Suttner America

Features
• High Quality, German engineered components
• High or low pressure operation is controlled by twisting the side handle
• Side handle helps manage the lance with ease for longer working periods
• Threads are rolled on providing consistent sealing and four times the strength than cut threads
• Lance is equipped with 65° x #30 low pressure brass soap nozzle
• Nozzle protectors included

Specifications
• Max Pressure: 7,300 PSI
• Length: 38”
• Max Temp: 300° F.
• Lance Material: Stainless steel
• Inlet: 1/4" Male NPT
• Outlets: 1/4" Female NPT x 1/4” Soap Nozzle
• Note: 1/4” MPT Nozzle not included
• Weight: 2.62 lb

Suttner ST-275 Stainless Steel Unloader Valve 7,250 PSI 10.5 GPM 3/8”F x 1/2" F with Switch. Stainless steel design. Particularly durable

Features:
• Smooth switching behavior
• All media-contacting parts made of stainless steel
• Pressure reduction in hose and gun in bypass operation to below 40% of the working pressure
• The sealing system does not require any moving high-pressure soft seals and is characterized by a particularly long service life
• High pressure connections suitable for sealing with bonded seals
• Valve ball made of high-performance ceramic

Flyer

Specifications:
• Max Pressure: 7,250 PSI
• Flow Rate: 10.5 GPM
• Max Temperature: 194° F
• Maximum inrush current 10mA-5A(2A)
• VoItage: 12-24VDC 12-250VAC
• Protection CIass: IP65
• CabIe:1.2 meters 3xAWG20
• Inlet Port: 3/8" F
• Outlet Port: 1/2” F
• Bypass Port: 3/8” F
• Weight: 2.86 lbs

Features
• High Quality, German engineered components
• High or low pressure operation is controlled by twisting the side handle
• Side handle helps manage the lance with ease for longer working periods
• Threads are rolled on providing consistent sealing and four times the strength than cut threads
• Lance is equipped with 65° x #30 low pressure brass soap nozzle
• Nozzle protectors included

Specifications
• Max Pressure: 7,300 PSI
• Length: 51”
• Max Temp: 300° F.
• Lance Material: Stainless steel
• Inlet: 1/4" Male NPT
• Outlets: 1/4" Female NPT x 1/4” Soap Nozzle
• Note: 1/4” MPT Nozzle not included
• Weight: 3.46 lb

Suttner ST-167 Stainless Steel Chemical Bypass Injector, #5.5, 5000 Psi, 3/8" F x 3/8” F

Field of Application
• The injectors completely made out of stainless steel make it possible to open two cross section areas (50 mm2 each) in order to guarantee a smooth use without drop in pressure when washing/rinsing
• This ensures that the injector can be permanently kept in the high pressure line, also at the time when large water quantities are used e.g. in the agriculture or food industry
• The cleaning capacity when cleaning and rinsing is not affected at all.
• A lever makes it possible to change from the cleaning and rinsing mode into injector operation
• When using the cleaning mode, there are two bore holes guiding the high pressure water parallel to the injector (bypass mode)
• When using the injector the available water quantity is guided through the injection area

Features
• Integrated lever that allows you to go from disinfectant to foam to rinse
• Food grade quality and specifications
• Durable Stainless steel construction
• 10 Dosing nozzles included
• Use 0.35 ID hose

Specifications
• Nozzle/Orifice Size: 5.5
• Max Flow Rate:18 GPM
• Min Flow Rate: 1 GPM
• Max Pressure: 5,000 PSI
• Min Pressure: 1,000 PSI
• Max Temp: 212° F.( Optimum foam created 130°F or less)
• Inlet: 3/8” Female
• Outlet: 3/8” Female
• Hose Barbs: .35” ID hose
• See the ST-167 System Diagram (3rd Picture)
• Weight: 2.38 lb

Please use Nozzle Chart to determine proper nozzle size

Note: If between sizes, choose the larger nozzle size

Nozzle Chart

Suttner ST-167 Stainless Steel Chemical Bypass Injector, #3.0, 5000 Psi, 3/8" F x 3/8” F

Field of Application
• The injectors completely made out of stainless steel make it possible to open two cross section areas (50 mm2 each) in order to guarantee a smooth use without drop in pressure when washing/rinsing
• This ensures that the injector can be permanently kept in the high pressure line, also at the time when large water quantities are used e.g. in the agriculture or food industry
• The cleaning capacity when cleaning and rinsing is not affected at all.
• A lever makes it possible to change from the cleaning and rinsing mode into injector operation
• When using the cleaning mode, there are two bore holes guiding the high pressure water parallel to the injector (bypass mode)
• When using the injector the available water quantity is guided through the injection area

Features
• Integrated lever that allows you to go from disinfectant to foam to rinse
• Food grade quality and specifications
• Durable Stainless steel construction
• 10 Dosing nozzles included
• Use 0.35 ID hose

Specifications
• Nozzle/Orifice Size: 3.0
• Max Flow Rate:18 GPM
• Min Flow Rate: 1 GPM
• Max Pressure: 5,000 PSI
• Min Pressure: 1,000 PSI
• Max Temp: 212° F.( Optimum foam created 130°F or less)
• Inlet: 3/8” Female
• Outlet: 3/8” Female
• Hose Barbs: .35” ID hose
• See the ST-167 System Diagram (3rd Picture)
• Weight: 2.38 lb

Please use Nozzle Chart to determine proper nozzle size

Note: If between sizes, choose the larger nozzle size

Nozzle Chart

Suttner ST-167 Stainless Steel Chemical Bypass Injector, #6.0, 5000 Psi, 3/8" F x 3/8” F

Field of Application
• The injectors completely made out of stainless steel make it possible to open two cross section areas (50 mm2 each) in order to guarantee a smooth use without drop in pressure when washing/rinsing
• This ensures that the injector can be permanently kept in the high pressure line, also at the time when large water quantities are used e.g. in the agriculture or food industry
• The cleaning capacity when cleaning and rinsing is not affected at all.
• A lever makes it possible to change from the cleaning and rinsing mode into injector operation
• When using the cleaning mode, there are two bore holes guiding the high pressure water parallel to the injector (bypass mode)
• When using the injector the available water quantity is guided through the injection area

Features
• Integrated lever that allows you to go from disinfectant to foam to rinse
• Food grade quality and specifications
• Durable Stainless steel construction
• 10 Dosing nozzles included
• Use 0.35 ID hose

Specifications
• Nozzle/Orifice Size: 6.0
• Max Flow Rate:18 GPM
• Min Flow Rate: 1 GPM
• Max Pressure: 5,000 PSI
• Min Pressure: 1,000 PSI
• Max Temp: 212° F.( Optimum foam created 130°F or less)
• Inlet: 3/8” Female
• Outlet: 3/8” Female
• Hose Barbs: .35” ID hose
• See the ST-167 System Diagram (3rd Picture)
• Weight: 2.38 lb

Please use Nozzle Chart to determine proper nozzle size

Note: If between sizes, choose the larger nozzle size

Nozzle Chart

Suttner ST-167 Stainless Steel Chemical Bypass Injector, #8.0, 5000 Psi, 3/8" F x 3/8” F

Field of Application
• The injectors completely made out of stainless steel make it possible to open two cross section areas (50 mm2 each) in order to guarantee a smooth use without drop in pressure when washing/rinsing
• This ensures that the injector can be permanently kept in the high pressure line, also at the time when large water quantities are used e.g. in the agriculture or food industry
• The cleaning capacity when cleaning and rinsing is not affected at all.
• A lever makes it possible to change from the cleaning and rinsing mode into injector operation
• When using the cleaning mode, there are two bore holes guiding the high pressure water parallel to the injector (bypass mode)
• When using the injector the available water quantity is guided through the injection area

Features
• Integrated lever that allows you to go from disinfectant to foam to rinse
• Food grade quality and specifications
• Durable Stainless steel construction
• 10 Dosing nozzles included
• Use 0.35 ID hose

Specifications
• Nozzle/Orifice Size: 8.0
• Max Flow Rate:18 GPM
• Min Flow Rate: 1 GPM
• Max Pressure: 5,000 PSI
• Min Pressure: 1,000 PSI
• Max Temp: 212° F.( Optimum foam created 130°F or less)
• Inlet: 3/8” Female
• Outlet: 3/8” Female
• Hose Barbs: .35” ID hose
• See the ST-167 System Diagram (3rd Picture)
• Weight: 2.38 lb

Please use Nozzle Chart to determine proper nozzle size

Note: If between sizes, choose the larger nozzle size

Nozzle Chart

Suttner ST-167 Stainless Steel Chemical Bypass Injector, #10.0, 5000 Psi, 3/8" F x 3/8” F

Field of Application
• The injectors completely made out of stainless steel make it possible to open two cross section areas (50 mm2 each) in order to guarantee a smooth use without drop in pressure when washing/rinsing
• This ensures that the injector can be permanently kept in the high pressure line, also at the time when large water quantities are used e.g. in the agriculture or food industry
• The cleaning capacity when cleaning and rinsing is not affected at all.
• A lever makes it possible to change from the cleaning and rinsing mode into injector operation
• When using the cleaning mode, there are two bore holes guiding the high pressure water parallel to the injector (bypass mode)
• When using the injector the available water quantity is guided through the injection area

Features
• Integrated lever that allows you to go from disinfectant to foam to rinse
• Food grade quality and specifications
• Durable Stainless steel construction
• 10 Dosing nozzles included
• Use 0.35 ID hose

Specifications
• Nozzle/Orifice Size: 10.0
• Max Flow Rate:18 GPM
• Min Flow Rate: 1 GPM
• Max Pressure: 5,000 PSI
• Min Pressure: 1,000 PSI
• Max Temp: 212° F.( Optimum foam created 130°F or less)
• Inlet: 3/8” Female
• Outlet: 3/8” Female
• Hose Barbs: .35” ID hose
• See the ST-167 System Diagram (3rd Picture)
• Weight: 2.38 lb

Please use Nozzle Chart to determine proper nozzle size

Note: If between sizes, choose the larger nozzle size

Nozzle Chart

Suttner ST-167 Stainless Steel Chemical Bypass Injector, #12.0, 5000 Psi, 3/8" F x 3/8” F

Field of Application
• The injectors completely made out of stainless steel make it possible to open two cross section areas (50 mm2 each) in order to guarantee a smooth use without drop in pressure when washing/rinsing
• This ensures that the injector can be permanently kept in the high pressure line, also at the time when large water quantities are used e.g. in the agriculture or food industry
• The cleaning capacity when cleaning and rinsing is not affected at all.
• A lever makes it possible to change from the cleaning and rinsing mode into injector operation
• When using the cleaning mode, there are two bore holes guiding the high pressure water parallel to the injector (bypass mode)
• When using the injector the available water quantity is guided through the injection area

Features
• Integrated lever that allows you to go from disinfectant to foam to rinse
• Food grade quality and specifications
• Durable Stainless steel construction
• 10 Dosing nozzles included
• Use 0.35 ID hose

Specifications
• Nozzle/Orifice Size: 12.0
• Max Flow Rate:18 GPM
• Min Flow Rate: 1 GPM
• Max Pressure: 5,000 PSI
• Min Pressure: 1,000 PSI
• Max Temp: 212° F.( Optimum foam created 130°F or less)
• Inlet: 3/8” Female
• Outlet: 3/8” Female
• Hose Barbs: .35” ID hose
• See the ST-167 System Diagram (3rd Picture)
• Weight: 2.38 lb

Please use Nozzle Chart to determine proper nozzle size

Note: If between sizes, choose the larger nozzle size

Nozzle Chart

Suttner 2,170 PSI Foot Valve with ST-2320 Gun 21 GPM 1/2” FPT Swivel Inlet & 1/2” Outlet. Foot controlled valves allow both hands to be free to control the sewer hose. Pulling sewer hose back and forth flushes the pipes. ST-2320 Trigger gun has stainless steel/brass components which create a durable long lasting trigger gun

Features:
• Pedal and valve are in protective housing
• Inlet and outlet are positioned to help keep hose out of the way
• Heavy gauge steel construction for durability and stability
• Gun foot valve houses a ST-2320 spray gun used as a control valve
• High-quality design with EPDM seal and PEEK valve piston
• Can be used in other applications

Specifications:
• Inlet (Stainless Steel): 1/2” FPT Swivel
• Outlet (Stainless Steel): 1/2” FPT
• Maximum Pressure: 2,170 PSI
• Max. Flow Rate: 21 GPM
• Max. Temp.: 300º F.
• Weight: 15 lbs.

Suttner #4.5 ST-160.3A Air Assisted Stainless Steel Chemical Injector with 3 Pairs of Injectors & Nozzles. Injector for large water quantities and high dosages. Chemically resistant stainless steel 1.4305 / AISI 304 with compressed air connection and wall bracket

Features
• The stainless steel injector features three pairs of injector and nozzle in one housing which can be configured independently. This enables numerous metering and foam applications
• In order to produce large foam quantities in the low-pressure range, the injector is provided with an compressed air connection
• You can inject 3 of the same or three different cleaning agents at the same time
• Maximum draw rate per line is 7 – 8%
• Total injector draw rate will be 21% – 24%
• Each injector draw barb comes with a packet of dosing nozzles if you want to meter some of or all 3 draw lines

Specifications
• Nozzle/Orifice Size: 4.5
• Flow Rate: 1 - 24 GPM
• Pressure: 90 - 5,000 PSI
• Max Temp: 194° F.
• Inlet: 1/2” Female
• Outlet: 1/2” Female
• Air Connection: 1/4” Male
• Hose Barbs: .35” ID hose
• Note: Optimum foam created 130°F or less
• Weight: 3.55 lb

Please use Nozzle Chart to determine proper nozzle size

Note: If between sizes, choose the larger nozzle size

Nozzle Chart

Suttner #9.0 ST-160.3A Air Assisted Stainless Steel Chemical Injector with 3 Pairs of Injectors & Nozzles. Injector for large water quantities and high dosages. Chemically resistant stainless steel 1.4305 / AISI 304 with compressed air connection and wall bracket

Features
• The stainless steel injector features three pairs of injector and nozzle in one housing which can be configured independently. This enables numerous metering and foam applications
• In order to produce large foam quantities in the low-pressure range, the injector is provided with an compressed air connection
• You can inject 3 of the same or three different cleaning agents at the same time
• Maximum draw rate per line is 7 – 8%
• Total injector draw rate will be 21% – 24%
• Each injector draw barb comes with a packet of dosing nozzles if you want to meter some of or all 3 draw lines

Specifications
• Nozzle/Orifice Size: 9.0
• Flow Rate: 1 - 24 GPM
• Pressure: 90 - 5,000 PSI
• Max Temp: 194° F.
• Inlet: 1/2” Female
• Outlet: 1/2” Female
• Air Connection: 1/4” Male
• Hose Barbs: .35” ID hose
• Note: Optimum foam created 130°F or less
• Weight: 3.55 lb

Please use Nozzle Chart to determine proper nozzle size

Note: If between sizes, choose the larger nozzle size

Nozzle Chart

Suttner ST-559 Stainless Steel Turbo / Rotating #2.0 Nozzle. This Suttner rotating nozzle with Tungsten Carbide Nozzle & Seat is rated up to 8,700 PSI. The increased tearing action of the rotating spray is ideal for hard surface applications, such as concrete graffiti cleaning or caked mud on heavy equipment

Features
• Increases cleaning efficiency as much as 200%
• The 0° rotation creates a cleaning and tearing action
• Ideal for hard surfaces
• Tungsten Carbide nozzle and sealing seat
• Improved materials for longer life

Specifications
• Nozzle Size # 2.0
• Max PSI: 8,700
• Max Temp.: 190° F
• Inlet: 1/4" Female NPT
• NOTE: All rotating nozzles should be started pointing downward
• Weight: 1.32 lbs

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

Suttner ST-559 Stainless Steel Turbo / Rotating #3.0 Nozzle. This Suttner rotating nozzle with Tungsten Carbide Nozzle & Seat is rated up to 8,700 PSI. The increased tearing action of the rotating spray is ideal for hard surface applications, such as concrete graffiti cleaning or caked mud on heavy equipment

Features
• Increases cleaning efficiency as much as 200%
• The 0° rotation creates a cleaning and tearing action
• Ideal for hard surfaces
• Tungsten Carbide nozzle and sealing seat
• Improved materials for longer life

Specifications
• Nozzle Size # 3.0
• Max PSI: 8,700
• Max Temp.: 190° F
• Inlet: 1/4" Female NPT
• NOTE: All rotating nozzles should be started pointing downward
• Weight: 1.32 lbs

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

Suttner ST-559 Stainless Steel Turbo / Rotating #4.0 Nozzle. This Suttner rotating nozzle with Tungsten Carbide Nozzle & Seat is rated up to 8,700 PSI. The increased tearing action of the rotating spray is ideal for hard surface applications, such as concrete graffiti cleaning or caked mud on heavy equipment

Features
• Increases cleaning efficiency as much as 200%
• The 0° rotation creates a cleaning and tearing action
• Ideal for hard surfaces
• Tungsten Carbide nozzle and sealing seat
• Improved materials for longer life

Specifications
• Nozzle Size # 4.0
• Max PSI: 8,700
• Max Temp.: 190° F
• Inlet: 1/4" Female NPT
• NOTE: All rotating nozzles should be started pointing downward
• Weight: 1.32 lbs

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

Suttner ST-559 Stainless Steel Turbo / Rotating #5.0 Nozzle. This Suttner rotating nozzle with Tungsten Carbide Nozzle & Seat is rated up to 8,700 PSI. The increased tearing action of the rotating spray is ideal for hard surface applications, such as concrete graffiti cleaning or caked mud on heavy equipment

Features
• Increases cleaning efficiency as much as 200%
• The 0° rotation creates a cleaning and tearing action
• Ideal for hard surfaces
• Tungsten Carbide nozzle and sealing seat
• Improved materials for longer life

Specifications
• Nozzle Size # 5.0
• Max PSI: 8,700
• Max Temp.: 190° F
• Inlet: 1/4" Female NPT
• NOTE: All rotating nozzles should be started pointing downward
• Weight: 1.32 lbs

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

Suttner ST-559 Stainless Steel Turbo / Rotating #6.0 Nozzle. This Suttner rotating nozzle with Tungsten Carbide Nozzle & Seat is rated up to 8,700 PSI. The increased tearing action of the rotating spray is ideal for hard surface applications, such as concrete graffiti cleaning or caked mud on heavy equipment

Features
• Increases cleaning efficiency as much as 200%
• The 0° rotation creates a cleaning and tearing action
• Ideal for hard surfaces
• Tungsten Carbide nozzle and sealing seat
• Improved materials for longer life

Specifications
• Nozzle Size # 6.0
• Max PSI: 8,700
• Max Temp.: 190° F
• Inlet: 1/4" Female NPT
• NOTE: All rotating nozzles should be started pointing downward
• Weight: 1.32 lbs

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

Suttner #9 ST-176 Stainless Steel 27.5” Foam Blaster Lance 3,625 PSI with 1/4" F Inlet. Switch from foam to rinse by turning the valve that’s conveniently within hands reach

Features
• The ST-176 Foam Blaster lance is the ideal accessory for Suttner's foam injector line. The innovative change-over technology allows to direct the full flow into either one or the other outlet pipe just by turning the hand wheel at the inlet
• In one position of the hand wheel the flow is directed thru an ST-76 foam blaster head for foaming. After changing over the full flow is directed thru the other pipe
• Includes 3 Injector nozzles
• Wash or rinse nozzle sold separately

Specifications
• Flow Rate: 6.0 – 16.0 GPM
• Max Pressure: 3,625 PSI
• Overall Length: ”
• Max Temp: 212° F.
• Inlet: 1/4" Female NPT
• Outlet (Foam): #9 ST-76 Foam Blaster head
• Outlet (Rinse): 1/4" Male (Nozzle not included)
• Note: Suttner (ST-160, ST-160M or St-164 Chemical or Foam injector) and rinse/wash nozzle required and are not included
• Weight: 3.45 lb

Please use Nozzle Chart to determine proper spray nozzle size

Nozzle Chart

Use Spray Nozzle Size and Foam Nozzle Chart to determine correct Air Injector Nozzle to use

Foam Nozzle Chart

Suttner #15 ST-176 Stainless Steel 27.5” Foam Blaster Lance 3,625 PSI with 1/4" F Inlet. Switch from foam to rinse by turning the valve that’s conveniently within hands reach

Features
• The ST-176 Foam Blaster lance is the ideal accessory for Suttner's foam injector line. The innovative change-over technology allows to direct the full flow into either one or the other outlet pipe just by turning the hand wheel at the inlet
• In one position of the hand wheel the flow is directed thru an ST-76 foam blaster head for foaming. After changing over the full flow is directed thru the other pipe
• Includes 3 Injector nozzles
• Wash or rinse nozzle sold separately

Specifications
• Flow Rate: 6.0 – 16.0 GPM
• Max Pressure: 3,625 PSI
• Overall Length: ”
• Max Temp: 212° F.
• Inlet: 1/4" Female NPT
• Outlet (Foam): #15 ST-76 Foam Blaster head
• Outlet (Rinse): 1/4" Male (Nozzle not included)
• Note: Suttner (ST-160, ST-160M or St-164 Chemical or Foam injector) and rinse/wash nozzle required and are not included
• Weight: 3.45 lb

Please use Nozzle Chart to determine proper spray nozzle size

Nozzle Chart

Use Spray Nozzle Size and Foam Nozzle Chart to determine correct Air Injector Nozzle to use

Foam Nozzle Chart

Suttner #19.5 ST-176 Stainless Steel 27.5” Foam Blaster Lance 3,625 PSI with 1/4" F Inlet. Switch from foam to rinse by turning the valve that’s conveniently within hands reach

Features
• The ST-176 Foam Blaster lance is the ideal accessory for Suttner's foam injector line. The innovative change-over technology allows to direct the full flow into either one or the other outlet pipe just by turning the hand wheel at the inlet
• In one position of the hand wheel the flow is directed thru an ST-76 foam blaster head for foaming. After changing over the full flow is directed thru the other pipe
• Includes 3 Injector nozzles
• Wash or rinse nozzle sold separately

Specifications
• Flow Rate: 6.0 – 16.0 GPM
• Max Pressure: 3,625 PSI
• Overall Length: ”
• Max Temp: 212° F.
• Inlet: 1/4" Female NPT
• Outlet (Foam): #19.5 ST-76 Foam Blaster head
• Outlet (Rinse): 1/4" Male (Nozzle not included)
• Note: Suttner (ST-160, ST-160M or St-164 Chemical or Foam injector) and rinse/wash nozzle required and are not included
• Weight: 3.45 lb

Please use Nozzle Chart to determine proper spray nozzle size

Nozzle Chart

Use Spray Nozzle Size and Foam Nozzle Chart to determine correct Air Injector Nozzle to use

Foam Nozzle Chart