Electric Flange Pump 0-1,999

Annovi Reverberi / AR North America RCA E Version with F8 flange series pumps are designed to direct drive on electric NEMA 56 C motors ranging from 1.5 – 6.0 HP. Intended use for heavy tasks; this triplex plunger pump features the latest in design and technology. Life tested over 2,000 hours at maximum performance. The RCA is a result of our combined 60 years of pumps building experience and expertise

Features
• Latest in design and technology
• New crankcase style
• High strength forged brass manifold for long term use
• NEW ceramic plungers, thicker wall to help prevent thermal shock
• Stainless steel valves
• Side mount valve seat o-rings
• High quality high pressure seals
• NEW low pressure seal with built in scraper
• Two piece piston guides
• NEW connecting rod with 12% more load surface
• Large side cover sight glass
• Oversized bearings
• Rear cover oil drain
• Forged, precision ground crankshaft

Specifications
• Max. Volume: 3.5 GPM
• Max. Discharge Pressure: 1,600 PSI
• Max. Pump Speed: 1,750 RPM
• Shaft Diameter: 5/8” Hollow
• Max. Horsepower Requirements: 3.8 EBHP
• Max. Fluid Temp.: 140° F.
• Inlet Ports (2): 1/2" Female
• Outlet Ports (2): 3/8" Female
• Oil capacity: 9.81 oz
• Weight: 11.0 lb.

Annovi Reverberi / AR North America RCAM05G15E-F8 RCAM E Version with F8 flange series misting pumps are designed to direct drive on electric NEMA 56 C motors ranging from 0.5 – 2.0 HP. This triplex plunger pump features the latest in design and technology. Life tested over 2,000 hours at maximum performance. The RCAM is a result of our combined 60 years of pumps building experience and expertise

Features
• Designed for heavy duty misting applications
• Latest in design and technology
• New crankcase style
• High strength forged brass manifold for long term use
• NEW ceramic plungers, thicker wall to help prevent thermal shock
• Stainless steel valves
• Side mount valve seat o-rings
• High quality high pressure seals
• NEW low pressure seal with built in scraper
• Two piece piston guides
• NEW connecting rod with 12% more load surface
• Large side cover sight glass
• Oversized bearings
• Rear cover oil drain
• Forged, precision ground crankshaft

Specifications
• Max. Volume: 0.5 GPM
• Max. Discharge Pressure: 1,500 PSI
• Max. Pump Speed: 1,750 RPM
• Shaft Diameter: 5/8” Hollow
• Max. Horsepower Requirements: 0.5 EBHP
• Max. Fluid Temp.: 140° F.
• Inlet Ports (2): 1/2" Female
• Outlet Ports (2): 3/8" Female
• Oil capacity: 9.81 oz
• Weight: 11.0 lb.

Annovi Reverberi / AR North America RCAM E Version with F8 flange series misting pumps are designed to direct drive on electric NEMA 56 C motors ranging from 0.5 – 2.0 HP. This triplex plunger pump features the latest in design and technology. Life tested over 2,000 hours at maximum performance. The RCAM is a result of our combined 60 years of pumps building experience and expertise

Features
• Designed for heavy duty misting applications
• Latest in design and technology
• New crankcase style
• High strength forged brass manifold for long term use
• NEW ceramic plungers, thicker wall to help prevent thermal shock
• Stainless steel valves
• Side mount valve seat o-rings
• High quality high pressure seals
• NEW low pressure seal with built in scraper
• Two piece piston guides
• NEW connecting rod with 12% more load surface
• Large side cover sight glass
• Oversized bearings
• Rear cover oil drain
• Forged, precision ground crankshaft

Specifications
• Max. Volume: 1.0 GPM
• Max. Discharge Pressure: 1,500 PSI
• Max. Pump Speed: 1,750 RPM
• Shaft Diameter: 5/8” Hollow
• Max. Horsepower Requirements: 1.0 EBHP
• Max. Fluid Temp.: 140° F.
• Inlet Ports (2): 1/2" Female
• Outlet Ports (2): 3/8" Female
• Oil capacity: 9.81 oz
• Weight: 11.0 lb.

Annovi Reverberi / AR North America RCAM025G15E-F8 RCAM E Version with F8 flange series misting pumps are designed to direct drive on electric NEMA 56 C motors ranging from 0.25 – 2.0 HP. This triplex plunger pump features the latest in design and technology. Life tested over 2,000 hours at maximum performance. The RCAM is a result of our combined 60 years of pumps building experience and expertise

Features
• Designed for heavy duty misting applications
• Latest in design and technology
• New crankcase style
• High strength forged brass manifold for long term use
• NEW ceramic plungers, thicker wall to help prevent thermal shock
• Stainless steel valves
• Side mount valve seat o-rings
• High quality high pressure seals
• NEW low pressure seal with built in scraper
• Two piece piston guides
• NEW connecting rod with 12% more load surface
• Large side cover sight glass
• Oversized bearings
• Rear cover oil drain
• Forged, precision ground crankshaft

Specifications
• Max. Volume: 0.25 GPM
• Max. Discharge Pressure: 1,500 PSI
• Max. Pump Speed: 1,750 RPM
• Shaft Diameter: 5/8” Hollow
• Max. Horsepower Requirements: 0.3 EBHP
• Max. Fluid Temp.: 140° F.
• Inlet Ports (2): 1/2" Female
• Outlet Ports (2): 3/8" Female
• Oil capacity: 9.81 oz
• Weight: 11.0 lb.

1,500 PSI 2.11 GPM General TT9051EBF Direct Couple to Electric Motors (NEMA 56C)

Features:
• Forged brass manifold with exclusive lifetime warranty
• Die-cast annodized aluminum, oil-bath crankcase
• Solid ceramic plungers with continuously lubricated packings
• The original Interpump unitized, stainless steel, K01 inlet and outlet valves
• Ideal for all general cleaning, RO and misting applications
• Comes standard with NEMA 56C electric motor mounting flange
• Also available in “L” left-handed versions

Specifications Sheet

Specifications:
• Maximum Volume: 2.11 GPM
• Maximum Discharge Pressure: 1,500 PSI
• Maximum Pump Speed: 1,750 RPM
• Maximum Inlet Pressure: 125 PSI
• Oil Capacity: 11.2 oz.
• Maximum Fluid Temperature: 165°F
• Inlet Port Thread: 3/8-19 BSPP-F
• Discharge Port Thread: 1/4-19 BSPP-F
• Shaft Diameter 5/8 in. / 16 mm
• Horespower: 2.2 EBHP
• Weight 12.0 lbs.

1,500 PSI 2.11 GPM General TT9061EBF Direct Couple to Electric Motors (NEMA 56C)

Features:
• Forged brass manifold with exclusive lifetime warranty
• Die-cast annodized aluminum, oil-bath crankcase
• Solid ceramic plungers with continuously lubricated packings
• The original Interpump unitized, stainless steel, K01 inlet and outlet valves
• Ideal for all general cleaning, RO and misting applications
• Comes standard with NEMA 56C electric motor mounting flange
• Also available in “L” left-handed versions

Specifications Sheet

Specifications:
• Maximum Volume: 2.11 GPM
• Maximum Discharge Pressure: 1,500 PSI
• Maximum Pump Speed: 3,400 RPM
• Maximum Inlet Pressure: 125 PSI
• Oil Capacity: 11.2 oz.
• Maximum Fluid Temperature: 165°F
• Inlet Port Thread: 3/8-19 BSPP-F
• Discharge Port Thread: 1/4-19 BSPP-F
• Shaft Diameter 5/8 in. / 16 mm
• Horespower: 2.2 EBHP
• Weight 12.0 lbs.

• Triplex Plunger Pump
• Direct Drive with Electric Flange NEMA 56C
• Max. Volume: 3.0 GPM
• Max. Discharge Pressure: 1,800 PSI
• Max. Pump Speed: 1750 RPM
• Shaft Diameter: 5/8” Hollow
• Minimum Horsepower Requirements: 4.0 BHP
• Max. Fluid Temp.: 140 degrees F.
• Inlet Ports (2): 1/2" BSP
• Discharge Ports (2): 3/8" BSP
• Drive Side: Standard right
• Forged brass head & valve covers
• Solid ceramic plungers
• Weight: 15.0 lb

• Triplex Plunger Pump
• Direct Drive with Electric Flange NEMA 56C
• Max. Volume: 2.1 GPM
• Max. Discharge Pressure: 1,500 PSI
• Max. Pump Speed: 3400 RPM
• Shaft Diameter: 5/8” Hollow
• Minimum Horsepower Requirements: 2.0 BHP
• Max. Fluid Temp.: 160 degrees F.
• Inlet Ports (2): 1/2" BSP
• Discharge Ports (2): 3/8" BSP
• Drive Side: Standard right
• Forged brass head & valve covers
• Solid ceramic plungers
• Weight: 9.0-11.0 lb.

• Triplex Plunger Pump
• Direct Drive with Electric Flange NEMA 56C
• Max. Volume: 3.0 GPM
• Max. Discharge Pressure: 1,600 PSI
• Max. Pump Speed: 3400 RPM
• Shaft Diameter: 5/8” Hollow
• Minimum Horsepower Requirements: 3.0 BHP
• Max. Fluid Temp.: 160 degrees F.
• Inlet Ports (2): 1/2" BSP
• Discharge Ports (2): 3/8" BSP
• Drive Side: Standard right
• Forged brass head & valve covers
• Solid ceramic plungers
• Weight: 9.0-11.0 lb.

Annovi Reverberi / AR North America XTA E Version with F8 flange series pumps are designed to direct drive on electric NEMA 56 C motors ranging from 1.5 – 6.0 HP. XTA plunger pumps are used for a wide variety of moderate pressure washing applications

Features:
• Constructed with die-cast bodies and feature a brass head
• Internal components include special thick solid ceramic plungers for long life and durability
• Precision cast cooling fins are anodized for maximum heat dissipation
• Oversized needle bearings on the drive side, and ball bearing on the non-drive side assure positive proper shaft alignment and maximum life
• One-piece connecting rods are special alloy aluminum, oversized for strength and load disbursement

Specifications:
• Direct Drive with Electric Flange NEMA 56C
• Max. Volume: 2.1 GPM
• Max. Discharge Pressure: 1,800 PSI
• Max. Pump Speed: 1750 RPM
• Shaft Diameter: 5/8” Hollow
• Minimum Horsepower Requirements: 2.5 BHP
• Max. Fluid Temp.: 160 degrees F.
• Inlet Ports (2): 1/2" BSP
• Discharge Ports (2): 3/8" BSP
• Drive Side: Standard right
• Forged brass head & valve covers
• Solid ceramic plungers
• Weight: 10.0 lb

• Triplex Plunger Pump
• Direct Drive with Electric Flange NEMA 56C
• Max. Volume: 2.80 GPM
• Max. Discharge Pressure: 1,500 PSI
• Max. Pump Speed: 3400 RPM
• Shaft Diameter: 5/8” Hollow
• Max. Horsepower Requirements: 3.0 BHP
• Max. Fluid Temp.: 165º degrees F.
• Inlet Ports (2): 3/8" BSP
• Discharge Ports (2): 1/4" BSP
• Drive Side: Standard right
• Forged brass head & valve covers
• Solid ceramic plungers
• Weight: 11.5 lb.

• Triplex Plunger Pump
• Direct Drive with Electric Flange NEMA 56C
• Max. Volume: 2.11 GPM
• Max. Discharge Pressure: 1,500 PSI
• Max. Pump Speed: 3400 RPM
• Shaft Diameter: 5/8” Hollow
• Max. Horsepower Requirements: 2.2 BHP
• Max. Fluid Temp.: 165º degrees F.
• Inlet Ports (2): 3/8" BSP
• Discharge Ports (2): 1/4" BSP
• Drive Side: Standard left
• Forged brass head & valve covers
• Solid ceramic plungers
• Weight: 11.5 lb.

• Triplex Plunger Pump
• Direct Drive with Electric Flange NEMA 56C
• Max. Volume: 3.0 GPM
• Max. Discharge Pressure: 1,600 PSI
• Max. Pump Speed: 1750 RPM
• Shaft Diameter: 5/8” Hollow
• Minimum Horsepower Requirements: 3.0 BHP
• Max. Fluid Temp.: 160 degrees F.
• Inlet Ports (2): 1/2" BSP
• Discharge Ports (2): 3/8" BSP
• Drive Side: Standard right
• Forged brass head & valve covers
• Solid ceramic plungers
• Weight: 9.0-11.0 lb.

1,500 PSI 2.11 GPM General TT9061EBFUI Direct Couple to Electric Motors (NEMA 56C) with Built In Unloader and Downstrean injector

Features:
• Forged brass manifold with exclusive lifetime warranty
• Die-cast annodized aluminum, oil-bath crankcase
• Solid ceramic plungers with continuously lubricated packings
• The original Interpump unitized, stainless steel, K01 inlet and outlet valves
• Ideal for all general cleaning, RO and misting applications
• Comes standard with NEMA 56C electric motor mounting flange
• Also available in “L” left-handed versions

Specifications Sheet

Specifications:
• Maximum Volume: 2.11 GPM
• Maximum Discharge Pressure: 1,500 PSI
• Maximum Pump Speed: 3,400 RPM
• Maximum Inlet Pressure: 125 PSI
• Oil Capacity: 11.2 oz.
• Maximum Fluid Temperature: 165°F
• Inlet Port Thread: 3/8-19 BSPP-F
• Discharge Port Thread: 1/4-19 BSPP-F
• Shaft Diameter 5/8 in. / 16 mm
• Horespower: 2.2 EBHP
• Weight 12.0 lbs.

1,500 PSI 2.8 GPM General TT9071EBFUI Direct Couple to Electric Motors (NEMA 56C) with Built In Unloader and Downstrean injector

Features:
• Forged brass manifold with exclusive lifetime warranty
• Die-cast annodized aluminum, oil-bath crankcase
• Solid ceramic plungers with continuously lubricated packings
• The original Interpump unitized, stainless steel, K01 inlet and outlet valves
• Ideal for all general cleaning, RO and misting applications
• Comes standard with NEMA 56C electric motor mounting flange
• Also available in “L” left-handed versions

Specifications:
• Maximum Volume: 2.8 GPM
• Maximum Discharge Pressure: 1,500 PSI
• Maximum Pump Speed: 3,400 RPM
• Maximum Inlet Pressure: 125 PSI
• Oil Capacity: 11.2 oz.
• Maximum Fluid Temperature: 165°F
• Inlet Port Thread: 3/8-19 BSPP-F
• Discharge Port Thread: 1/4-19 BSPP-F
• Shaft Diameter 5/8 in. / 16 mm
• Horespower: 2.9 EBHP
• Weight 12.0 lbs.

• Triplex Plunger Pump
• Direct Drive with Electric Flange NEMA 182-184TC
• Max. Volume: 5.5 GPM
• Max. Discharge Pressure: 1,300 PSI
• Max. Pump Speed: 1750 RPM
• Shaft Diameter: 1 1/8” Hollow
• Minimum Horsepower Requirements: 5.0 BHP
• Max. Fluid Temp.: 160 degrees F.
• Inlet Ports (2): 1/2" BSP
• Discharge Ports (2): 3/8" BSP
• Drive Side: Standard right
• Forged brass head & valve covers
• Solid ceramic plungers
• Weight: 22.0 lb