General Pump

General Pump DHRHC50100 3/8" x 100' Industrial Hose Reel On Stainless Steel Base with Carry Handle. Rated 5,000 PSI and up to 185° F. Industrial duty steel construction is ideal for pressure washer and sewer jetter use.

FEATURES
• Direct hand-crank rewind with locking pin
• Heavy duty forged brass swivel
• Extended swivel arm for mounting hose
• Durable powder coated finish (reel)
• Weather resistant stainless steel base
• Comfortable handle allows for easy movement

Specifications Sheet

SPECIFICATIONS
• 3/8" Hose Capacity: 100 ft
• 1/4" Hose Capacity: 150 ft
• Pressure Rating: 5,000 PSI
• Max Temp: 185° F.
• Inlet: 3/8" NPT-M (1/2"NPT-M adapter included)
• Outlet: 3/8" NPT-F
• Replaces 2100357
• Weight 26.60 lbs

GP TS12230 High Limit TS Series Thermal Switch 1/2" NPT 230º F with 68" Wire Lead

Features
• Simple installation
• 68” 18 AWG Cable
• Normally Closed
• Can be mounted in any position
• Factory calibrated
• Made in the USA
• Precision snap action internal switches

TS Series Snap Action Data Sheet

Specifications
• Maximum Pressure: 5,000 PSI
• Voltage: 5 AMPS at 120 VAC
• Cord Length: 68”
• Temperature: 230º F
• Inlet: 1/2” NPT
• Switch Dimensions: 2.5" x 1"
• Materials: Brass, Steel, Nylon, Epoxy
• Weight: 0.5 Lb

GP TS12150 High Limit TS Series Thermal Switch 1/2" NPT 150º F with 68" Wire Lead

Features
• Simple installation
• 68” 18 AWG Cable
• Normally Closed
• Can be mounted in any position
• Factory calibrated
• Made in the USA
• Precision snap action internal switches

TS Series Snap Action Data Sheet

Specifications
• Maximum Pressure: 5,000 PSI
• Voltage: 5 AMPS at 120 VAC
• Cord Length: 68”
• Temperature: 150º F
• Inlet: 1/2” NPT
• Switch Dimensions: 2.5" x 1"
• Materials: Brass, Steel, Nylon, Epoxy
• Weight: 0.5 Lb

General Pump DHRGH150 5/8" x 150' Heavy Duty Garden Hose Reel with Pedestal Stand

FEATURES
• HD pedestal stand - mount on wall, workbench or pressure washer
• Durable gray high-gloss powder coated finish
• One-piece welded drum
• Robust high flow brass swivel
• Can be set up for left- or right-hand orientation
• Can be mounted parallel or perpendicular to a wall
• Includes 6', 5/8" connection hose, brass fittings, and mounting hardware

Specifications Sheet

SPECIFICATIONS
• Capacity: 150’ of 5/8” garden hose
• Max. PSI: 150
• Color: Gray
• Inlet: 3/4" GH-F
• Outlet: 3/4" GH-M
• Materials: Aluminum, Steel, Brass, Rubber
• Carton Dimensions: 20.0” x 17.5” x 15.5”
• Weight 22.0 lbs

General Pump DGE4012NT Hot/Cold Water Open Spray Gun (No Trigger) 4,000 PSI 12 GPM

Features:
• Always open / no trigger
• Additional venting for excellent high temperature performance
• Large comfortable hand grip to accommodate work gloves

Specifications:
• Max Volume: 12 GPM
• Max Pressure: 4,000 PSI
• Max Temp: 320° F.
• Inlet: 3/8" NPT-F
• Outlet: 1/4" NPT-F
• Note: Open, No Trigger
• Weight: 1.0 lbs

General Pump YG36LA37SW Washdown Gun/Lance Assembly 8 GPM 3,650 PSI

Features:
• Minimizes fatigue for the operator
• Features inlet swivel
• 37 inch lance
• Shockproof resistant housing
• Stainless Steel seat and ball
• Internal construction of brass and Stainless Steel

Specifications:
• Maximum Volume: 8.0 GPM
• Maximum Discharge Pressure: 3,650 PSI
• Maximum Fluid Temperature: 195° F
• Inlet Port Thread: G 3/8” - F
• Ceramic Nozzle: #12 (2 mm)
• Materials: Stainless Steel, Brass, Plastic, Buna-N, Teflon
• Weight: 6.0 lbs

General Pump DCG5010SO Compensating Low Fatigue Rear Inlet Trigger Gun (Safety Orange) 5,000 PSI 10.5 GPM

Features:
• Exclusive patent-pending GP design
• Unique design compensates for changes in pressure
• Trigger designed for low fatigue
• Allows for continued use without tiring hand
• All flow passages designed for minimum pressure drop - maximum flow
• Fluorocarbon seals for maximum high temperature performance
• Large comfortable hand grip to accommodate work gloves
• Additional venting for excellent high temperature performance
• Durable glass-filled housing and ABS trigger
• High visibility safety orange

Specifications:
• Max Volume: 10.5 GPM
• Max Pressure: 5,000 PSI
• Max Temp: 320° F.
• Inlet: 3/8" NPT-F
• Outlet: 1/4" NPT-F
• Materials: Brass, Stainless Steel, Plastic, Viton
• Weight: 1.5 lbs

3,045 PSI 3.4 GPM General EP1508G8 Direct Drive Pump Made Ready W/ PULSAR4KHPEZ EZ Start Unloader. Pump is ready to use right out of the box

PUMP:
• General EP1508G8 Pump with SAE J609 Gas Flange
• Direct Drive with Gas Flange 9.0-13.0 HP SAE
• Max. Volume: 3.4 GPM
• Max. Discharge Pressure: 3,045 PSI
• Max. Pump Speed: 3,400 RPM
• Shaft Diameter: 1” Hollow
• Max. Horsepower Requirements: 10.6 GHP
• Max. Fluid Temp.: 165º F
• New Forged brass manifold , increases working pressure to 4,000 PSI
• Solid ceramic plungers with dual guide system

COMPONENTS:
• General EP1508G8 Triplex Plunger Pump
• PULSAR4KHPEZ EZ Start Unloader 4,050 PSI, 10 GPM
• Thermal relief valve
• 3/8” Hose Barb and Clamp Keeps Hose Secure and Sealed
• 3/4” Garden Hose Inlet Fitting with 1/4” Side Port
• 3/8” QC brass socket Installed and 3/8” QC Plug Included
• Mounting bolts
• Note: Pumps are not tested prior to shipping and unloader will need to be adjusted
• Weight: 19.90 lb

General Pump 2560001 Multi-Nozzle Holder (Accepts 1/4" MPT Nozzles)

Features
• This handy tool allows you to very quickly switch between four different nozzles on one spray gun wand.
• It accepts any 1/4" NPT-M thread spray nozzles and turns each one into a quick-connect tip.
• Works great for changing between foam and water, reaching multiple height levels, or altering the intensity of the spray without having to carry around several individual nozzles!
• Note: Nozzles not included.

Specifications

Specifications
• Dimensions: 0.70” H x 3.30” L
• Replaces JROD #6540
• Weight: 0.25 lb

General Pump D10089 3/8” Quick Disconnect Plug x M22-14MM M Twist Plug 4,000 PSI

Features:
• Adapts from quick connect to 22mm twist connect
• Zinc plated steel

Specifications:
• 3/8" QD Plug
• Male M22, Yoke/Stem: 14MM
• Max Temp: 175°
• Max Operating Pressure: 4,000 PSI
• Weight: 0.12 lb

General Pump D10037 3/8” Quick Disconnect Plug x M22-14MM F Twist Coupler 4,000 PSI

Features:
• Adapts from quick connect to 22mm twist connect
• Brass & zinc plated steel
• EPDM O-Ring

Specifications:
• 3/8" QD Plug
• Female M22, Yoke/Stem: 14MM
• Max Temp: 175°
• Max Operating Pressure: 4,000 PSI
• Replaces 6322
• Weight: 0.24 lb

General Pump PMRPULSAR4KHPEZ- Unloader and Kit 4,050 PSI 10.5 GPM

Features
• PULSAR4KHPEZ Unloader, 4050 PSI, 10 GPM
• 3/8" Quick Coupler and 3/8" Plug Included
• 3/4" Garden Hose Inlet Fitting with 1/4" Side Port
• 3/8" Hose Barb and Clamp Keeps Hose Secure and Sealed
• Flow through design
• General Pump recommends installing a secondary relief and pressure gauge

Specifications
• Maximum Temperature: 195° F
• Max GPM: 10.5
• Maximum PSI: 4,050
• Inlet: (2) 3/8" NPT-F
• Outlet: 3/8" NPT-F
• Bypass (2) 3/8" NPT-F
• Weight: 3.15 Lbs

General Pump 100439 Capillary Style 86° - 302° Adjustable Thermostat. Probe Style Thermostat Insulated SS Capillary Copper Immersion Bulb (UL/CSA approved), 16(4)A-380V Electric Rating

Features:
• Panel mounted, dual scale knob.
• Rapid response, ± 5° F
• 60 Inch capillary tube with bulb rated to 4,000 PSI
• UL/CSA approved

Specifications Sheet

Specifications:
• Temp Range: 86°- 302º F
• Max. Pressure: 4,000 PSI
• Electrical Rating AC: 120VAC-20A, 240VAC-20A, 120/240VAC-1/4HP
• Sensing Element: Copper Bulb
• UL/CSA Approved: Yes
• Weight: 0.40 Lb

General Pump 100438 Capillary Style 86° - 195° Adjustable Thermostat. Probe Style Thermostat Insulated SS Capillary Copper Immersion Bulb (UL/CSA approved), 16(4)A-380V Electric Rating

Features:
• Panel mounted, dual scale knob.
• Rapid response, ± 5° F
• 60 Inch capillary tube with bulb rated to 4,000 PSI
• UL/CSA approved

Specifications Sheet

Specifications:
• Temp Range: 86°- 195º F
• Max. Pressure: 4,000 PSI
• Electrical Rating AC: 120VAC-20A, 240VAC-20A, 120/240VAC-1/4HP
• Sensing Element: Copper Bulb
• UL/CSA Approved: Yes
• Weight: 0.40 Lb

General Pump 100538 Capillary Style 86° - 250° Adjustable Thermostat. Probe Style Thermostat Insulated SS Capillary Copper Immersion Bulb (UL/CSA approved), 16(4)A-380V Electric Rating

Features:
• Panel mounted, dual scale knob.
• Rapid response, ± 5° F
• 60 Inch capillary tube with bulb rated to 4,000 PSI
• UL/CSA approved

Specifications Sheet

Specifications:
• Temp Range: 86°- 250º F
• Max. Pressure: 4,000 PSI
• Electrical Rating AC: 120VAC-20A, 240VAC-20A, 120/240VAC-1/4HP
• Sensing Element: Copper Bulb
• UL/CSA Approved: Yes
• Weight: 0.40 Lb

General Pump DCG5010 Compensating Low Fatigue Rear Inlet Trigger Gun 5,000 PSI 10.5 GPM

Features:
• Exclusive patent-pending GP design
• Unique design compensates for changes in pressure
• Trigger designed for low fatigue
• Allows for continued use without tiring hand
• All flow passages designed for minimum pressure drop - maximum flow
• Fluorocarbon seals for maximum high temperature performance
• Large comfortable hand grip to accommodate work gloves
• Additional venting for excellent high temperature performance
• Durable glass-filled housing and trigger in Zytel (high tech nylon)

Specifications:
• Max Volume: 10.5 GPM
• Max Pressure: 5,000 PSI
• Max Temp: 320° F.
• Inlet: 3/8" NPT-F
• Outlet: 1/4" NPT-F
• Materials: Brass, Stainless Steel, Plastic, Viton
• Weight: 1.5 lbs

General Pump YDL41SSB / PA LD 9 41” Stainless Steel Molded Grip Dual Lance 4,050 PSI

Features:
• Double lance, with two tubes. First one for high pressure fluid and second one, deviced with handle, for low pressure detergent
• Provide a convenient method of operating a downstream chemical injection system by turning the insulated adjustment handle
• Designed for hot or cold water systems
• Made in Italy

Specifications:
• Length: 41"
• Inlet: 1/4" NPT-M
• Outlet Nozzle Fittings (2): 1/4" NPT-F
• Rated Pressure: 3,650 PSI
• Max. Pressure: 4,050 PSI
• Max. Volume: 10.5 GPM
• Max. Temp.: 320° F
• Materials: Stainless Steel, Brass, Plastic, Buna-N
• Note: Nozzles not included
• Weight: 2.25 lbs

2,610 PSI 2.9 GPM General PMRET1506G6 Direct Drive Pump Made Ready W/ PULSAR4KHPEZ EZ Start Unloader. Pump is ready to use right out of the box

PUMP:
• General ET1506G6 Pump with SAE J609A Gas Flange
• Direct Drive with Gas Flange 5.0-7.0 HP SAE
• Max. Volume: 2.9 GPM
• Max. Discharge Pressure: 2,610 PSI
• Max. Pump Speed: 3,400 RPM
• Shaft Diameter: 3/4” Hollow
• Max. Horsepower Requirements: 6.9 GHP
• Max. Fluid Temp.: 165º F
• New “HR” anti-corrosion surface treatment on manifold
• Solid ceramic plungers

COMPONENTS:
• General ET1506G6 Triplex Plunger Pump
• PULSAR4KHPEZ EZ Start Unloader 4,050 PSI, 10 GPM
• Thermal relief valve
• 3/8” Hose Barb and Clamp Keeps Hose Secure and Sealed
• 3/4” Garden Hose Inlet Fitting with 1/4” Side Port
• 3/8” QC brass socket and 3/8” QC Plug Included
• Mounting bolts
• Note: Pumps are not tested prior to shipping and unloader will need to be adjusted
• Weight: 14.90 lb

General Pump DHRWM50200 3/8" x 200' Professional Hose Reel. Rated 4,000 PSI and up to 185° F. Heavy duty steel frame structure is ideal for pressure washer and sewer jetter use.

FEATURES
• Direct hand crank with locking pin
• Full flow swivel
• Solid steel construction
• Durable black powder coated finish
• 5,000 PSI rated swivel
• Reduces garage and workshop clutter
• Extends hose life!
• Wall mounting kit available (2100531)

SPECIFICATIONS
• Capacity: 200’ of 3/8” pressure washer/sewer jetter hose
• Max. PSI: 4,000
• Max Temp: 185° F.
• Color: Black
• Inlet: 3/8 NPT-M
• Outlet: 3/8 NPT-F
• Carton Dimensions: 16.0” x 17.5” x 17.5”
• Weight 19.0 lbs

General Pump DHRTM50200 3/8" x 200' Trailer Mount Hose Reel. Rated 5,000 PSI and up to 250° F. Heavy duty steel frame and 360° swivel rotation is ideal for pressure washer and sewer jetter use.

FEATURES
• Direct hand-crank rewind with locking pin
• Solid steel construction
• Durable black powder coated finish
• 360° swivel rotation
• Robust folding handle
• 180° pivoting hose guide
• Adjustable friction lever brake
• Full flow high pressure stainless steel swivel

SPECIFICATIONS
• Capacity: 200’ of 3/8” pressure washer/sewer jetter hose
• Max. PSI: 5,000
• Max Temp: 250° F.
• Color: Black
• Inlet: 1/2 NPT-F (Includes reducer 1/2NPT-M x 3/8NPT-F )
• Outlet: 1/2 NPT-F (Includes reducer 1/2NPT-M x 3/8NPT-F )
• Carton Dimensions: 26.0” x 18.0” x 17.75”
• Note: Mounting bracket not included
• Weight 33.0 lbs

1/4” SJNR General Pump # 4.5 Rotating Sewer Jet Nozzle 5,000 PSI.

Features
• Side ports impact the sides of the pipe
• Polishes and maximizes line recovery
• Rear facing nozzles advance hose through pipe
• Heat-treated Stainless Steel nozzles are wear and corrosion resistant
• Great for pipe, sewer and drain cleaning
• Compact design allows for maneuverability and cornering within pipes
• High pressure nozzles are sized to match the flow and pressure specifications of the equipment
• Works best on 2" to 4" Pipes

Specifications
• Nozzle Size: # 4.5
• Material: Stainless steel & Brass
• Maximum Pressure: 5,000 PSI
• Inlet: 1/4” NPT-F
• Outside Diameter (O.D.): .67”
• Length: 1.34”
• Weight: 1.4 oz

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

3/8” SJNR General Pump # 4.0 Rotating Sewer Jet Nozzle 5,000 PSI.

Features
• Side ports impact the sides of the pipe
• Polishes and maximizes line recovery
• Rear facing nozzles advance hose through pipe
• Heat-treated Stainless Steel nozzles are wear and corrosion resistant
• Great for pipe, sewer and drain cleaning
• Compact design allows for maneuverability and cornering within pipes
• High pressure nozzles are sized to match the flow and pressure specifications of the equipment

Specifications
• Nozzle Size: # 4.0
• Material: Stainless steel & Brass
• Maximum Pressure: 5,000 PSI
• Inlet: 3/8” NPT-F
• Outside Diameter (O.D.): .87”
• Length: 1.42”
• Weight: 1.8 oz

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

General TS1711 Triplex Plunger Pump. The preferred pump frame in the pressure cleaning industry

Features:
• Forged brass manifold
• Large-capacity, die-cast, anodized aluminum oil-bath crankcase
• Over-sized connecting rods for maximum life
• Heavy-duty tapered roller bearing
• Solid ceramic plungers with continuously lubricated packings
• Unitized stainless steel inlet and discharge valves

WARNING: High Pressure Systems require a primary pressure regulating device (i.e. regulator, unloader) and a secondary pressure relief device (i.e. pop-off valve, relief valve). Failure to install such relief devices properly could result in personal injury or damage to pump or property. GP and PRI Industries do not assume any liability or responsibility for the operation of the user’s high pressure system.

Specifications:
• Triplex Plunger Pump
• Solid Shaft for Belt or Gear Drive
• Max. Volume: 3.5 GPM
• Max. Discharge Pressure: 2,700 PSI
• Max. Pump Speed: 1450 RPM
• Shaft Diameter: 24mm Solid
• Max. Horsepower Requirements: 8.4 GHP
• Max. Fluid Temp.: 165° F.
• Inlet Ports (2): 1/2-14 BSPP-F
• Discharge Ports (2): 3/8-19 BSPP-F
• Drive Side: Standard right
• Note: Item for sale is PUMP ONLY as shown in picture and does not include unloader which is required for proper operation
• Replaces TS1331
• Weight: 32.0 lb.

General ET1505E34 2,610 PSI 2.1 GPM Direct Drive Pump flanged to direct couple on electric NEMA 56 C motors

Features:
• “HR” anti-corrosion surface treatment on manifold
• New generation seal package
• Dust protection chamber
• Solid ceramic plungers
• Oversized plunger guide
• Optimized inlet and outlet valves
• Oversized crankcase Hollow shaft, flanged for direct couple to electric motors (NEMA56C)

Specifications:
• Max. Volume: 2.1 GPM
• Max. Discharge Pressure: 2,610 PSI
• Max. Horsepower Requirements: 3.7 EBHP
• Max. Pump Speed: 3,400 RPM
• Max. Fluid Temp.: 165º F
• Oil Capacity: 8.5 oz
• Inlet Port Thread: 1/2"-14 BSP-F
• Discharge Port Thread: 3/8"-19 BSP-F
• Shaft Diameter: 5/8” Hollow
• Dimensions – Nominal: 7.3" x 7.4" x 5.5"
• Weight: 11.0 lb

General 100817 High Draw Stainless Steel Adjustable Chemical Injector Acid Repair Kit

Each Kit Contains:
• (1) Spring #720049
• (2) O-ring, 70 Duro, Viton, .208x.070 #701501
• (1) Ball, Injector, Ceramic (Optional) #640065

Injector Specifications:
• Works with High Draw Adjustable Injectors 100861, 100811, 100862 & 100863
• Weight: lbs

General 100804 High Draw Chemical Injector Acid Repair Kit

Each Kit Contains:
• (1) Spring #720049
• (1) O-ring, 70 Duro, Viton, .208x.070 #701501
• (1) Ball, Injector, Ceramic (Optional) #640065

Injector Specifications:
• Works with High Draw Fixed Injectors 100773, 100774, 100775, 100776, 100873, 100874 & 100875
• Works with High Draw Adjustable Injectors 100810, 100811, 100812 & 100813
• Weight: lbs

General 100803 High Draw Chemical Injector Repair Kit

Each Kit Contains:
• (1) Spring #720049
• (1) O-ring, 70 Duro, Viton, .208x.070 #701501
• (1) Ball, Injector, 316 SS #520167

Injector Specifications:
• Works with High Draw Fixed Injectors 100773, 100774, 100775, 100776, 100873, 100874 & 100875
• Works with High Draw Adjustable Injectors 100810, 100811, 100812 & 100813
• Weight: lbs

Gereral Pump YVB135KDMI18 Direct Mount Unloader with 1.8 Chemical Injector. Fits General Series Pumps: TT & TP 51 Series Pumps

• Maximum Pressure: 2,600 PSI
• Max. Volume: 6.5 GPM
• Cemical Injector Size: 1.8mm
• Adjustable pressure
• Forged brass body & hardware
• Built-In bypass channel
• Max. Fluid Temp.: 195 degrees F.
• Inlet Port: 3/8” BSPP-F
• Outel Port: 3/8” BSPP-M
• Weight: 1.7 lbs

General Pump DF05080 Clear Bowl Inlet Filter / Strainer 1/2" NPT-F 80 Mesh

Features
• Keeps debris out of pump
• Clear plastic bowl makes it easy to see when cleaning is required
• 80 mesh, stainless steel mesh screen
• Easy to install
• Easy to disassemble and assemble for cleaning
• Made with durable long lasting materials

Specifications
• Bowl: Polycarbonate
• Body: Nylon
• Screen: Stainless steel
• O-Ring: EPDM
• Maximum Pressure at 125° F: 100 PSI
• Maximum Pressure at 70° F: 150 PSI
• Inlet: 1/2” NPT-F
• Outlet: 1/2” NPT-F
• Weight: 0.50 Lbs

General Pump DF07550 Clear Bowl Inlet Filter / Strainer 3/4" NPT-F 50 Mesh

Features
• Keeps debris out of pump
• Clear plastic bowl makes it easy to see when cleaning is required
• 50 mesh, stainless steel mesh screen
• Easy to install
• Easy to disassemble and assemble for cleaning
• Made with durable long lasting materials

Specifications
• Bowl: Polycarbonate
• Body: Nylon
• Screen: Stainless steel
• O-Ring: EPDM
• Maximum Pressure at 125° F: 100 PSI
• Maximum Pressure at 70° F: 150 PSI
• Inlet: 3/4” NPT-F
• Outlet: 3/4” NPT-F
• Weight: 0.50 Lbs

General Pump DF10050 Clear Bowl Inlet Filter / Strainer 1" NPT-F 50 Mesh

Features
• Keeps debris out of pump
• Clear plastic bowl makes it easy to see when cleaning is required
• 50 mesh, stainless steel mesh screen
• Easy to install
• Easy to disassemble and assemble for cleaning
• Made with durable long lasting materials

Specifications
• Bowl: Polycarbonate
• Body: Nylon
• Screen: Stainless steel
• O-Ring: EPDM
• Maximum Pressure at 125° F: 100 PSI
• Maximum Pressure at 70° F: 150 PSI
• Inlet: 1” NPT-F
• Outlet: 1” NPT-F
• Weight: 0.75 Lbs

General Pump DF10080 Clear Bowl Inlet Filter / Strainer 1" NPT-F 80 Mesh

Features
• Keeps debris out of pump
• Clear plastic bowl makes it easy to see when cleaning is required
• 80 mesh, stainless steel mesh screen
• Easy to install
• Easy to disassemble and assemble for cleaning
• Made with durable long lasting materials

Specifications
• Bowl: Polycarbonate
• Body: Nylon
• Screen: Stainless steel
• O-Ring: EPDM
• Maximum Pressure at 125° F: 100 PSI
• Maximum Pressure at 70° F: 150 PSI
• Inlet: 1” NPT-F
• Outlet: 1” NPT-F
• Weight: 0.75 Lbs

General Pump DF12550 Clear Bowl Inlet Filter / Strainer 1-1/4" NPT-F 50 Mesh

Features
• Keeps debris out of pump
• Clear plastic bowl makes it easy to see when cleaning is required
• 50 mesh, stainless steel mesh screen
• Easy to install
• Easy to disassemble and assemble for cleaning
• Made with durable long lasting materials

Specifications
• Bowl: Polycarbonate
• Body: Nylon
• Screen: Stainless steel
• O-Ring: EPDM
• Maximum Pressure at 125° F: 100 PSI
• Maximum Pressure at 70° F: 150 PSI
• Inlet: 1-1/4” NPT-F
• Outlet: 1-1/4” NPT-F
• Weight: 0.75 Lbs

General Pump DF15050 Clear Bowl Inlet Filter / Strainer 1-1/2" NPT-F 50 Mesh

Features
• Keeps debris out of pump
• Clear plastic bowl makes it easy to see when cleaning is required
• 50 mesh, stainless steel mesh screen
• Easy to install
• Easy to disassemble and assemble for cleaning
• Made with durable long lasting materials

Specifications
• Bowl: Polycarbonate
• Body: Nylon
• Screen: Stainless steel
• O-Ring: EPDM
• Maximum Pressure at 125° F: 100 PSI
• Maximum Pressure at 70° F: 150 PSI
• Inlet: 1-1/2” NPT-F
• Outlet: 1-1/2” NPT-F
• Weight: 1.0 Lbs

General Pump DF05050 Clear Bowl Inlet Filter / Strainer 1/2" NPT-F 50 Mesh

Features
• Keeps debris out of pump
• Clear plastic bowl makes it easy to see when cleaning is required
• 50 mesh, stainless steel mesh screen
• Easy to install
• Easy to disassemble and assemble for cleaning
• Made with durable long lasting materials

Specifications
• Bowl: Polycarbonate
• Body: Nylon
• Screen: Stainless steel
• O-Ring: EPDM
• Maximum Pressure at 125° F: 100 PSI
• Maximum Pressure at 70° F: 150 PSI
• Inlet: 1/2” NPT-F
• Outlet: 1/2” NPT-F
• Weight: 0.50 Lbs

General Pump DF07580 Clear Bowl Inlet Filter / Strainer 3/4" NPT-F 80 Mesh

Features
• Keeps debris out of pump
• Clear plastic bowl makes it easy to see when cleaning is required
• 80 mesh, stainless steel mesh screen
• Easy to install
• Easy to disassemble and assemble for cleaning
• Made with durable long lasting materials

Specifications
• Bowl: Polycarbonate
• Body: Nylon
• Screen: Stainless steel
• O-Ring: EPDM
• Maximum Pressure at 125° F: 100 PSI
• Maximum Pressure at 70° F: 150 PSI
• Inlet: 3/4” NPT-F
• Outlet: 3/4” NPT-F
• Weight: 0.50 Lbs

General EZ2555S 2500 PSI, 5.5 GPM Solid Shaft Pump for belt drive, flex coupling or gear reduction

Features:
• Solid ceramic plunger design
• Flex coupling and bell housing available for direct drive
• Forged brass manifold with 4:1 hydrostatic rating
• Die-cast, anodized aluminum, oil-bath crankcase
• Premium roller bearing
• Unitized stainless steel inlet and discharge valves
• Available in “L” left-handed versions

WARNING: High Pressure Systems require a primary pressure regulating device (i.e. regulator, unloader) and a secondary pressure relief device (i.e. pop-off valve, relief valve). Failure to install such relief devices properly could result in personal injury or damage to pump or property. GP and PRI Industries do not assume any liability or responsibility for the operation of the user’s high pressure system.

Specifications Sheet

Specifications:
• Triplex Plunger Pump
• Max. Volume: 5.5 GPM
• Max. Discharge Pressure: 2,500 PSI
• Max. Pump Speed: 3,400 RPM
• Shaft Diameter: 24MM Solid
• Max. Horsepower Requirements: 9.4 EBHP
• Max. Fluid Temp.: 165 degrees F.
• Inlet Ports (2): 1/2-14 BSPP-F
• Discharge Ports (2): 3/8-19 BSPP-F
• Drive Side: Standard right>
• Crankcase Oil Capacity: 14.0 oz
• Note: Item for sale is PUMP ONLY as shown in picture and does not include unloader which is required for proper operation
• Weight: 18.0 lb.

General Pump 100687 Clutch w/Mounting Plate 47, 66 and 59(ES) Series, 12V, Dual Groove. Mobile Clutch for 24mm Solid Shaft Pump

Features:
• Solid forged rotor. A one-piece solid forged rotor means no chance of internal parts separation. They have an even wall thickness around the coil which gives optimum flux distribution, maximizing torque.
• Different coil voltages available. 12 volt is the most common; 24 volt clutches are also available.
• High temperature, longer-life grease. Our special long-life grease has shown a significant improvement in life over other standard high temp greases.
• E-coating. Where possible, all parts in the clutch are e-coated to give maximum corrosion protection.
• High-temperature epoxy coil. To help prevent failure from vibration and outside contaminants, all coils are sealed in the coil shell with a high-temperature epoxy coating.
• Forged machined pulley. All GP models use a heavy-duty machined pulley. A stronger pulley resists damage

Data Sheet

Specifications:
• Pulley Size & Type: 7" - A Groove, 24mm Shaft
• Width: 2.25"
• Torque After Burnishing: 75 - 95 lbs.
• Power Requirement: 12V 47 Watts
• Weight: 8.0 lbs

General Pump 100688 Clutch w/Mounting Plate 44, 50, 63 and 58 (ES) Series, 12V, Dual Groove. Mobile Clutch for 24mm Solid Shaft Pump

Features:
• Solid forged rotor. A one-piece solid forged rotor means no chance of internal parts separation. They have an even wall thickness around the coil which gives optimum flux distribution, maximizing torque.
• Different coil voltages available. 12 volt is the most common; 24 volt clutches are also available.
• High temperature, longer-life grease. Our special long-life grease has shown a significant improvement in life over other standard high temp greases.
• E-coating. Where possible, all parts in the clutch are e-coated to give maximum corrosion protection.
• High-temperature epoxy coil. To help prevent failure from vibration and outside contaminants, all coils are sealed in the coil shell with a high-temperature epoxy coating.
• Forged machined pulley. All GP models use a heavy-duty machined pulley. A stronger pulley resists damage

Data Sheet

Specifications:
• Pulley Size & Type: 7" - A Groove, 24mm Shaft
• Width: 2.25"
• Torque After Burnishing: 75 - 95 lbs.
• Power Requirement: 12V 47 Watts
• Weight: 8.0 lbs

General Pump 100719 Clutch w/Mounting Plate 47, 66 and 59(ES) Series, 12V, Single Groove. Mobile Clutch for 24mm Solid Shaft Pump

Features:
• Solid forged rotor. A one-piece solid forged rotor means no chance of internal parts separation. They have an even wall thickness around the coil which gives optimum flux distribution, maximizing torque.
• Different coil voltages available. 12 volt is the most common; 24 volt clutches are also available.
• High temperature, longer-life grease. Our special long-life grease has shown a significant improvement in life over other standard high temp greases.
• E-coating. Where possible, all parts in the clutch are e-coated to give maximum corrosion protection.
• High-temperature epoxy coil. To help prevent failure from vibration and outside contaminants, all coils are sealed in the coil shell with a high-temperature epoxy coating.
• Forged machined pulley. All GP models use a heavy-duty machined pulley. A stronger pulley resists damage

Data Sheet

Specifications:
• Pulley Size & Type: 7" - A Groove, 24mm Shaft
• Width: 2.25"
• Torque After Burnishing: 75 - 95 lbs.
• Power Requirement: 12V 47 Watts
• Weight: 8.0 lbs

General Pump 100720 Clutch w/Mounting Plate 44, 50, 63 and 58 (ES) Series, 12V, Single Groove. Mobile Clutch for 24mm Solid Shaft Pump

Features:
• Solid forged rotor. A one-piece solid forged rotor means no chance of internal parts separation. They have an even wall thickness around the coil which gives optimum flux distribution, maximizing torque.
• Different coil voltages available. 12 volt is the most common; 24 volt clutches are also available.
• High temperature, longer-life grease. Our special long-life grease has shown a significant improvement in life over other standard high temp greases.
• E-coating. Where possible, all parts in the clutch are e-coated to give maximum corrosion protection.
• High-temperature epoxy coil. To help prevent failure from vibration and outside contaminants, all coils are sealed in the coil shell with a high-temperature epoxy coating.
• Forged machined pulley. All GP models use a heavy-duty machined pulley. A stronger pulley resists damage

Data Sheet

Specifications:
• Pulley Size & Type: 7" - A Groove, 24mm Shaft
• Width: 2.25"
• Torque After Burnishing: 75 - 95 lbs.
• Power Requirement: 12V 47 Watts
• Weight: 8.0 lbs

General Pump 100719 Clutch w/Mounting Plate 47, 66 and 59(ES) Series, 24V, Dual Groove. Mobile Clutch for 24mm Solid Shaft Pump

Features:
• Solid forged rotor. A one-piece solid forged rotor means no chance of internal parts separation. They have an even wall thickness around the coil which gives optimum flux distribution, maximizing torque.
• Different coil voltages available. 12 volt is the most common; 24 volt clutches are also available.
• High temperature, longer-life grease. Our special long-life grease has shown a significant improvement in life over other standard high temp greases.
• E-coating. Where possible, all parts in the clutch are e-coated to give maximum corrosion protection.
• High-temperature epoxy coil. To help prevent failure from vibration and outside contaminants, all coils are sealed in the coil shell with a high-temperature epoxy coating.
• Forged machined pulley. All GP models use a heavy-duty machined pulley. A stronger pulley resists damage

Data Sheet

Specifications:
• Pulley Size & Type: 7" - A Groove, 24mm Shaft
• Width: 2.25"
• Torque After Burnishing: 75 - 95 lbs.
• Power Requirement: 24V 45.6 Watts
• Weight: 8.0 lbs

General Pump 100720 Clutch w/Mounting Plate 44, 50, 63 and 58 (ES) Series, 24V, Dual Groove. Mobile Clutch for 24mm Solid Shaft Pump

Features:
• Solid forged rotor. A one-piece solid forged rotor means no chance of internal parts separation. They have an even wall thickness around the coil which gives optimum flux distribution, maximizing torque.
• Different coil voltages available. 12 volt is the most common; 24 volt clutches are also available.
• High temperature, longer-life grease. Our special long-life grease has shown a significant improvement in life over other standard high temp greases.
• E-coating. Where possible, all parts in the clutch are e-coated to give maximum corrosion protection.
• High-temperature epoxy coil. To help prevent failure from vibration and outside contaminants, all coils are sealed in the coil shell with a high-temperature epoxy coating.
• Forged machined pulley. All GP models use a heavy-duty machined pulley. A stronger pulley resists damage

Data Sheet

Specifications:
• Pulley Size & Type: 7" - A Groove, 24mm Shaft
• Width: 2.25"
• Torque After Burnishing: 75 - 95 lbs.
• Power Requirement: 24V 45.6 Watts
• Weight: 8.0 lbs

General Pump Full Slide Hammer

Data Sheet

Specificatons:
• Used for General Pump Clutch Assemblies 100687, 100688, 100717, 100718, 100719, 100720
• Use with 520297m clutch centering tool
• Weight: 11.0 lbs

• Triplex Plunger Pump
• Direct Drive with Electric Flange NEMA 184C
• Max. Volume: 5.5 GPM
• Max. Discharge Pressure: 2,500 PSI
• Max. Pump Speed: 1750 RPM
• Shaft Diameter: 1 1/8” Hollow
• Max. Horsepower Requirements: 9.4 EBHP
• Max. Fluid Temp.: 165º degrees F.
• Inlet Ports (2): 1/2" BSP
• Discharge Ports (2): 3/8" BSP
• Drive Side: Standard right
• Forged brass head & valve covers
• Solid ceramic plungers
• Weight: 18.5 lb.

General Pump Clutch Centering Tool

Data Sheet

Specificatons:
• Used for General Pump Clutch Assemblies 100687, 100688, 100717, 100718, 100719, 100720
• 1/2"-13 Threaded Hole
• Use with 100163 Slide-hammer or bolt.
• Weight: lbs

General Pump Hose For Hammerhead DCFS 18 Surface Cleaners DCFSCP18 & DCFSCP18GZ