Suttner America

Suttner ST-51.1 Black Variable Spray Nozzle 1/2" M NPT 900 PSI. Nozzle-Twist: The jet can be changed from a conical, wide spray jet to a long-distance pencil jet.

Features
• Internal parts of the surge nozzle are made entirely of stainless stee
• Handwheel cover made of food-approved plastic
• Change the shape of the jet by simply turning the adjustable nozzle
• Adjustable cone sprays from 0° to 90°

Specifications
• Inlet: 1/2” M NPT
• Maximum Pressure: 900 PSI
• Max. Flow Rate: 21 GPM
• Max. Temp.: 196º F.
• Works with ST-2320 (Green) and other 1/2" FPT spray guns
• Weight: 0.39 lb

Suttner ST-2305 Easy-Pull Spray Gun 5,000 PSI in Green. Comfort technology designed “easy-pull trigger” and comfortable grip provide ease when working long hours. If you have extreme abuse applications, the ST-2305 is up for the challenge with it's handle constructed of impact resistant plastic

Features
• High Quality, German engineered components
• Easy-Pull™ is designed for operators and applications with high-volume of trigger cycling
• The Easy-Pull™, German Engineered Technology reduces trigger pulling force by 60% compared to usual competitors spray gun
• Easiest opening and holding trigger, requires nearly half the effort of the other rear-entry guns
• Proper spray angle for optimal positioning of pressure points
• Unitized valve for easy repair
• Forged brass housing for maximum strength

Specifications
• Max Pressure: 5,000 PSI
• Max Flow: 12.0 GPM
• Max Temp: 300° F.
• Color: Green
• Inlet: 3/8" Female NPT
• Outlet: 1/4" Female NPT
• Weight: 1.22 lb

Suttner ST-2305 Easy-Pull Spray Gun 5,000 PSI in Yellow. Comfort technology designed “easy-pull trigger” and comfortable grip provide ease when working long hours. If you have extreme abuse applications, the ST-2305 is up for the challenge with it's handle constructed of impact resistant plastic

Features
• High Quality, German engineered components
• Easy-Pull™ is designed for operators and applications with high-volume of trigger cycling
• The Easy-Pull™, German Engineered Technology reduces trigger pulling force by 60% compared to usual competitors spray gun
• Easiest opening and holding trigger, requires nearly half the effort of the other rear-entry guns
• Proper spray angle for optimal positioning of pressure points
• Unitized valve for easy repair
• Forged brass housing for maximum strength

Specifications
• Max Pressure: 5,000 PSI
• Max Flow: 12.0 GPM
• Max Temp: 300° F.
• Color: Yellow
• Inlet: 3/8" Female NPT
• Outlet: 1/4" Female NPT
• Weight: 1.22 lb

Suttner ST-2305 Easy-Pull Spray Gun 5,000 PSI in Blue. Comfort technology designed “easy-pull trigger” and comfortable grip provide ease when working long hours. If you have extreme abuse applications, the ST-2305 is up for the challenge with it's handle constructed of impact resistant plastic

Features
• High Quality, German engineered components
• Easy-Pull™ is designed for operators and applications with high-volume of trigger cycling
• The Easy-Pull™, German Engineered Technology reduces trigger pulling force by 60% compared to usual competitors spray gun
• Easiest opening and holding trigger, requires nearly half the effort of the other rear-entry guns
• Proper spray angle for optimal positioning of pressure points
• Unitized valve for easy repair
• Forged brass housing for maximum strength

Specifications
• Max Pressure: 5,000 PSI
• Max Flow: 12.0 GPM
• Max Temp: 300° F.
• Color: Blue
• Inlet: 3/8" Female NPT
• Outlet: 1/4" Female NPT
• Weight: 1.22 lb

Suttner 200163552 Injector Non-Return Valve 1/4" ST-163-168 "Extreme"

1/4" M

M14 M

V4A Extreme

Highest chemical resistance With o-ring

Suttner ST-36 Sludge Pump (03.0) w/ 15' Hose, 1/4" QC Inlet. Attaches to pressure washer and turns it into a high output pump. Great for flood cleanup, car wash pits, draining pools or chemical spills

Features
• Water flowing through the high pressure nozzle creates a powerful venturi suction that vacuums up slurry solutions
• Debris as large as 3/4” will pass through the casting and out the discharge hose
• Vacuums up liquid slurries at a ratio of about 1:11 Example: Using 4 GPM will produce an output of 44 GPM
• Hose barb 1 1/2"

Suttner ST-36 Sludge Pump In Action on YouTube

Specifications
• Nozzle Size: 3.0 (0 degree)
• Flow Rate: 11:1
• Max Pressure: 4,000 PSI
• Hose Length: 15’
• Max Temp: 104° F.
• Inlet: 1/4" Male QC Plug
• Weight: 5.5 lb

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

Suttner ST-009L 47” Nickel Chrome Plated Steel 6,000 PSI Lance with Vented Grip and Nozzle Protector. Suitable when using corrosive chemical. Suttner’s most popular lances for cold or hot water applications

Features:
• High Quality, German engineered components
• Vented grip easily adjusts anywhere on lance for anyone's desired ergonomic position
• Comes with ST-004 nozzle protector
• Vented grip allows heat to dissipate providing a cooler handle
• Threads are rolled on providing consistent sealing and four times the strength than cut threads

Specifications:
• Length: 47"
• Pipe Material: Nickel chrome plated steel
• Grip: 11" Vented
• Inlet: 1/4” MNPT
• Outlet: 1/4” FNPT
• Maximum Pressure: 6,000 PSI
• Max. Temp.: 300° F
• Weight: 2.2 lbs.

Suttner ST-167 Stainless Steel Chemical Bypass Injector, #5.5, 5000 Psi, 3/8" F x 3/8” F

Field of Application
• The injectors completely made out of stainless steel make it possible to open two cross section areas (50 mm2 each) in order to guarantee a smooth use without drop in pressure when washing/rinsing
• This ensures that the injector can be permanently kept in the high pressure line, also at the time when large water quantities are used e.g. in the agriculture or food industry
• The cleaning capacity when cleaning and rinsing is not affected at all.
• A lever makes it possible to change from the cleaning and rinsing mode into injector operation
• When using the cleaning mode, there are two bore holes guiding the high pressure water parallel to the injector (bypass mode)
• When using the injector the available water quantity is guided through the injection area

Features
• Integrated lever that allows you to go from disinfectant to foam to rinse
• Food grade quality and specifications
• Durable Stainless steel construction
• 10 Dosing nozzles included
• Use 0.35 ID hose

Specifications
• Nozzle/Orifice Size: 5.5
• Max Flow Rate:18 GPM
• Min Flow Rate: 1 GPM
• Max Pressure: 5,000 PSI
• Min Pressure: 1,000 PSI
• Max Temp: 212° F.( Optimum foam created 130°F or less)
• Inlet: 3/8” Female
• Outlet: 3/8” Female
• Hose Barbs: .35” ID hose
• See the ST-167 System Diagram (3rd Picture)
• Weight: 2.38 lb

Please use Nozzle Chart to determine proper nozzle size

Note: If between sizes, choose the larger nozzle size

Nozzle Chart

Suttner ST-75.2 Long Range Foam Nozzle 5,000 PSI with #15 Air Injector Nozzle and 1/4" FPT Inlet. The ST-75 Long Rang foam nozzle throw foam up to 40 feet

Features
• By means of the foam head ST-75.2 different foam applications are possible as the air injector nozzle is easily exchangeable and adaptable
• The maximum flow is dependent on the chosen nozzle size
• 1/4” Stainless steel inlet

ST-75 Long Range Foamer with ST-160 Chemical Injector on YouTube

Specifications
• Air Injector Nozzle Size: 15
• Max Pressure: 5,000 PSI
• Flow Rate: up to 7 GPM
• Inlet: 1/4" FPT
• Note: Suttner ST-160, ST-160M or St-164 Chemical or Foam injector required and is not included
• Weight: 0.75 lb

Please use Nozzle Chart to determine proper Spray Nozzle Size

Nozzle Chart

Use Spray Nozzle Size and Foam Nozzle Chart to determine correct Foam Nozzle to use

Foam Nozzle Chart

Suttner ST-166 Stainless Steel Dual Chemical Injector w/18 Metering / Dosing Nozzles, #11.0, 5000 PSI, 3/8" F x 3/8” M

Features
• Food grade quality and specifications
• Durable Stainless Steel housing
• 18 Metering / dosing nozzles included (See 3rd picture)
• Uses .35" I.D. Hose

Specifications
• Nozzle/Orifice Size: 11.0
• Max Flow Rate: 18 GPM
• Min Flow Rate: 1 GPM
• Max Pressure: 5,000 PSI
• Min Pressure: 1,000 PSI
• Max Temp: 194° F.
• Inlet: 3/8” Female
• Outlet: 3/8” Male
• Hose Barbs (2): .35” ID hose
• Weight: 0.75 lb

Please use Nozzle Chart to determine proper nozzle size

Note: If between sizes, choose the larger nozzle size

Nozzle Chart

See the ST-166 System Diagram below to determine the foam components needed

ST-166 System Diagram

Suttner ST-167 Stainless Steel Chemical Bypass Injector, #6.0, 5000 Psi, 3/8" F x 3/8” F

Field of Application
• The injectors completely made out of stainless steel make it possible to open two cross section areas (50 mm2 each) in order to guarantee a smooth use without drop in pressure when washing/rinsing
• This ensures that the injector can be permanently kept in the high pressure line, also at the time when large water quantities are used e.g. in the agriculture or food industry
• The cleaning capacity when cleaning and rinsing is not affected at all.
• A lever makes it possible to change from the cleaning and rinsing mode into injector operation
• When using the cleaning mode, there are two bore holes guiding the high pressure water parallel to the injector (bypass mode)
• When using the injector the available water quantity is guided through the injection area

Features
• Integrated lever that allows you to go from disinfectant to foam to rinse
• Food grade quality and specifications
• Durable Stainless steel construction
• 10 Dosing nozzles included
• Use 0.35 ID hose

Specifications
• Nozzle/Orifice Size: 6.0
• Max Flow Rate:18 GPM
• Min Flow Rate: 1 GPM
• Max Pressure: 5,000 PSI
• Min Pressure: 1,000 PSI
• Max Temp: 212° F.( Optimum foam created 130°F or less)
• Inlet: 3/8” Female
• Outlet: 3/8” Female
• Hose Barbs: .35” ID hose
• See the ST-167 System Diagram (3rd Picture)
• Weight: 2.38 lb

Please use Nozzle Chart to determine proper nozzle size

Note: If between sizes, choose the larger nozzle size

Nozzle Chart

Suttner ST-167 Stainless Steel Chemical Bypass Injector, #8.0, 5000 Psi, 3/8" F x 3/8” F

Field of Application
• The injectors completely made out of stainless steel make it possible to open two cross section areas (50 mm2 each) in order to guarantee a smooth use without drop in pressure when washing/rinsing
• This ensures that the injector can be permanently kept in the high pressure line, also at the time when large water quantities are used e.g. in the agriculture or food industry
• The cleaning capacity when cleaning and rinsing is not affected at all.
• A lever makes it possible to change from the cleaning and rinsing mode into injector operation
• When using the cleaning mode, there are two bore holes guiding the high pressure water parallel to the injector (bypass mode)
• When using the injector the available water quantity is guided through the injection area

Features
• Integrated lever that allows you to go from disinfectant to foam to rinse
• Food grade quality and specifications
• Durable Stainless steel construction
• 10 Dosing nozzles included
• Use 0.35 ID hose

Specifications
• Nozzle/Orifice Size: 8.0
• Max Flow Rate:18 GPM
• Min Flow Rate: 1 GPM
• Max Pressure: 5,000 PSI
• Min Pressure: 1,000 PSI
• Max Temp: 212° F.( Optimum foam created 130°F or less)
• Inlet: 3/8” Female
• Outlet: 3/8” Female
• Hose Barbs: .35” ID hose
• See the ST-167 System Diagram (3rd Picture)
• Weight: 2.38 lb

Please use Nozzle Chart to determine proper nozzle size

Note: If between sizes, choose the larger nozzle size

Nozzle Chart

Suttner ST-167 Stainless Steel Chemical Bypass Injector, #10.0, 5000 Psi, 3/8" F x 3/8” F

Field of Application
• The injectors completely made out of stainless steel make it possible to open two cross section areas (50 mm2 each) in order to guarantee a smooth use without drop in pressure when washing/rinsing
• This ensures that the injector can be permanently kept in the high pressure line, also at the time when large water quantities are used e.g. in the agriculture or food industry
• The cleaning capacity when cleaning and rinsing is not affected at all.
• A lever makes it possible to change from the cleaning and rinsing mode into injector operation
• When using the cleaning mode, there are two bore holes guiding the high pressure water parallel to the injector (bypass mode)
• When using the injector the available water quantity is guided through the injection area

Features
• Integrated lever that allows you to go from disinfectant to foam to rinse
• Food grade quality and specifications
• Durable Stainless steel construction
• 10 Dosing nozzles included
• Use 0.35 ID hose

Specifications
• Nozzle/Orifice Size: 10.0
• Max Flow Rate:18 GPM
• Min Flow Rate: 1 GPM
• Max Pressure: 5,000 PSI
• Min Pressure: 1,000 PSI
• Max Temp: 212° F.( Optimum foam created 130°F or less)
• Inlet: 3/8” Female
• Outlet: 3/8” Female
• Hose Barbs: .35” ID hose
• See the ST-167 System Diagram (3rd Picture)
• Weight: 2.38 lb

Please use Nozzle Chart to determine proper nozzle size

Note: If between sizes, choose the larger nozzle size

Nozzle Chart

Suttner ST-167 Stainless Steel Chemical Bypass Injector, #12.0, 5000 Psi, 3/8" F x 3/8” F

Field of Application
• The injectors completely made out of stainless steel make it possible to open two cross section areas (50 mm2 each) in order to guarantee a smooth use without drop in pressure when washing/rinsing
• This ensures that the injector can be permanently kept in the high pressure line, also at the time when large water quantities are used e.g. in the agriculture or food industry
• The cleaning capacity when cleaning and rinsing is not affected at all.
• A lever makes it possible to change from the cleaning and rinsing mode into injector operation
• When using the cleaning mode, there are two bore holes guiding the high pressure water parallel to the injector (bypass mode)
• When using the injector the available water quantity is guided through the injection area

Features
• Integrated lever that allows you to go from disinfectant to foam to rinse
• Food grade quality and specifications
• Durable Stainless steel construction
• 10 Dosing nozzles included
• Use 0.35 ID hose

Specifications
• Nozzle/Orifice Size: 12.0
• Max Flow Rate:18 GPM
• Min Flow Rate: 1 GPM
• Max Pressure: 5,000 PSI
• Min Pressure: 1,000 PSI
• Max Temp: 212° F.( Optimum foam created 130°F or less)
• Inlet: 3/8” Female
• Outlet: 3/8” Female
• Hose Barbs: .35” ID hose
• See the ST-167 System Diagram (3rd Picture)
• Weight: 2.38 lb

Please use Nozzle Chart to determine proper nozzle size

Note: If between sizes, choose the larger nozzle size

Nozzle Chart

Suttner ST-167 Stainless Steel Chemical Bypass Injector, #3.0, 5000 Psi, 3/8" F x 3/8” F

Field of Application
• The injectors completely made out of stainless steel make it possible to open two cross section areas (50 mm2 each) in order to guarantee a smooth use without drop in pressure when washing/rinsing
• This ensures that the injector can be permanently kept in the high pressure line, also at the time when large water quantities are used e.g. in the agriculture or food industry
• The cleaning capacity when cleaning and rinsing is not affected at all.
• A lever makes it possible to change from the cleaning and rinsing mode into injector operation
• When using the cleaning mode, there are two bore holes guiding the high pressure water parallel to the injector (bypass mode)
• When using the injector the available water quantity is guided through the injection area

Features
• Integrated lever that allows you to go from disinfectant to foam to rinse
• Food grade quality and specifications
• Durable Stainless steel construction
• 10 Dosing nozzles included
• Use 0.35 ID hose

Specifications
• Nozzle/Orifice Size: 3.0
• Max Flow Rate:18 GPM
• Min Flow Rate: 1 GPM
• Max Pressure: 5,000 PSI
• Min Pressure: 1,000 PSI
• Max Temp: 212° F.( Optimum foam created 130°F or less)
• Inlet: 3/8” Female
• Outlet: 3/8” Female
• Hose Barbs: .35” ID hose
• See the ST-167 System Diagram (3rd Picture)
• Weight: 2.38 lb

Please use Nozzle Chart to determine proper nozzle size

Note: If between sizes, choose the larger nozzle size

Nozzle Chart

Suttner ST-285 Unloader Valve 3,625 PSI 26 GPM 1/2" F. Suttner unloader valve ST-285 for high flow rates. Particularly durable! High-quality combination of materials

Features:
• Soft switching behavior
• Fatigue-free spring
• Particularly easy to maintain
• Low pressure drop
• Sealing seats in high grade stainless steel and Ceramic ball in bypass

Flyer

Specifications:
• Max Pressure: 3,625 PSI
• Flow Rate: 26 GPM
• Max Temperature: 194° F
• Inlet Port: 1/2" F
• Outlet Port: 1/2” F
• Bypass Port: 1/2” F
• Weight: 2.10 lbs