Delavan Fluid Power

• Delavan PHA-3120-BD SmartFLO 3222 Series Complete Pump Head Assembly with 3/8 NFT Ports
• Works with Delavan pump models: 3120-421F, 3120-421F-SB, 3120-423F & 3120-423F-SB

• Delavan PHA-3222-BD SmartFLO 3222 Series Complete Pump Head Assembly with 3/4 QA Ports
• Works with Delavan pump models: 3222-421F and 3222-421F-SB

Fairview FLEX-DOT 1485 Series 3/8" x 100' Orange Reinforced Air Brake Tubing - Type 3B. Air brake tube is designed for use with truck, trailer and other mobile air brake and auxiliary systems. This lightweight, flexible and UV stabilized tube is highly resistant to abrasion, oil, grease and road salt

MEETS OR EXCEEDS: D.O.T. F.M.V.S.S. 106 S.A.E. J844 TEST REQUIREMENTS

FLEX-DOT 1485 Series Air Brake Tube is MADE IN CANADA

Compliance:
• All series 1485 tube are designed in compliance with the revised DOT 106 standard which took effect December 24th, 2007
• Fairview’s FLEX-DOT air brake tube is dimensionally identical to the previous air brake tube described in SAE J844 Type A and Type B, and is compatible with the same fittings. Both compression and push-to-connect fittings can be used with FLEX-DOT tube in all applications other than truck to trailer connections, in which push-to-connect fittings are not suitable

Materials:
• Both the core tube and jacket are comprised of a custom formulated elastomer, offering exceptional heat aging, oil resistance, and low temperature flexibility, when compared to previous nylon materials
• With its improved flexibility at all temperatures, the FLEX-DOT tube is easier to install in tight quarters
• The special compound was custom formulated for this application and offers exceptional flexibility even at very low temperatures. Unlike traditional all-nylon tube, the FLEX-DOT elastomer hose can still be flexed at -65C (-85F)

SPECIFICATION SHEET FLEX-DOT SERIES 1485

INSTALLATION DATA SHEET

Specifications:
• Nominal OD: 3/8”
• Inside Diameter ID: 0.251”
• Wall Thickness: 0.062" +/-0.004"
• Length: 100’
• Temperature: -85°F to +200°F, -65°C to +93°C
• Type: 3B, Reinforced
• Color: Orange
• Working Pressure: 350 PSI
• Minimum Burst @ 68°F: 1,400 PSI
• Supported Bend Radius: 1.50”
• Unsupported Bend Radius: 1.50”
• Approx. Weight: 3.2 lbs

Delavan PowerFLO™ 7812 I-Series 2.1 GPM 60 PSI Diaphragm Pump with 3/8” FNPT Ports. Demand Switch – Operates only when liquid flow is required

Features:
• 100% Factory tested
• 2 Year warranty from date of purchase

Motor:
• Type: 12 VDC permanent magnet, totally enclosed, non-ventilated
• Leads: 14 AWG, 6” long with 2-pin connector
• Max Amps: 8.5
• Duty Cycle: See Heat Rise graph

Materials of Construction:
• Motor Shell: Coated Steel
• Housing: Polypropylene
• Valves: Santoprene
• Diaphragm: Santoprene
• Fasteners: Zinc plated

Pump:
• Demand Switch – Operates only when liquid flow is required
• Type: 3-chamber positive displacement
• Capable of being run dry
• Excellent self-priming capability
• Liquid Temperature: 140°F Max.
• Priming Capabilities: 14’
• Max. Flow: 2.1 GPM
• Pressure Shut-Off: 60 PSI
• Inlet/Outlet Ports: 3/8” FNPT
• Packaging: Small box
• Weight: 6.0 lbs

Delavan PowerFLO™ 7822FS Flex I-Series 2.2 GPM 60 PSI Diaphragm Pump with 3/4” Quick Attach Ports. Thanks to the new 3/4” Quick Attach adapter system and bolt pattern, the Flex Pump can fit into most competitor spray systems that use 3/4” quick attach with ease. The new Flex I-Series Pump will be able to replace your old pump and provide a new level of performance and life. You can figuratively speaking “feel the difference in weight and productivity” between the two pumps.

Features:
• 100% Factory tested
• 2 Year warranty from date of purchase
• This demand pump will turn off when the spray gun or boom is turned off, saving energy and increasing the life of the pump

Motor:
• Type: 12 VDC permanent magnet, totally enclosed, non-ventilated
• Leads: 14 AWG, 6” long with 2-pin connector
• Max Amps: 8.5
• Duty Cycle: See Heat Rise graph

Materials of Construction:
• Motor Shell: Coated Steel
• Housing: Polypropylene
• Valves: Santoprene
• Diaphragm: Santoprene
• Fasteners: Stainless Steel

Pump:
• Demand Switch – Operates only when liquid flow is required
• Type: 3-chamber positive displacement
• Capable of being run dry
• Excellent self-priming capability
• Liquid Temperature: 140°F Max.
• Priming Capabilities: 14’
• Max. Flow: 2.2 GPM
• Pressure Shut-Off: 60 PSI
• Inlet/Outlet Ports: 3/4 Quick Attach
• Replaces 7822FS-201-I, 7822FS-201-BBI
• Packaging: Small box
• Weight: 6.0 lbs

Delavan RK-M215VC HD Magnum Repair Kit for M150 & M200 Ceramic

Specifications:
• CERAMIC Includes Seal Assembly for M150/M200, Viton/Ceramic, Frame O-ring Seal, Square Key

Delavan 134-014 HD Magnum Shaft to suit M125 Pump

Delavan RV-80-210-SAE10-S Relief Valve SAE10 21.1 GPM 290 - 3,625 Range 5,075 Max PSI. The purpose of the M40S pressure relief valve is to protect the hydraulic system from malfunctions or failures caused by excessively high pressures in the circuit.

Product Specifications

Specifications:

• Mfg.: FLUID-APP
• Type: M803SC25
• Port Size: SAE 10 (7/8-16 UNF)
• Maximum Flow: 21.1 GPM
• Maximum Pressure : 5,075 PSI
• Range Spring: 290 – 3,625 PSI
• Increase To Turn: 479 PSI
• Oil temperature: -4°F + 176°F
• Max leakage: 0,25 cm3/min - 5 drops/min at 80% of the calibration pressure
• Warranty: Years from date of purchase
• It is necessary to use a filter to protect the valve (advised filtration): 15 μm
• Weight: 2.0 lbs

Delavan VLA-7870-RT Valve Plate/Lower Housing Sub-Assembly

Specifications:
• Works with Delavan 7870 & 7970 FB2 series pumps
• (1) Delavan Lower Housing Assembly LHA-7870
• (1) Delavan Valve Housing Assembly VHA-7870
• Weight: 14.4 oz

Delavan PowerFLO™ 7822FS Flex I-Series 2.2 GPM 60 PSI Diaphragm Pump with 3/4” Quick Attach Ports and Fittings Kit. Thanks to the new 3/4” Quick Attach adapter system and bolt pattern, the Flex Pump can fit into most competitor spray systems that use 3/4” quick attach with ease. The new Flex I-Series Pump will be able to replace your old pump and provide a new level of performance and life. You can figuratively speaking “feel the difference in weight and productivity” between the two pumps.

Features:
• 100% Factory tested
• 2 Year warranty from date of purchase
• This demand pump will turn off when the spray gun or boom is turned off, saving energy and increasing the life of the pump

Motor:
• Type: 12 VDC permanent magnet, totally enclosed, non-ventilated
• Leads: 14 AWG, 6” long with 2-pin connector
• Max Amps: 8.5
• Duty Cycle: See Heat Rise graph

Materials of Construction:
• Motor Shell: Coated Steel
• Housing: Polypropylene
• Valves: Santoprene
• Diaphragm: Santoprene
• Fasteners: Stainless Steel

Quick Connect Fittings Kit:
• (2) 5/8” QA x 3/8" HB Elbow Fittings
• (1) 5/8” QA x 3/8" Straight HB Fitting
• (2) 3/4” to 5/8” Port Adapter
• (2) Slide Connectors for 5/8” Fittings

Pump:
• Demand Switch – Operates only when liquid flow is required
• Type: 3-chamber positive displacement
• Capable of being run dry
• Excellent self-priming capability
• Liquid Temperature: 140°F Max.
• Priming Capabilities: 14’
• Max. Flow: 2.2 GPM
• Pressure Shut-Off: 60 PSI
• Inlet/Outlet Ports: 3/4 Quick Attach
• Replaces 7822FS-201-I, 7822FS-201-BBI
• Packaging: Small box
• Weight: 6.0 lbs

Delavan VLA-7871-RT Valve Plate/Lower Housing Sub-Assembly

Specifications:
• Works with Delavan 7871, 7971 FB3 & 7972 FB6 series pumps
• (1) Delavan Lower Housing Assembly LHA-7871
• (1) Delavan Valve Housing Assembly VHA-7870
• Weight: 15.4 oz

Delavan Detent Kit for MBV Valves.

Install the MBV-DET into an MBV series valve to allow for the detent function

Delavan PowerFLO™ 7812 Series 2.0 GPM 60 PSI Diaphragm Pump with 3/8” FNPT Ports. Demand Switch – Operates only when liquid flow is required

Features:
• Certified to NSF/ANSI Standard 61 & 372
• Made in the USA
• 100% Factory tested
• 2 Year warranty from date of purchase

Motor:
• Type: 12 VDC permanent magnet, totally enclosed, non-ventilated
• Leads: 14 AWG, 6” long with 2-pin connector
• Max Amps: 8.5
• Duty Cycle: See Heat Rise graph

Materials of Construction:
• Motor Shell: Coated Steel
• Housing: Polypropylene
• Valves: Viton
• Diaphragm: Santoprene
• Fasteners: Stainless Steel

NSF/ANSI Certified:
• NSF/ANSI Standard 61 - Drinking Water System Components - Health Effects
• NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act

Pump:
• Demand Switch – Operates only when liquid flow is required
• Type: 3-chamber positive displacement
• Capable of being run dry
• Excellent self-priming capability
• Liquid Temperature: 140°F Max.
• Priming Capabilities: 14’
• Max. Flow: 2.0 GPM
• Pressure Shut-Off: 60 PSI
• Inlet/Outlet Ports: 3/8” FNPT
• Packaging: Small box
• Weight: 5.6 lbs

Delavan PowerFLO™ 7822FS Flex Series 2.2 GPM 60 PSI Diaphragm Pump with 3/4” Quick Attach Ports. Thanks to the new 3/4” Quick Attach adapter system and bolt pattern, the Flex Pump can fit into most competitor spray systems that use 3/4” quick attach with ease. The new Flex Pump will be able to replace your old pump and provide a new level of performance and life. You can figuratively speaking “feel the difference in weight and productivity” between the two pumps. The new Delavan 12 Volt Flex Pumps represent years of testing and improvements, with state of the art components like improved pressure switches, efficient valve design and a new mounting and attachment system. These features create the best value in 12 Volt diaphragm pumps for your sprayer.

Features:
• Certified to NSF/ANSI Standard 61 & 372
• Made in the USA
• 100% Factory tested
• 2 Year warranty from date of purchase
• This demand pump will turn off when the spray gun or boom is turned off, saving energy and increasing the life of the pump

Motor:
• Type: 12 VDC permanent magnet, totally enclosed, non-ventilated
• Leads: 14 AWG, 6” long with 2-pin connector
• Max Amps: 8.5
• Duty Cycle: See Heat Rise graph

Materials of Construction:
• Motor Shell: Coated Steel
• Housing: Polypropylene
• Valves: Viton
• Diaphragm: Santoprene
• Fasteners: Stainless Steel

NSF/ANSI Certified:
• NSF/ANSI Standard 61 - Drinking Water System Components - Health Effects
• NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act

Pump:
• Demand Switch – Operates only when liquid flow is required
• Type: 3-chamber positive displacement
• Capable of being run dry
• Excellent self-priming capability
• Liquid Temperature: 140°F Max.
• Priming Capabilities: 14’
• Max. Flow: 2.2 GPM
• Pressure Shut-Off: 60 PSI
• Inlet/Outlet Ports: 3/4 Quick Attach
• Packaging: Small box
• Weight: 6.0 lbs

Delavan PowerFLO™ 7802 Series 2.0 GPM 60 PSI Diaphragm Pump with 5/8” Quick Attach Ports. Demand Switch – Operates only when liquid flow is required

Features:
• Certified to NSF/ANSI Standard 61 & 372
• Made in the USA
• 100% Factory tested
• 2 Year warranty from date of purchase

Motor:
• Type: 12 VDC permanent magnet, totally enclosed, non-ventilated
• Leads: 14 AWG, 6” long with 2-pin connector
• Max Amps: 8.5
• Duty Cycle: See Heat Rise graph

Materials of Construction:
• Motor Shell: Coated Steel
• Housing: Polypropylene
• Valves: Viton
• Diaphragm: Santoprene
• Fasteners: Stainless Steel

NSF/ANSI Certified:
• NSF/ANSI Standard 61 - Drinking Water System Components - Health Effects
• NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act

Pump:
• Demand Switch – Operates only when liquid flow is required
• Type: 3-chamber positive displacement
• Capable of being run dry
• Excellent self-priming capability
• Liquid Temperature: 140°F Max.
• Priming Capabilities: 14’
• Max. Flow: 2.0 GPM
• Pressure Shut-Off: 60 PSI
• Inlet/Outlet Ports: 5/8 Quick Attach
• Packaging: Small box
• Weight: 5.6 lbs

Delavan PowerMAX™ PML2006-112 2" x 6" x 1-1/8" Hydraulic Cylinder. This Tie-Rod Cylinder has 2,500 PSI Working Pressure and NPT Ports. Delavan PowerMax Hydraulic Cylinders are designed and manufactured to meet the most demanding requirements.

Features:
• Chromed, polished and individually heat-treated shaft provides extended cylinder life
• Built tough enough to stand up to the roughest conditions
• Pins and retainers: high tensile steel, zinc plated to prevent corrosion, comes with cotter pin retainers
• Ports: double ported NPTF for greater flexibility of assembly, unless otherwise stated, cylinders assembled with ports inline
• Piston nut: heavy duty automation grade self locking piston nut holds piston in place under high cycle loading
• Piston: ductile iron, precision machined providing a malleable bearing surface for extended cylinder life
• Piston seal: 90 durometer O-ring with anti extrusion back up washers provide sealing under high load conditions
• Tie-rods: high tensile steel to prevent failure under high pressure
• Cylinder shaft: high strength, hard chrome plated shaft provides extended cylinder life in harsh applications
• Tube: precision finished skive and burnished heavy wall steel tubing for extended seal and cylinder life
• Rod seal: Premium Double Lip Polyurethane BS profile using a double lip design for leak-free performance throughout the pressure range and longer life expectancy
• Rod cap and clevis cap: ductile iron comes with drilled oil passages, offering increased bearing surface for high shock and side load applications
• Rod wiper: Polyurethane AN or D Style provides a tough/hard material to remove contaminants from shaft surface
• Rod clevis: ductile iron able to withstand continuous high load without wear or fracture
• All cylinders are 100% hydraulically tested up to 1.5 working pressure

Specifications:
• Bore: 2.0”
• Stroke: 6”
• Rod Diameter: 1.125”
• Working Pressure: 2,500 PSI
• Pin to Pin Center Retracted x Extended: 16-1/4” x 22-1/4”
• Clevis Pin Diameter: 1”
• Port Size: 3/8” FNPT
• Max Rated PSI on Full Extension: Full PSI
• Max Rated Column Load on Full Extension: 7,854 Lbs
• Packaging: Small box
• Warranty: 3 Years from date of purchase
• Weight: 17.05 lbs