Suttner America

Suttner Pivotable & Lockable ST-330 Stainless Steel Nozzle Holder 5,070 PSI 1/4” F x 1/4” F. Swivel it easily!

Features
• High Quality, German engineered components
• Pivotable and lockable
• Used for cleaning of places which are difficult to access such as container e.g. feeding troughs and gutters
• Effortless and variable shifting of the swivel direction
• Made out of stainless steel
• Capable of swiveling by up to 240°

Specifications
• Max Pressure: 5,070 PSI
• Inlet: 1/4" Female
• Outlet: 1/4" F NPT
• Material: Stainless steel
• Note: 1/4” MPT Nozzle not included
• Weight: 0.40 lb

Suttner ST-1700 5,000 PSI 10.5 GPM LFT. Ergonomic Design Ideal for Smaller Hands Spray Gun

Features
• High Quality, Made In Germany
• Comfortable grip and reduces fatigue for longer working hours
• This unique design reduces wear to a minimum on the internal components
• Great choice for hot and cold pressure washer use
• Perfect gun for smaller hand operators
• Same inlet & outlet angles as our ST-1500 & ST-2000 spray guns
• LFT (Low Friction Trigger) this gun’s trigger system incorporates a ball between the trigger and piston rod contact area that rolls when triggered resulting in a much easier opening and holding
• 30% less vibration transfer than standard trigger guns when being used with turbo nozzles, telescopic lanes, sand blasters, etc
• Requires about 13% less squeeze force than a standard trigger gun to open and hold the trigger. In addition, it has less force while spraying due to the optimum hand position

Specifications
• Max Pressure: 5,000 PSI
• Max Flow: 10.4 GPM
• Max Temp: 300° F.
• Inlet: 3/8" Female NPT
• Outlet: 1/4" Female NPT
• Weight: 1.05 lb

Suttner ST-358 Sewer Jetting Turbo Nozzle 6.0, 5070 PSI, 1 Front Jet & 6 Rear Jets 1/4" F

Features:
• High Quality, Made In Germany
• Great nozzle for cutting, cleaning and removal
• Precision drilled rear drive jets
• All stainless steel construction

Suttner ST-358 Sewer Jetting Turbo Nozzle in Action on YouTube

Specifications:
• Material: Hardened stainless steel
• Maximum Pressure: 5,076 PSI
• Maximum Temperature: 212 ºF
• Inlet: 1/4” Female
• Front Jets: 1
• Rear Jets: 6
• Nozzle Size: # 6.0
• Weight: 0.61 lbs

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

Suttner ST-7.1 Pressure Switch, 580 Switching Point (Black), 1/4" M 4,350 PSI

Features:
• IP 65 protection class
• Simultaneous N/O and N/C connection is possible
• The design of the micro switch allows comparably high inrush current (20 Amps N/C, 15 Amps N/O)
• The electrical capacity of the switch is 10.1 Amps (resistive load)
• No ingress of towing water into the environment of the microswitch possible

Suttner ST-7.1 Data Sheet

Specifications:
• Switch Point: 580 PSI (Black)
• Max. Pressure: 4,350 PS
• Voltage: 10.1 A - 250 VAC
• Max: Fluid Temperature: 194° F
• Cable Length: 37.4”
• Thread: 1/4” Male
• Material: Brass / plastic
• Protection Class” IP 65
• Weight: 0.65 lbs

Suttner ST-7.1 Pressure Switch, 360 Switching Point (Red), 1/4" M 4,350 PSI

Features:
• IP 65 protection class
• Simultaneous N/O and N/C connection is possible
• The design of the micro switch allows comparably high inrush current (20 Amps N/C, 15 Amps N/O)
• The electrical capacity of the switch is 10.1 Amps (resistive load)
• No ingress of towing water into the environment of the microswitch possible

Suttner ST-7.1 Data Sheet

Specifications:
• Switch Point: 360 PSI (Red)
• Max. Pressure: 4,350 PS
• Voltage: 10.1 A - 250 VAC
• Max: Fluid Temperature: 194° F
• Cable Length: 37.4”
• Thread: 1/4” Male
• Material: Brass / plastic
• Protection Class” IP 65
• Weight: 0.65 lbs

Suttner ST-601C Inline Chemical Resistant Spray Gun 4,000 PSI with Ceramic Ball. Ideal for cleaning vertical and overhead surfaces. Perfect for washing tractors, trailers, siding, windows, eaves, etc.

Features
• High Quality, German engineered components
• Superior Chemical Resistant
• Horizontal flow-through design
• Heavy duty, impact-resistant trigger guard
• Forged brass housing for maximum strength
• Unitized valve allows for higher temps and longer life
• Ceramic ball in valve is highly resistant against nearly all soaps and acids

Specifications
• Max Pressure: 4,000 PSI
• Max Flow: 12.0 GPM
• Max Temp: 300° F.
• Inlet: 3/8" Female NPT
• Outlet: 1/4" Female NPT
• Weight: 1.16 lb

Suttner #9.0 ST-160.3A Air Assisted Stainless Steel Chemical Injector with 3 Pairs of Injectors & Nozzles. Injector for large water quantities and high dosages. Chemically resistant stainless steel 1.4305 / AISI 304 with compressed air connection and wall bracket

Features
• The stainless steel injector features three pairs of injector and nozzle in one housing which can be configured independently. This enables numerous metering and foam applications
• In order to produce large foam quantities in the low-pressure range, the injector is provided with an compressed air connection
• You can inject 3 of the same or three different cleaning agents at the same time
• Maximum draw rate per line is 7 – 8%
• Total injector draw rate will be 21% – 24%
• Each injector draw barb comes with a packet of dosing nozzles if you want to meter some of or all 3 draw lines

Specifications
• Nozzle/Orifice Size: 9.0
• Flow Rate: 1 - 24 GPM
• Pressure: 90 - 5,000 PSI
• Max Temp: 194° F.
• Inlet: 1/2” Female
• Outlet: 1/2” Female
• Air Connection: 1/4” Male
• Hose Barbs: .35” ID hose
• Note: Optimum foam created 130°F or less
• Weight: 3.55 lb

Please use Nozzle Chart to determine proper nozzle size

Note: If between sizes, choose the larger nozzle size

Nozzle Chart

Suttner ST-458 # 12.0 Hydro Ex Turbo Nozzle with Red Extended Poly Cover. This 1/2” Inlet hydro excavation nozzle is rated up to 6,000 PSI.

Features
• The outlet cover extension greatly decreases the chance of dirt and debris getting to the nozzle tip and seat area
• Significant Increase in lifetime of nozzle
• Molded and wear resistant poly cover

Hydro Ex Nozzle Flyer

Specifications
• Nozzle Size # 12.0
• Max PSI: 6,000
• Max Temp.: 190° F
• Inlet: 1/2" Female NPT
• NOTE: All rotating nozzles should be started pointing downward
• Weight: 1.60 lbs

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

Suttner 240º F Temperature Gauge, Mounts to 1/4" Spray Lances

Specifications:
• Mounts easily to 1/4” spray lances
• Simple way to monitor water temperature
• Great tool for your service technician
• Note: Lance not included
• Weight: 0.37 lbs.

Suttner 240º F Temperature Gauge, Mounts to 1/2" Hydro Ex Lances

Specifications:
• Mounts easily to 1/2” hydro excavation spray lances
• Simple way to monitor water temperature
• Great tool for your service technician
• Note: Lance not included
• Weight: 0.37 lbs.

Suttner ST-83 Air Powered Disinfecting Cold Fogger. The ST-83 is perfect for fogging on sanitary solutions in restaurants, hotels, hospitals, nursing homes, public transportation, taxis, rental cars, agricultural and food processing facilities. The fine spray or fog pattern that this device produces allows sanitary solutions to reach all around the items and areas being cleaned. It also provides an effective and uniform wetting of the surface

Features
• It's easy to use. Fill the bottle with your sanitizing solution, attach to an air compressor and start fogging on the sanitizing solution
• Corrosion resistant stainless steel & plastic
• Inexpensive and safe application for hygienically germ-free cleaning of interiors to remove microorganisms, viruses and bacteria
• No inhalation of the disinfectant solution as rooms do not have to be entered
• The finest nebulization of active ingredients comes into the smallest gaps and into the last corner
• A compressed air connection is required 
• Uniform spray pattern with the finest droplets under 30 μm.
• Extremely productive use: e.g. 1 liter for rooms with 60 m3, room size of approx. 25 m2
• Easy dosing of the disinfectant by ml scale, (100 ml each.)
• Accessories available: adapter for 5 - 30 liter canister, further dosing nozzles from our range

Compressor Requirments:
• Commercially available compressed air systems or compressors can be used to supply the fog device with compressed air
• The compressor should provide a flow rate of 120 - 180 L / min.
• The working pressure should be at least 3 bar.
• If not available, we recommend installing a pressure reducer (item 150008010) between the compressor outlet and the ST-83.
• With this the operating pressure - working pressure on the ST-83 can be set exactly.
• Make sure that the cross-section of the hose from the compressor to the ST-83 is correct. The longer the hose, the larger its cross section should be. 20 meters hose length ID 8 mm / 100 meters hose length ID 10 mm

See ST-83 in action on YouTube

Agriculture, breeding and food industry

Medical practices, hospitals and nursing homes

Public transport, taxis and rental cars

Hotels and restaurants

Operation manual

Specifications
• Nozzle Inserts: 2 with different spray patterns
• Material: Stainless steel & plastic
• Air Inlet: 1/4" Female NPT
• Bottle:1 Litre
• Note: Air compressor required for operation (Not Included)
• Weight: 2.35 lb

Suttner ST-009L 47” Nickel Chrome Plated Steel 6,000 PSI Lance with Vented Grip and Nozzle Protector. Suitable when using corrosive chemical. Suttner’s most popular lances for cold or hot water applications

Features:
• High Quality, German engineered components
• Vented grip easily adjusts anywhere on lance for anyone's desired ergonomic position
• Comes with ST-004 nozzle protector
• Vented grip allows heat to dissipate providing a cooler handle
• Threads are rolled on providing consistent sealing and four times the strength than cut threads

Specifications:
• Length: 47"
• Pipe Material: Nickel chrome plated steel
• Grip: 11" Vented
• Inlet: 1/4” MNPT
• Outlet: 1/4” FNPT
• Maximum Pressure: 6,000 PSI
• Max. Temp.: 300° F
• Weight: 2.2 lbs.

Suttner ST-167 Stainless Steel Chemical Bypass Injector, #5.5, 5000 Psi, 3/8" F x 3/8” F

Field of Application
• The injectors completely made out of stainless steel make it possible to open two cross section areas (50 mm2 each) in order to guarantee a smooth use without drop in pressure when washing/rinsing
• This ensures that the injector can be permanently kept in the high pressure line, also at the time when large water quantities are used e.g. in the agriculture or food industry
• The cleaning capacity when cleaning and rinsing is not affected at all.
• A lever makes it possible to change from the cleaning and rinsing mode into injector operation
• When using the cleaning mode, there are two bore holes guiding the high pressure water parallel to the injector (bypass mode)
• When using the injector the available water quantity is guided through the injection area

Features
• Integrated lever that allows you to go from disinfectant to foam to rinse
• Food grade quality and specifications
• Durable Stainless steel construction
• 10 Dosing nozzles included
• Use 0.35 ID hose

Specifications
• Nozzle/Orifice Size: 5.5
• Max Flow Rate:18 GPM
• Min Flow Rate: 1 GPM
• Max Pressure: 5,000 PSI
• Min Pressure: 1,000 PSI
• Max Temp: 212° F.( Optimum foam created 130°F or less)
• Inlet: 3/8” Female
• Outlet: 3/8” Female
• Hose Barbs: .35” ID hose
• See the ST-167 System Diagram (3rd Picture)
• Weight: 2.38 lb

Please use Nozzle Chart to determine proper nozzle size

Note: If between sizes, choose the larger nozzle size

Nozzle Chart

Suttner ST-75.2 Long Range Foam Nozzle 5,000 PSI with #15 Air Injector Nozzle and 1/4" FPT Inlet. The ST-75 Long Rang foam nozzle throw foam up to 40 feet

Features
• By means of the foam head ST-75.2 different foam applications are possible as the air injector nozzle is easily exchangeable and adaptable
• The maximum flow is dependent on the chosen nozzle size
• 1/4” Stainless steel inlet

ST-75 Long Range Foamer with ST-160 Chemical Injector on YouTube

Specifications
• Air Injector Nozzle Size: 15
• Max Pressure: 5,000 PSI
• Flow Rate: up to 7 GPM
• Inlet: 1/4" FPT
• Note: Suttner ST-160, ST-160M or St-164 Chemical or Foam injector required and is not included
• Weight: 0.75 lb

Please use Nozzle Chart to determine proper Spray Nozzle Size

Nozzle Chart

Use Spray Nozzle Size and Foam Nozzle Chart to determine correct Foam Nozzle to use

Foam Nozzle Chart

Suttner ST-166 Stainless Steel Dual Chemical Injector w/18 Metering / Dosing Nozzles, #11.0, 5000 PSI, 3/8" F x 3/8” M

Features
• Food grade quality and specifications
• Durable Stainless Steel housing
• 18 Metering / dosing nozzles included (See 3rd picture)
• Uses .35" I.D. Hose

Specifications
• Nozzle/Orifice Size: 11.0
• Max Flow Rate: 18 GPM
• Min Flow Rate: 1 GPM
• Max Pressure: 5,000 PSI
• Min Pressure: 1,000 PSI
• Max Temp: 194° F.
• Inlet: 3/8” Female
• Outlet: 3/8” Male
• Hose Barbs (2): .35” ID hose
• Weight: 0.75 lb

Please use Nozzle Chart to determine proper nozzle size

Note: If between sizes, choose the larger nozzle size

Nozzle Chart

See the ST-166 System Diagram below to determine the foam components needed

ST-166 System Diagram

Suttner ST-167 Stainless Steel Chemical Bypass Injector, #6.0, 5000 Psi, 3/8" F x 3/8” F

Field of Application
• The injectors completely made out of stainless steel make it possible to open two cross section areas (50 mm2 each) in order to guarantee a smooth use without drop in pressure when washing/rinsing
• This ensures that the injector can be permanently kept in the high pressure line, also at the time when large water quantities are used e.g. in the agriculture or food industry
• The cleaning capacity when cleaning and rinsing is not affected at all.
• A lever makes it possible to change from the cleaning and rinsing mode into injector operation
• When using the cleaning mode, there are two bore holes guiding the high pressure water parallel to the injector (bypass mode)
• When using the injector the available water quantity is guided through the injection area

Features
• Integrated lever that allows you to go from disinfectant to foam to rinse
• Food grade quality and specifications
• Durable Stainless steel construction
• 10 Dosing nozzles included
• Use 0.35 ID hose

Specifications
• Nozzle/Orifice Size: 6.0
• Max Flow Rate:18 GPM
• Min Flow Rate: 1 GPM
• Max Pressure: 5,000 PSI
• Min Pressure: 1,000 PSI
• Max Temp: 212° F.( Optimum foam created 130°F or less)
• Inlet: 3/8” Female
• Outlet: 3/8” Female
• Hose Barbs: .35” ID hose
• See the ST-167 System Diagram (3rd Picture)
• Weight: 2.38 lb

Please use Nozzle Chart to determine proper nozzle size

Note: If between sizes, choose the larger nozzle size

Nozzle Chart

Suttner ST-167 Stainless Steel Chemical Bypass Injector, #8.0, 5000 Psi, 3/8" F x 3/8” F

Field of Application
• The injectors completely made out of stainless steel make it possible to open two cross section areas (50 mm2 each) in order to guarantee a smooth use without drop in pressure when washing/rinsing
• This ensures that the injector can be permanently kept in the high pressure line, also at the time when large water quantities are used e.g. in the agriculture or food industry
• The cleaning capacity when cleaning and rinsing is not affected at all.
• A lever makes it possible to change from the cleaning and rinsing mode into injector operation
• When using the cleaning mode, there are two bore holes guiding the high pressure water parallel to the injector (bypass mode)
• When using the injector the available water quantity is guided through the injection area

Features
• Integrated lever that allows you to go from disinfectant to foam to rinse
• Food grade quality and specifications
• Durable Stainless steel construction
• 10 Dosing nozzles included
• Use 0.35 ID hose

Specifications
• Nozzle/Orifice Size: 8.0
• Max Flow Rate:18 GPM
• Min Flow Rate: 1 GPM
• Max Pressure: 5,000 PSI
• Min Pressure: 1,000 PSI
• Max Temp: 212° F.( Optimum foam created 130°F or less)
• Inlet: 3/8” Female
• Outlet: 3/8” Female
• Hose Barbs: .35” ID hose
• See the ST-167 System Diagram (3rd Picture)
• Weight: 2.38 lb

Please use Nozzle Chart to determine proper nozzle size

Note: If between sizes, choose the larger nozzle size

Nozzle Chart

Suttner ST-167 Stainless Steel Chemical Bypass Injector, #10.0, 5000 Psi, 3/8" F x 3/8” F

Field of Application
• The injectors completely made out of stainless steel make it possible to open two cross section areas (50 mm2 each) in order to guarantee a smooth use without drop in pressure when washing/rinsing
• This ensures that the injector can be permanently kept in the high pressure line, also at the time when large water quantities are used e.g. in the agriculture or food industry
• The cleaning capacity when cleaning and rinsing is not affected at all.
• A lever makes it possible to change from the cleaning and rinsing mode into injector operation
• When using the cleaning mode, there are two bore holes guiding the high pressure water parallel to the injector (bypass mode)
• When using the injector the available water quantity is guided through the injection area

Features
• Integrated lever that allows you to go from disinfectant to foam to rinse
• Food grade quality and specifications
• Durable Stainless steel construction
• 10 Dosing nozzles included
• Use 0.35 ID hose

Specifications
• Nozzle/Orifice Size: 10.0
• Max Flow Rate:18 GPM
• Min Flow Rate: 1 GPM
• Max Pressure: 5,000 PSI
• Min Pressure: 1,000 PSI
• Max Temp: 212° F.( Optimum foam created 130°F or less)
• Inlet: 3/8” Female
• Outlet: 3/8” Female
• Hose Barbs: .35” ID hose
• See the ST-167 System Diagram (3rd Picture)
• Weight: 2.38 lb

Please use Nozzle Chart to determine proper nozzle size

Note: If between sizes, choose the larger nozzle size

Nozzle Chart

Suttner ST-167 Stainless Steel Chemical Bypass Injector, #12.0, 5000 Psi, 3/8" F x 3/8” F

Field of Application
• The injectors completely made out of stainless steel make it possible to open two cross section areas (50 mm2 each) in order to guarantee a smooth use without drop in pressure when washing/rinsing
• This ensures that the injector can be permanently kept in the high pressure line, also at the time when large water quantities are used e.g. in the agriculture or food industry
• The cleaning capacity when cleaning and rinsing is not affected at all.
• A lever makes it possible to change from the cleaning and rinsing mode into injector operation
• When using the cleaning mode, there are two bore holes guiding the high pressure water parallel to the injector (bypass mode)
• When using the injector the available water quantity is guided through the injection area

Features
• Integrated lever that allows you to go from disinfectant to foam to rinse
• Food grade quality and specifications
• Durable Stainless steel construction
• 10 Dosing nozzles included
• Use 0.35 ID hose

Specifications
• Nozzle/Orifice Size: 12.0
• Max Flow Rate:18 GPM
• Min Flow Rate: 1 GPM
• Max Pressure: 5,000 PSI
• Min Pressure: 1,000 PSI
• Max Temp: 212° F.( Optimum foam created 130°F or less)
• Inlet: 3/8” Female
• Outlet: 3/8” Female
• Hose Barbs: .35” ID hose
• See the ST-167 System Diagram (3rd Picture)
• Weight: 2.38 lb

Please use Nozzle Chart to determine proper nozzle size

Note: If between sizes, choose the larger nozzle size

Nozzle Chart