Delavan Fluid Power

Delavan PowerFLO™ 7822FS Flex I-Series 2.2 GPM 60 PSI Diaphragm Pump with 3/4” Quick Attach Ports and Fittings Kit. Thanks to the new 3/4” Quick Attach adapter system and bolt pattern, the Flex Pump can fit into most competitor spray systems that use 3/4” quick attach with ease. The new Flex I-Series Pump will be able to replace your old pump and provide a new level of performance and life. You can figuratively speaking “feel the difference in weight and productivity” between the two pumps.

Features:
• 100% Factory tested
• 2 Year warranty from date of purchase
• This demand pump will turn off when the spray gun or boom is turned off, saving energy and increasing the life of the pump

Motor:
• Type: 12 VDC permanent magnet, totally enclosed, non-ventilated
• Leads: 14 AWG, 6” long with 2-pin connector
• Max Amps: 8.5
• Duty Cycle: See Heat Rise graph

Materials of Construction:
• Motor Shell: Coated Steel
• Housing: Polypropylene
• Valves: Santoprene
• Diaphragm: Santoprene
• Fasteners: Stainless Steel

Quick Connect Fittings Kit:
• (2) 5/8” QA x 3/8" HB Elbow Fittings
• (1) 5/8” QA x 3/8" Straight HB Fitting
• (2) 3/4” to 5/8” Port Adapter
• (2) Slide Connectors for 5/8” Fittings

Pump:
• Demand Switch – Operates only when liquid flow is required
• Type: 3-chamber positive displacement
• Capable of being run dry
• Excellent self-priming capability
• Liquid Temperature: 140°F Max.
• Priming Capabilities: 14’
• Max. Flow: 2.2 GPM
• Pressure Shut-Off: 60 PSI
• Inlet/Outlet Ports: 3/4 Quick Attach
• Replaces 7822FS-201-I, 7822FS-201-BBI
• Packaging: Small box
• Weight: 6.0 lbs

Delavan VLA-7870-RT Valve Plate/Lower Housing Sub-Assembly

Specifications:
• Works with Delavan 7870 & 7970 FB2 series pumps
• (1) Delavan Lower Housing Assembly LHA-7870
• (1) Delavan Valve Housing Assembly VHA-7870
• Weight: 14.4 oz

Delavan RV-80-210-SAE10-S Relief Valve SAE10 21.1 GPM 290 - 3,625 Range 5,075 Max PSI. The purpose of the M40S pressure relief valve is to protect the hydraulic system from malfunctions or failures caused by excessively high pressures in the circuit.

Product Specifications

Specifications:

• Mfg.: FLUID-APP
• Type: M803SC25
• Port Size: SAE 10 (7/8-16 UNF)
• Maximum Flow: 21.1 GPM
• Maximum Pressure : 5,075 PSI
• Range Spring: 290 – 3,625 PSI
• Increase To Turn: 479 PSI
• Oil temperature: -4°F + 176°F
• Max leakage: 0,25 cm3/min - 5 drops/min at 80% of the calibration pressure
• Warranty: Years from date of purchase
• It is necessary to use a filter to protect the valve (advised filtration): 15 μm
• Weight: 2.0 lbs

Delavan 134-014 HD Magnum Shaft to suit M125 Pump

Delavan RK-M215VC HD Magnum Repair Kit for M150 & M200 Ceramic

Specifications:
• CERAMIC Includes Seal Assembly for M150/M200, Viton/Ceramic, Frame O-ring Seal, Square Key

Delavan PowerFLO™ 7822FS Flex I-Series 2.2 GPM 60 PSI Diaphragm Pump with 3/4” Quick Attach Ports. Thanks to the new 3/4” Quick Attach adapter system and bolt pattern, the Flex Pump can fit into most competitor spray systems that use 3/4” quick attach with ease. The new Flex I-Series Pump will be able to replace your old pump and provide a new level of performance and life. You can figuratively speaking “feel the difference in weight and productivity” between the two pumps.

Features:
• 100% Factory tested
• 2 Year warranty from date of purchase
• This demand pump will turn off when the spray gun or boom is turned off, saving energy and increasing the life of the pump

Motor:
• Type: 12 VDC permanent magnet, totally enclosed, non-ventilated
• Leads: 14 AWG, 6” long with 2-pin connector
• Max Amps: 8.5
• Duty Cycle: See Heat Rise graph

Materials of Construction:
• Motor Shell: Coated Steel
• Housing: Polypropylene
• Valves: Santoprene
• Diaphragm: Santoprene
• Fasteners: Stainless Steel

Pump:
• Demand Switch – Operates only when liquid flow is required
• Type: 3-chamber positive displacement
• Capable of being run dry
• Excellent self-priming capability
• Liquid Temperature: 140°F Max.
• Priming Capabilities: 14’
• Max. Flow: 2.2 GPM
• Pressure Shut-Off: 60 PSI
• Inlet/Outlet Ports: 3/4 Quick Attach
• Replaces 7822FS-201-I, 7822FS-201-BBI
• Packaging: Small box
• Weight: 6.0 lbs

Delavan PowerFLO™ 7812 I-Series 2.1 GPM 60 PSI Diaphragm Pump with 3/8” FNPT Ports. Demand Switch – Operates only when liquid flow is required

Features:
• 100% Factory tested
• 2 Year warranty from date of purchase

Motor:
• Type: 12 VDC permanent magnet, totally enclosed, non-ventilated
• Leads: 14 AWG, 6” long with 2-pin connector
• Max Amps: 8.5
• Duty Cycle: See Heat Rise graph

Materials of Construction:
• Motor Shell: Coated Steel
• Housing: Polypropylene
• Valves: Santoprene
• Diaphragm: Santoprene
• Fasteners: Zinc plated

Pump:
• Demand Switch – Operates only when liquid flow is required
• Type: 3-chamber positive displacement
• Capable of being run dry
• Excellent self-priming capability
• Liquid Temperature: 140°F Max.
• Priming Capabilities: 14’
• Max. Flow: 2.1 GPM
• Pressure Shut-Off: 60 PSI
• Inlet/Outlet Ports: 3/8” FNPT
• Packaging: Small box
• Weight: 6.0 lbs

Fairview FLEX-DOT 1485 Series 3/8" x 100' Orange Reinforced Air Brake Tubing - Type 3B. Air brake tube is designed for use with truck, trailer and other mobile air brake and auxiliary systems. This lightweight, flexible and UV stabilized tube is highly resistant to abrasion, oil, grease and road salt

MEETS OR EXCEEDS: D.O.T. F.M.V.S.S. 106 S.A.E. J844 TEST REQUIREMENTS

FLEX-DOT 1485 Series Air Brake Tube is MADE IN CANADA

Compliance:
• All series 1485 tube are designed in compliance with the revised DOT 106 standard which took effect December 24th, 2007
• Fairview’s FLEX-DOT air brake tube is dimensionally identical to the previous air brake tube described in SAE J844 Type A and Type B, and is compatible with the same fittings. Both compression and push-to-connect fittings can be used with FLEX-DOT tube in all applications other than truck to trailer connections, in which push-to-connect fittings are not suitable

Materials:
• Both the core tube and jacket are comprised of a custom formulated elastomer, offering exceptional heat aging, oil resistance, and low temperature flexibility, when compared to previous nylon materials
• With its improved flexibility at all temperatures, the FLEX-DOT tube is easier to install in tight quarters
• The special compound was custom formulated for this application and offers exceptional flexibility even at very low temperatures. Unlike traditional all-nylon tube, the FLEX-DOT elastomer hose can still be flexed at -65C (-85F)

SPECIFICATION SHEET FLEX-DOT SERIES 1485

INSTALLATION DATA SHEET

Specifications:
• Nominal OD: 3/8”
• Inside Diameter ID: 0.251”
• Wall Thickness: 0.062" +/-0.004"
• Length: 100’
• Temperature: -85°F to +200°F, -65°C to +93°C
• Type: 3B, Reinforced
• Color: Orange
• Working Pressure: 350 PSI
• Minimum Burst @ 68°F: 1,400 PSI
• Supported Bend Radius: 1.50”
• Unsupported Bend Radius: 1.50”
• Approx. Weight: 3.2 lbs

• Delavan PHA-3120-BD SmartFLO 3222 Series Complete Pump Head Assembly with 3/8 NFT Ports
• Works with Delavan pump models: 3120-421F, 3120-421F-SB, 3120-423F & 3120-423F-SB

• Delavan PHA-3222-BD SmartFLO 3222 Series Complete Pump Head Assembly with 3/4 QA Ports
• Works with Delavan pump models: 3222-421F and 3222-421F-SB

Delavan VLA-5830-RT Valve Plate/Lower Housing Sub-Assembly

Specifications:
• Works with Delavan 5830 & 5930 series pumps
• (1) Delavan Lower Housing Assembly LHA-5830
• (1) Delavan Valve Housing Assembly VHA-5800
• Weight: 14.4 oz

Delavan VLA-5836-RT Valve Plate/Lower Housing Sub-Assembly

Specifications:
• Works with Delavan 5836 & 5936 series pumps
• (1) Delavan Lower Housing Assembly LHA-5836
• (1) Delavan Valve Housing Assembly VHA-5800
• Weight: 14.4 oz

Delavan VLA-5840-RT Valve Plate/Lower Housing Sub-Assembly

Specifications:
• Works with Delavan 5840 & 5940 series pumps
• (1) Delavan Lower Housing Assembly LHA-5840
• (1) Delavan Valve Housing Assembly VHA-5800
• Weight: 14.4 oz

Delavan VLA-5850-RT Valve Plate/Lower Housing Sub-Assembly

Specifications:
• Works with Delavan 5850 & 5950 series pumps
• (1) Delavan Lower Housing Assembly LHA-5850
• (1) Delavan Valve Housing Assembly VHA-5800
• Weight: 14.4 oz

• Delavan PH-7802-PS Complete Pump Head Assembly w/ 5/8" QA Ports
• Works with Delavan 7802-201 and 7802-201-SB pumps with pressure switch

• Delavan Lower Housing Assembly
• Works with Delavan 7871 & 7971 FB3 series pumps

Delavan RV-50-210-SAE10-S Relief Valve SAE10 13.2 GPM 295 - 3,045 Range 5,075 Max PSI. The purpose of the M40S pressure relief valve is to protect the hydraulic system from malfunctions or failures caused by excessively high pressures in the circuit.

Product Specifications

Specifications:

• Mfg.: FLUID-APP
• Type: M403SC21
• Port Size: SAE 10 (7/8-16 UNF)
• Maximum Flow: 13.2 GPM
• Maximum Pressure : 5,075 PSI
• Range Spring: 295 – 3,045 PSI
• Increase To Turn: 479 PSI
• Oil temperature: -4°F + 176°F
• Max leakage: 0,25 cm3/min - 5 drops/min at 80% of the calibration pressure
• Warranty: Years from date of purchase
• It is necessary to use a filter to protect the valve (advised filtration): 15 μm
• Weight: 1.54 lbs

Delavan 90600 forged steel 540 RPM quick coupler. Quick couplers provide quick and simple on-off installation

Specifications
• For 5/8” Diameter pump shaft
• For 1-3/8” Diameter PTO
• Single Speed: 540 RPM
• Body: Forged steel
• Collar: Nylon
• Tooth/Spline: 6
• Weight: 1.90

• Delavan Complete Pump Head Assembly w/ 3/4" QA Ports
• Works with Delavan 7822FS series and 7822FS I-Series pumps with pressure switch

• Delavan Complete Pump Head Assembly w/ 3/8” FNPT Ports
• Works with Delavan 7812 series and 7812 I-Series pumps with pressure switch
• Replaces PH-7812-D

Delavan 90700 forged steel 540 RPM quick coupler. Quick couplers provide quick and simple on-off installation

Specifications
• Use with Delavan 7900 & 8900 series pumps
• For 15/16” Diameter pump shaft
• For 1-3/8” Diameter PTO
• Single Speed: 540 RPM
• Body: Forged steel
• Collar: Nylon
• Tooth/Spline: 6
• Weight: 1.90

Delavan PowerMAX™ Stroke Control Kit 2 Fits 1-3/4" to 2" Cylinder Shafts

• Delavan UHA-7900-B Upper Housing Assembly
• Works with Delavan 7970/7971 FB2 & FB3 & 7972 FB6 QA series pumps with bypass
• Upper housing with 3/4" Quick Aattach Ports
• Includes bypass valve

Delavan 50101-1 set screw coupler. For 5/8” diameter electric motor or gas engine; 5/8” pump shaft; 2600 RPM; mild steel with set screws

Specifications:
• Use with Delavan 4400 series pumps
• For 5/8” Diameter electric motor or gas engine
• Max. Operating Speed: 2,600 RPM
• Mild steel construction
• Weighs 0.60 lbs

• Delavan UHA-7900-PS Upper Housing Assembly
• Works with Delavan 7970/7971 FB2 & FB3 QA series pumps with pressure switch
• Upper housing with 3/4" Quick Aattach Ports
• Includes pressure switch & relay

Delavan 35745 HD Magnum Repair Kit (Old Style)

Specifications:
• Old Style Delavan Centrifugal Pump Repair Kits For centrifugal pump models 34945-1 and 35566-1.
• Kit contains Viton/ceramic seal, gasket, hardware, and instructions

• Delavan UHA-7800-PS Upper Housing Assembly
• Works with Delavan 7870/7871 FB2 & FB3 series pumps with pressure switch
• Upper housing with 1/2" FNPT Ports
• Includes pressure switch & relay

• Delavan UHA-7800-B Upper Housing Assembly
• Works with Delavan 7870/7871 FB2 & FB3 series pumps with bypass
• Upper housing with 1/2" FNPT Ports
• Includes bypass valve

Delavan PM-XH7006 Rod Clevis 4" & 5" Bores, 1.5 -12 UNF x 1" Pin Hole

Specifications:
• Bore: 4" & 5”
• Rod Diameter: 1.5”
• Pin Hole Diameter : 1”
• Weight: 4.8 lbs

10 Micron Delavan Model ESP-034-P10 Universal Hydraulic Oil Filter & Aluminum Holder 3/4” NPT. Universal hydraulic system return line filter for log splitters, small tractors and other power equipment

Features:
• 2.5x finer than standard filters
• High efficiency – High capacity
• Traps dirt and contaminants, #1 killer of hydraulic systems

Specifications:
• 10 Micron nominal particulate filtration
• Maximum pressure 170 PSI
• Meets SAE std of USA
• Inlet/Outlet Ports: 3/4” NPT
• Dimension 3.75” x 7”
• Weight: 2.1 lbs

• Delavan Upper Housing Assembly
• Works with Delavan 5900 series pumps with Bypass
• Upper housing with 3/4 quick attach ports
• Includes bypass valve

Delavan 25228 Repair Kit for 7 Roller Pump W/ 7-3/4" Rollers (Old Style)

Specifications:
• Old Style Delavan Roller Pump Repair Kits Kit contains rollers, shaft seals, O-rings and instructions
• Delavan pump 77-4111

Delavan 90300 die cast aluminum multi-speed quick coupler. Quick couplers provide quick and simple on-off installation

Specifications
• Use with Delavan 7900 & 8900 series pumps
• For 15/16” Diameter pump shaft
• For 1-3/8” Diameter PTO
• Dual Speed: 540/1,000 RPM
• Body: Corrosion-resistant cast aluminum
• Collar: Nylon
• Tooth/Spline: 9
• Weight: 2.15