Suttner America

1/4” Suttner ST-49 Stainless Steel Rotating Sewer Jetter Nozzle, # 5.5. Does not have a forward spraying orifice, but has 2 orifices angled to the side. Rotating duct style has 90° side ports that are ideal for cleaning industrial sized air conditioning and heating ducts

Features
• High Quality, German engineered components
• 2 Side ports, 0 Forward, 0 Backward
• Corrosion resistant stainless steel and brass construction

Specifications
• Inlet: 1/4” Female
• Nozzle Size: # 5.5
• Material: Stainless steel & brass
• Maximum Pressure: 4,000 PSI
• Outside Diameter (O.D.): .745”
• Weight: .08 lb

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

Features:
• Built-in exclusive down stream (venturi-type) injector with built in orifice provides more precise siphon rate
• Adjustable valve allows limit setting on both maximum pressure and minimum pressure
• Straight flow-through design minimizes pressure loss through valve
• Working components constructed of high-grade stainless steel. PTFE and Viton seals for maximum heat and chemical resistance
• Internal bypass valve can be easily accessed and repaired without removing unloader from unit

Specifications:
• Maximum Pressure: 3,625 PSI
• Minimum Pressure: 500 PSI
• Flow Rate: 8 GPM
• Orifice: 2.4 mm
• Injector Flow Rate: 3.35 – 5.0 GPM
• Normally closed bypass
• Amps: 125 VAC 5A, 240 VAC 3A
• Max Temperature: 176° F
• Inlet Port: 3/8" FNPT
• Outlet Port: 3/8” FNPT
• Bypass Port: 1/4” FNPT
• Weight: 1.86 lbs

Features:
• Built-in exclusive down stream (venturi-type) injector with built in orifice provides more precise siphon rate
• Adjustable valve allows limit setting on both maximum pressure and minimum pressure
• Straight flow-through design minimizes pressure loss through valve
• Working components constructed of high-grade stainless steel. PTFE and Viton seals for maximum heat and chemical resistance
• Internal bypass valve can be easily accessed and repaired without removing unloader from unit

Specifications:
• Maximum Pressure: 3,625 PSI
• Minimum Pressure: 500 PSI
• Flow Rate: 8 GPM
• Orifice: 2.1 mm
• Injector Flow Rate: 2.25 - 3.25 GPM
• Normally closed bypass
• Amps: 125 VAC 5A, 240 VAC 3A
• Max Temperature: 176° F
• Inlet Port: 3/8" FNPT
• Outlet Port: 3/8” FNPT
• Bypass Port: 1/4” FNPT
• Weight: 1.86 lbs

Features:
• Built-in exclusive down stream (venturi-type) injector with built in orifice provides more precise siphon rate
• Adjustable valve allows limit setting on both maximum pressure and minimum pressure
• Straight flow-through design minimizes pressure loss through valve
• Working components constructed of high-grade stainless steel. PTFE and Viton seals for maximum heat and chemical resistance
• Internal bypass valve can be easily accessed and repaired without removing unloader from unit

Specifications:
• Maximum Pressure: 3,625 PSI
• Minimum Pressure: 500 PSI
• Flow Rate: 8 GPM
• Orifice: 1.8 mm
• Injector Flow Rate: 1.5 - 2.25 GPM
• Normally closed bypass
• Amps: 125 VAC 5A, 240 VAC 3A
• Max Temperature: 176° F
• Inlet Port: 3/8" FNPT
• Outlet Port: 3/8” FNPT
• Bypass Port: 1/4” FNPT
• Weight: 1.86 lbs

Features:
• Can be mounted horizontal or vertical
• Micro-switch replaces reed switch for better reliability and water protection
• Easy to install
• Resistant against shock and vibration
• IP 65 rated-water and dust proof
• Can be wired normally open or normally closed

Specifications:
• Switch Point: 1.2 GPM
• Max. Pressure: 5,000 PS
• Max. Flow Rate: 12 GPM
• Max Voltage: 250 V
• Max Current: 10.1 Amps
• Max: Fluid Temperature: 176° F
• Cable Length: 47.0”
• Inlet & Outlet: 3/8” FNPT
• Weight: 0.80 lbs

Features:
• Durable spray gun with rubber sheathing protects against cold, heat and impact
• Adjusting screw retains desired spray pattern
• Fixing clamp holds back trigger allowing comfort and steady spray
• Comes with trigger guard
• Food Grade

Specifications:
• Housing: Stainless steel
• Inlet: 1/2” FNPT
• Maximum Pressure: 700 PSI
• Max. Flow Rate: 27 GPM
• Max. Temp.: 190º F.
• Color: Blue
• Weight: 2.05 lbs.

Suttner Grey ST-1200B Brass Wash Down Gun 700 PSI 27 GPM. Ideal for high volume low pressure needs, such as farm, chemical or food industries. ST-1200 has forged brass housing for maximum strength

Features:
• Durable spray gun with rubber sheathing protects against cold, heat and impact
• Adjusting screw retains desired spray pattern
• Fixing clamp holds back trigger allowing comfort and steady spray

Specifications:
• Housing: Forged brass
• Inlet: 1/2” FNPT
• Maximum Pressure: 700 PSI
• Max. Flow Rate: 27 GPM
• Max. Temp.: 190º F.
• Color: Grey
• Weight: 1.86 lbs.

Features:
• Can be mounted horizontal or vertical
• Micro-switch replaces reed switch for better reliability and water protection
• Easy to install
• Resistant against shock and vibration
• IP 65 rated-water and dust proof
• Can be wired normally open or normally closed

Specifications:
• Switch Point: 0.3 GPM
• Max. Pressure: 5,000 PS
• Max. Flow Rate: 12 GPM
• Max Voltage: 250 V
• Max Current: 10.1 Amps
• Max: Fluid Temperature: 176° F
• Cable Length: 47.0”
• Inlet & Outlet: 3/8” FNPT
• Weight: 0.80 lbs

Features
• High Quality, German engineered components
• Forged stainless steel housing, piston, and malleable seat
• Special heat and chemical resistant seals

Specifications
• Max Pressure: 8,700 PSI
• Max Flow: 21.0 GPM
• Max Temp: 300° F.
• Inlet: 3/8" Female NPT
• Outlet: 1/4" Female NPT
• Weight: 2.58 lb

Features
• High Quality, German engineered components
• Forged stainless steel housing, piston, and malleable seat
• Special heat and chemical resistant seals

Specifications
• Max Pressure: 8,700 PSI
• Max Flow: 21.0 GPM
• Max Temp: 300° F.
• Inlet: 1/2" Female NPT
• Outlet: 1/2" Female NPT
• Weight: 2.58 lb

Features
• High Quality, German engineered components
• Forged stainless steel housing, piston, and malleable seat
• Special heat and chemical resistant seals
• Food Grade

Specifications
• Max Pressure: 2,170 PSI
• Max Flow: 27.0 GPM
• Max Temp: 300° F.
• Inlet: 1/2" Female NPT
• Outlet: 1/2" Female NPT
• Weight: 2.58 lb

Suttner ST-505 Stainless Steel Vertical Mount Flow Switch Rated to 8,700 PSI. Vertical mounting position and free floating brass magnet configuration

Features:
• Vertical mounting ONLY
• Mounts further downstream in pumping system than traditional vacuum switches, thereby minimizing potential leak points that can cause vacuum switches to close
• Easy reed switch replacement

Specifications:
• Max. Pressure: 8,700 PS
• Min. Pressure: 75 PSI
• Max. Flow Rate: 8 GPM
• Min. Flow Rate: 1 GPM
• Max Voltage: 250 V
• Max Current: 3 Amps
• Max: Fluid Temperature: 176° F
• Cable Length: 47.0”
• Inlet & Outlet: 3/8” FNPT
• Housing: Stainless Steel
• Color: Blue
• 3/8” Bonded seal #78888389 is recommended to seal inlet and outlet threads
• Weight: 0.90 lbs

Features
• High Quality, German engineered components
• The Relax-Action™, German Engineered Technology reduces trigger pulling force by 40% and holding force up to 90% compared to usual competitors spray gun
• Relax-Action™ is designed for operators and applications with longer periods of cleaning time
• Stainless Steel Housing
• Tungsten carbide ball with special valve seat

Specifications
• Max Pressure: 7,300 PSI
• Max Flow: 8.0 GPM
• Max Temp: 300° F.
• Inlet: 3/8" Female NPT
• Outlet: 1/4" Female NPT
• Weight: 1.32 lb

Features
• High Quality, German engineered components
• The Relax-Action™, German Engineered Technology reduces trigger pulling force by 40% and holding force up to 90% compared to usual competitors spray gun
• Relax-Action™ is designed for operators and applications with longer periods of cleaning time
• Stainless Steel Housing
• Stainless steel valve components
• Easiest opening and holding trigger in its class
• Proper spray angle for optimal positioning of pressure points

Specifications
• Max Pressure: 1,800 PSI
• Max Flow: 21.0 GPM
• Max Temp: 300° F.
• Inlet: 3/8" Female NPT
• Outlet: 1/4" Female NPT
• Weight: 1.25 lb

Features
• High Quality, German engineered components
• The Relax-Action™, German Engineered Technology reduces trigger pulling force by 40% and holding force up to 90% compared to usual competitors spray gun
• Relax-Action™ is designed for operators and applications with longer periods of cleaning time
• Stainless Steel Housing
• Ceramic ball together with a seal kit made out of stainless steel
• Food Grade

Specifications
• Max Pressure: 5,000 PSI
• Max Flow: 12.0 GPM
• Max Temp: 300° F.
• Inlet: 3/8" Female NPT
• Outlet: 1/4" Female NPT
• Weight: 1.25 lb

Features
• High Quality, German engineered components
• The Relax-Action™, German Engineered Technology reduces trigger pulling force by 40% and holding force up to 90% compared to usual competitors spray gun
• Relax-Action™ is designed for operators and applications with longer periods of cleaning time
• Stainless steel components
• 303 Stainless Steel Housing
• Easiest opening and holding trigger in its class
• Proper spray angle for optimal positioning of pressure points
• Food Grade

Specifications
• Max Pressure: 5,000 PSI
• Max Flow: 12.0 GPM
• Max Temp: 300° F.
• Inlet: 3/8" Female NPT
• Outlet: 1/4" Female NPT
• Weight: 1.24 lb

Features
• High Quality, German engineered components
• The Relax-Action™, German Engineered Technology reduces trigger pulling force by 40% and holding force up to 90% compared to usual competitors spray gun
• Relax-Action™ is designed for operators and applications with longer periods of cleaning time
• Easiest opening and holding trigger in its class
• Proper spray angle for optimal positioning of pressure points
• Forged brass housing for maximum strength

Specifications
• Max Pressure: 1,800 PSI
• Max Flow: 21.0 GPM
• Max Temp: 300° F.
• Inlet: 3/8" Female NPT
• Outlet: 1/4" Female NPT
• Weight: 1.30 lb

Features
• High Quality, German engineered components
• Ceramic ball in valve is highly resistant against nearly all soaps and acids
• Easy-Pull™ is designed for operators and applications with high-volume of trigger cycling
• The Easy-Pull™, German Engineered Technology reduces trigger pulling force by 60% compared to usual competitors spray gun
• Easiest opening and holding trigger, requires nearly half the effort of the other rear-entry guns
• Proper spray angle for optimal positioning of pressure points
• Forged brass housing for maximum strength

Specifications
• Max Pressure: 5,000 PSI
• Max Flow: 12.0 GPM
• Max Temp: 300° F.
• Inlet: 3/8" Female NPT
• Outlet: 1/4" Female NPT
• Weight: 1.30 lb

Features
• High Quality, German engineered components
• Easy-Pull™ is designed for operators and applications with high-volume of trigger cycling
• The Easy-Pull™, German Engineered Technology reduces trigger pulling force by 60% compared to usual competitors spray gun
• Easiest opening and holding trigger, requires nearly half the effort of the other rear-entry guns
• Proper spray angle for optimal positioning of pressure points
• Unitized valve for easy repair
• Forged brass housing for maximum strength

Specifications
• Max Pressure: 5,000 PSI
• Max Flow: 12.0 GPM
• Max Temp: 300° F.
• Color: Orange
• Inlet: 3/8" Female NPT
• Outlet: 1/4" Female NPT
• Weight: 1.22 lb

Features
• High Quality, German engineered components
• Ergonomic design
• Unitized valve for easy repair
• LFT "Low Friction Trigger, reduces pulling force
• Same inlet and outlet angles as the ST-1500 & ST-2000 Spray Guns

Specifications
• Max Pressure: 5,000 PSI
• Max Flow: 10 GPM
• Max Temp: 302° F.
• Inlet: 3/8" Female NPT
• Outlet: 1/4" Female NPT
• Weight: 1.25 lb