General Pump

General TSS1511 Triplex Plunger Pump (Left Handed). The preferred pump frame in the pressure cleaning industry

Features:
• Forged brass manifold with an exclusive lifetime warranty
• Large-capacity, die-cast, anodized aluminum oil-bath crankcase
• Over-sized connecting rods for maximum life
• Solid ceramic plungers with continuously lubricated packings
• Unitized stainless steel inlet and discharge valves
• Designed for suction applications
• Manifold with fine thread valve caps

Specifications Sheet

WARNING: High Pressure Systems require a primary pressure regulating device (i.e. regulator, unloader) and a secondary pressure relief device (i.e. pop-off valve, relief valve). Failure to install such relief devices properly could result in personal injury or damage to pump or property. GP and PRI Industries do not assume any liability or responsibility for the operation of the user’s high pressure system.

Specifications:
• Triplex Plunger Pump
• Solid Shaft for Belt or Gear Drive
• Max. Volume: 4.0 GPM
• Max. Discharge Pressure: 3,500 PSI
• Max. Pump Speed: 1450 RPM
• Shaft Diameter: 24mm Solid
• Max. Horsepower Requirements: 13.0 GHP
• Max. Fluid Temp.: 165 degrees F.
• Inlet Ports (2): 1/2" BSP
• Discharge Ports (2): 3/8" BSP
• Drive Side: Left
• Forged brass head & valve covers
• Solid ceramic plungers
• Note: Item for sale is PUMP ONLY as shown in picture and does not include unloader which is required for proper operation
• Weight: 32.0 lb.

General Pump DSW9038SS Stainless Steel Swivel Coupling 3/8"NPT-F 5,000 PSI

Specifications Sheet

Specifications
• Max Pressure: 5,000 PSI
• Max Temp: 250° F.
• Port Size 3/8” NPT-18
• Through Hole: 1/2”
• Material: Stainless Steel, XNBR, Teflon
• Dimensions: 3" x Ø1.6"
• Weight: 17.5 oz

General Pump DSW9012SS Stainless Steel Swivel Coupling 1/2"NPT-F 5,000 PSI

Specifications Sheet

Specifications
• Max Pressure: 5,000 PSI
• Max Temp: 250° F.
• Port Size 1/2” NPT-14
• Through Hole: 1/2”
• Material: Stainless Steel, XNBR, Teflon
• Dimensions: 3" x Ø1.6"
• Weight: 17.5 oz

General Pump 103073 Assembly, Pilot Valve

General Pump 100995 Capillary Style 70° - 250° Adjustable Thermostat 6,000 PSI. Probe Style Thermostats, Insulated SS Capilary Copper Immersion Bulb (UL/CSA Approved), 25 Amp, 250V Electric Rating

Features:
• Available either for temperature regulation or over-temperature protection
• Precise temperature control with fast reaction time
• 6,000 PSI
• Trip free manual reset

Specifications Sheet

Specifications:
• Temp Range: 70°- 250º F
• Max. Pressure: 6,000 PSI
• Electrical Rating AC: 25A - 250V (UL)
• Material: Bulb and Capillary in Copper
• Capillary Length: 71”
• Connections: Brass fastons
• Weight: 0.50 Lb

GP ZRMAX583 (Black) High Pressure Adjustable Rotating Nozzle 5,800 PSI.

Featuring:
• The ZRMAX is a high pressure, rotating, zero-degree nozzle
• The unique internal design allows aim-and-spray operation, even when cleaning overhead, and permits easy replacement of all wear parts
• Sized according to flow rate, a ZRMAX is perfect for your toughest cleaning tanks

Data & Nozzle Chart Sheet

Specifications:
• Max Pressure: 5,800 PSI
• Max Flow: 6.6 GPM
• Max Temperature: 176º FI
• Inlet Size: 1/4”-19 BSPP-F
• Dimensions; 1.5 O.D. x 4.1 Lg.
• Materials Brass, Plastic, Ceramic, Buna-N
• Size Color: Black
• Weight: 0.75 lb

GP ZRMAX581 (Red) High Pressure Adjustable Rotating Nozzle 5,800 PSI.

Featuring:
• The ZRMAX is a high pressure, rotating, zero-degree nozzle
• The unique internal design allows aim-and-spray operation, even when cleaning overhead, and permits easy replacement of all wear parts
• Sized according to flow rate, a ZRMAX is perfect for your toughest cleaning tanks

Data & Nozzle Chart Sheet

Specifications:
• Max Pressure: 5,800 PSI
• Max Flow: 6.6 GPM
• Max Temperature: 176º FI
• Inlet Size: 1/4”-19 BSPP-F
• Dimensions; 1.5 O.D. x 4.1 Lg.
• Materials Brass, Plastic, Ceramic, Buna-N
• Size Color: Red
• Weight: 0.75 lb