Suttner America

1/4” Suttner #4.5 ST-49 Milling Sewer Cleaning Nozzle. With 3 Front and 4 Rear jets and rated to 5,076 PSI

Features:
• High Quality, German engineered components
• With its 3 very strong concentrated forward jets and the sharp cutting edges the milling type nozzles will tear through almost any kind of blockage
• The sharp edges cut, break and penetrate through every kind of blockage
• Made out of wear-resistant, hardened stainless steel
• Centric jet is plugged
• 3 Lateral front jets 0.5 mm drilled
• 4 Rear jets with nozzle inserts
• Nozzle is equipped with replaceable hardened stainless steel centric front and rear jets
• Due to this feature the efficiency is considerably higher compared with those nozzles with drilled holes and the service life is several times longer

Applications:
• Penetration of completely clogged pipes
• Opening of root masses
• Opening of frozen pipelines
• Hydraulic thrust boring flushing operations

Specifications:
• Nozzle Size: # 4.5
• Material: Stainless steel
• Maximum Pressure: 5,076 PSI
• Inlet: 1/4” Female
• Outside Diameter (O.D.): .95”
• Weight: 2.8 oz

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

1/4” Suttner #6.0 ST-49 Milling Sewer Cleaning Nozzle. With 3 Front and 4 Rear jets and rated to 5,076 PSI

Features:
• High Quality, German engineered components
• With its 3 very strong concentrated forward jets and the sharp cutting edges the milling type nozzles will tear through almost any kind of blockage
• The sharp edges cut, break and penetrate through every kind of blockage
• Made out of wear-resistant, hardened stainless steel
• Centric jet is plugged
• 3 Lateral front jets 0.5 mm drilled
• 4 Rear jets with nozzle inserts
• Nozzle is equipped with replaceable hardened stainless steel centric front and rear jets
• Due to this feature the efficiency is considerably higher compared with those nozzles with drilled holes and the service life is several times longer

Applications:
• Penetration of completely clogged pipes
• Opening of root masses
• Opening of frozen pipelines
• Hydraulic thrust boring flushing operations

Specifications:
• Nozzle Size: # 6.0
• Material: Stainless steel
• Maximum Pressure: 5,076 PSI
• Inlet: 1/4” Female
• Outside Diameter (O.D.): .95”
• Weight: 2.8 oz

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

1/4” Suttner #7.0 ST-49 Milling Sewer Cleaning Nozzle. With 3 Front and 4 Rear jets and rated to 5,076 PSI

Features:
• High Quality, German engineered components
• With its 3 very strong concentrated forward jets and the sharp cutting edges the milling type nozzles will tear through almost any kind of blockage
• The sharp edges cut, break and penetrate through every kind of blockage
• Made out of wear-resistant, hardened stainless steel
• Centric jet is plugged
• 3 Lateral front jets 0.5 mm drilled
• 4 Rear jets with nozzle inserts
• Nozzle is equipped with replaceable hardened stainless steel centric front and rear jets
• Due to this feature the efficiency is considerably higher compared with those nozzles with drilled holes and the service life is several times longer

Applications:
• Penetration of completely clogged pipes
• Opening of root masses
• Opening of frozen pipelines
• Hydraulic thrust boring flushing operations

Specifications:
• Nozzle Size: # 7.0
• Material: Stainless steel
• Maximum Pressure: 5,076 PSI
• Inlet: 1/4” Female
• Outside Diameter (O.D.): .95”
• Weight: 2.8 oz

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

1/4” Suttner #8.0 ST-49 Milling Sewer Cleaning Nozzle. With 3 Front and 4 Rear jets and rated to 5,076 PSI

Features:
• High Quality, German engineered components
• With its 3 very strong concentrated forward jets and the sharp cutting edges the milling type nozzles will tear through almost any kind of blockage
• The sharp edges cut, break and penetrate through every kind of blockage
• Made out of wear-resistant, hardened stainless steel
• Centric jet is plugged
• 3 Lateral front jets 0.5 mm drilled
• 4 Rear jets with nozzle inserts
• Nozzle is equipped with replaceable hardened stainless steel centric front and rear jets
• Due to this feature the efficiency is considerably higher compared with those nozzles with drilled holes and the service life is several times longer

Applications:
• Penetration of completely clogged pipes
• Opening of root masses
• Opening of frozen pipelines
• Hydraulic thrust boring flushing operations

Specifications:
• Nozzle Size: # 8.0
• Material: Stainless steel
• Maximum Pressure: 5,076 PSI
• Inlet: 1/4” Female
• Outside Diameter (O.D.): .95”
• Weight: 2.8 oz

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

1/4” Suttner #10.0 ST-49 Milling Sewer Cleaning Nozzle. With 3 Front and 4 Rear jets and rated to 5,076 PSI

Features:
• High Quality, German engineered components
• With its 3 very strong concentrated forward jets and the sharp cutting edges the milling type nozzles will tear through almost any kind of blockage
• The sharp edges cut, break and penetrate through every kind of blockage
• Made out of wear-resistant, hardened stainless steel
• Centric jet is plugged
• 3 Lateral front jets 0.5 mm drilled
• 4 Rear jets with nozzle inserts
• Nozzle is equipped with replaceable hardened stainless steel centric front and rear jets
• Due to this feature the efficiency is considerably higher compared with those nozzles with drilled holes and the service life is several times longer

Applications:
• Penetration of completely clogged pipes
• Opening of root masses
• Opening of frozen pipelines
• Hydraulic thrust boring flushing operations

Specifications:
• Nozzle Size: # 10.0
• Material: Stainless steel
• Maximum Pressure: 5,076 PSI
• Inlet: 1/4” Female
• Outside Diameter (O.D.): .95”
• Weight: 2.8 oz

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

1/4” Suttner #12.0 ST-49 Milling Sewer Cleaning Nozzle. With 3 Front and 4 Rear jets and rated to 5,076 PSI

Features:
• High Quality, German engineered components
• With its 3 very strong concentrated forward jets and the sharp cutting edges the milling type nozzles will tear through almost any kind of blockage
• The sharp edges cut, break and penetrate through every kind of blockage
• Made out of wear-resistant, hardened stainless steel
• Centric jet is plugged
• 3 Lateral front jets 0.5 mm drilled
• 4 Rear jets with nozzle inserts
• Nozzle is equipped with replaceable hardened stainless steel centric front and rear jets
• Due to this feature the efficiency is considerably higher compared with those nozzles with drilled holes and the service life is several times longer

Applications:
• Penetration of completely clogged pipes
• Opening of root masses
• Opening of frozen pipelines
• Hydraulic thrust boring flushing operations

Specifications:
• Nozzle Size: # 12.0
• Material: Stainless steel
• Maximum Pressure: 5,076 PSI
• Inlet: 1/4” Female
• Outside Diameter (O.D.): .95”
• Weight: 2.8 oz

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

Features:
• High Quality, German engineered components
• Threads are rolled on providing consistent sealing and four times the strength than cut threads
• Adjustable handle
• Chemical resistant

Specifications:
• Length: 20"
• Pipe Material: Stainless steel
• Inlet: 1/2” Male NPT
• Outlet: 1/4” Female NPT
• Maximum Pressure: 8,700 PSI
• Max. Temp.: 300° F
• Weight: 2.35 lbs.

Suttner ST-285 Unloader Valve 3,625 PSI 26 GPM 1/2" F. Suttner unloader valve ST-285 for high flow rates. Particularly durable! High-quality combination of materials

Features:
• Soft switching behavior
• Fatigue-free spring
• Particularly easy to maintain
• Low pressure drop
• Sealing seats in high grade stainless steel and Ceramic ball in bypass

Flyer

Specifications:
• Max Pressure: 3,625 PSI
• Flow Rate: 26 GPM
• Max Temperature: 194° F
• Inlet Port: 1/2" F
• Outlet Port: 1/2” F
• Bypass Port: 1/2” F
• Weight: 2.10 lbs

Suttner ST-505 Stainless Steel Vertical Mount Flow Switch Rated to 8,700 PSI. Vertical mounting position and free floating brass magnet configuration

Features:
• Vertical mounting ONLY
• Mounts further downstream in pumping system than traditional vacuum switches, thereby minimizing potential leak points that can cause vacuum switches to close
• Easy reed switch replacement

Specifications:
• Max. Pressure: 8,700 PS
• Min. Pressure: 75 PSI
• Max. Flow Rate: 8 GPM
• Min. Flow Rate: 1 GPM
• Max Voltage: 250 V
• Max Current: 3 Amps
• Max: Fluid Temperature: 176° F
• Cable Length: 47.0”
• Inlet & Outlet: 3/8” FNPT
• Housing: Stainless Steel
• Color: Blue
• 3/8” Bonded seal #78888389 is recommended to seal inlet and outlet threads
• Weight: 0.90 lbs

Features
• Water flowing through the high pressure nozzle creates a powerful venturi suction that vacuums up slurry solutions
• Debris as large as 3/4” will pass through the casting and out the discharge hose
• Vacuums up liquid slurries at a ratio of about 1:11 Example: Using 4 GPM will produce an output of 44 GPM
• Hose barb 1 1/2"

Suttner ST-36 Sludge Pump In Action on YouTube

Specifications
• Nozzle Size: 4.0 (0 degree)
• Flow Rate: 11:1
• Max Pressure: 4,000 PSI
• Hose Length: 15’
• Max Temp: 104° F.
• Inlet: 1/4" Male QC Plug
• Weight: 5.5 lb

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

Suttner ST-36 Sludge Pump (03.0) w/ 15' Hose, 1/4" QC Inlet. Attaches to pressure washer and turns it into a high output pump. Great for flood cleanup, car wash pits, draining pools or chemical spills

Features
• Water flowing through the high pressure nozzle creates a powerful venturi suction that vacuums up slurry solutions
• Debris as large as 3/4” will pass through the casting and out the discharge hose
• Vacuums up liquid slurries at a ratio of about 1:11 Example: Using 4 GPM will produce an output of 44 GPM
• Hose barb 1 1/2"

Suttner ST-36 Sludge Pump In Action on YouTube

Specifications
• Nozzle Size: 3.0 (0 degree)
• Flow Rate: 11:1
• Max Pressure: 4,000 PSI
• Hose Length: 15’
• Max Temp: 104° F.
• Inlet: 1/4" Male QC Plug
• Weight: 5.5 lb

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

Suttner 38” ST-53.2 Stainless Steel Dual Lance 5,800 PSI With Brass Soap Nozzle and Nozzle Protectors. For use when high and low pressures are needed. For example, spraying cleaning agents with low pressure through an injector valve (chemical injector required) and then cleaning with high pressure

Features
• The serious high pressure spray contractors choice
• High Quality, German engineered components
• Stainless steel construction
• Features our comfortable ergonomic shaped cool & compact molded grip resistant to heat
• Suitable for corrosive chemicals
• Simple Hi/Low pressure adjustment valve
• Premium dual-purpose lance that adds extreme versatility to your cleaning tools and accessories
• Lance is equipped with 65° x #30 low pressure brass soap nozzle
• Nozzle protectors included
• Optional stainless steel soap nozzle available

Specifications
• Max Pressure: 5,800 PSI
• Length: 38.5”
• Max Temp: 302° F.
• Lance & Valve Material: Stainless steel
• Inlet: 1/4" Male NPT
• Outlets: 1/4" Female NPT x 1/4” Soap Nozzle
• Note: 1/4” MPT Nozzle not included
• Weight: 2.75 lb

Features
• High Quality, German engineered components
• Vented grip can be pushed and pulled to make lance angle from 20° to 90°
• Each desired angle remains stationary until adjusted
• Cleans hard to reach areas easier saving time and money

See ST-85 in action on YouTube

Specifications
• Max Pressure: 3,050 PSI
• Length: 33”
• Max Temp: 300° F.
• Inlet: 1/4" Female NPT
• Outlet: 1/4" Female NPT
• Note: 1/4” MPT Nozzle not included
• Weight: 2.22 lb

3/8” Suttner # 8.0 Warhead / Egg Sewer Cleaning Nozzle. With 1 Front, 6 Rear jets and rated to 7,250 PSI. These are light and agile used as a great all around nozzle with replaceable inserts. They include a forward jet.

Features:
• High Quality, German engineered components
• Best performing and most durable design for higher efficiency
• The egg-type radial nozzle is wear resistant and cost competitive
• Great for sanitary applications
• Hardened stainless steel body and threaded inserts can easily be serviced/replaced for longer life span

Specifications:
• Nozzle Size: # 8.0
• Jets: 1 at 0°
• Jets: 6 at 75°
• Material: Stainless steel
• Maximum Pressure: 7,250 PSI
• Inlet: 3/8” Female
• Outside Diameter (O.D.): 1.38”
• Length: 1.97”
• Weight: 7.30 oz

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

3/8” Suttner # 10.0 Warhead / Egg Sewer Cleaning Nozzle. With 1 Front, 6 Rear jets and rated to 7,250 PSI. These are light and agile used as a great all around nozzle with replaceable inserts. They include a forward jet.

Features:
• High Quality, German engineered components
• Best performing and most durable design for higher efficiency
• The egg-type radial nozzle is wear resistant and cost competitive
• Great for sanitary applications
• Hardened stainless steel body and threaded inserts can easily be serviced/replaced for longer life span

Specifications:
• Nozzle Size: # 10.0
• Jets: 1 at 0°
• Jets: 6 at 75°
• Material: Stainless steel
• Maximum Pressure: 7,250 PSI
• Inlet: 3/8” Female
• Outside Diameter (O.D.): 1.38”
• Length: 1.97”
• Weight: 7.30 oz

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

3/8” Suttner # 12.0 Warhead / Egg Sewer Cleaning Nozzle. With 1 Front, 6 Rear jets and rated to 7,250 PSI. These are light and agile used as a great all around nozzle with replaceable inserts. They include a forward jet.

Features:
• High Quality, German engineered components
• Best performing and most durable design for higher efficiency
• The egg-type radial nozzle is wear resistant and cost competitive
• Great for sanitary applications
• Hardened stainless steel body and threaded inserts can easily be serviced/replaced for longer life span

Specifications:
• Nozzle Size: # 12.0
• Jets: 1 at 0°
• Jets: 6 at 75°
• Material: Stainless steel
• Maximum Pressure: 7,250 PSI
• Inlet: 3/8” Female
• Outside Diameter (O.D.): 1.38”
• Length: 1.97”
• Weight: 7.30 oz

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

3/8” Suttner # 15.0 Warhead / Egg Sewer Cleaning Nozzle. With 1 Front, 6 Rear jets and rated to 7,250 PSI. These are light and agile used as a great all around nozzle with replaceable inserts. They include a forward jet.

Features:
• High Quality, German engineered components
• Best performing and most durable design for higher efficiency
• The egg-type radial nozzle is wear resistant and cost competitive
• Great for sanitary applications
• Hardened stainless steel body and threaded inserts can easily be serviced/replaced for longer life span

Specifications:
• Nozzle Size: # 15.0
• Jets: 1 at 0°
• Jets: 6 at 75°
• Material: Stainless steel
• Maximum Pressure: 7,250 PSI
• Inlet: 3/8” Female
• Outside Diameter (O.D.): 1.38”
• Length: 1.97”
• Weight: 7.30 oz

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

3/8” Suttner # 20.0 Warhead / Egg Sewer Cleaning Nozzle. With 1 Front, 6 Rear jets and rated to 7,250 PSI. These are light and agile used as a great all around nozzle with replaceable inserts. They include a forward jet.

Features:
• High Quality, German engineered components
• Best performing and most durable design for higher efficiency
• The egg-type radial nozzle is wear resistant and cost competitive
• Great for sanitary applications
• Hardened stainless steel body and threaded inserts can easily be serviced/replaced for longer life span

Specifications:
• Nozzle Size: # 20.0
• Jets: 1 at 0°
• Jets: 6 at 75°
• Material: Stainless steel
• Maximum Pressure: 7,250 PSI
• Inlet: 3/8” Female
• Outside Diameter (O.D.): 1.38”
• Length: 1.97”
• Weight: 7.30 oz

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

3/8” Suttner # 6.5 Warhead / Egg Sewer Cleaning Nozzle. With 1 Front, 6 Rear jets and rated to 7,250 PSI. These are light and agile used as a great all around nozzle with replaceable inserts. They include a forward jet.

Features:
• High Quality, German engineered components
• Best performing and most durable design for higher efficiency
• The egg-type radial nozzle is wear resistant and cost competitive
• Great for sanitary applications
• Hardened stainless steel body and threaded inserts can easily be serviced/replaced for longer life span

Specifications:
• Nozzle Size: # 6.5
• Jets: 1 at 0°
• Jets: 6 at 75°
• Material: Stainless steel
• Maximum Pressure: 7,250 PSI
• Inlet: 3/8” Female
• Outside Diameter (O.D.): 1.38”
• Length: 1.97”
• Weight: 7.30 oz

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

3/4” Suttner #40.0 ST-49 Bullet Sewer Cleaning Nozzle. With 6 Rear jet inserts and rated to 7,252 PSI

Features:
• High Quality, German engineered components
• Made out of wear-resistant, hardened stainless steel
• Front jet is plugged
• 6 Rear jets with nozzle inserts
• All nozzles are provided with exchangeable stainless steel inserts
• Due to this feature the efficiency is considerably higher compared with those nozzles with drilled holes and the service life is several times longer

Applications:
• Extreme pulling and cleaning power
• All around cleaning of dirty or blocked sewers

Specifications:
• Nozzle Size: # 40.0
• Material: Stainless steel
• Maximum Pressure: 7,252 PSI
• Inlet: 3/4” Female
• Outside Diameter (O.D.): 1.496”
• Weight: 11.8 oz

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart