Suttner America

Suttner ST-559 Stainless Steel Turbo / Rotating #3.0 Nozzle. This Suttner rotating nozzle with Tungsten Carbide Nozzle & Seat is rated up to 8,700 PSI. The increased tearing action of the rotating spray is ideal for hard surface applications, such as concrete graffiti cleaning or caked mud on heavy equipment

Features
• Increases cleaning efficiency as much as 200%
• The 0° rotation creates a cleaning and tearing action
• Ideal for hard surfaces
• Tungsten Carbide nozzle and sealing seat
• Improved materials for longer life

Specifications
• Nozzle Size # 3.0
• Max PSI: 8,700
• Max Temp.: 190° F
• Inlet: 1/4" Female NPT
• NOTE: All rotating nozzles should be started pointing downward
• Weight: 1.32 lbs

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

Suttner ST-559 Stainless Steel Turbo / Rotating #4.0 Nozzle. This Suttner rotating nozzle with Tungsten Carbide Nozzle & Seat is rated up to 8,700 PSI. The increased tearing action of the rotating spray is ideal for hard surface applications, such as concrete graffiti cleaning or caked mud on heavy equipment

Features
• Increases cleaning efficiency as much as 200%
• The 0° rotation creates a cleaning and tearing action
• Ideal for hard surfaces
• Tungsten Carbide nozzle and sealing seat
• Improved materials for longer life

Specifications
• Nozzle Size # 4.0
• Max PSI: 8,700
• Max Temp.: 190° F
• Inlet: 1/4" Female NPT
• NOTE: All rotating nozzles should be started pointing downward
• Weight: 1.32 lbs

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

Suttner ST-559 Stainless Steel Turbo / Rotating #5.0 Nozzle. This Suttner rotating nozzle with Tungsten Carbide Nozzle & Seat is rated up to 8,700 PSI. The increased tearing action of the rotating spray is ideal for hard surface applications, such as concrete graffiti cleaning or caked mud on heavy equipment

Features
• Increases cleaning efficiency as much as 200%
• The 0° rotation creates a cleaning and tearing action
• Ideal for hard surfaces
• Tungsten Carbide nozzle and sealing seat
• Improved materials for longer life

Specifications
• Nozzle Size # 5.0
• Max PSI: 8,700
• Max Temp.: 190° F
• Inlet: 1/4" Female NPT
• NOTE: All rotating nozzles should be started pointing downward
• Weight: 1.32 lbs

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

Suttner ST-559 Stainless Steel Turbo / Rotating #6.0 Nozzle. This Suttner rotating nozzle with Tungsten Carbide Nozzle & Seat is rated up to 8,700 PSI. The increased tearing action of the rotating spray is ideal for hard surface applications, such as concrete graffiti cleaning or caked mud on heavy equipment

Features
• Increases cleaning efficiency as much as 200%
• The 0° rotation creates a cleaning and tearing action
• Ideal for hard surfaces
• Tungsten Carbide nozzle and sealing seat
• Improved materials for longer life

Specifications
• Nozzle Size # 6.0
• Max PSI: 8,700
• Max Temp.: 190° F
• Inlet: 1/4" Female NPT
• NOTE: All rotating nozzles should be started pointing downward
• Weight: 1.32 lbs

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

Suttner #9 ST-176 Stainless Steel 27.5” Foam Blaster Lance 3,625 PSI with 1/4" F Inlet. Switch from foam to rinse by turning the valve that’s conveniently within hands reach

Features
• The ST-176 Foam Blaster lance is the ideal accessory for Suttner's foam injector line. The innovative change-over technology allows to direct the full flow into either one or the other outlet pipe just by turning the hand wheel at the inlet
• In one position of the hand wheel the flow is directed thru an ST-76 foam blaster head for foaming. After changing over the full flow is directed thru the other pipe
• Includes 3 Injector nozzles
• Wash or rinse nozzle sold separately

Specifications
• Flow Rate: 6.0 – 16.0 GPM
• Max Pressure: 3,625 PSI
• Overall Length: ”
• Max Temp: 212° F.
• Inlet: 1/4" Female NPT
• Outlet (Foam): #9 ST-76 Foam Blaster head
• Outlet (Rinse): 1/4" Male (Nozzle not included)
• Note: Suttner (ST-160, ST-160M or St-164 Chemical or Foam injector) and rinse/wash nozzle required and are not included
• Weight: 3.45 lb

Please use Nozzle Chart to determine proper spray nozzle size

Nozzle Chart

Use Spray Nozzle Size and Foam Nozzle Chart to determine correct Air Injector Nozzle to use

Foam Nozzle Chart

Suttner #15 ST-176 Stainless Steel 27.5” Foam Blaster Lance 3,625 PSI with 1/4" F Inlet. Switch from foam to rinse by turning the valve that’s conveniently within hands reach

Features
• The ST-176 Foam Blaster lance is the ideal accessory for Suttner's foam injector line. The innovative change-over technology allows to direct the full flow into either one or the other outlet pipe just by turning the hand wheel at the inlet
• In one position of the hand wheel the flow is directed thru an ST-76 foam blaster head for foaming. After changing over the full flow is directed thru the other pipe
• Includes 3 Injector nozzles
• Wash or rinse nozzle sold separately

Specifications
• Flow Rate: 6.0 – 16.0 GPM
• Max Pressure: 3,625 PSI
• Overall Length: ”
• Max Temp: 212° F.
• Inlet: 1/4" Female NPT
• Outlet (Foam): #15 ST-76 Foam Blaster head
• Outlet (Rinse): 1/4" Male (Nozzle not included)
• Note: Suttner (ST-160, ST-160M or St-164 Chemical or Foam injector) and rinse/wash nozzle required and are not included
• Weight: 3.45 lb

Please use Nozzle Chart to determine proper spray nozzle size

Nozzle Chart

Use Spray Nozzle Size and Foam Nozzle Chart to determine correct Air Injector Nozzle to use

Foam Nozzle Chart

Suttner #19.5 ST-176 Stainless Steel 27.5” Foam Blaster Lance 3,625 PSI with 1/4" F Inlet. Switch from foam to rinse by turning the valve that’s conveniently within hands reach

Features
• The ST-176 Foam Blaster lance is the ideal accessory for Suttner's foam injector line. The innovative change-over technology allows to direct the full flow into either one or the other outlet pipe just by turning the hand wheel at the inlet
• In one position of the hand wheel the flow is directed thru an ST-76 foam blaster head for foaming. After changing over the full flow is directed thru the other pipe
• Includes 3 Injector nozzles
• Wash or rinse nozzle sold separately

Specifications
• Flow Rate: 6.0 – 16.0 GPM
• Max Pressure: 3,625 PSI
• Overall Length: ”
• Max Temp: 212° F.
• Inlet: 1/4" Female NPT
• Outlet (Foam): #19.5 ST-76 Foam Blaster head
• Outlet (Rinse): 1/4" Male (Nozzle not included)
• Note: Suttner (ST-160, ST-160M or St-164 Chemical or Foam injector) and rinse/wash nozzle required and are not included
• Weight: 3.45 lb

Please use Nozzle Chart to determine proper spray nozzle size

Nozzle Chart

Use Spray Nozzle Size and Foam Nozzle Chart to determine correct Air Injector Nozzle to use

Foam Nozzle Chart

Suttner #30 ST-176 Stainless Steel 27.5” Foam Blaster Lance 3,625 PSI with 1/4" F Inlet. Switch from foam to rinse by turning the valve that’s conveniently within hands reach

Features
• The ST-176 Foam Blaster lance is the ideal accessory for Suttner's foam injector line. The innovative change-over technology allows to direct the full flow into either one or the other outlet pipe just by turning the hand wheel at the inlet
• In one position of the hand wheel the flow is directed thru an ST-76 foam blaster head for foaming. After changing over the full flow is directed thru the other pipe
• Includes 3 Injector nozzles
• Wash or rinse nozzle sold separately

Specifications
• Flow Rate: 6.0 – 16.0 GPM
• Max Pressure: 3,625 PSI
• Overall Length: ”
• Max Temp: 212° F.
• Inlet: 1/4" Female NPT
• Outlet (Foam): #30 ST-76 Foam Blaster head
• Outlet (Rinse): 1/4" Male (Nozzle not included)
• Note: Suttner (ST-160, ST-160M or St-164 Chemical or Foam injector) and rinse/wash nozzle required and are not included
• Weight: 3.45 lb

Please use Nozzle Chart to determine proper spray nozzle size

Nozzle Chart

Use Spray Nozzle Size and Foam Nozzle Chart to determine correct Air Injector Nozzle to use

Foam Nozzle Chart

Suttner ST-555 Professional Sandblaster #3.0 Stainless Steel with Adjustable Sand Flow. Removes coatings from almost any surface. Ideal for cleaning of machines, technical facilities, facades and masonry. Thanks to its stainless steel body, the ST-555 features utmost pressure resistance up to a continuous operating pressure of 7,250 PSI. The three symmetrical high-pressure nozzles in the blasting head provide for a flow of the blasting agent without any deflections. This is how wear of the ceramic diffuser nozzle with TPE coating is reduced to a minimum and pulse energy of the blasting agent is used optimally

FEATURES:
• High Quality, German engineered components
• The Sandblaster ST-555 has stainless steel construction 
• The sandblaster is suitable for dust-free blasting of solids with a grain size ranging from 0.4 to 0.8 mm
• With suction quantity control at the double suction pipe
• Sand blasting nozzle made of high-performance ceramics
• Inclusive: 3 hardened stainless steel nozzles

Multiple mediums can be used:
• Glass beads for cleaning of copper and bronze as well as polishing of stainless steel
• Glass powder for cleaning of stainless steel and natural stone or for removal of graffiti from light surfaces
• Slag (fine) for cleaning of sandstone or brick as well as removal of graffiti from dark surfaces
• Slag (coarse) removal of rust from metals or of old coatings and paintings. cleaning and grinding of concrete surfaces
• Sodium carbonate (water-soluble) cleaning of sensitive surfaces such as aluminum, glass, plastics, stainless steel
• Mineral blasting agent (sand) removal of rust from metals or of old coatings and paintings. Cleaning and grinding of concrete surfaces. Varnish removal

ST-555 Sandblaster on YouTube

SPECIFICATIONS:
• Nozzle Size: # 3.0
• Min Flow Rate: 3.0 GPM
• Max Flow Rate: 7.5 GPM
• Max Pressure: 7,250 PSI
• Max Temp: 212° F
• Hose Length: 13'
• Inlet: Male M22, Yoke/Stem: 14MM
• Weight: 4.92 lbs

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

Suttner ST-555 Professional Sandblaster #4.0 Stainless Steel with Adjustable Sand Flow. Removes coatings from almost any surface. Ideal for cleaning of machines, technical facilities, facades and masonry. Thanks to its stainless steel body, the ST-555 features utmost pressure resistance up to a continuous operating pressure of 7,250 PSI. The three symmetrical high-pressure nozzles in the blasting head provide for a flow of the blasting agent without any deflections. This is how wear of the ceramic diffuser nozzle with TPE coating is reduced to a minimum and pulse energy of the blasting agent is used optimally

FEATURES:
• High Quality, German engineered components
• The Sandblaster ST-555 has stainless steel construction 
• The sandblaster is suitable for dust-free blasting of solids with a grain size ranging from 0.4 to 0.8 mm
• With suction quantity control at the double suction pipe
• Sand blasting nozzle made of high-performance ceramics
• Inclusive: 3 hardened stainless steel nozzles

Multiple mediums can be used:
• Glass beads for cleaning of copper and bronze as well as polishing of stainless steel
• Glass powder for cleaning of stainless steel and natural stone or for removal of graffiti from light surfaces
• Slag (fine) for cleaning of sandstone or brick as well as removal of graffiti from dark surfaces
• Slag (coarse) removal of rust from metals or of old coatings and paintings. cleaning and grinding of concrete surfaces
• Sodium carbonate (water-soluble) cleaning of sensitive surfaces such as aluminum, glass, plastics, stainless steel
• Mineral blasting agent (sand) removal of rust from metals or of old coatings and paintings. Cleaning and grinding of concrete surfaces. Varnish removal

ST-555 Sandblaster on YouTube

SPECIFICATIONS:
• Nozzle Size: # 4.0
• Min Flow Rate: 3.0 GPM
• Max Flow Rate: 7.5 GPM
• Max Pressure: 7,250 PSI
• Max Temp: 212° F
• Hose Length: 13'
• Inlet: Male M22, Yoke/Stem: 14MM
• Weight: 4.92 lbs

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

Suttner ST-555 Professional Sandblaster #5.5 Stainless Steel with Adjustable Sand Flow. Removes coatings from almost any surface. Ideal for cleaning of machines, technical facilities, facades and masonry. Thanks to its stainless steel body, the ST-555 features utmost pressure resistance up to a continuous operating pressure of 7,250 PSI. The three symmetrical high-pressure nozzles in the blasting head provide for a flow of the blasting agent without any deflections. This is how wear of the ceramic diffuser nozzle with TPE coating is reduced to a minimum and pulse energy of the blasting agent is used optimally

FEATURES:
• High Quality, German engineered components
• The Sandblaster ST-555 has stainless steel construction 
• The sandblaster is suitable for dust-free blasting of solids with a grain size ranging from 0.4 to 0.8 mm
• With suction quantity control at the double suction pipe
• Sand blasting nozzle made of high-performance ceramics
• Inclusive: 3 hardened stainless steel nozzles

Multiple mediums can be used:
• Glass beads for cleaning of copper and bronze as well as polishing of stainless steel
• Glass powder for cleaning of stainless steel and natural stone or for removal of graffiti from light surfaces
• Slag (fine) for cleaning of sandstone or brick as well as removal of graffiti from dark surfaces
• Slag (coarse) removal of rust from metals or of old coatings and paintings. cleaning and grinding of concrete surfaces
• Sodium carbonate (water-soluble) cleaning of sensitive surfaces such as aluminum, glass, plastics, stainless steel
• Mineral blasting agent (sand) removal of rust from metals or of old coatings and paintings. Cleaning and grinding of concrete surfaces. Varnish removal

ST-555 Sandblaster on YouTube

SPECIFICATIONS:
• Nozzle Size: # 5.5
• Min Flow Rate: 3.0 GPM
• Max Flow Rate: 7.5 GPM
• Max Pressure: 7,250 PSI
• Max Temp: 212° F
• Hose Length: 13'
• Inlet: Male M22, Yoke/Stem: 14MM
• Weight: 4.92 lbs

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

Suttner ST-555 Professional Sandblaster #6.5 Stainless Steel with Adjustable Sand Flow. Removes coatings from almost any surface. Ideal for cleaning of machines, technical facilities, facades and masonry. Thanks to its stainless steel body, the ST-555 features utmost pressure resistance up to a continuous operating pressure of 7,250 PSI. The three symmetrical high-pressure nozzles in the blasting head provide for a flow of the blasting agent without any deflections. This is how wear of the ceramic diffuser nozzle with TPE coating is reduced to a minimum and pulse energy of the blasting agent is used optimally

FEATURES:
• High Quality, German engineered components
• The Sandblaster ST-555 has stainless steel construction 
• The sandblaster is suitable for dust-free blasting of solids with a grain size ranging from 0.4 to 0.8 mm
• With suction quantity control at the double suction pipe
• Sand blasting nozzle made of high-performance ceramics
• Inclusive: 3 hardened stainless steel nozzles

Multiple mediums can be used:
• Glass beads for cleaning of copper and bronze as well as polishing of stainless steel
• Glass powder for cleaning of stainless steel and natural stone or for removal of graffiti from light surfaces
• Slag (fine) for cleaning of sandstone or brick as well as removal of graffiti from dark surfaces
• Slag (coarse) removal of rust from metals or of old coatings and paintings. cleaning and grinding of concrete surfaces
• Sodium carbonate (water-soluble) cleaning of sensitive surfaces such as aluminum, glass, plastics, stainless steel
• Mineral blasting agent (sand) removal of rust from metals or of old coatings and paintings. Cleaning and grinding of concrete surfaces. Varnish removal

ST-555 Sandblaster on YouTube

SPECIFICATIONS:
• Nozzle Size: # 6.5
• Min Flow Rate: 3.0 GPM
• Max Flow Rate: 7.5 GPM
• Max Pressure: 7,250 PSI
• Max Temp: 212° F
• Hose Length: 13'
• Inlet: Male M22, Yoke/Stem: 14MM
• Weight: 4.92 lbs

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

Suttner ST-555 Professional Sandblaster #7.5 Stainless Steel with Adjustable Sand Flow. Removes coatings from almost any surface. Ideal for cleaning of machines, technical facilities, facades and masonry. Thanks to its stainless steel body, the ST-555 features utmost pressure resistance up to a continuous operating pressure of 7,250 PSI. The three symmetrical high-pressure nozzles in the blasting head provide for a flow of the blasting agent without any deflections. This is how wear of the ceramic diffuser nozzle with TPE coating is reduced to a minimum and pulse energy of the blasting agent is used optimally

FEATURES:
• High Quality, German engineered components
• The Sandblaster ST-555 has stainless steel construction 
• The sandblaster is suitable for dust-free blasting of solids with a grain size ranging from 0.4 to 0.8 mm
• With suction quantity control at the double suction pipe
• Sand blasting nozzle made of high-performance ceramics
• Inclusive: 3 hardened stainless steel nozzles

Multiple mediums can be used:
• Glass beads for cleaning of copper and bronze as well as polishing of stainless steel
• Glass powder for cleaning of stainless steel and natural stone or for removal of graffiti from light surfaces
• Slag (fine) for cleaning of sandstone or brick as well as removal of graffiti from dark surfaces
• Slag (coarse) removal of rust from metals or of old coatings and paintings. cleaning and grinding of concrete surfaces
• Sodium carbonate (water-soluble) cleaning of sensitive surfaces such as aluminum, glass, plastics, stainless steel
• Mineral blasting agent (sand) removal of rust from metals or of old coatings and paintings. Cleaning and grinding of concrete surfaces. Varnish removal

ST-555 Sandblaster on YouTube

SPECIFICATIONS:
• Nozzle Size: # 7.5
• Min Flow Rate: 3.0 GPM
• Max Flow Rate: 7.5 GPM
• Max Pressure: 7,250 PSI
• Max Temp: 212° F
• Hose Length: 13'
• Inlet: Male M22, Yoke/Stem: 14MM
• Weight: 4.92 lbs

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

Suttner #4.5 ST-160.3A Extreme Air Assisted Stainless Steel Chemical Injector with 3 Pairs of Injectors & Nozzles. Injector for large water quantities and high dosages. Chemically resistant stainless steel 1.4305 / AISI 304 with compressed air connection and wall bracket

Features
• Extreme chemical injectors for PH Level 2.0 or below
• The stainless steel injector features three pairs of injector and nozzle in one housing which can be configured independently. This enables numerous metering and foam applications
• In order to produce large foam quantities in the low-pressure range, the injector is provided with an compressed air connection
• You can inject 3 of the same or three different cleaning agents at the same time
• Maximum draw rate per line is 7 – 8%
• Total injector draw rate will be 21% – 24%
• Each injector draw barb comes with a packet of dosing nozzles if you want to meter some of or all 3 draw lines

Specifications
• Nozzle/Orifice Size: 4.5
• Flow Rate: 1 - 24 GPM
• Pressure: 90 - 5,000 PSI
• Max Temp: 194° F.
• Inlet: 1/2” Female
• Outlet: 1/2” Female
• Air Connection: 1/4” Male
• Hose Barbs: .35” ID hose
• Note: Optimum foam created 130°F or less
• Weight: 3.55 lb

Please use Nozzle Chart to determine proper nozzle size

Note: If between sizes, choose the larger nozzle size

Nozzle Chart

Suttner #9.0 ST-160.3A Extreme Air Assisted Stainless Steel Chemical Injector with 3 Pairs of Injectors & Nozzles. Injector for large water quantities and high dosages. Chemically resistant stainless steel 1.4305 / AISI 304 with compressed air connection and wall bracket

Features
• Extreme chemical injectors for PH Level 2.0 or below
• The stainless steel injector features three pairs of injector and nozzle in one housing which can be configured independently. This enables numerous metering and foam applications
• In order to produce large foam quantities in the low-pressure range, the injector is provided with an compressed air connection
• You can inject 3 of the same or three different cleaning agents at the same time
• Maximum draw rate per line is 7 – 8%
• Total injector draw rate will be 21% – 24%
• Each injector draw barb comes with a packet of dosing nozzles if you want to meter some of or all 3 draw lines

Specifications
• Nozzle/Orifice Size: 9.0
• Flow Rate: 1 - 24 GPM
• Pressure: 90 - 5,000 PSI
• Max Temp: 194° F.
• Inlet: 1/2” Female
• Outlet: 1/2” Female
• Air Connection: 1/4” Male
• Hose Barbs: .35” ID hose
• Note: Optimum foam created 130°F or less
• Weight: 3.55 lb

Please use Nozzle Chart to determine proper nozzle size

Note: If between sizes, choose the larger nozzle size

Nozzle Chart

Features
• Designed like regular spray gun with pressure control trigger
• Designed with operator safety in mind
• Light-weight
• Steam nozzle included

Specifications
• Max Pressure: 290 PSI
• Max Temp: 392° F.
• Inlet: 3/4" Female NPT
• Outlet: Steam nozzle
• Length: 30”
• Weight: 2.25 lb

Features:
• Pedal and valve are in protective housing
• Inlet and outlet are positioned to help keep hose out of the way
• Stainless steel construction for durability and stability
• Can be used in other applications

Specifications:
• Inlet: 1/4” FPT
• Outlet: 1/4” FPT
• Maximum Pressure: 7,300 PSI
• Max. Flow Rate: 21.0 GPM
• Max. Temp.: 300º F.
• Weight: 9.85 lbs.

Suttner ST-164 Stainless Steel Chemical Bypass Injector, #2.4 - 3.2, 5000 Psi, 3/8" F x 1/2” F

Field of Application
• Designed for the cleaning of vehicles carrying cattle, food, frozen foods and fish in order to avoid bacterial spread. Also suitable for cleaning milking parlours and applicable in cattle bredding, piggery, poultry farming and in the pisciculture
• The foam device is a combination made out of stainless steel and special high performance plastics. The addition of one out of two connected chemicals is determined by positioning the lever. All versions are suitable for the addition in low pressure from approx. 43 PSI up to max. 5,076 PSI
• When being operated in rinsing function up to 15.85 GPM pass through the unit without any drop in pressure
• Locks in position for accurate metering
• In combination with a foam lance (ST-72 or ST-75), an adjustable or a triple nozzle the ST-164 injector can suck in chemicals by means of the integrated check valve made out of stainless steel and spray them on or foam them depending on the chosen nozzle
• The ST-164 injector is available in the nozzle size of 3.5 – 11.0
• The dosing is adjusted by one of the 18 nozzle inserts which are included in the consignment. The connection for chemicals is equipped with an integrated check valve

Features
• Integrated lever that allows you to go from disinfectant to foam to rinse
• Food grade quality and specifications
• Durable Stainless steel construction
• 18 Dosing nozzles included
• Use 0.35 ID hose

Specifications
• Nozzle/Orifice Size: 2.4 - 3.2
• Max Flow Rate: 21 GPM
• Min Flow Rate: 1 GPM
• Max Pressure: 5,000 PSI
• Min Pressure: 1,200 PSI
• Max Temp: 212° F.
• Inlet: 3/8” Female
• Outlet: 1/2” Female
• Hose Barbs: .35” ID hose
• Weight: 4.80 lb

Please use Nozzle Chart to determine proper nozzle size

Note: If between sizes, choose the larger nozzle size

Nozzle Chart

See the ST-164 System Diagram below to determine the foam components needed

ST-164 System Diagram

Suttner ST-164 Stainless Steel Chemical Bypass Injector, #3.0, 5000 Psi, 3/8" F x 1/2” F

Field of Application
• Designed for the cleaning of vehicles carrying cattle, food, frozen foods and fish in order to avoid bacterial spread. Also suitable for cleaning milking parlours and applicable in cattle bredding, piggery, poultry farming and in the pisciculture
• The foam device is a combination made out of stainless steel and special high performance plastics. The addition of one out of two connected chemicals is determined by positioning the lever. All versions are suitable for the addition in low pressure from approx. 43 PSI up to max. 5,076 PSI
• When being operated in rinsing function up to 15.85 GPM pass through the unit without any drop in pressure
• Locks in position for accurate metering
• In combination with a foam lance (ST-72 or ST-75), an adjustable or a triple nozzle the ST-164 injector can suck in chemicals by means of the integrated check valve made out of stainless steel and spray them on or foam them depending on the chosen nozzle
• The ST-164 injector is available in the nozzle size of 3.5 – 11.0
• The dosing is adjusted by one of the 18 nozzle inserts which are included in the consignment. The connection for chemicals is equipped with an integrated check valve

Features
• Integrated lever that allows you to go from disinfectant to foam to rinse
• Food grade quality and specifications
• Durable Stainless steel construction
• 18 Dosing nozzles included
• Use 0.35 ID hose

Specifications
• Nozzle/Orifice Size: 3.0
• Max Flow Rate: 21 GPM
• Min Flow Rate: 1 GPM
• Max Pressure: 5,000 PSI
• Min Pressure: 1,200 PSI
• Max Temp: 212° F.
• Inlet: 3/8” Female
• Outlet: 1/2” Female
• Hose Barbs: .35” ID hose
• Weight: 4.80 lb

Please use Nozzle Chart to determine proper nozzle size

Note: If between sizes, choose the larger nozzle size

Nozzle Chart

See the ST-164 System Diagram below to determine the foam components needed

ST-164 System Diagram

Suttner ST-164 Stainless Steel Chemical Bypass Injector, #4.0, 5000 Psi, 3/8" F x 1/2” F

Field of Application
• Designed for the cleaning of vehicles carrying cattle, food, frozen foods and fish in order to avoid bacterial spread. Also suitable for cleaning milking parlours and applicable in cattle bredding, piggery, poultry farming and in the pisciculture
• The foam device is a combination made out of stainless steel and special high performance plastics. The addition of one out of two connected chemicals is determined by positioning the lever. All versions are suitable for the addition in low pressure from approx. 43 PSI up to max. 5,076 PSI
• When being operated in rinsing function up to 15.85 GPM pass through the unit without any drop in pressure
• Locks in position for accurate metering
• In combination with a foam lance (ST-72 or ST-75), an adjustable or a triple nozzle the ST-164 injector can suck in chemicals by means of the integrated check valve made out of stainless steel and spray them on or foam them depending on the chosen nozzle
• The ST-164 injector is available in the nozzle size of 3.5 – 11.0
• The dosing is adjusted by one of the 18 nozzle inserts which are included in the consignment. The connection for chemicals is equipped with an integrated check valve

Features
• Integrated lever that allows you to go from disinfectant to foam to rinse
• Food grade quality and specifications
• Durable Stainless steel construction
• 18 Dosing nozzles included
• Use 0.35 ID hose

Specifications
• Nozzle/Orifice Size: 4.0
• Max Flow Rate: 21 GPM
• Min Flow Rate: 1 GPM
• Max Pressure: 5,000 PSI
• Min Pressure: 1,200 PSI
• Max Temp: 212° F.
• Inlet: 3/8” Female
• Outlet: 1/2” Female
• Hose Barbs: .35” ID hose
• Weight: 4.80 lb

Please use Nozzle Chart to determine proper nozzle size

Note: If between sizes, choose the larger nozzle size

Nozzle Chart

See the ST-164 System Diagram below to determine the foam components needed

ST-164 System Diagram