General Pump

General EZ3040S 3000 PSI, 4.0 GPM Solid Shaft Pump for belt drive, flex coupling or gear reduction

Features:
• Solid ceramic plunger design
• Flex coupling and bell housing available for direct drive
• Forged brass manifold with 4:1 hydrostatic rating
• Die-cast, anodized aluminum, oil-bath crankcase
• Premium roller bearing
• Unitized stainless steel inlet and discharge valves
• Available in “L” left-handed versions

WARNING: High Pressure Systems require a primary pressure regulating device (i.e. regulator, unloader) and a secondary pressure relief device (i.e. pop-off valve, relief valve). Failure to install such relief devices properly could result in personal injury or damage to pump or property. GP and PRI Industries do not assume any liability or responsibility for the operation of the user’s high pressure system.

Specifications Sheet

Specifications:
• Triplex Plunger Pump
• Max. Volume: 4.0 GPM
• Max. Discharge Pressure: 3,000 PSI
• Max. Pump Speed: 3,400 RPM
• Shaft Diameter: 24MM Solid
• Max. Horsepower Requirements: 8.2 EBHP
• Max. Fluid Temp.: 165 degrees F.
• Inlet Ports (2): 1/2-14 BSPP-F
• Discharge Ports (2): 3/8-19 BSPP-F
• Drive Side: Standard right>
• Crankcase Oil Capacity: 14.0 oz
• Note: Item for sale is PUMP ONLY as shown in picture and does not include unloader which is required for proper operation
• Weight: 18.0 lb.

• Triplex Plunger Pump
• Solid Shaft for Belt or Gear Drive
• Max. Volume: 4.0 GPM
• Max. Discharge Pressure: 3,000 PSI
• Max. Pump Speed: 1750 RPM
• Shaft Diameter: 24mm Solid
• Max. Horsepower Requirements: 11.0 GHP
• Max. Fluid Temp.: 165 degrees F.
• Inlet Ports (2): 1/2" BSP
• Discharge Ports (2): 3/8" BSP
• Drive Side: Standard right
• Nickel plated brass head & valve covers
• Solid ceramic plungers
• Weight: 33.0 lb.

• Triplex Plunger Pump
• Direct Drive with Gas Flange 9.0-13.0 HP SAE
• Max. Volume: 3.5 GPM
• Max. Discharge Pressure: 3,000 PSI · Max. Pump Speed: 3400 RPM
• Shaft Diameter: 1” Hollow
• Max. Horsepower Requirements: 9.5 GHP
• Max. Fluid Temp.: 165 degrees F.
• Inlet Ports (2): 1/2" BSP
• Discharge Ports (2): 3/8" BSP
• Drive Side: Standard right
• Forged brass head
• Solid ceramic plungers
• Weight: 19.1 lb.

General TSF2221 66 Series High Flow Triplex Plunger Pump

Features:
• Oversized roller bearings
• Fully anodized crankcase
• Innovative new seal design extends seal life
• New plunger design improves thermal shock resistance
• New valve cap improves hydrostatic performance

Specifications Sheet

WARNING: High Pressure Systems require a primary pressure regulating device (i.e. regulator, unloader) and a secondary pressure relief device (i.e. pop-off valve, relief valve). Failure to install such relief devices properly could result in personal injury or damage to pump or property. GP and PRI Industries do not assume any liability or responsibility for the operation of the user’s high pressure system.

Specifications:
• Triplex Plunger Pump
• Solid Shaft for Belt or Gear Drive
• Max. Discharge Pressure: 3,000 PSI
• Max. Volume: 8.5 GPM @ 1,450 RPM
• Max. Volume: 10.2 GPM @ 1,750 RPM
• Shaft Diameter: 24mm Solid
• Max. Horsepower Requirements (EBHP): 17.5 @ 8.5 GPM/21.0 @ 10.2 GPM
• Maximum Inlet Pressure: 125 PSI
• Oil Capacity: 33.8oz.
• Max. Fluid Temp.: 165° F.
• Inlet Ports (2): 3/4"-14 BSP-F
• Discharge Ports (2): 3/8-19 BSP-F
• Drive Side: Standard right
• Dimensions: 14.94" x 9.78" x 6.99"
• Note: Item for sale is PUMP ONLY as shown in picture and does not include unloader which is required for proper operation
• Weight: 40.7 lb.

General EZ3042S 3000 PSI, 4.2 GPM Solid Shaft Pump for belt drive, flex coupling or gear reduction

Features:
• Solid ceramic plunger design
• Flex coupling and bell housing available for direct drive
• Forged brass manifold with 4:1 hydrostatic rating
• Die-cast, anodized aluminum, oil-bath crankcase
• Premium roller bearing
• Unitized stainless steel inlet and discharge valves
• Available in “L” left-handed versions

WARNING: High Pressure Systems require a primary pressure regulating device (i.e. regulator, unloader) and a secondary pressure relief device (i.e. pop-off valve, relief valve). Failure to install such relief devices properly could result in personal injury or damage to pump or property. GP and PRI Industries do not assume any liability or responsibility for the operation of the user’s high pressure system.

Specifications Sheet

Specifications:
• Triplex Plunger Pump
• Max. Volume: 4.2 GPM
• Max. Discharge Pressure: 3,000 PSI
• Max. Pump Speed: 1,750 RPM
• Shaft Diameter: 24MM Solid
• Max. Horsepower Requirements: 8.6 EBHP
• Max. Fluid Temp.: 165 degrees F.
• Inlet Ports (2): 1/2-14 BSPP-F
• Discharge Ports (2): 3/8-19 BSPP-F
• Drive Side: Standard right>
• Crankcase Oil Capacity: 14.0 oz
• Note: Item for sale is PUMP ONLY as shown in picture and does not include unloader which is required for proper operation
• Weight: 18.0 lb.

General Pump DHRA50450SS 3/8" x 450', 3/4" x 250' Stainless Steel "A" Frame Industrial Hose Reel. Rated 5,000 PSI and up to 250° F. Ideal for use with pressure washers, sewer jetters, lawn & tree sprayers, etc. Can be used as is or can be mounted to portable cart or stacked

FEATURES
• Direct hand-crank rewind with locking pin and folding mechanism
• Heavy duty stainless steel construction
• Full flow stainless steel swivel
• Variable friction brake
• Many available accessories
• Includes one D10032 Fitting 3/4” GH X 1/2 NPT-M

DHRA SS Spec Sheet

SPECIFICATIONS
• Capacity 3/8" Pressure Washer / Sewer Hose: 450’
• Capacity 5/8" Garden Hose: 325’
• Capacity 3/4" Garden Hose: 250’
• Max. PSI: 5,000
• Max Temp: 250° F.
• Inlet: 1/2 NPT-F (Bushing Included, 1/2 NPT-M x 3/8 NPT-F)
• Outlet: 1/2 NPT-F (Bushing Included, 1/2 NPT-M x 3/8 NPT-F)
• Note: Unit pictured is model DHRA50150SS
• Gross Weight 48.0 lbs

General Pump DHRA50450 3/8" x 450' or 1/2" x 375' or 5/8” x 300’ (garden hose). "A" Frame Industrial Hose Reel. Rated 5,000 PSI and up to 250° F. Ideal for use with pressure washers, sewer jetters, lawn & tree sprayers, etc. Can be used as is or can be mounted to portable cart or stacked

FEATURES
• Direct hand-crank rewind with pin lock
• Solid steel construction
• Durable gray high-gloss powder coated finish
• Full flow stainless steel swivel
• Friction brake
• Switchable swivel/handle
• HD steel welded frame
• HD sealed axle bearings
• Includes one D10032 Fitting 3/4” GH X 1/2 NPT-M

DHRA Spec Sheet

SPECIFICATIONS
• Capacity 3/8" Pressure Washer / Sewer Hose: 450’
• Capacity 5/8" Garden Hose: 325’
• Capacity 3/4" Garden Hose: 250’
• Max. PSI: 5,000
• Max Temp: 250° F.
• Color: Black
• Inlet: 1/2 NPT-F (Bushing Included, 1/2 NPT-M x 3/8 NPT-F)
• Outlet: 1/2 NPT-F (Bushing Included, 1/2 NPT-M x 3/8 NPT-F)
• Carton Dimensions: 26” x 20” x 18”
• Gross Weight 47.6 lbs

General Pump DHRA50300SS 3/8" x 300', 3/4" x 175' Stainless Steel "A" Frame Industrial Hose Reel. Rated 5,000 PSI and up to 250° F. Ideal for use with pressure washers, sewer jetters, lawn & tree sprayers, etc. Can be used as is or can be mounted to portable cart or stacked

FEATURES
• Direct hand-crank rewind with locking pin and folding mechanism
• Heavy duty stainless steel construction
• Full flow stainless steel swivel
• Variable friction brake
• Many available accessories
• Includes one D10032 Fitting 3/4” GH X 1/2 NPT-M

DHRA SS Spec Sheet

SPECIFICATIONS
• Capacity 3/8" Pressure Washer / Sewer Hose: 300’
• Capacity 5/8" Garden Hose: 225’
• Capacity 3/4" Garden Hose: 175’
• Max. PSI: 5,000
• Max Temp: 250° F.
• Inlet: 1/2 NPT-F (Bushing Included, 1/2 NPT-M x 3/8 NPT-F)
• Outlet: 1/2 NPT-F (Bushing Included, 1/2 NPT-M x 3/8 NPT-F)
• Note: Unit pictured is model DHRA50150SS
• Gross Weight 41.97 lbs

General Pump DHRA50300 3/8" x 300', 1/2" x 250' "A" Frame Industrial Hose Reel. Rated 5,000 PSI and up to 250° F. Ideal for use with pressure washers, sewer jetters, lawn & tree sprayers, etc. Can be used as is or can be mounted to portable cart or stacked

FEATURES
• Direct hand-crank rewind with pin lock
• Solid steel construction
• Durable gray high-gloss powder coated finish
• Full flow stainless steel swivel
• Friction brake
• Switchable swivel/handle
• HD steel welded frame
• HD sealed axle bearings

DHRA Spec Sheet

SPECIFICATIONS
• Capacity 3/8" Pressure Washer / Sewer Hose: 300’
• Capacity 5/8" Garden Hose: 225’
• Capacity 3/4" Garden Hose: 175’
• Max. PSI: 5,000
• Max Temp: 250° F.
• Color: Black
• Inlet: 1/2 NPT-F (Bushing Included, 1/2 NPT-M x 3/8 NPT-F)
• Outlet: 1/2 NPT-F (Bushing Included, 1/2 NPT-M x 3/8 NPT-F)
• Carton Dimensions: 21” x 20” x 18”
• Gross Weight 41.9 lbs

General Pump DHRTM50200 3/8" x 200' Trailer Mount Hose Reel. Rated 5,000 PSI and up to 250° F. Heavy duty steel frame and 360° swivel rotation is ideal for pressure washer and sewer jetter use.

FEATURES
• Direct hand-crank rewind with locking pin
• Solid steel construction
• Durable black powder coated finish
• 360° swivel rotation
• Robust folding handle
• 180° pivoting hose guide
• Adjustable friction lever brake
• Full flow high pressure stainless steel swivel

SPECIFICATIONS
• Capacity: 200’ of 3/8” pressure washer/sewer jetter hose
• Max. PSI: 5,000
• Max Temp: 250° F.
• Color: Black
• Inlet: 1/2 NPT-F (Includes reducer 1/2NPT-M x 3/8NPT-F )
• Outlet: 1/2 NPT-F (Includes reducer 1/2NPT-M x 3/8NPT-F )
• Carton Dimensions: 26.0” x 18.0” x 17.75”
• Note: Mounting bracket not included
• Weight 33.0 lbs

General Pump D30006 3/8" x 200' Steel Hose Reel with Mounting Base. Rated 4,000 PSI and up to 185° F. Heavy duty steel frame structure is ideal for pressure washer and sewer jetter use. Quickly and easily mounts to most vertical and horizontal surfaces

FEATURES
• Direct hand-crank rewind with pin lock
• Solid steel construction
• Durable black powder coated finish
• Brass swivel with Stainless Steel internal stem
• Hardware provided for mounting to cart handle or bumper

SPECIFICATIONS
• Capacity: 200’ of 3/8” pressure washer/sewer jetter hose
• Max. PSI: 4,000
• Max Temp: 185° F.
• Color: Black
• Inlet: 3/8 NPT-F
• Outlet: 3/8 NPT-F
• Diimensions: 19.3” L x 13.4” W x 16.3” H
• Weight 15.65 lbs

General Pump DHRWM50200 3/8" x 200' Professional Hose Reel. Rated 4,000 PSI and up to 185° F. Heavy duty steel frame structure is ideal for pressure washer and sewer jetter use.

FEATURES
• Direct hand crank with locking pin
• Full flow swivel
• Solid steel construction
• Durable black powder coated finish
• 5,000 PSI rated swivel
• Reduces garage and workshop clutter
• Extends hose life!
• Wall mounting kit available (2100531)

SPECIFICATIONS
• Capacity: 200’ of 3/8” pressure washer/sewer jetter hose
• Max. PSI: 4,000
• Max Temp: 185° F.
• Color: Black
• Inlet: 3/8 NPT-M
• Outlet: 3/8 NPT-F
• Carton Dimensions: 16.0” x 17.5” x 17.5”
• Weight 19.0 lbs

General Pump DHRA50150SS 3/8" x 150', 3/4" x 100' Stainless Steel "A" Frame Industrial Hose Reel. Rated 5,000 PSI and up to 250° F. Ideal for use with pressure washers, sewer jetters, lawn & tree sprayers, etc. Can be used as is or can be mounted to portable cart or stacked

FEATURES
• Direct hand-crank rewind with locking pin and folding mechanism
• Heavy duty stainless steel construction
• Full flow stainless steel swivel
• Variable friction brake
• Many available accessories
• Includes one D10032 Fitting 3/4” GH X 1/2 NPT-M

DHRA Spec Sheet

SPECIFICATIONS
• Capacity 3/8" Pressure Washer / Sewer Hose: 150’
• Capacity 5/8" Garden Hose: 125’
• Capacity 3/4" Garden Hose: 100’
• Max. PSI: 5,000
• Max Temp: 250° F.
• Inlet: 1/2 NPT-F (Bushing Included, 1/2 NPT-M x 3/8 NPT-F)
• Outlet: 1/2 NPT-F (Bushing Included, 1/2 NPT-M x 3/8 NPT-F)
• Note: Unit pictured is model DHRA50150SS
• Gross Weight 34.15 lbs

General Pump DHRA50150 3/8" x 150', 1/2" x 125' "A" Frame Industrial Hose Reel. Rated 5,000 PSI and up to 250° F. Ideal for use with pressure washers, sewer jetters, lawn & tree sprayers, etc. Can be used as is or can be mounted to portable cart or stacked

FEATURES
• Direct hand-crank rewind with pin lock
• Solid steel construction
• Durable gray high-gloss powder coated finish
• Full flow stainless steel swivel
• Friction brake
• Switchable swivel/handle
• HD steel welded frame
• HD sealed axle bearings

DHRA Spec Sheet

SPECIFICATIONS
• Capacity 3/8" Pressure Washer / Sewer Hose: 150’
• Capacity 5/8" Garden Hose: 125’
• Capacity 3/4" Garden Hose: 100’
• Max. PSI: 5,000
• Max Temp: 250° F.
• Color: Gray
• Inlet: 1/2 NPT-F (Bushing Included, 1/2 NPT-M x 3/8 NPT-F)
• Outlet: 1/2 NPT-F (Bushing Included, 1/2 NPT-M x 3/8 NPT-F)
• Carton Dimensions: 16” x 20” x 18”
• Note: Unit pictured is model DHRA50300
• Gross Weight 36.4 lbs

General Pump DHRP50150 3/8" x 150' Industrial Hose Reel with Pedestal Mounting. Rated 5,000 PSI and up to 300° F. Heavy duty steel frame structure is ideal for pressure washer and sewer jetter use

FEATURES
• Direct hand-crank rewind
• Includes drum locking pin
• Solid steel construction
• Durable gray high-gloss powder coated finish
• 5,000 PSI rated swivel with nickel plated hose mounting arm
• HD pedestal stand - mount on wall, workbench or pressure washer
• One-piece welded drum

SPECIFICATIONS
• Capacity: 150’ of 3/8” pressure washer/sewer jetter hose
• Max. PSI: 5,000
• Max Temp: 300° F.
• Color: Gray
• Inlet: 3/8 NPT-M
• Outlet: 3/8 NPT-F
• Carton Dimensions: 20” x 18” x 15”
• Weight 27 lbs

General Pump DHR50150 3/8" x 150' Industrial Hose Reel with Mounting Base. Rated 5,000 PSI and up to 185° F. Heavy duty steel frame structure is ideal for pressure washer and sewer jetter use. Quickly and easily mounts to most vertical and horizontal surfaces

FEATURES
• Direct hand-crank rewind
• Includes drum locking pin
• Solid steel construction
• Durable black powder coated finish
• 5,000 PSI rated swivel with forged brass hose mounting arm
• Hardware provided for mounting to cart handle or bumper

Specifications Sheet

SPECIFICATIONS
• Capacity: 150’ of 3/8” pressure washer/sewer jetter hose
• Max. PSI: 5,000
• Max Temp: 185° F.
• Color: Black
• Inlet: 3/8 NPT-M
• Outlet: 3/8 NPT-F
• Carton Dimensions: 15.75” x 18.5” x 16.5”
• Replaces DHR50150D
• Weight 21.05 lbs

General Pump D30002 3/8" x 100' Steel Hose Reel with Mounting Base. Rated 4,000 PSI and up to 185° F. Heavy duty steel frame structure is ideal for pressure washer and sewer jetter use. Quickly and easily mounts to most vertical and horizontal surfaces

FEATURES
• Direct hand-crank rewind with pin lock
• Solid steel construction
• Durable black powder coated finish
• Brass swivel with Stainless Steel internal stem
• Hardware provided for mounting to cart handle or bumper

SPECIFICATIONS
• Capacity: 100’ of 3/8” pressure washer/sewer jetter hose
• Max. PSI: 4,000
• Max Temp: 185° F.
• Color: Black
• Inlet: 3/8 NPT-F
• Outlet: 3/8 NPT-F
• Dimensions: 14.4” L x 10.5” W x 12.8” H
• Weight 11.75 lbs

General Pump DHR50100 3/8" x 100' Industrial Hose Reel with Mounting Base. Rated 5,000 PSI and up to 300° F. Heavy duty steel frame structure is ideal for pressure washer and sewer jetter use. Quickly and easily mounts to most vertical and horizontal surfaces

FEATURES
• Direct hand-crank rewind
• Includes drum locking pin
• Solid steel construction
• Durable black powder coated finish
• 5,000 PSI rated swivel with forged brass hose mounting arm
• Hardware provided for mounting to cart handle or bumper

Specifications Sheet

SPECIFICATIONS
• Capacity: 100’ of 3/8” pressure washer/sewer jetter hose
• Max. PSI: 5,000
• Max Temp: 300° F.
• Color: Black
• Inlet: 3/8 NPT-M
• Outlet: 3/8 NPT-F
• Carton Dimensions: 14.5” x 18” x 15.6”
• Replaces DHR50100D
• Weight 18.85 lbs

General Pump DHRHC50100 3/8" x 100' Industrial Hose Reel On Stainless Steel Base with Carry Handle. Rated 5,000 PSI and up to 185° F. Industrial duty steel construction is ideal for pressure washer and sewer jetter use.

FEATURES
• Direct hand-crank rewind with locking pin
• Heavy duty forged brass swivel
• Extended swivel arm for mounting hose
• Durable powder coated finish (reel)
• Weather resistant stainless steel base
• Comfortable handle allows for easy movement

Specifications Sheet

SPECIFICATIONS
• 3/8" Hose Capacity: 100 ft
• 1/4" Hose Capacity: 150 ft
• Pressure Rating: 5,000 PSI
• Max Temp: 185° F.
• Inlet: 3/8" NPT-M (1/2"NPT-M adapter included)
• Outlet: 3/8" NPT-F
• Replaces 2100357
• Weight 26.60 lbs

General Pump D10089 3/8” Quick Disconnect Plug x M22-14MM M Twist Plug 4,000 PSI

Features:
• Adapts from quick connect to 22mm twist connect
• Zinc plated steel

Specifications:
• 3/8" QD Plug
• Male M22, Yoke/Stem: 14MM
• Max Temp: 175°
• Max Operating Pressure: 4,000 PSI
• Weight: 0.12 lb