Suttner America

Suttner 1/2'' MNPT Adapter Kit for ST-8

Suttner ST-10 & ST-11 Polypropylene 1.8 Gallon Float Tank & Lid. Complete float tank & lid used in regulating a constant flow of water to the pressure washer

Features:
• 100% polypropylene, wont rust
• Mount ST-8 float valve anywhere needed

Specifications:
• Capacity: 1.8 Gallons
• Dimensions: 13 3/4” L x 5 1/2” W x 6 3/4” H
• Weight 1.38 lbs

 

Suttner ST-73.2 Foamer with 32 oz. Bottle, Stainless Steel Integrated Injector, 1/4" F Inlet. Convenient and portable for more effective foam cleaning for Industry, Agriculture, Automotive/Fleet and Institutional applications! By turning an adjustable grip handle the concentration of foaming agent in the water can be adjusted. Our latest innovation realizes an ideal mixing of air and cleaning agent, thus succeeding an ideal foam result

Features
• 5 Position metering valve for chemical draw
• Sometimes, less is more! This version of our foam injector lance is equipped with a mesh strainer instead of a foam pad. Not being equipped with a foam pad contributes to the fact that blockages can be almost ruled out
• Adjustable nozzle - with a simple twist you can change from a horizontal spray to a vertical spray
• A completely stainless steel and non-corrosive injector unit
• The highest grade of chemical resistance
• Easy to fill wide mouth bottle with fill markings
• Integrated injector (no additional injector required)

Concentration Rates
• Setting 1: 2 - 2.5%
• Setting 2: 4 - 4.5%
• Setting 3: 5 - 5.5%
• Setting 4: 6.5 - 7%
• Setting 5: 7.5 - 8%

 

See ST-73.2 in action on YouTube

Specifications
• Pressure: 1,000 - 4,350 PSI
• Flow Rate: 1.32 – 5.2 GPM
• Max Temp: 100° F.
• Inlet: 1/4" Female
• Bottle: 32 oz
• Weight: 1.10 lb

 

Suttner ST-73.2 Foamer with 64 oz. Bottle, Stainless Steel Integrated Injector, 1/4" F Inlet. Convenient and portable for more effective foam cleaning for Industry, Agriculture, Automotive/Fleet and Institutional applications! By turning an adjustable grip handle the concentration of foaming agent in the water can be adjusted. Our latest innovation realizes an ideal mixing of air and cleaning agent, thus succeeding an ideal foam result

Features
• 5 Position metering valve for chemical draw
• Sometimes, less is more! This version of our foam injector lance is equipped with a mesh strainer instead of a foam pad. Not being equipped with a foam pad contributes to the fact that blockages can be almost ruled out
• Adjustable nozzle - with a simple twist you can change from a horizontal spray to a vertical spray
• A completely stainless steel and non-corrosive injector unit
• The highest grade of chemical resistance
• Easy to fill wide mouth bottle with fill markings
• Integrated injector (no additional injector required)

Concentration Rates
• Setting 1: 2 - 2.5%
• Setting 2: 4 - 4.5%
• Setting 3: 5 - 5.5%
• Setting 4: 6.5 - 7%
• Setting 5: 7.5 - 8%

 

See ST-73.2 in action on YouTube

See ST-73 in action on YouTube

Specifications
• Pressure: 1,000 - 4,350 PSI
• Flow Rate: 1.32 – 5.2 GPM
• Max Temp: 100° F.
• Inlet: 1/4" Female
• Bottle: 64 oz
• Weight: 1.20 lb

1/4” F Suttner #6.5 ST-49 Turbo Nozzle Driver With 6 Rear jet inserts and rated to 5,076 PSI

Features:
• High Quality, German engineered components
• Turbo nozzle driver and ST-356 or ST-456 turbo nozzle are the perfect combination for drilling through blockages with its rotary forward facing jet
• Driven up to the blockage by 6 powerful rear facing hardened stainless steel nozzles the high speed forward facing spinning jet creates a cone shape that has enough cutting force to blast through roots and scale
• It is also ideal for cutting up and shredding tissue and fat deposits

Note:
• Above shown item (1st Picture) is for the driver portion only
• You will have to add the corresponding ST-357 or ST-456 turbo nozzle to complete the driver (2nd Picture)

Specifications:
• Material: Hardened stainless steel
• Maximum Pressure: 5,076 PSI
• Inlet (Sewer Hose): 1/4” Female
• Outlet (Turbo Nozzle): 1/4” Male
• Nozzle Size: # 6.5 (With a #3.0 ST-357 or ST-456 nozzle)
• Note: Requires #3.0 ST-357 or ST-456 1/4” turbo nozzle (Not Included)
• Weight: 0.20 lbs

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

1/4” F Suttner #8.0 ST-49 Turbo Nozzle Driver With 4 Rear jet inserts and rated to 5,076 PSI

Features:
• High Quality, German engineered components
• Turbo nozzle driver and ST-356 or ST-456 turbo nozzle are the perfect combination for drilling through blockages with its rotary forward facing jet
• Driven up to the blockage by 4 powerful rear facing hardened stainless steel nozzles the high speed forward facing spinning jet creates a cone shape that has enough cutting force to blast through roots and scale
• It is also ideal for cutting up and shredding tissue and fat deposits

Note:
• Above shown item (1st Picture) is for the driver portion only
• You will have to add the corresponding ST-357 or ST-456 turbo nozzle to complete the driver (2nd Picture)

Specifications:
• Material: Hardened stainless steel
• Maximum Pressure: 5,076 PSI
• Inlet (Sewer Hose): 1/4” Female
• Outlet (Turbo Nozzle): 1/4” Male
• Nozzle Size: # 8.0 (With a #3.0 ST-357 or ST-456 nozzle)
• Note: Requires #3.0 ST-357 or ST-456 1/4” turbo nozzle (Not Included)
• Weight: 0.20 lbs

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

3/8” F Suttner #6.5 ST-49 Turbo Nozzle Driver With 6 Rear jet inserts and rated to 5,076 PSI

Features:
• High Quality, German engineered components
• Turbo nozzle driver and ST-356 or ST-456 turbo nozzle are the perfect combination for drilling through blockages with its rotary forward facing jet
• Driven up to the blockage by 6 powerful rear facing hardened stainless steel nozzles the high speed forward facing spinning jet creates a cone shape that has enough cutting force to blast through roots and scale
• It is also ideal for cutting up and shredding tissue and fat deposits

Note:
• Above shown item (1st Picture) is for the driver portion only
• You will have to add the corresponding ST-357 or ST-456 turbo nozzle to complete the driver (2nd Picture)

Specifications:
• Material: Hardened stainless steel
• Maximum Pressure: 5,076 PSI
• Inlet (Sewer Hose): 3/8” Female
• Outlet (Turbo Nozzle): 1/4” Male
• Nozzle Size: # 6.5 (With a #3.0 ST-357 or ST-456 nozzle)
• Note: Requires #3.0 ST-357 or ST-456 1/4” turbo nozzle (Not Included)
• Weight: 0.20 lbs

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

3/8” F Suttner #8.0 ST-49 Turbo Nozzle Driver With 6 Rear jet inserts and rated to 5,076 PSI

Features:
• High Quality, German engineered components
• Turbo nozzle driver and ST-356 or ST-456 turbo nozzle are the perfect combination for drilling through blockages with its rotary forward facing jet
• Driven up to the blockage by 6 powerful rear facing hardened stainless steel nozzles the high speed forward facing spinning jet creates a cone shape that has enough cutting force to blast through roots and scale
• It is also ideal for cutting up and shredding tissue and fat deposits

Note:
• Above shown item (1st Picture) is for the driver portion only
• You will have to add the corresponding ST-357 or ST-456 turbo nozzle to complete the driver (2nd Picture)

Specifications:
• Material: Hardened stainless steel
• Maximum Pressure: 5,076 PSI
• Inlet (Sewer Hose): 3/8” Female
• Outlet (Turbo Nozzle): 1/4” Male
• Nozzle Size: # 8.0 (With a #3.0 ST-357 or ST-456 nozzle)
• Note: Requires #3.0 ST-357 or ST-456 1/4” turbo nozzle (Not Included)
• Weight: 0.20 lbs

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

1/2” F Suttner #10.0 ST-49 Turbo Nozzle Driver With 6 Rear jet inserts and rated to 7,252 PSI

Features:
• High Quality, German engineered components
• Turbo nozzle driver and ST-457 or ST-559 turbo nozzle are the perfect combination for drilling through blockages with its rotary forward facing jet
• Driven up to the blockage by 6 powerful rear facing hardened stainless steel nozzles the high speed forward facing spinning jet creates a cone shape that has enough cutting force to blast through roots and scale
• It is also ideal for cutting up and shredding tissue and fat deposits

Note:
• Above shown item (1st Picture) is for the driver portion only
• You will have to add the corresponding ST-457 or ST-559 turbo nozzle to complete the driver (2nd Picture)

Specifications:
• Material: Hardened stainless steel
• Maximum Pressure: 7,252 PSI
• Inlet (Sewer Hose): 1/2” Female
• Outlet (Turbo Nozzle): 1/4” Male
• Nozzle Size: # 10.0 (With a #3.0 ST-457 or ST-559 nozzle)
• Note: Requires #3.0 ST-457 or ST-559 1/4” turbo nozzle (Not Included)
• Weight: 0.30 lbs

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

1/2” F Suttner #15.0 ST-49 Turbo Nozzle Driver With 6 Rear jet inserts and rated to 7,252 PSI

Features:
• High Quality, German engineered components
• Turbo nozzle driver and ST-457 or ST-559 turbo nozzle are the perfect combination for drilling through blockages with its rotary forward facing jet
• Driven up to the blockage by 6 powerful rear facing hardened stainless steel nozzles the high speed forward facing spinning jet creates a cone shape that has enough cutting force to blast through roots and scale
• It is also ideal for cutting up and shredding tissue and fat deposits

Note:
• Above shown item (1st Picture) is for the driver portion only
• You will have to add the corresponding ST-457 or ST-559 turbo nozzle to complete the driver (2nd Picture)

Specifications:
• Material: Hardened stainless steel
• Maximum Pressure: 7,252 PSI
• Inlet (Sewer Hose): 1/2” Female
• Outlet (Turbo Nozzle): 1/4” Male
• Nozzle Size: # 15.0 (With a #4.5 ST-457 or #5.0 ST-559 nozzle)
• Note: Requires #4.5 ST-457 or #5.0 ST-559 1/4” turbo nozzle (Not Included)
• Weight: 0.30 lbs

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

1/2” F Suttner #20.0 ST-49 Turbo Nozzle Driver With 6 Rear jet inserts and rated to 7,252 PSI

Features:
• High Quality, German engineered components
• Turbo nozzle driver and ST-457 turbo nozzle are the perfect combination for drilling through blockages with its rotary forward facing jet
• Driven up to the blockage by 6 powerful rear facing hardened stainless steel nozzles the high speed forward facing spinning jet creates a cone shape that has enough cutting force to blast through roots and scale
• It is also ideal for cutting up and shredding tissue and fat deposits

Note:
• Above shown item (1st Picture) is for the driver portion only
• You will have to add the corresponding ST-457 turbo nozzle to complete the driver (2nd Picture)

Specifications:
• Material: Hardened stainless steel
• Maximum Pressure: 7,252 PSI
• Inlet (Sewer Hose): 1/2” Female
• Outlet (Turbo Nozzle): 1/4” Male
• Nozzle Size: # 20.0 (With a #8.0 ST-457 nozzle)
• Note: Requires #8.0 ST-457 1/4” turbo nozzle (Not Included)
• Weight: 0.30 lbs

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

Suttner ST-164 Stainless Steel Chemical Bypass Injector, #12.0, 5000 Psi, 3/8" F x 1/2” F

Field of Application
• Designed for the cleaning of vehicles carrying cattle, food, frozen foods and fish in order to avoid bacterial spread. Also suitable for cleaning milking parlours and applicable in cattle bredding, piggery, poultry farming and in the pisciculture
• The foam device is a combination made out of stainless steel and special high performance plastics. The addition of one out of two connected chemicals is determined by positioning the lever. All versions are suitable for the addition in low pressure from approx. 43 PSI up to max. 5,076 PSI
• When being operated in rinsing function up to 15.85 GPM pass through the unit without any drop in pressure
• Locks in position for accurate metering
• In combination with a foam lance (ST-72 or ST-75), an adjustable or a triple nozzle the ST-164 injector can suck in chemicals by means of the integrated check valve made out of stainless steel and spray them on or foam them depending on the chosen nozzle
• The ST-164 injector is available in the nozzle size of 3.5 – 11.0
• The dosing is adjusted by one of the 18 nozzle inserts which are included in the consignment. The connection for chemicals is equipped with an integrated check valve

Features
• Integrated lever that allows you to go from disinfectant to foam to rinse
• Food grade quality and specifications
• Durable Stainless steel construction
• 18 Dosing nozzles included
• Use 0.35 ID hose

Specifications
• Nozzle/Orifice Size: 12.0
• Max Flow Rate: 21 GPM
• Min Flow Rate: 1 GPM
• Max Pressure: 5,000 PSI
• Min Pressure: 1,200 PSI
• Max Temp: 212° F.
• Inlet: 3/8” Female
• Outlet: 1/2” Female
• Hose Barbs: .35” ID hose
• Weight: 4.80 lb

Please use Nozzle Chart to determine proper nozzle size

Note: If between sizes, choose the larger nozzle size

Nozzle Chart

 

See the ST-164 System Diagram below to determine the foam components needed

ST-164 System Diagram

 

Suttner ST-164 Stainless Steel Chemical Bypass Injector, #9.0, 5000 Psi, 3/8" F x 1/2” F

Field of Application
• Designed for the cleaning of vehicles carrying cattle, food, frozen foods and fish in order to avoid bacterial spread. Also suitable for cleaning milking parlours and applicable in cattle bredding, piggery, poultry farming and in the pisciculture
• The foam device is a combination made out of stainless steel and special high performance plastics. The addition of one out of two connected chemicals is determined by positioning the lever. All versions are suitable for the addition in low pressure from approx. 43 PSI up to max. 5,076 PSI
• When being operated in rinsing function up to 15.85 GPM pass through the unit without any drop in pressure
• Locks in position for accurate metering
• In combination with a foam lance (ST-72 or ST-75), an adjustable or a triple nozzle the ST-164 injector can suck in chemicals by means of the integrated check valve made out of stainless steel and spray them on or foam them depending on the chosen nozzle
• The ST-164 injector is available in the nozzle size of 3.5 – 11.0
• The dosing is adjusted by one of the 18 nozzle inserts which are included in the consignment. The connection for chemicals is equipped with an integrated check valve

Features
• Integrated lever that allows you to go from disinfectant to foam to rinse
• Food grade quality and specifications
• Durable Stainless steel construction
• 18 Dosing nozzles included
• Use 0.35 ID hose

Specifications
• Nozzle/Orifice Size: 9.0
• Max Flow Rate: 21 GPM
• Min Flow Rate: 1 GPM
• Max Pressure: 5,000 PSI
• Min Pressure: 1,200 PSI
• Max Temp: 212° F.
• Inlet: 3/8” Female
• Outlet: 1/2” Female
• Hose Barbs: .35” ID hose
• Weight: 4.80 lb

Please use Nozzle Chart to determine proper nozzle size

Note: If between sizes, choose the larger nozzle size

Nozzle Chart

 

See the ST-164 System Diagram below to determine the foam components needed

ST-164 System Diagram

 

Suttner ST-164 Stainless Steel Chemical Bypass Injector, #10.0, 5000 Psi, 3/8" F x 1/2” F

Field of Application
• Designed for the cleaning of vehicles carrying cattle, food, frozen foods and fish in order to avoid bacterial spread. Also suitable for cleaning milking parlours and applicable in cattle bredding, piggery, poultry farming and in the pisciculture
• The foam device is a combination made out of stainless steel and special high performance plastics. The addition of one out of two connected chemicals is determined by positioning the lever. All versions are suitable for the addition in low pressure from approx. 43 PSI up to max. 5,076 PSI
• When being operated in rinsing function up to 15.85 GPM pass through the unit without any drop in pressure
• Locks in position for accurate metering
• In combination with a foam lance (ST-72 or ST-75), an adjustable or a triple nozzle the ST-164 injector can suck in chemicals by means of the integrated check valve made out of stainless steel and spray them on or foam them depending on the chosen nozzle
• The ST-164 injector is available in the nozzle size of 3.5 – 11.0
• The dosing is adjusted by one of the 18 nozzle inserts which are included in the consignment. The connection for chemicals is equipped with an integrated check valve

Features
• Integrated lever that allows you to go from disinfectant to foam to rinse
• Food grade quality and specifications
• Durable Stainless steel construction
• 18 Dosing nozzles included
• Use 0.35 ID hose

Specifications
• Nozzle/Orifice Size: 10.0
• Max Flow Rate: 21 GPM
• Min Flow Rate: 1 GPM
• Max Pressure: 5,000 PSI
• Min Pressure: 1,200 PSI
• Max Temp: 212° F.
• Inlet: 3/8” Female
• Outlet: 1/2” Female
• Hose Barbs: .35” ID hose
• Weight: 4.80 lb

Please use Nozzle Chart to determine proper nozzle size

Note: If between sizes, choose the larger nozzle size

Nozzle Chart

 

See the ST-164 System Diagram below to determine the foam components needed

ST-164 System Diagram

 

Suttner ST-164 Stainless Steel Chemical Bypass Injector, #11.0, 5000 Psi, 3/8" F x 1/2” F

Field of Application
• Designed for the cleaning of vehicles carrying cattle, food, frozen foods and fish in order to avoid bacterial spread. Also suitable for cleaning milking parlours and applicable in cattle bredding, piggery, poultry farming and in the pisciculture
• The foam device is a combination made out of stainless steel and special high performance plastics. The addition of one out of two connected chemicals is determined by positioning the lever. All versions are suitable for the addition in low pressure from approx. 43 PSI up to max. 5,076 PSI
• When being operated in rinsing function up to 15.85 GPM pass through the unit without any drop in pressure
• Locks in position for accurate metering
• In combination with a foam lance (ST-72 or ST-75), an adjustable or a triple nozzle the ST-164 injector can suck in chemicals by means of the integrated check valve made out of stainless steel and spray them on or foam them depending on the chosen nozzle
• The ST-164 injector is available in the nozzle size of 3.5 – 11.0
• The dosing is adjusted by one of the 18 nozzle inserts which are included in the consignment. The connection for chemicals is equipped with an integrated check valve

Features
• Integrated lever that allows you to go from disinfectant to foam to rinse
• Food grade quality and specifications
• Durable Stainless steel construction
• 18 Dosing nozzles included
• Use 0.35 ID hose

Specifications
• Nozzle/Orifice Size: 11.0
• Max Flow Rate: 21 GPM
• Min Flow Rate: 1 GPM
• Max Pressure: 5,000 PSI
• Min Pressure: 1,200 PSI
• Max Temp: 212° F.
• Inlet: 3/8” Female
• Outlet: 1/2” Female
• Hose Barbs: .35” ID hose
• Weight: 4.80 lb

Please use Nozzle Chart to determine proper nozzle size

Note: If between sizes, choose the larger nozzle size

Nozzle Chart

 

See the ST-164 System Diagram below to determine the foam components needed

ST-164 System Diagram

 

Suttner ST-164 Stainless Steel Chemical Bypass Injector, #5.5, 5000 Psi, 3/8" F x 1/2” F

Field of Application
• Designed for the cleaning of vehicles carrying cattle, food, frozen foods and fish in order to avoid bacterial spread. Also suitable for cleaning milking parlours and applicable in cattle bredding, piggery, poultry farming and in the pisciculture
• The foam device is a combination made out of stainless steel and special high performance plastics. The addition of one out of two connected chemicals is determined by positioning the lever. All versions are suitable for the addition in low pressure from approx. 43 PSI up to max. 5,076 PSI
• When being operated in rinsing function up to 15.85 GPM pass through the unit without any drop in pressure
• Locks in position for accurate metering
• In combination with a foam lance (ST-72 or ST-75), an adjustable or a triple nozzle the ST-164 injector can suck in chemicals by means of the integrated check valve made out of stainless steel and spray them on or foam them depending on the chosen nozzle
• The ST-164 injector is available in the nozzle size of 3.5 – 11.0
• The dosing is adjusted by one of the 18 nozzle inserts which are included in the consignment. The connection for chemicals is equipped with an integrated check valve

Features
• Integrated lever that allows you to go from disinfectant to foam to rinse
• Food grade quality and specifications
• Durable Stainless steel construction
• 18 Dosing nozzles included
• Use 0.35 ID hose

Specifications
• Nozzle/Orifice Size: 5.5
• Max Flow Rate: 21 GPM
• Min Flow Rate: 1 GPM
• Max Pressure: 5,000 PSI
• Min Pressure: 1,200 PSI
• Max Temp: 212° F.
• Inlet: 3/8” Female
• Outlet: 1/2” Female
• Hose Barbs: .35” ID hose
• Weight: 4.80 lb

Please use Nozzle Chart to determine proper nozzle size

Note: If between sizes, choose the larger nozzle size

Nozzle Chart

 

See the ST-164 System Diagram below to determine the foam components needed

ST-164 System Diagram

Suttner ST-164 Stainless Steel Chemical Bypass Injector, #6.0, 5000 Psi, 3/8" F x 1/2” F

Field of Application
• Designed for the cleaning of vehicles carrying cattle, food, frozen foods and fish in order to avoid bacterial spread. Also suitable for cleaning milking parlours and applicable in cattle bredding, piggery, poultry farming and in the pisciculture
• The foam device is a combination made out of stainless steel and special high performance plastics. The addition of one out of two connected chemicals is determined by positioning the lever. All versions are suitable for the addition in low pressure from approx. 43 PSI up to max. 5,076 PSI
• When being operated in rinsing function up to 15.85 GPM pass through the unit without any drop in pressure
• Locks in position for accurate metering
• In combination with a foam lance (ST-72 or ST-75), an adjustable or a triple nozzle the ST-164 injector can suck in chemicals by means of the integrated check valve made out of stainless steel and spray them on or foam them depending on the chosen nozzle
• The ST-164 injector is available in the nozzle size of 3.5 – 11.0
• The dosing is adjusted by one of the 18 nozzle inserts which are included in the consignment. The connection for chemicals is equipped with an integrated check valve

Features
• Integrated lever that allows you to go from disinfectant to foam to rinse
• Food grade quality and specifications
• Durable Stainless steel construction
• 18 Dosing nozzles included
• Use 0.35 ID hose

Specifications
• Nozzle/Orifice Size: 7.0
• Max Flow Rate: 21 GPM
• Min Flow Rate: 1 GPM
• Max Pressure: 5,000 PSI
• Min Pressure: 1,200 PSI
• Max Temp: 212° F.
• Inlet: 3/8” Female
• Outlet: 1/2” Female
• Hose Barbs: .35” ID hose
• Weight: 4.80 lb

Please use Nozzle Chart to determine proper nozzle size

Note: If between sizes, choose the larger nozzle size

Nozzle Chart

 

See the ST-164 System Diagram below to determine the foam components needed

ST-164 System Diagram

Suttner ST-164 Stainless Steel Chemical Bypass Injector, #7.0, 5000 Psi, 3/8" F x 1/2” F

Field of Application
• Designed for the cleaning of vehicles carrying cattle, food, frozen foods and fish in order to avoid bacterial spread. Also suitable for cleaning milking parlours and applicable in cattle bredding, piggery, poultry farming and in the pisciculture
• The foam device is a combination made out of stainless steel and special high performance plastics. The addition of one out of two connected chemicals is determined by positioning the lever. All versions are suitable for the addition in low pressure from approx. 43 PSI up to max. 5,076 PSI
• When being operated in rinsing function up to 15.85 GPM pass through the unit without any drop in pressure
• Locks in position for accurate metering
• In combination with a foam lance (ST-72 or ST-75), an adjustable or a triple nozzle the ST-164 injector can suck in chemicals by means of the integrated check valve made out of stainless steel and spray them on or foam them depending on the chosen nozzle
• The ST-164 injector is available in the nozzle size of 3.5 – 11.0
• The dosing is adjusted by one of the 18 nozzle inserts which are included in the consignment. The connection for chemicals is equipped with an integrated check valve

Features
• Integrated lever that allows you to go from disinfectant to foam to rinse
• Food grade quality and specifications
• Durable Stainless steel construction
• 18 Dosing nozzles included
• Use 0.35 ID hose

Specifications
• Nozzle/Orifice Size: 7.0
• Max Flow Rate: 21 GPM
• Min Flow Rate: 1 GPM
• Max Pressure: 5,000 PSI
• Min Pressure: 1,200 PSI
• Max Temp: 212° F.
• Inlet: 3/8” Female
• Outlet: 1/2” Female
• Hose Barbs: .35” ID hose
• Weight: 4.80 lb

Please use Nozzle Chart to determine proper nozzle size

Note: If between sizes, choose the larger nozzle size

Nozzle Chart

 

See the ST-164 System Diagram below to determine the foam components needed

ST-164 System Diagram

 

special high performance plastics. The addition of one out of two connected chemicals is determined by positioning the lever. All versions are suitable for the addition in low pressure from approx. 43 PSI up to max. 5,076 PSI
• When being operated in rinsing function up to 15.85 GPM pass through the unit without any drop in pressure
• Locks in position for accurate metering
• In combination with a foam lance (ST-72 or ST-75), an adjustable or a triple nozzle the ST-164 injector can suck in chemicals by means of the integrated check valve made out of stainless steel and spray them on or foam them depending on the chosen nozzle
• The ST-164 injector is available in the nozzle size of 3.5 – 11.0
• The dosing is adjusted by one of the 18 nozzle inserts which are included in the consignment. The connection for chemicals is equipped with an integrated check valve

Features
• Integrated lever that allows you to go from disinfectant to foam to rinse
• Food grade quality and specifications
• Durable Stainless steel construction
• 18 Dosing nozzles included
• Use 0.35 ID hose

Specifications
• Nozzle/Orifice Size: 8.0
• Max Flow Rate: 21 GPM
• Min Flow Rate: 1 GPM
• Max Pressure: 5,000 PSI
• Min Pressure: 1,200 PSI
• Max Temp: 212° F.
• Inlet: 3/8” Female
• Outlet: 1/2” Female
• Hose Barbs: .35” ID hose
• Weight: 4.80 lb

Please use Nozzle Chart to determine proper nozzle size

Note: If between sizes, choose the larger nozzle size

Nozzle Chart

 

See the ST-164 System Diagram below to determine the foam components needed

ST-164 System Diagram

 

Suttner ST-164 Stainless Steel Chemical Bypass Injector, #8.0, 5000 Psi, 3/8" F x 1/2” F

Field of Application
• Designed for the cleaning of vehicles carrying cattle, food, frozen foods and fish in order to avoid bacterial spread. Also suitable for cleaning milking parlours and applicable in cattle bredding, piggery, poultry farming and in the pisciculture
• The foam device is a combination made out of stainless steel and special high performance plastics. The addition of one out of two connected chemicals is determined by positioning the lever. All versions are suitable for the addition in low pressure from approx. 43 PSI up to max. 5,076 PSI
• When being operated in rinsing function up to 15.85 GPM pass through the unit without any drop in pressure
• Locks in position for accurate metering
• In combination with a foam lance (ST-72 or ST-75), an adjustable or a triple nozzle the ST-164 injector can suck in chemicals by means of the integrated check valve made out of stainless steel and spray them on or foam them depending on the chosen nozzle
• The ST-164 injector is available in the nozzle size of 3.5 – 11.0
• The dosing is adjusted by one of the 18 nozzle inserts which are included in the consignment. The connection for chemicals is equipped with an integrated check valve

Features
• Integrated lever that allows you to go from disinfectant to foam to rinse
• Food grade quality and specifications
• Durable Stainless steel construction
• 18 Dosing nozzles included
• Use 0.35 ID hose

Specifications
• Nozzle/Orifice Size: 8.0
• Max Flow Rate: 21 GPM
• Min Flow Rate: 1 GPM
• Max Pressure: 5,000 PSI
• Min Pressure: 1,200 PSI
• Max Temp: 212° F.
• Inlet: 3/8” Female
• Outlet: 1/2” Female
• Hose Barbs: .35” ID hose
• Weight: 4.80 lb

Please use Nozzle Chart to determine proper nozzle size

Note: If between sizes, choose the larger nozzle size

Nozzle Chart

 

See the ST-164 System Diagram below to determine the foam components needed

ST-164 System Diagram

 

Suttner ST-164 Stainless Steel Chemical Bypass Injector, #4.5, 5000 Psi, 3/8" F x 1/2” F

Field of Application
• Designed for the cleaning of vehicles carrying cattle, food, frozen foods and fish in order to avoid bacterial spread. Also suitable for cleaning milking parlours and applicable in cattle bredding, piggery, poultry farming and in the pisciculture
• The foam device is a combination made out of stainless steel and special high performance plastics. The addition of one out of two connected chemicals is determined by positioning the lever. All versions are suitable for the addition in low pressure from approx. 43 PSI up to max. 5,076 PSI
• When being operated in rinsing function up to 15.85 GPM pass through the unit without any drop in pressure
• Locks in position for accurate metering
• In combination with a foam lance (ST-72 or ST-75), an adjustable or a triple nozzle the ST-164 injector can suck in chemicals by means of the integrated check valve made out of stainless steel and spray them on or foam them depending on the chosen nozzle
• The ST-164 injector is available in the nozzle size of 3.5 – 11.0
• The dosing is adjusted by one of the 18 nozzle inserts which are included in the consignment. The connection for chemicals is equipped with an integrated check valve

Features
• Integrated lever that allows you to go from disinfectant to foam to rinse
• Food grade quality and specifications
• Durable Stainless steel construction
• 18 Dosing nozzles included
• Use 0.35 ID hose

Specifications
• Nozzle/Orifice Size: 5.5
• Max Flow Rate: 21 GPM
• Min Flow Rate: 1 GPM
• Max Pressure: 5,000 PSI
• Min Pressure: 1,200 PSI
• Max Temp: 212° F.
• Inlet: 3/8” Female
• Outlet: 1/2” Female
• Hose Barbs: .35” ID hose
• Weight: 4.80 lb

Please use Nozzle Chart to determine proper nozzle size

Note: If between sizes, choose the larger nozzle size

Nozzle Chart

 

See the ST-164 System Diagram below to determine the foam components needed

ST-164 System Diagram