Suttner America

1/8” Suttner # 9.0 ST-49 Ram Sewer Nozzle 0 Front 3 Rear 4,200 PSI.

Features
• High Quality, German engineered components
• 3 Rear jets (30°) for maximum thrust and simultaneously, a flushing away of the waste material
• Stainless steel
• Works best on 1" to 3" Pipes

Specifications
• Nozzle Size: # 9.0
• Material: Stainless steel
• Maximum Pressure: 4,200 PSI
• Inlet: 1/8” Female
• Outside Diameter (O.D.): .59”
• Weight: .60 oz

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

1/4” Suttner # 4.5 ST-49 Ram Sewer Nozzle 0 Front 3 Rear 4,200 PSI.

Features
• High Quality, German engineered components
• 3 Rear jets (30°) for maximum thrust and simultaneously, a flushing away of the waste material
• Stainless steel
• Works best on 2" to 4" Pipes

Specifications
• Nozzle Size: # 4.5
• Material: Stainless steel
• Maximum Pressure: 4,200 PSI
• Inlet: 1/4” Female
• Outside Diameter (O.D.): .75”
• Weight: .60 oz

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

Suttner ST-6 Any Position Flow Switch. Mounts in any position and spring assisted brass magnet configuration

Features:
• Can be mounted horizontal or vertical
• Reed switch encased in protective vacuum sealed glass tube eliminating exposure to corrosive cleaning chemicals
• Mounts further downstream in pumping system than traditional vacuum switches, thereby minimizing potential leak points that can cause vacuum switches to close
• Easy reed switch replacement
• Most proven and reliable flow switches in the industry

Specifications:
• Max. Pressure: 5,070 PSI
• Min. Pressure: 75 PSI
• Max. Flow Rate: 8.0 GPM
• Min. Flow Rate: 1 GPM
• Contact: 1 A - 250 V
• Max: Fluid Temperature: 176° F
• Cable Length: 47.0”
• Inlet & Outlet: 3/8” MPT
• Housing: Brass
• Replaces 200006540
• Weight: 0.80 lbs

Suttner St-003 36” Nickel Chrome Plated Steel 6,000 PSI Non-Insulated Lance. Suitable when using corrosive chemical. Suttner’s most popular lances for cold or hot water applications

Features:
• High Quality, German engineered components
• Nickel chrome plated steel to prevent rusting
• Threads are rolled on providing consistent sealing and four times the strength than cut threads

Specifications:
• Length: 36"
• Pipe Material: Nickel chrome plated steel
• Inlet: 1/4” MNPT
• Outlet: 1/4” MNPT
• Maximum Pressure: 6,000 PSI
• Max. Temp.: 300° F
• Weight: 0.96 lbs.

Suttner ST-5 Vertical Mount Flow Switch. Vertical mounting position and free floating brass magnet configuration

Features:
• Vertical mounting ONLY
• Reed switch encased in protective vacuum sealed glass tube eliminating exposure to corrosive cleaning chemicals
• Mounts further downstream in pumping system than traditional vacuum switches, thereby minimizing potential leak points that can cause vacuum switches to close
• Easy reed switch replacement
• Most proven and reliable flow switches in the industry

Specifications:
• Max. Pressure: 4,380 PS
• Min. Pressure: 75 PSI
• Max. Flow Rate: 8 GPM
• Min. Flow Rate: 1 GPM
• Contact: 1 A - 250 V
• Max: Fluid Temperature: 176° F
• Cable Length: 47.0”
• Inlet & Outlet: 3/8” FNPT
• Housing: Brass
• Color: Black
• Replaces 200005500
• Weight: 0.98 lbs

Suttner Heavy Duty 4,000 PSI Pressure Washer Trigger Gun and Lance Kit. Industry standard, the ST-1500 is well-suited for a variety of industrial pressure washing applications. Includes all the components necessary to assemble the wand

Kit Components:
• Suttner ST-1500 5,000 PSI Trigger Gun
• Suttner ST-007 36” Nickel Plated Molded Grip Lance 6,000 PSI
• General Pump brass 5,000 PSI quick coupler socket
• General Pump zinc plated 4,000 PSI steel quick coupler plug
• Teflon Tape: 1 Roll

Specifications:
• Max Pressure: 4,000 PSI
• Max Flow: 10.4 GPM
• Max Temperature: 300° F
• Trigger Gun Inlet: 3/8" Male QC plug
• Lance Outlet: 1/4" Female QC socket (accepts QC color coded nozzles)
• Note: Assembly is required
• Weight: 3.10 lbs

Suttner Heavy Duty 5,000 PSI Easy Pull Pressure Washer Trigger Gun and Lance Kit. Comfort technology designed “easy-pull trigger” and comfortable grip provide ease when working long hours. Includes all the components necessary to assemble the wand

Kit Components:
• Suttner ST-2305 Easy Pull 5,000 PSI Trigger Gun
• Suttner ST-007 36” Nickel Plated Molded Grip Lance 6,000 PSI
• General Pump stainless Steel 6,000 PSI quick coupler socket
• General Pump stainless Steel 6,000 PSI quick coupler plug
• Teflon Tape: 1 Roll

Specifications:
• Max Pressure: 5,000 PSI
• Max Flow: 12.0 GPM
• Max Temperature: 300° F
• Trigger Gun Inlet: 3/8" Male QC SS plug
• Lance Outlet: 1/4" Female QC SS socket (accepts QC color coded nozzles)
• Note: Assembly is required
• Weight: 3.10 lbs

Suttner ST-2 12" Lance Insulator. Insulates a bare lance and conforms to the curvature of the hand allowing for longer working hours

Features:
• Easily adjusts anywhere on lance for anyone's desired ergonomic position
• Durable hardened plastic

Specifications
• Fits St-001 and ST-003 lances
• Length: 12.75”
• Max Temp: 300°
• Material: Durable hardened plastic
• Weight: 0.50 lb

3/8” Suttner #9.0 ST-49 Milling Sewer Cleaning Nozzle. With 1 Centric, 3 Front and 6 Rear jets and rated to 5,076 PSI

Features:
• High Quality, German engineered components
• With its 4 very strong concentrated forward jets and the sharp cutting edges the milling type nozzles will tear through almost any kind of blockage
• The sharp edges cut, break and penetrate through every kind of blockage
• Made out of wear-resistant, hardened stainless steel
• 1 Centric front jet with nozzle insert
• 3 Lateral front jets with nozzle inserts
• 6 Rear jets with nozzle inserts
• Nozzle is equipped with replaceable hardened stainless steel nozzle inserts
• Due to this feature the efficiency is considerably higher compared with those nozzles with drilled holes and the service life is several times longer

Applications:
• Penetration of completely clogged pipes
• Opening of root masses
• Opening of frozen pipelines
• Hydraulic thrust boring flushing operations

Specifications:
• Nozzle Size: # 9.0
• Material: Stainless steel
• Maximum Pressure: 5,076 PSI
• Inlet: 3/8” Female
• Outside Diameter (O.D.): 1.11”
• Weight: 4.0 oz

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

3/8” F Suttner #9.0 ST-49 Turbo Nozzle Driver With 6 Rear jet inserts and rated to 5,076 PSI

Features:
• High Quality, German engineered components
• Turbo nozzle driver and ST-356 or ST-456 turbo nozzle are the perfect combination for drilling through blockages with its rotary forward facing jet
• Driven up to the blockage by 6 powerful rear facing hardened stainless steel nozzles the high speed forward facing spinning jet creates a cone shape that has enough cutting force to blast through roots and scale
• It is also ideal for cutting up and shredding tissue and fat deposits

Note:
• Above shown item (1st Picture) is for the driver portion only
• You will have to add the corresponding ST-357 or ST-456 turbo nozzle to complete the driver (2nd Picture)

Specifications:
• Material: Hardened stainless steel
• Maximum Pressure: 5,076 PSI
• Inlet (Sewer Hose): 3/8” Female
• Outlet (Turbo Nozzle): 1/4” Male
• Nozzle Size: # 9.0 (With a #3.0 ST-357 or ST-456 nozzle)
• Note: Requires #3.0 ST-357 or ST-456 1/4” turbo nozzle (Not Included)
• Weight: 0.20 lbs

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

Suttner ST-5 Any Position Flow Switch. Mounts in any position with a free floating magnet configuration

Features:
• Can be mounted horizontal or vertical
• Mounts further downstream in pumping system than traditional vacuum switches, thereby minimizing potential leak points that can cause vacuum switches to close
• Easy brass reed switch replacement

Specifications:
• Max. Pressure: 5,070 PS
• Min. Pressure: 75 PSI
• Max. Flow Rate: 7.8 GPM
• Min. Flow Rate: 1 GPM
• Contact: 1 A - 250 V
• Max: Fluid Temperature: 180° F
• Cable Length: 47.0”
• Inlet & Outlet: 3/8” FNPT
• Housing: Brass
• Color: Grey
• Replaces 200005600
• Weight: 0.98 lbs

Suttner St-007 60” Nickel Chrome Plated Steel 6,000 PSI Lance with Molded Grip. Suitable when using corrosive chemical. Suttner’s most popular lances for cold or hot water applications

Features:
• High Quality, German engineered components
• Comfort technology designed molded grip conforms to the curvature of the hand, allowing to comfortably change positions and work longer hours
• Linear aeration provides continuous air flow between hand and exclusive Suttner "star-shaped" grip
• Grip is directly molded on to lance providing protection and strength
• Threads are rolled on providing consistent sealing and four times the strength than cut threads

Specifications:
• Length: 60"
• Pipe Material: Nickel chrome plated steel
• Grip: 19.25" Molded "star-shaped"
• Inlet: 1/4” MNPT
• Outlet: 1/4” MNPT
• Maximum Pressure: 6,000 PSI
• Max. Temp.: 300° F
• Weight: 2.14 lbs.

Suttner St-007 12” Nickel Chrome Plated Steel 6,000 PSI Lance with Molded Grip. Suitable when using corrosive chemical. Suttner’s most popular lances for cold or hot water applications

Features:
• High Quality, German engineered components
• Comfort technology designed molded grip conforms to the curvature of the hand, allowing to comfortably change positions and work longer hours
• Linear aeration provides continuous air flow between hand and exclusive Suttner "star-shaped" grip
• Grip is directly molded on to lance providing protection and strength
• Threads are rolled on providing consistent sealing and four times the strength than cut threads

Specifications:
• Length: 12"
• Pipe Material: Nickel chrome plated steel
• Grip: 11" Molded "star-shaped"
• Inlet: 1/4” MNPT
• Outlet: 1/4” MNPT
• Maximum Pressure: 6,000 PSI
• Max. Temp.: 300° F
• Weight: 0.65 lbs.

Suttner St-007 18” Nickel Chrome Plated Steel 6,000 PSI Lance with Molded Grip. Suitable when using corrosive chemical. Suttner’s most popular lances for cold or hot water applications

Features:
• High Quality, German engineered components
• Comfort technology designed molded grip conforms to the curvature of the hand, allowing to comfortably change positions and work longer hours
• Linear aeration provides continuous air flow between hand and exclusive Suttner "star-shaped" grip
• Grip is directly molded on to lance providing protection and strength
• Threads are rolled on providing consistent sealing and four times the strength than cut threads

Specifications:
• Length: 18"
• Pipe Material: Nickel chrome plated steel
• Grip: 15.5" Molded "star-shaped"
• Inlet: 1/4” MNPT
• Outlet: 1/4” MNPT
• Maximum Pressure: 6,000 PSI
• Max. Temp.: 300° F
• Weight: 0.90 lbs.

Suttner St-001 12” Stainless Steel 6,000 PSI Non-Insulated Lance. Stainless steel components create a durable long lasting lance, especially suitable when using alkaline

Features:
• High Quality, German engineered components
• Threads are rolled on providing consistent sealing and four times the strength than cut threads

Specifications:
• Length: 12”
• Pipe Material: Stainless steel
• Inlet: 1/4” MNPT
• Outlet: 1/4” MNPT
• Maximum Pressure: 6,000 PSI
• Max. Temp.: 300° F
• Weight: 0.27 lbs.

Suttner St-001 18” Stainless Steel 6,000 PSI Non-Insulated Lance. Stainless steel components create a durable long lasting lance, especially suitable when using alkaline

Features:
• High Quality, German engineered components
• Threads are rolled on providing consistent sealing and four times the strength than cut threads

Specifications:
• Length: 18”
• Pipe Material: Stainless steel
• Inlet: 1/4” MNPT
• Outlet: 1/4” MNPT
• Maximum Pressure: 6,000 PSI
• Max. Temp.: 300° F
• Weight: 0.40 lbs.

Suttner St-001 24” Stainless Steel 6,000 PSI Non-Insulated Lance. Stainless steel components create a durable long lasting lance, especially suitable when using alkaline

Features:
• High Quality, German engineered components
• Threads are rolled on providing consistent sealing and four times the strength than cut threads

Specifications:
• Length: 24”
• Pipe Material: Stainless steel
• Inlet: 1/4” MNPT
• Outlet: 1/4” MNPT
• Maximum Pressure: 6,000 PSI
• Max. Temp.: 300° F
• Weight: 0.54 lbs.

Suttner St-001 8” Stainless Steel 6,000 PSI Non-Insulated Lance. Stainless steel components create a durable long lasting lance, especially suitable when using alkaline

Features:
• High Quality, German engineered components
• Threads are rolled on providing consistent sealing and four times the strength than cut threads

Specifications:
• Length: 8”
• Pipe Material: Stainless steel
• Inlet: 1/4” MNPT
• Outlet: 1/4” MNPT
• Maximum Pressure: 6,000 PSI
• Max. Temp.: 300° F
• Weight: 0.18 lbs.

Suttner St-003 12” Nickel Chrome Plated Steel 6,000 PSI Non-Insulated Lance. Suitable when using corrosive chemical. Suttner’s most popular lances for cold or hot water applications

Features:
• High Quality, German engineered components
• Nickel chrome plated steel to prevent rusting
• Threads are rolled on providing consistent sealing and four times the strength than cut threads

Specifications:
• Length: 12"
• Pipe Material: Nickel chrome plated steel
• Inlet: 1/4” MNPT
• Outlet: 1/4” MNPT
• Maximum Pressure: 6,000 PSI
• Max. Temp.: 300° F
• Weight: 0.34 lbs.

Suttner St-003 18” Nickel Chrome Plated Steel 6,000 PSI Non-Insulated Lance. Suitable when using corrosive chemical. Suttner’s most popular lances for cold or hot water applications

Features:
• High Quality, German engineered components
• Nickel chrome plated steel to prevent rusting
• Threads are rolled on providing consistent sealing and four times the strength than cut threads

Specifications:
• Length: 18"
• Pipe Material: Nickel chrome plated steel
• Inlet: 1/4” MNPT
• Outlet: 1/4” MNPT
• Maximum Pressure: 6,000 PSI
• Max. Temp.: 300° F
• Weight: 0.46 lbs.