General Pump

General Pump 100323 5,000 PSI Easy Start Valve 3/8” NPT-M Inlet & 1/4” Hose Barb. Eases system start-up. Especially useful for engine-driven pressure washers

Features:
• Fits any brand pump
• Max working pressure of 5,000 PSI
• Designed and made in the USA
• Long-life construction
• Improved seal design limits leaks

Specifications:
• Maximum Pressure: 5,000 PSI
• Max Volume: 8 GPM
• Maximum Temperature: 195° F
• Inlet: 3/8" NPT-M
• Outlet: 1/4” Hose Barb
• Materials: Brass, Stainless Steel, Thermoplastic
• Weight: 0.25 lbs

General Pump PTP™ Series Pressure Washer Thermal Relief Valve with 3/8" Male Inlet. Protects the pump from damaging heat build-up while it is in bypass mode. The thermal relief valve, sensing a rise in temperature, opens and discharges a small amount of heated fluid. This allows cooler water to enter the system and cool the pump. When the gun is discharged the cooler water will cause the valve to close immediately.

Specifications:
• Compact Design - Shorter overall length
• Trip Temperature: 190º F.
• Brass body
• Inlet thread size: 3/8" MPT
• 1/4” Brass hose barb
• Mounts easily in the pump manifold,inlet water supply or bypass loop plumbing
• Weight: 1.5 oz

Specifications:
• Compact Design - Shorter overall length
• Trip Temperature: 190º F.
• Brass body
• Inlet thread size: 1/2" MPT
• 1/4” Brass hose barb
• Mounts easily in the pump manifold,inlet water supply or bypass loop plumbing
• Weight: 1.5 oz

General Pump 2100472 Low Pressure In-line Water Filter 1/2” NTP-F x 1/2” NTP-M with 1/4" Bypass Ports

Features
• Low-pressure in-line filter
• Rigid construction
• Stainless Steel mesh filter
• Die cast aluminum (anodized) housing and plastic cap
• No tools required for cleaning
• Ports for bypass hose and gauge

Specifications
• Max Volume: 8.0 GPM
• Maximum Pressure: 145 PSI
• Temperature: 176° F
• Filter: 50 Mesh
• Inlet: 1/2” NTP-F
• Outlet: 1/2” NPT-M
• Bypass Ports: 1/4” F
• Materials: Aluminum, Brass, Plastic, Buna-N
• Weight: 0.30 Lbs

General Pump 2100203 Swivel Repair Kit (Minor) for Duct Cleaner & Hammerhead Surface Cleaners

Specifications:
• Repair Kit For 2103220, 2103226 & 2103293 Swivels
• Weighs 0.95 lbs

General Pump DGE4012NT Hot/Cold Water Open Spray Gun (No Trigger) 4,000 PSI 12 GPM

Features:
• Always open / no trigger
• Additional venting for excellent high temperature performance
• Large comfortable hand grip to accommodate work gloves

Specifications:
• Max Volume: 12 GPM
• Max Pressure: 4,000 PSI
• Max Temp: 320° F.
• Inlet: 3/8" NPT-F
• Outlet: 1/4" NPT-F
• Note: Open, No Trigger
• Weight: 1.0 lbs

12 Pack General Pump D11008 Quick Disconnect Coupler Plugs Hardened Steel Zinc Plated 3/8” x 3/8" NPT-F 4,000 PSI

Features:
• Quick disconnect design
• Hardened Steel Zinc Plated

Package Contents:
• 12 QD Plugs

Specifications:
• Quick Disconnect Coupler: Plug
• Body Material: Hardened Steel
• Plug Size: 3/8"
• Thread: 3/8” NPT-F
• Max Temp: 175°
• Max Operating Pressure: 4,000 PSI
• Weight: 1.2 lb

General Pump D10091 Quick Disconnect Coupler Socket Stainless Steel 1/2” x 1/2" NPT-M 5,000 PSI

Features:
• Quick disconnect design
• 304 Stainless steel
• EPDM O-Ring

Specifications:
• Quick Disconnect Coupler: Socket
• Body Material: 304 Stainless steel
• Socket Size: 1/2"
• Thread: 1/2” NPT-M
• Max Temp: 175°
• Max Operating Pressure: 5,000 PSI
• Replaces QCS3MSS
• Weight: 0.30 lb

General Pump D10090 Quick Disconnect Coupler Socket Stainless Steel 1/2” x 1/2" NPT-F 5,000 PSI

Features:
• Quick disconnect design
• 304 Stainless steel
• EPDM O-Ring

Specifications:
• Quick Disconnect Coupler: Socket
• Body Material: 304 Stainless steel
• Socket Size: 1/2"
• Thread: 1/2” NPT-F
• Max Temp: 175°
• Max Operating Pressure: 5,000 PSI
• Replaces QCS3FSS
• Weight: 0.35 lb

General Pump 100970 5,000 PSI Stainless Steel Easy Start Valve 3/8” NPT-M Inlet & 1/4" Hosebarb. Eases system start-up. Especially useful for engine-driven pressure washers

Features:
• Fits any brand pump
• All Stainless Steel Construction
• Designed and made in the USA
• Long-life construction
• Improved seal design limits leaks
• Not re-buildable

Specifications:
• Maximum working pressure: 5,000 PSI
• Flow: 8 GPM
• Maximum Temperature: 195° F
• Inlet: 3/8" NPT-M
• Outlet: 1/4” Hose Barb
• Weight: 0.25 lbs

General Pump #2.1mm Fixed Chemical Injector, High Draw, Chemical Draw 20% with 3/8" NPT-M. This 20% fixed flow chemical injector is connected to the downstream side of the pressure pump and is activated when using a low pressure soap nozzle. Choose size based on flow rate of your pressure washer

Features
• 20% injection draw rate
• Made in the USA
• A cost effective solution to your chemical application needs

Injector Specifications:
• Size: # 2.1 mm (3.0 to 5.0 GPM)
• Max Operating Pressure: 4,500 PSI
• Max Temperature: 195° F
• Inlet: 3/8” NPT-M
• Outlet: 3/8” NPT-M
• Chemical Port: 1/4” Hose Barb
• Materials: Brass, Stainless Steel, Viton
• Note: If between sizes, choose the smaller injector size
• Weight: 0.30 lbs

General Pump 5,500 PSI High Pressure Inline Filter, 1/4” QD Plug x 1/4” NPT-M. Extend the life of your rotating or variable nozzle with an inlet filter

Features:
• 100 Mesh Screen
• 303 SS w/Brass Outlet

Specifications:
• Max. Pressure: 5,500 PSI
• Max. Volume: 8.0 GPM
• Screen: 100 Mesh
• Maximum Temperature: 200° F
• Inlet: 1/4" QD Plug
• Outlet: 1/4" NPT-M
• Materials: Brass, Stainless Steel, Buna-N
• Weight: 0.25 lbs.

General Pump DSN14F Steam Nozzle Blank 1/4" NPT-F, Drill to Size

Features:
• Strong brass construction
• Drill to size
• Multi-step expansion chamber
• BEFORE USE, DRILL ORIFICE TO RECOMMENDED NOZZLE SIZE!
• DO NOT TOUCH OR REMOVE WHEN HOT!

Specifications:
• Maximum Operating Pressure: 1,450 PSI
• Inlet Port: 1/4” NPT-F
• Material: Brass
• Dimensions 0.75” Hex x 2.6” Long
• Cross Reference: 373702. 7102217, 87109570
• Weighs 0.20 lbs

General Pump DF07550 Clear Bowl Inlet Filter / Strainer 3/4" NPT-F 50 Mesh

Features
• Keeps debris out of pump
• Clear plastic bowl makes it easy to see when cleaning is required
• 50 mesh, stainless steel mesh screen
• Easy to install
• Easy to disassemble and assemble for cleaning
• Made with durable long lasting materials

Specifications
• Bowl: Polycarbonate
• Body: Nylon
• Screen: Stainless steel
• O-Ring: EPDM
• Maximum Pressure at 125° F: 100 PSI
• Maximum Pressure at 70° F: 150 PSI
• Inlet: 3/4” NPT-F
• Outlet: 3/4” NPT-F
• Weight: 0.50 Lbs

General Pump DF07580 Clear Bowl Inlet Filter / Strainer 3/4" NPT-F 80 Mesh

Features
• Keeps debris out of pump
• Clear plastic bowl makes it easy to see when cleaning is required
• 80 mesh, stainless steel mesh screen
• Easy to install
• Easy to disassemble and assemble for cleaning
• Made with durable long lasting materials

Specifications
• Bowl: Polycarbonate
• Body: Nylon
• Screen: Stainless steel
• O-Ring: EPDM
• Maximum Pressure at 125° F: 100 PSI
• Maximum Pressure at 70° F: 150 PSI
• Inlet: 3/4” NPT-F
• Outlet: 3/4” NPT-F
• Weight: 0.50 Lbs

General Pump #2.3mm Fixed Chemical Injector, High Draw, Chemical Draw 20% with 3/8" NPT-M. This 20% fixed flow chemical injector is connected to the downstream side of the pressure pump and is activated when using a low pressure soap nozzle. Choose size based on flow rate of your pressure washer

Features
• 20% injection draw rate
• Made in the USA
• A cost effective solution to your chemical application needs

Injector Specifications:
• Size: # 2.3 mm (5.0 to 8.0 GPM)
• Max Operating Pressure: 4,500 PSI
• Max Temperature: 195° F
• Inlet: 3/8” NPT-M
• Outlet: 3/8” NPT-M
• Chemical Port: 1/4” Hose Barb
• Materials: Brass, Stainless Steel, Viton
• Note: If between sizes, choose the smaller injector size
• Weight: 0.30 lbs

General Pump #1.8mm Fixed Chemical Injector, High Draw, Chemical Draw 20% with 3/8" NPT-M. This 20% fixed flow chemical injector is connected to the downstream side of the pressure pump and is activated when using a low pressure soap nozzle. Choose size based on flow rate of your pressure washer

Features
• 20% injection draw rate
• Made in the USA
• A cost effective solution to your chemical application needs

Injector Specifications:
• Size: # 1.8 mm (2.0 to 3.0 GPM)
• Max Operating Pressure: 4,500 PSI
• Max Temperature: 195° F
• Inlet: 3/8” NPT-M
• Outlet: 3/8” NPT-M
• Chemical Port: 1/4” Hose Barb
• Materials: Brass, Stainless Steel, Viton
• Note: If between sizes, choose the smaller injector size
• Weight: 0.30 lbs

1/4” SJNR General Pump # 4.5 Rotating Sewer Jet Nozzle 5,000 PSI.

Features
• Side ports impact the sides of the pipe
• Polishes and maximizes line recovery
• Rear facing nozzles advance hose through pipe
• Heat-treated Stainless Steel nozzles are wear and corrosion resistant
• Great for pipe, sewer and drain cleaning
• Compact design allows for maneuverability and cornering within pipes
• High pressure nozzles are sized to match the flow and pressure specifications of the equipment
• Works best on 2" to 4" Pipes

Specifications
• Nozzle Size: # 4.5
• Material: Stainless steel & Brass
• Maximum Pressure: 5,000 PSI
• Inlet: 1/4” NPT-F
• Outside Diameter (O.D.): .67”
• Length: 1.34”
• Weight: 1.4 oz

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

1/4” SJNR General Pump # 3.0 Rotating Sewer Jet Nozzle 5,000 PSI.

Features
• Side ports impact the sides of the pipe
• Polishes and maximizes line recovery
• Rear facing nozzles advance hose through pipe
• Heat-treated Stainless Steel nozzles are wear and corrosion resistant
• Great for pipe, sewer and drain cleaning
• Compact design allows for maneuverability and cornering within pipes
• High pressure nozzles are sized to match the flow and pressure specifications of the equipment
• Works best on 2" to 4" Pipes

Specifications
• Nozzle Size: # 3.0
• Material: Stainless steel & Brass
• Maximum Pressure: 5,000 PSI
• Inlet: 1/4” NPT-F
• Outside Diameter (O.D.): .67”
• Length: 1.34”
• Weight: 1.4 oz

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart