guides
• NEW connecting rod with 12% more load surface
• Large side cover sight glass
• Oversized bearings
• Rear cover oil drain
• Forged, precision ground crankshaft

Specifications:
• Max. Volume: 3.0 GPM
• Max. Discharge Pressure: 2,700 PSI
• Max. Pump Speed: 3,400 RPM
• Shaft Diameter: 3/4” Hollow
• Max. Horsepower Requirements: 7.36 GHP
• Max. Fluid Temp.: 140° F.
• Oil capacity: 9.81 oz
• Unloader Inlet: 3/4" GH (garden hose)
• Unloader Outlet: 3/8 QC socket
• Weight: 13.1 lb.

Package Components:
• RCV3G27D-F7 pump
• AR VRC-B adjustable unloader with chemical injector
• Thermal relief valve
• 3/8 QC socket
• Garden hose connector with cone filter
• Mounting bolts

This Annovi Reverberi / AR North America SRMW2.4G28-EZ-SX, SRMW24G28-EZ-SX aluminum vertical plunger pump will pump up to 2.4 GPM at 2,800 PSI. It spins at 3400 RPM in a direct drive system coupled with a gasoline engine. The matching flange provides convenient connection to most 7/8” shaft 4 - 7 HP engines. The hollow shafted pump includes a built-in pressure control valve, and chemical injection system. Comes with Thermal Relief Valve and Easy Start Valve (EZ).

Features:
• The "S" version has upgraded grade valves
• 3-Piston alternating volumetric pumps for use on cleaning units
• Pump body in die-cast aluminum alloy
• Pistons driven by swash plate mechanism
• Two bearing systems, to support the pump shaft and pistons
• Pistons in hardened and tempered steel
• Pump head in aluminum
• Double gasket sealing system
• Intake valves fitted above the pistons for greater efficiency
• Integral regulating valve
• Integral detergent suction system

Specifications:
• Max. Volume: 2.4 GPM
• Max. Discharge Pressure: 2,800 PSI
• Max. Pump Speed: 3,400 RPM
• Shaft Diameter: 7/8” Hollow
• Maximum Horsepower Requirements (Industrial): 6.1 GHP
• Maximum Horsepower Requirements (Standard): 7.5 GHP
• Inlet Port: 3/4" GHA (garden hose)
• Outlet Port: 22mm-14 (Twist Connect)
• Weight: 6.0 lb.

This Annovi Reverberi / AR North America SRMW2.4G28-EZ, SRMW24G28-EZ aluminum vertical plunger pump will pump up to 2.4 GPM at 2,800 PSI. It spins at 3400 RPM in a direct drive system coupled with a gasoline engine. The matching flange provides convenient connection to most 7/8” shaft 4 - 7 HP engines. The hollow shafted pump includes a built-in pressure control valve, and chemical injection system. Comes with Thermal Relief Valve and Easy Start Valve (EZ).

Features:
• The "S" version has upgraded grade valves
• 3-Piston alternating volumetric pumps for use on cleaning units
• Pump body in die-cast aluminum alloy
• Pistons driven by swash plate mechanism
• Two bearing systems, to support the pump shaft and pistons
• Pistons in hardened and tempered steel
• Pump head in aluminum
• Double gasket sealing system
• Intake valves fitted above the pistons for greater efficiency
• Integral regulating valve
• Integral detergent suction system

Specifications:
• Max. Volume: 2.4 GPM
• Max. Discharge Pressure: 2,800 PSI
• Max. Pump Speed: 3,400 RPM
• Shaft Diameter: 7/8” Hollow
• Maximum Horsepower Requirements (Industrial): 6.1 GHP
• Maximum Horsepower Requirements (Standard): 7.5 GHP
• Inlet Port: 3/4" GHA (garden hose)
• Outlet Port: 22mm-14 (Twist Connect)
• Weight: 6.0 lb.

The HYD-RTX Series hydraulic drive pump with F50 flange, mounting rails and hydraulic motor

Hydraulic Pump Specifications:
• Sauer-danfoss hydraulic driven pump
• Max. Motor GPM: 18.5
• Max. Motor PSI: 2,320 PSI
• Inlet & Outlet: 3/4"

Pressure Washer Pump Specifications:
• AR Model RTX50 solid shaft pump
• Max. Volume: 13.2 GPM
• Max. Discharge Pressure: 2,900 PSI
• Max. Pump Speed: 1,450 RPM
• Max. Fluid Temp.: 140° F.
• Inlet Ports (2): 1" F
• Discharge Ports (2): 1/2" F
• Weight: 93.7 lb

Annovi Reverberi / AR North America RTX70 Triplex Plunger Pump. The RTX70 delivers up to 18.5 GPM and 2,000 PSI. Spinning at 1,450 RPM, this 30mm sold shafted pump features a nickel plated brass head. Inlet thread is 1” F and discharge thread is 1/2”F.

Features:
• High-strength, non-porous pressed nickel-plated brass head for guaranteed safety and durability
• One-piece extra thick ceramic pistons for exceptional strength
• Stainless steel ball-type intake and delivery valves with high fluido-dynamic efficiency
• Dual sealing system with anti-extrusion ring support and lubrication with low pressure recirculation chambers
• Pump casing in high-strength aluminum alloy with oversized mounts
• Camshaft in forged, treated steel
• Oversized two-piece connecting-rods in low-friction aluminum alloy
• “Premium” quality tapered roller bearings for long lifetime
• Splash lubrication

Specifications:
• Max. Volume: 18.5 GPM
• Max. Discharge Pressure: 2,000 PSI
• Max. Pump Speed: 1,450 RPM
• Shaft Diameter: 30mm Solid
• Max. Horsepower Requirements: 25.4 EBHP
• Max. Fluid Temp.: 140° F.
• Inlet Tread: 1" Female
• Outlet Thread: 1/2" Female
• Oil capacity: 76 oz
• Weight: 72.0 lb.

• AR XWF Triplex Plunger Pump
• Solid Shaft for Belt or Gear Drive
• Max. Volume: 6.87 GPM
• Max. Discharge Pressure: 2,900 PSI
• Max. Pump Speed: 1000 RPM
• Shaft Diameter: 24mm Solid
• Max. Horsepower Requirements: 13.7 EBHP
• Bearings are premium SKF tapered roller bearings that provide extra load support, smoother and lower crankcase running temperatures and overall extended pump life
• Max. Fluid Temp.: 160 degrees F.
• Inlet Ports (2): 3/4" BSP
• Discharge Ports (2): 3/8" BSP
• Drive Side: Standard right
• Forged brass head & valve covers
• Plungers are extra thick solid ceramic titanium impregnated for extended seal and pump life
• Weight: 34.0 lb.

• AR XWF Triplex Plunger Pump
• Solid Shaft for Belt or Gear Drive
• Max. Volume: 7.92 GPM
• Max. Discharge Pressure: 2,900 PSI
• Max. Pump Speed: 1000 RPM
• Shaft Diameter: 24mm Solid
• Max. Horsepower Requirements: 15.8 EBHP
• Bearings are premium SKF tapered roller bearings that provide extra load support, smoother and lower crankcase running temperatures and overall extended pump life
• Max. Fluid Temp.: 160 degrees F.
• Inlet Ports (2): 3/4" BSP
• Discharge Ports (2): 3/8" BSP
• Drive Side: Standard right
• Forged brass head & valve covers
• Plungers are extra thick solid ceramic titanium impregnated for extended seal and pump life
• Weight: 34.0 lb.