Suttner America

Suttner ST-6 Any Position Flow Switch. Mounts in any position and spring assisted brass magnet configuration

Features:
• Can be mounted horizontal or vertical
• Reed switch encased in protective vacuum sealed glass tube eliminating exposure to corrosive cleaning chemicals
• Mounts further downstream in pumping system than traditional vacuum switches, thereby minimizing potential leak points that can cause vacuum switches to close
• Easy reed switch replacement
• Most proven and reliable flow switches in the industry

Specifications:
• Max. Pressure: 5,070 PSI
• Min. Pressure: 75 PSI
• Max. Flow Rate: 8.0 GPM
• Min. Flow Rate: 1 GPM
• Contact: 1 A - 250 V
• Max: Fluid Temperature: 176° F
• Cable Length: 47.0”
• Inlet & Outlet: 3/8” MPT
• Housing: Brass
• Replaces 200006540
• Weight: 0.80 lbs

Suttner ST-60F Brass Injector, Up to 5.0 Orifice, 3/8" M x 3/8" F. The ST-60F is a downstream chemical injector that relies on a pressure drop that is created by using a larger orifice spray nozzle

Features
• Siphon rate approximately 10:1
• Stainless steel spring and ball
• Fixed flow rate for accuracy
• Forged brass housing

Specifications
• Orifice Size: Up to 5
• Injector Size: 1.6 mm
• Max Pressure: 3,600 PSI
• Max Temp: 140° F.
• Inlet: 3/8” Male NPT
• Outlet: 3/8” Female NPT
• Hose Barb: 1/4” ID hose
• Weight: 0.20 lb

Suttner ST-60F Brass Injector, Up to 6.5 Orifice, 3/8" M x 3/8" F. The ST-60F is a downstream chemical injector that relies on a pressure drop that is created by using a larger orifice spray nozzle

Features
• Siphon rate approximately 10:1
• Stainless steel spring and ball
• Fixed flow rate for accuracy
• Forged brass housing

Specifications
• Orifice Size: Up to 6.5
• Injector Size: 1.8 mm
• Max Pressure: 3,600 PSI
• Max Temp: 140° F.
• Inlet: 3/8” Male NPT
• Outlet: 3/8” Female NPT
• Hose Barb: 1/4” ID hose
• Weight: 0.20 lb

1/4” Suttner ST-49 “ Negotiator” Sewer Nozzle # 5.0, 1 Front, 3 Rear 7,252 PSI.

Features
• High Quality, German engineered components
• Due to its very compact design this is the ideal solution for tight elbows
• 3 Rear jets for maximum thrust and powerful cleaning impact
• Front jet to blast through roots and scale or de-icing
• Hardened stainless steel
• Works best on 2" to 4" Pipes

Specifications
• Nozzle Size: # 5.0
• Material: Stainless steel
• Maximum Pressure: 7,252 PSI
• Max Flow: 7.9 GPM
• Inlet: 1/4” Female
• Outside Diameter (O.D.): .86”
• Length: .92”
• Weight: .08 lb

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

Suttner Mounting Bracket for Spray Guns / Lances

Features
• Wall mount for Suttner high pressure guns with lance or twin lance
• Perfect for mounting Suttner’s ST-175 foam to rinse lance

Specifications
• Material: Stainless steel
• Dimensions (L x W x D): 2.25 x 8.81 x 2.31 inches
• Weight: 0.85 lbs

Suttner ST-5 Any Position Flow Switch. Mounts in any position with a free floating magnet configuration

Features:
• Can be mounted horizontal or vertical
• Mounts further downstream in pumping system than traditional vacuum switches, thereby minimizing potential leak points that can cause vacuum switches to close
• Easy brass reed switch replacement

Specifications:
• Max. Pressure: 5,070 PS
• Min. Pressure: 75 PSI
• Max. Flow Rate: 7.8 GPM
• Min. Flow Rate: 1 GPM
• Contact: 1 A - 250 V
• Max: Fluid Temperature: 180° F
• Cable Length: 47.0”
• Inlet & Outlet: 3/8” FNPT
• Housing: Brass
• Color: Grey
• Replaces 200005600
• Weight: 0.98 lbs

Features
• High Quality, German engineered components
• Stainless Steel
• Adjustable 270 degree (+/-135°)

See in action on YouTube

Specifications
• Max Pressure: 5,070 PSI
• Max Flow: 10 GPM
• Max Temp: 300° F.
• Inlet: 1/4" Female
• Outlet: 1/4" Female
• Note: 1/4” MPT Nozzle not included
• Weight: 0.30 lb

Features
• High Quality, German engineered components
• Stainless Steel
• Adjustable 270 degree (+/-135°)

See in action on YouTube

Specifications
• Max Pressure: 5,070 PSI
• Max Flow: 10 GPM
• Max Temp: 300° F.
• Inlet: 1/4" Female
• Outlet: 1/4" Male
• Note: Nozzle not included
• Weight: 0.32 lb

1/4” Suttner ST-49 “Negotiator” Sewer Nozzle # 6.0, 6 Rear 7,252 PSI.

Features
• High Quality, German engineered components
• Due to its very compact design this is the ideal solution for tight elbows
• 6 Rear jets for maximum thrust and best wall coverage
• Hardened stainless steel
• Works best on 2" to 4" Pipes

Specifications
• Nozzle Size: # 6.0
• Material: Stainless steel
• Maximum Pressure: 7,252 PSI
• Max Flow: 7.9 GPM
• Inlet: 1/4” Female
• Outside Diameter (O.D.): .86”
• Length: .92”
• Weight: .08 lb

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

Suttner ST-36 Sludge Pump Casting with Hose Barb. Turns a pressure washer into a high output pump. Great for flood cleanup, car wash pits, draining pools or chemical spills

Features
• Water flowing through the high pressure nozzle creates a powerful venturi suction that vacuums up slurry solutions
• Debris as large as 3/4” will pass through the casting and out the discharge hose
• Vacuums up liquid slurries at a ratio of about 1:11 Example: Using 4 GPM will produce an output of 44 GPM
• Hose barb 1 1/2"
• Casting Only: Does not include 0 degree 1/4” MPT nozzle, coupling and hose

Suttner ST-36 Sludge Pump In Action on YouTube

Specifications
• Flow Rate: 11:1
• Max Pressure: 4,000 PSI
• Max Temp: 104° F.
• Inlet: 3/8" FPT
• Nozzle Port: 1/4" FPT
• Weight: 0.80 lb

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

Suttner ST-2605F Relax-Action Foam Spray Gun 12 GPM and 5,000 PSI

Features
• Suttner exclusive relax-action trigger
• Easiest opening and holding trigger in it’s class
• Proper spray angle for optimal positioning of pressure points
• Orange trigger lock identifies foam spray gun
• Comfort design trigger system

Specifications
• Max Flow: 12.0 GPM
• Max Pressure: 5,000 PSI
• Max Temp: 100° F.
• Inlet: 3/8" FPT
• Outlet: 1/4" FPT
• Weight: 1.28 lb

Suttner 38” ST-54 Dual Lance 4,500 PSI With Brass Soap Nozzle. For use when high and low pressures are needed. For example, spraying cleaning agents with low pressure through an injector valve (chemical injector required) and then cleaning with high pressure

Features
• Made In Germany - High Quality, German engineered components
• High or low pressure operation is controlled by twisting the side handle
• The side handle helps manage the lance with ease for longer working periods
• Threads are rolled on providing consistent sealing and four times the strength than cut threads
• Lance is equipped with 65° x #30 low pressure brass soap nozzle

Specifications
• Max Pressure: 4,500 PSI
• Length: 38”
• Max Temp: 300° F.
• Lance Material: Plated steel
• Inlet: 1/4" Male NPT
• Outlets: 1/4" Female NPT x 1/4” Soap Nozzle
• Note: 1/4” MPT Nozzle not included
• Weight: 2.72 lb

Features:
• Can be mounted horizontal or vertical
• Micro-switch replaces reed switch for better reliability and water protection
• Easy to install
• Resistant against shock and vibration
• IP 65 rated-water and dust proof
• Can be wired normally open or normally closed

Specifications:
• Switch Point: 1.2 GPM
• Max. Pressure: 5,000 PS
• Max. Flow Rate: 12 GPM
• Max Voltage: 250 V
• Max Current: 10.1 Amps
• Max: Fluid Temperature: 176° F
• Cable Length: 47.0”
• Inlet & Outlet: 3/8” FNPT
• Weight: 0.80 lbs

Suttner Stainless Steel Turbo Nozzle Strainer 5,000 PSI 16 GPM 1/2" FNPT x 1/2" MNPT. Essential protection for turbo nozzle to prevent dirt or other damaging particles from entering turbo nozzle

Features
• High Quality, German engineered components
• Extends the life of your 1/2” turbo nozzle
• Threads into turbo nozzle inlet and lance outlet
• Stainless steel

Specifications
• Max Pressure: 5,000 PSI
• Max Flow: 16 GPM
• Max Temp: 300° F.
• Inlet: 1/2" Female NPT
• Outlet: 1/2" Male NPT
• Weight: 0.40 lb

Features
• High Quality, German engineered components
• High or low pressure operation is controlled by twisting the valve knob
• Threads are rolled on providing consistent sealing and four times the strength than cut threads
• Lance is equipped with 65° x #30 low pressure brass soap nozzle
• Nozzle protectors included

Specifications
• Max Pressure: 3,625 PSI
• Length: 38”
• Max Temp: 300° F.
• Lance Material: Plated steel
• Inlet: 1/4" Male NPT
• Outlets: 1/4" Female NPT x 1/4” Soap Nozzle
• Note: 1/4” MPT Nozzle not included
• Weight: 2.72 lb

Suttner Pivotable & Lockable ST-330 Stainless Steel Nozzle Holder 5,070 PSI 1/4” F x 1/4” F. Swivel it easily!

Features
• High Quality, German engineered components
• Pivotable and lockable
• Used for cleaning of places which are difficult to access such as container e.g. feeding troughs and gutters
• Effortless and variable shifting of the swivel direction
• Made out of stainless steel
• Capable of swiveling by up to 240°

Specifications
• Max Pressure: 5,070 PSI
• Inlet: 1/4" Female
• Outlet: 1/4" F NPT
• Material: Stainless steel
• Note: 1/4” MPT Nozzle not included
• Weight: 0.40 lb

Suttner ST-601C Inline Chemical Resistant Spray Gun 4,000 PSI with Ceramic Ball. Ideal for cleaning vertical and overhead surfaces. Perfect for washing tractors, trailers, siding, windows, eaves, etc.

Features
• High Quality, German engineered components
• Superior Chemical Resistant
• Horizontal flow-through design
• Heavy duty, impact-resistant trigger guard
• Forged brass housing for maximum strength
• Unitized valve allows for higher temps and longer life
• Ceramic ball in valve is highly resistant against nearly all soaps and acids

Specifications
• Max Pressure: 4,000 PSI
• Max Flow: 12.0 GPM
• Max Temp: 300° F.
• Inlet: 3/8" Female NPT
• Outlet: 1/4" Female NPT
• Weight: 1.16 lb