Comet Pump

Comet Premium RWS 6040 S Series Triplex Plunger Pump (Left Hand)

• Solid Shaft 24mm for Belt Drive, Gearbox or Flex Couplers
• Crankcase: Die-Cast Aluminum Alloy for Protection Against Corrosion
• Piston Guides are Heat Treated Stainless Steel
• Highly Efficient Stainless Steel Check Valves
• Solid Ceramic Plungers
• Brass Manifold: Forged for Maximum Strength and Longer Life up to 4000 PSI
• One Piece, Solid Bronze Alloy Connection Rods
• High Quality Tapered Roller Bearings
• Large 25 oz oil Capacity Dissipates Heat and Improves Lubrication for Longer Life
• Oil Cap: New Travel/Working Oil Cap
• Max. Volume: 6.0 GPM
• Max. Discharge Pressure: 4,000 PSI
• Max. Pump Speed: 1750 RPM
• Shaft Diameter: 24mm Solid
• Max. Fluid Temp.: 145º F.
• Inlet Ports (2): 1/2" FPT
• Discharge Ports (2): 3/8" FPT
• Drive Side: Left hand
• Weight: 27.0 lb.

Comet LWS 3020 E W/SHIM 2,000 PSI 3.1 GPM Pump

• Triplex Plunger Pump with SHIM
• Max. Volume: 3.1 GPM
• Max. Discharge Pressure: 2,000 PSI · Max. Pump Speed: 1750 RPM
• Shaft Diameter: 5/8” Hollow
• Max. Horsepower Requirements: 4.0 BHP
• Max. Fluid Temp.: 145º degrees F.
• Inlet Ports (2): 1/2" NPT · Discharge Ports (2): 3/8" NPT
• Drive Side: Reversible crankcase for right or left hand mounting
• Forged brass head & valve covers
• Solid ceramic plungers
• Replaces Comet # 6301.0605.00
• Weight: 13.4 lb.

Comet Anti-Extr. Ring

Replaces # 0009.0289.00

Comet Piston Kit, TW 18mm
Replaces Comet Kit # 2409.0116.00

Comet SWS 4040 S Triplex Plunger Hot Water Pump with Kevlar Seals. This solid shaft 24mm pump is designed for Belt Drive, Gearbox or Flex Couplers

Features
• Brass Head
• Reversible Crankcase for Right or Left Hand Mounting
• Hardened Stainless Steel Piston Guides Highly Efficient Stainless Steel Check Valves
• Solid Ceramic Plungers
• High & Low Pressure Seals: High Quality Buna-Textile Packings
• Additional Anti-Extrusion Ring Under the Seal
• Solid Brass Manifolds
• Special Forged Brass Oversized Connecting Rods
• Die-Cast, Anodized Aluminum Crankcase
• Highly Quality Tapered Roller Bearings
• Optimal Oil Bath for High Speed Operation
• 24mm Solid Shaft for Belt Drive, Gearbox or Flex Couplers
• Hot Water Pump with Kevlar Seals

Specifications
• Max. Volume: 4.0 GPM
• Max. Discharge Pressure: 4,000 PSI
• Max. Pump Speed: 1,750 RPM
• Shaft Diameter: 24mm Solid
• Max Temperature: 185° F
• Inlet Ports: 1/2" FBSP
• Outlet Ports: 3/8" FBSP
• Replaces Comet # 6516.0101.00
• Weight: 40.0 lb.

Connection Rod

Replaces # 0205.0044.00

Oil Seal (Replaces 0019.0058.00 & 0019.0111.00)

Comet Hydro Excavation Lance 1/2” x 5' Schedule 80 Aluminum MxM 4,000 PSI

Specifications:
• Length: 5'
• Pipe Material: Schedule 80 aluminum
• Inlet: 1/2” MNPT
• Outlet: 1/2” MNPT
• Max Temp: 300° F.
• Maximum Pressure: 4,000 PSI
• Over 48" surcharge: $4.50 will be added to shipping
• Weight: 5.50 Lbs

Comet Hydro Excavation Lance 1/2” x 6' Schedule 80 Aluminum MxM 4,000 PSI

Specifications:
• Length: 6'
• Pipe Material: Schedule 80 aluminum
• Inlet: 1/2” MNPT
• Outlet: 1/2” MNPT
• Max Temp: 300° F.
• Maximum Pressure: 4,000 PSI
• Over 48" surcharge: $4.50 will be added to shipping
• Weight: 6.50 Lbs

Comet Hydro Excavation Lance 1/2” x 4' Schedule 80 Aluminum MxM 4,000 PSI

Specifications:
• Length: 4'
• Pipe Material: Schedule 80 aluminum
• Inlet: 1/2” MNPT
• Outlet: 1/2” MNPT
• Max Temp: 300° F.
• Maximum Pressure: 4,000 PSI
• Over 48" surcharge: $4.50 will be added to shipping
• Weight: 4.0 Lbs

Injector Kit, VRX Detergent

Replace Comet # 3410.0330.00

Valve Kit, VRX No Return

Replaces Comet # 5026.0262.00

Comet LWS 3525 S 2,500 PSI 3.5 GPM Industrial Duty /Carpet Cleaning Triplex 24mm Solid Shaft Plunger Pump (Includes Hot Water Seals)

Features:
• Forged Bronze Connecting Rods with Lifetime Warranty
• Hardened Stainless Steel Piston Guides
• High Efficiency Stainless Steel Check Valves
• Abrasion Proof, Heat Resistant, Industrial Ceramic Plungers
• High Quality Buna-Textile Double-Sealing V-Packings
• Die-Cast, Anodized Aluminum Crankshaft-Fin Design for Optimal Operating Temperature
• High Quality Oversized Ball Bearings
• Optimal Oil Bath for High Speed Operation
• Designed For Belt Drive, Gearbox or Flex Couplers
• Hot water Seals Installed

Specifications:
• Max. Volume: 3.5 GPM
• Max. Discharge Pressure: 2,500 PSI
• Max. Pump Speed: 1,750 RPM
• Shaft Diameter: Ø 24mm
• Shaft Style: Solid Shaft
• Maximum Horsepower Requirements: 7.95 GHP/ 5.9 EHP
• Inlet Connection: 1/2" FNPT
• Outlet Connection:3/8" FNPT
• Pump Head: Brass or Stainless Steel
• Oil Capacity: 11 fl oz
• LWS 3525 S pump (6301.1201.00) with hot water seals
• Replaces Comet # 6301.1208.00
• Weight: 13.4 lb.

Comet Kit, Oil Seal BXD

Replaces Comet # 5019.0250.00

Comet Gasket

Replaces 1209.0117.00

O-Ring 2.62 X 20.24 MM

Comet Pump 3/8” MPT Solid Brass Inlet Water Filter with Garden Hose Inlet and 1/4” Return Port. The line strainer or filter was designed to remove debris and sediment from the water supply entering the pump. It will prolong the life of a high pressure pump to use a line strainer for any water supply.

Features
• Inlet: 3/4" Female GHT
• Outlet: 3/8" MPT
• Return Port: 1/4" FPT
• Max Flow: 10.5 GPM
• Weight: 0.45 Lbs

Comet Piston Kit for RW Series 18 mm

Replaces 2409.0146.00

Comet Pump 1/2” MPT Solid Brass Inlet Water Filter with Garden Hose Inlet and 1/4” Return Port. The line strainer or filter was designed to remove debris and sediment from the water supply entering the pump. It will prolong the life of a high pressure pump to use a line strainer for any water supply.

Features
• Inlet: 3/4" Female GHT
• Outlet: 1/2" MPT
• Return Port: 1/4" FPT
• Max Flow: 10.5 GPM
• Weight: 0.45 Lbs

Comet Water Seal Kit for RW Series 18 mm

Replaces Comet # 5019.0673.00

• Comet LWD2020E-K Triplex Plunger Pump with Built-In Unloader and Chemical Injector (Left Handed)
• Direct Drive with Electric Flange NEMA 56C
• Max. Volume: 2.1 GPM
• Max. Discharge Pressure: 2,000 PSI
• Max. Pump Speed: 3,400 RPM
• Shaft Diameter: 5/8” Hollow
• Max. Horsepower Requirements: 3.0 BHP
• Max. Fluid Temp.: 145º degrees F.
• Inlet Port: 1/2" NPT
• Discharge Port: 3/8" NPT
• Forged brass head & valve covers
• Solid ceramic plungers
• Replaces Comet # 6303.0161.00
• Weight: 13.4 lb.

Comet FW2 4040 S Solid Shaft Pump for Belt or Gear Drive. The FWS2 is the newest addition to comet’s industrial series of pumps

Features:
• Reversible Crankcase for Easy Right or Left Hand Mounting
• Hardened Stainless Steel Piston Guides
• Highly Efficient Stainless Steel Check Valves
• NEW ceramic plungers, thicker wall to help prevent thermal shock
• Solid Ceramic Plungers
• High & Low Pressure Seals: High Quality Buna-Textile Packings
• Additional Anti-Extrusion Ring under the Seal
• Solid Brass Manifold
• Special Forged Brass Oversized Connecting Rods
• Die-Cast, Anodized Aluminum Crankcase
• High Quality Tapered Roller Bearings

Specifications:
• Max. Volume: 4.0 GPM
• Max. Discharge Pressure: 4,000 PSI
• Solid Shaft for Belt or Gear Drive
• Max. Pump Speed: 1,450 RPM
• Shaft Diameter: 24mm Solid
• Max. Horsepower Requirements: 14.55 GHP
• Inlet Port: 1/2" FPT
• Discharge Port: 3/8" FPT
• Replaces Comet # 6410.0700.00
• Weight: 19.4 lb

1/4 BSPM to 3/8" FNPT Brass Fitting

Comet LWD 3025 G 2500 PSI, 3.0 GPM Comet Direct Drive Pump Assembly with VR54 unloader, thermal relief valve and garden hose inlet connector. This pump has all the necessary components to make installation a breeze!!

PUMP:
• Comet LWD3025G Triplex Plunger Pump
• Direct Drive with Gas Flange 3.0-6.5 HP SAE (2-9/16 center to center)
• Max. Volume: 3.0 GPM
• Max. Discharge Pressure: 2,500 PSI
• Max. Pump Speed: 3,400 RPM
• Shaft Diameter: 3/4” Hollow
• Max. Horsepower Requirements: 6.5 GHP
• Max. Fluid Temp.: 145º F
• Brass head & valve covers
• Forged Bronze Connecting Rods with Lifetime Warranty
• Hardened Stainless Steel Piston Guides
• High Efficiency Stainless Steel Check Valves
• Abrasion Proof, Heat Resistant, Industrial Ceramic Plungers
• High Quality Buna-Textile Double-Sealing V-Packings

COMPONENTS:
• Comet LWD3025G Triplex Plunger Pump
• Mecline VR54 adjustable pressure unloader
• Black bypass hose
• Thermal relief valve
• Inlet filter with 3/4" Female GHT
• 3/8” QC brass socket
• Mounting bolts
• Note: Pumps are not tested prior to shipping and unloader will need to be adjusted
• Weight: 16.0 lb

Comet EWD-K 4042G, EWD 4042 G-K Pump with Built-In Unloader, chemical injector, thermal valve and garden hose inlet connector. This 4, 200 PSI & 4.0 GPM pump is designed to direct drive on gasoline 1” Hollow Shaft engines ranging from 9 - 13 HP

Features
• Built-In adjustable unloader with chemical injector
• 1” Hollow Shaft with SAE J609B flange for coupling to gas engines
• High-strength Brass Pump Head
• New designed reversible carter made in special aluminum alloy
• Stainless –steel hardened piston guides
• Special plugs for dust protection
• O- ring and labyrinth oil seal system between crankcase and rear cover, to reduce oil splashing
• Wide oil level viewer
• Special aluminum alloy conrods made in a single piece
• Top-quality and oversized ball-needle bearings to ensure long durability
• Highly efficient stainless steel check valves with removable plugs for easy inspection
• Solid ceramic plungers, high corrosion and abrasion-proof
• High performance double sealing system

Specifications
• Max. Volume: 4.0 GPM
• Max. Discharge Pressure: 4,200 PSI
• Max. Pump Speed: 3,400 RPM
• Shaft Diameter: 1” Hollow
• Max. Horsepower Requirements: 15.27 GHP

COMPONENTS:
• Comet EWD-K 4042G Triplex Plunger Pump
• Thermal relief valve
• 3/4” Garden Hose Inlet Fitting
• 3/8” QC brass socket
• Mounting bolts
• Chemical injector hose and filter
• Note: Pumps are not tested prior to shipping and unloader will need to be adjusted
• Replaces Comet # 6311.0150.10 & 6311.0162.10
• Weight: 16.10 lb

strong>
• Built-In adjustable unloader with chemical injector
• 1” Hollow Shaft with SAE J609B flange for coupling to gas engines
• High-strength Brass Pump Head
• New designed reversible carter made in special aluminum alloy
• Stainless –steel hardened piston guides
• Special plugs for dust protection
• O- ring and labyrinth oil seal system between crankcase and rear cover, to reduce oil splashing
• Wide oil level viewer
• Special aluminum alloy conrods made in a single piece
• Top-quality and oversized ball-needle bearings to ensure long durability
• Highly efficient stainless steel check valves with removable plugs for easy inspection
• Solid ceramic plungers, high corrosion and abrasion-proof
• High performance double sealing system

Specifications
• Max. Volume: 4.0 GPM
• Max. Discharge Pressure: 4,200 PSI
• Max. Pump Speed: 3,400 RPM
• Shaft Diameter: 1” Hollow
• Max. Horsepower Requirements: 15.27 GHP

COMPONENTS:
• Comet EWD-K 4042G Triplex Plunger Pump
• Thermal relief valve
• 3/4” Garden Hose Inlet Fitting
• 3/8” QC brass socket
• Mounting bolts
• Chemical injector hose and filter
• Note: Pumps are not tested prior to shipping and unloader will need to be adjusted
• Weight: 16.10 lb

The Comet STATIC 1700 Extra Gold Electric Pressure Washer with TotalStop is a complete wall mountable and portable solution. Featuring an all brass Italian built pump producing 2.2 GPM and 1,300 PSI. This packaged unit includes 65’ rubber hose, hose reel and accessories

Features:
• Manufactured in Italy
• Sturdy structure with tubular frame for wall mounting
• Equipped with a quick wall coupling system with safety lock
• Handy support for housing all the accessories
• Standard hose reel with 65’ rubber delivery hose
• Water inlet with cartridge filter
• Comet electrical pump with three axial pistons arranged horizontally with pump at the bottom and an all-metal construction without any plastic used for the structural components
• Pump with brass head on all models
• EASY-START device
• TotalStop device
• Motor thermal protection

STATIC 1700 in Action with some additional accessories on YouTube

Accessories:
• Accessory rack supplied with the high-pressure cleaner
• GC 251 gun with protection
• Bent lance, with adjustable nozzle
• Bent lance, with rotating nozzle
• Rotating brush
• Hose reel with 65’ rubber high-pressure hose
• Foam lance 1L

Specifications:
• Flow: 2.2 GPM
• Max Pressure: 1,300 PSI
• Motor: 1150V/60 Electric
• Amps: 14
• Max Temp: 145° F.
• Manufacturer's Warranty: 12 months limited parts / No labor
• Shipping Weight: 55.60 lb

Comet Pump Brass Pressure Washer Thermal Relief Valve with 3/8" Male Inlet

Specifications:
• Automatically Resets at Cool Down
• Compact Design
• Trip Temperature: 140º F.
• Brass body
• Inlet thread size: 3/8" Male NPT
• Installs in bypass line or inlet side of pump head
• Weight: 1.5 oz

 

Nominal Thread Size (NPT)	1/8"	1/4"	3/8"	1/2"	3/4"	1"
Actual O.D. Measurement	3/8"	1/2"	5/8"	3/4"	1"	1-3/8"

Comet Pump Brass Pressure Washer Thermal Relief Valve with 1/2" Male Inlet

Specifications:
• Automatically Resets at Cool Down
• Compact Design
• Trip Temperature: 140º F.
• Brass body
• Inlet thread size: 1/2" Male NPT
• Installs in bypass line or inlet side of pump head
• Weight: 2.4 oz

 

Nominal Thread Size (NPT)	1/8"	1/4"	3/8"	1/2"	3/4"	1"
Actual O.D. Measurement	3/8"	1/2"	5/8"	3/4"	1"	1-3/8"

>• Brass body
• Inlet thread size: 3/8" Male NPT
• Installs in bypass line or inlet side of pump head
• Weight: 2.4 oz

 

Nominal Thread Size (NPT)	1/8"	1/4"	3/8"	1/2"	3/4"	1"
Actual O.D. Measurement	3/8"	1/2"	5/8"	3/4"	1"	1-3/8"

Comet Pump 12” water broom is used for cleaning vast surfaces quickly, which speeds up cleaning your driveway, deck, sidewalks, and any other surfaces. Using four nozzles, it cleans in forty percent less time than a regular nozzle!

Specifications:
• Size: 12"
• Three: # 1.3 @ 65°
• Casters: 2
• Construction: Aluminum, Steel & Stainless Steel
• Inlet Connection: 1/4 QC Plug
• Max Pressure: 4,000 PSI
• Max Flow: 3.0 GPM
• Weight 2.7 lbs.