Solid Shaft Pump 3,500 - 4,999

• Triplex Plunger Pump
• Solid Shaft for Belt or Gear Drive
• Max. Volume: 4.0 GPM
• Max. Discharge Pressure: 4,000 PSI
• Max. Pump Speed: 1750 RPM
• Shaft Diameter: 24mm Solid
• Max. Horsepower Requirements: 11.0 BHP
• Bearings are premium SKF tapered roller bearings that provide extra load support, smoother and lower crankcase running temperatures and overall extended pump life
• Max. Fluid Temp.: 160 degrees F.
• Inlet Ports (2): 3/4" BSP
• Discharge Ports (2): 3/8" BSP
• Drive Side: Standard right
• Forged brass head & valve covers
• Plungers are extra thick solid ceramic titanium impregnated for extended seal and pump life
• Weight: 34.0 lb.

Annovi Reverberi / AR North America RRA N Version with 24mm solid shaft series pumps are designed to belt drive or gear drive on gas engines and belt drive or flange coupling on electric motors. Intended use for heavy tasks; this triplex plunger pump features the latest in design and technology. Life tested over 2,000 hours at maximum performance. The RRA is a result of our combined 60 years of pumps building experience and expertise

Features:
• Latest in design and technology
• New crankcase style
• High strength forged brass manifold for long term use
• NEW ceramic plungers, thicker wall to help prevent thermal shock
• Stainless steel valves
• Side mount valve seat o-rings
• High quality high pressure seals
• NEW low pressure seal with built in scraper
• Two piece piston guides
• NEW connecting rod with 12% more load surface
• Large side cover sight glass
• Oversized bearings
• Rear cover oil drain
• Forged, precision ground crankshaft

Specifications:
• Max. Volume: 4.0 GPM
• Max. Discharge Pressure: 4,000 PSI
• Max. Pump Speed: 1,750 RPM
• Shaft Diameter: 24mm Solid
• Max. Horsepower Requirements: 10.9 EBHP
• Max. Fluid Temp.: 140° F.
• Inlet Ports (2): 1/2" Female
• Outlet Ports (2): 3/8" Female
• Oil capacity: 13.35 oz
• Weight: 17.0 lb.

Annovi Reverberi / AR North America RKA4G40HNL pump with Long Shaft. RKA series plunger pumps are designed for a wide variety of high pressure washing applications. Annovi Reverberi RKA N Version with 24mm solid shaft series pumps are designed to belt drive or gear drive on gas engines and belt drive or flange coupling on electric motors

Features:
• Special thick solid ceramic plungers for long life and durability
• Oversized tapered roller bearings and the precision supports assure proper shaft alignment and maximum life.
• Precision cast cooling fins are anodized for maximum heat dissipation
• Nickel plated, forged brass head
• One-Piece connecting rods are oversized for strength and load disbursement
• Valve cages of special designed Ultra-Form provide positive seating and extended life

Specifications:
• Max. Volume: 4.0 GPM
• Max. Discharge Pressure: 4,000 PSI
• Max. Pump Speed: 1,750 RPM
• Shaft Diameter: 24mm Solid (long shaft)
• Shaft Length: 2"
• Max. Horsepower Requirements: 14.54 GHP (Industrial Grade)
• Max. Fluid Temp.: 140° F.
• Inlet Ports (2): 1/2" Female
• Outlet Ports (2): 3/8" Female
• Oil capacity: 15.0 oz
• Weight: 20.0 lb.

General T9281 Triplex Plunger Pump. The preferred pump frame in the pressure cleaning industry

Features:
• Nickel plated forged brass manifold
• Large-capacity, die-cast, anodized aluminum oil-bath crankcase
• Over-sized connecting rods for maximum life
• Heavy-duty tapered roller bearing
• Solid ceramic plungers with continuously lubricated packings
• Unitized stainless steel inlet and discharge valves

WARNING: High Pressure Systems require a primary pressure regulating device (i.e. regulator, unloader) and a secondary pressure relief device (i.e. pop-off valve, relief valve). Failure to install such relief devices properly could result in personal injury or damage to pump or property. GP and PRI Industries do not assume any liability or responsibility for the operation of the user’s high pressure system.

Specifications:
• Triplex Plunger Pump
• Solid Shaft for Belt or Gear Drive
• Max. Volume: 4.0 GPM
• Max. Discharge Pressure: 4,000 PSI
• Max. Pump Speed: 1,750 RPM
• Shaft Diameter: 24mm Solid
• Max. Horsepower Requirements: 11.0 EBHP
• Maximum Inlet Pressure: 125 PSI
• Oil Capacity: 37.2oz.
• Max. Fluid Temp.: 165° F.
• Inlet Ports (2): 1/2-14 BSPP-F
• Discharge Ports (2): 3/8-19 BSPP-F
• Drive Side: Standard right
• Note: Item for sale is PUMP ONLY as shown in picture and does not include unloader which is required for proper operation
• Weight: 33.0 lb.

Annovi Reverberi / AR North America RKA N Version Pump with 24mm solid shaft and 1,750 RPM. Used in a wide variety of high pressure washing applications. These pumps are designed for gearbox , belt drive, or coupling drive systems driven by electric motor or gasoline driven systems, gasoline engine driven systems

Features
• They are constructed of die-cast bodies and feature a nickel plated forged brass head
• Internal components include special thick solid ceramic plungers for long life and durability
• Precision cast cooling fins are anodized for maximum heat dissipation
• Oversized tapered roller bearings and the precision supports assure proper shaft alignment and maximum life
• Valve cages of special designed Ultra-Form provide positive seating and extended life
• One-piece connecting rods are oversized for strength and load disbursement

Specifications
• Max. Volume: 4.5 GPM
• Max. Discharge Pressure: 4,000 PSI
• Max. Pump Speed: 1,750 RPM
• Shaft Diameter: 24mm Solid
• Maximum Horsepower Requirements: 16.36 GHP (Industrial Grade)
• Max. Fluid Temp.: 140º F.
• Inlet Ports (2): 1/2" FPT
• Discharge Ports (2): 3/8" FPT
• Drive Side: Standard right
• Weight: 20.0 lb.

Annovi Reverberi / AR North America RK N Version Pump with 24mm solid shaft and 1,450 RPM. Used in a wide variety of high pressure washing applications. These pumps are designed for gearbox , belt drive, or coupling drive systems driven by electric motor or gasoline driven systems, gasoline engine driven systems

Features
• They are constructed of die-cast bodies and feature a nickel plated forged brass head
• Internal components include special thick solid ceramic plungers for long life and durability
• Precision cast cooling fins are anodized for maximum heat dissipation
• Oversized tapered roller bearings and the precision supports assure proper shaft alignment and maximum life
• Valve cages of special designed Ultra-Form provide positive seating and extended life
• One-piece connecting rods are oversized for strength and load disbursement

Specifications
• Max. Volume: 4.75 GPM
• Max. Discharge Pressure: 4,000 PSI
• Max. Pump Speed: 1,450 RPM
• Shaft Diameter: 24mm Solid
• Maximum Horsepower Requirements: 13.0 EBHP
• Max. Fluid Temp.: 140º F.
• Inlet Ports (2): 1/2" FPT
• Discharge Ports (2): 3/8" FPT
• Drive Side: Standard right
• Weight: 20.0 lb.

Annovi Reverberi / AR North America RK NL Version Pump with 24mm solid long shaft and 1,450 RPM. Used in a wide variety of high pressure washing applications. These pumps are designed for gearbox , belt drive, or coupling drive systems driven by electric motor or gasoline driven systems, gasoline engine driven systems

Features
• They are constructed of die-cast bodies and feature a nickel plated forged brass head
• Internal components include special thick solid ceramic plungers for long life and durability
• Precision cast cooling fins are anodized for maximum heat dissipation
• Oversized tapered roller bearings and the precision supports assure proper shaft alignment and maximum life
• Valve cages of special designed Ultra-Form provide positive seating and extended life
• One-piece connecting rods are oversized for strength and load disbursement

Specifications
• Max. Volume: 4.75 GPM
• Max. Discharge Pressure: 4,000 PSI
• Max. Pump Speed: 1,450 RPM
• Shaft Diameter: 24mm Solid (long shaft)
• Shaft Length: 45mm (1.77")
• Maximum Horsepower Requirements: 13.0 EBHP
• Max. Fluid Temp.: 140º F.
• Inlet Ports (2): 1/2" FPT
• Discharge Ports (2): 3/8" FPT
• Drive Side: Standard right
• Weight: 20.0 lb.

• Triplex Plunger Pump
• Solid Shaft for Belt or Gear Drive
• Max. Volume: 5.5 GPM
• Max. Discharge Pressure: 4,000 PSI
• Max. Pump Speed: 1750 RPM
• Shaft Diameter: 24mm Solid
• Max. Horsepower Requirements: 14.0 BHP
• Bearings are premium SKF tapered roller bearings that provide extra load support, smoother and lower crankcase running temperatures and overall extended pump life
• Max. Fluid Temp.: 160 degrees F.
• Inlet Ports (2): 3/4" BSP
• Discharge Ports (2): 3/8" BSP
• Drive Side: Standard right
• Forged brass head & valve covers
• Plungers are extra thick solid ceramic titanium impregnated for extended seal and pump life
• Weight: 34.0 lb.

• XWA-M5.5G40N-SX Left Handed Version Triplex Plunger Pump
• Solid Shaft for Belt or Gear Drive
• Max. Volume: 5.5 GPM
• Max. Discharge Pressure: 4,000 PSI
• Max. Pump Speed: 1750 RPM
• Shaft Diameter: 24mm Solid
• Max. Horsepower Requirements: 14.0 BHP
• Bearings are premium SKF tapered roller bearings that provide extra load support, smoother and lower crankcase running temperatures and overall extended pump life
• Max. Fluid Temp.: 160° F.
• Inlet Ports (2): 3/4" BSP
• Discharge Ports (2): 3/8" BSP
• Drive Side: Left Side
• Forged brass head & valve covers
• Plungers are extra thick solid ceramic titanium impregnated for extended seal and pump life
• Weight: 34.0 lb.

• Triplex Plunger Pump
• Solid Shaft for Belt or Gear Drive
• Max. Volume: 7.0 GPM
• Max. Discharge Pressure: 4,000 PSI
• Max. Pump Speed: 1750 RPM
• Shaft Diameter: 24mm Solid
• Max. Horsepower Requirements: 17.0 BHP
• Bearings are premium SKF tapered roller bearings that provide extra load support, smoother and lower crankcase running temperatures and overall extended pump life
• Max. Fluid Temp.: 160 degrees F.
• Inlet Ports (2): 3/4" BSP
• Discharge Ports (2): 3/8" BSP
• Drive Side: Standard right
• Forged brass head & valve covers
• Plungers are extra thick solid ceramic titanium impregnated for extended seal and pump life
• Weight: 34.0 lb.

• Triplex Plunger Pump
• Solid Shaft for Belt or Gear Drive
• Max. Volume: 7.0 GPM
• Max. Discharge Pressure: 4,000 PSI
• Max. Pump Speed: 1750 RPM
• Shaft Diameter: 24mm Solid
• Max. Horsepower Requirements: 17.0 BHP
• Bearings are premium SKF tapered roller bearings that provide extra load support, smoother and lower crankcase running temperatures and overall extended pump life
• Max. Fluid Temp.: 160 degrees F.
• Inlet Ports (2): 3/4" BSP
• Discharge Ports (2): 3/8" BSP
• Drive Side: Left
• Forged brass head & valve covers
• Plungers are extra thick solid ceramic titanium impregnated for extended seal and pump life
• Weight: 34.0 lb.

• Triplex Plunger Pump
• Solid Shaft for Belt or Gear Drive
• Max. Volume: 5.55 GPM
• Max. Discharge Pressure: 4,060 PSI
• Max. Pump Speed: 1450 RPM
• Shaft Diameter: 24mm Solid
• Max. Horsepower Requirements: 15.0 BHP
• Bearings are premium SKF tapered roller bearings that provide extra load support, smoother and lower crankcase running temperatures and overall extended pump life
• Max. Fluid Temp.: 160 degrees F.
• Inlet Ports (2): 3/4" BSP
• Discharge Ports (2): 3/8" BSP
• Drive Side: Standard right
• Forged brass head & valve covers
• Plungers are extra thick solid ceramic titanium impregnated for extended seal and pump life
• Weight: 34.0 lb.

Annovi Reverberi / AR North America RTX60 Triplex Plunger Pump. The RTX60 delivers up to 14.0 GPM and 4,350 PSI. Spinning at 1,450 RPM, this 30mm sold shafted pump features a nickel plated brass head. Inlet thread is 1” F and discharge thread is 1/2”F.

Features:
• High-strength, non-porous pressed nickel-plated brass head for guaranteed safety and durability
• One-piece extra thick ceramic pistons for exceptional strength
• Stainless steel ball-type intake and delivery valves with high fluido-dynamic efficiency
• Dual sealing system with anti-extrusion ring support and lubrication with low pressure recirculation chambers
• Pump casing in high-strength aluminum alloy with oversized mounts
• Camshaft in forged, treated steel
• Oversized two-piece connecting-rods in low-friction aluminum alloy
• “Premium” quality tapered roller bearings for long lifetime
• Splash lubrication

Specifications:
• Max. Volume: 14.0 GPM
• Max. Discharge Pressure: 4,350 PSI
• Max. Pump Speed: 1,450 RPM
• Shaft Diameter: 30mm Solid
• Max. Horsepower Requirements: 41.8 EBHP
• Max. Fluid Temp.: 140° F.
• Inlet Tread: 1" Female
• Outlet Thread: 1/2" Female
• Oil capacity: 76 oz
• Weight: 72.0 lb.

• Triplex Plunger Pump
• Solid Shaft for Belt or Gear Drive · Max. Volume: 3.96 GPM
• Max. Discharge Pressure: 4,350 PSI
• Max. Pump Speed: 1450 RPM
• Shaft Diameter: 24mm Solid
• Maximum Horsepower Requirements: 12.0 BHP
• Bearings are premium SKF tapered roller bearings that provide extra load support, smoother and lower crankcase running temperatures and overall extended pump life
• Max. Fluid Temp.: 160 degrees F.
• Inlet Ports (2): 3/4" BSP
• Discharge Ports (2): 3/8" BSP
• Drive Side: Standard right
• Forged brass head & valve covers
• Plungers are extra thick solid ceramic titanium impregnated for extended seal and pump life
• Weight: 34.0 lb.

Annovi Reverberi / AR North America RTX30 Triplex Plunger Pump. The RTX30 delivers up to 7.9 GPM and 4,350 PSI. Spinning at 1,450 RPM, this 30mm sold shafted pump features a nickel plated brass head. Inlet thread is 1” F and discharge thread is 1/2”F.

Features:
• High-strength, non-porous pressed nickel-plated brass head for guaranteed safety and durability
• One-piece extra thick ceramic pistons for exceptional strength
• Stainless steel ball-type intake and delivery valves with high fluido-dynamic efficiency
• Dual sealing system with anti-extrusion ring support and lubrication with low pressure recirculation chambers
• Pump casing in high-strength aluminum alloy with oversized mounts
• Camshaft in forged, treated steel
• Oversized two-piece connecting-rods in low-friction aluminum alloy
• “Premium” quality tapered roller bearings for long lifetime
• Splash lubrication

Specifications:
• Max. Volume: 7.9 GPM
• Max. Discharge Pressure: 4,350 PSI
• Max. Pump Speed: 1,450 RPM
• Shaft Diameter: 30mm Solid
• Max. Horsepower Requirements: 23.6 EBHP
• Max. Fluid Temp.: 140° F.
• Inlet Tread: 1" Female
• Outlet Thread: 1/2" Female
• Oil capacity: 76 oz
• Weight: 72.0 lb.

Comet FW2 4040 S Solid Shaft Pump for Belt or Gear Drive. The FWS2 is the newest addition to comet’s industrial series of pumps

Features:
• Reversible Crankcase for Easy Right or Left Hand Mounting
• Hardened Stainless Steel Piston Guides
• Highly Efficient Stainless Steel Check Valves
• NEW ceramic plungers, thicker wall to help prevent thermal shock
• Solid Ceramic Plungers
• High & Low Pressure Seals: High Quality Buna-Textile Packings
• Additional Anti-Extrusion Ring under the Seal
• Solid Brass Manifold
• Special Forged Brass Oversized Connecting Rods
• Die-Cast, Anodized Aluminum Crankcase
• High Quality Tapered Roller Bearings

Specifications:
• Max. Volume: 4.0 GPM
• Max. Discharge Pressure: 4,000 PSI
• Solid Shaft for Belt or Gear Drive
• Max. Pump Speed: 1,450 RPM
• Shaft Diameter: 24mm Solid
• Max. Horsepower Requirements: 14.55 GHP
• Inlet Port: 1/2" FPT
• Discharge Port: 3/8" FPT
• Replaces Comet # 6410.0700.00
• Weight: 19.4 lb

Comet FWS2 5040 S Solid Shaft Pump for Belt or Gear Drive. The FWS2 is the newest addition to comet’s industrial series of pumps

Features:
• Reversible Crankcase for Easy Right or Left Hand Mounting
• Hardened Stainless Steel Piston Guides
• Highly Efficient Stainless Steel Check Valves
• NEW ceramic plungers, thicker wall to help prevent thermal shock
• Solid Ceramic Plungers
• High & Low Pressure Seals: High Quality Buna-Textile Packings
• Additional Anti-Extrusion Ring under the Seal
• Solid Brass Manifold
• Special Forged Brass Oversized Connecting Rods
• Die-Cast, Anodized Aluminum Crankcase
• High Quality Tapered Roller Bearings

Specifications:
• Max. Volume: 5.0 GPM
• Max. Discharge Pressure: 4,000 PSI
• Solid Shaft for Belt or Gear Drive
• Max. Pump Speed: 1,750 RPM
• Shaft Diameter: 24mm Solid
• Max. Horsepower Requirements: 18.18 GHP
• Inlet Port: 1/2" FPT
• Discharge Port: 3/8" FPT
• Replaces Comet # 6411.1200.00
• Weight: 19.6 lb

3,500 PSI 4.0 GPM General TSS1511 Solid Shaft Pump Made Ready W/ PULSAR4KHPEZ EZ Start Unloader. Pump is ready to use right out of the box

PUMP:
• General TSS1511 Pump with 24MM solid shaft
• Max. Volume: 4.0 GPM
• Max. Discharge Pressure: 3,500 PSI
• Max. Pump Speed: 1,450 RPM
• Shaft Diameter: 24mm Solid
• Max. Horsepower Requirements: 13.0 GHP
• Max. Fluid Temp.: 165º F
• Forged brass manifold with an exclusive lifetime warranty
• Large-capacity, die-cast, anodized aluminum oil-bath crankcase
• Over-sized connecting rods for maximum life
• Solid ceramic plungers with continuously lubricated packings
• Unitized stainless steel inlet and discharge valves
• Designed for suction applications
• Manifold with fine thread valve caps

COMPONENTS:
• General TSS1511 Triplex Plunger Pump
• PULSAR4KHPEZ EZ Start Unloader 4,050 PSI, 10 GPM
• Thermal relief valve
• 3/8” Hose Barb and Clamp Keeps Hose Secure and Sealed
• 3/4” Garden Hose Inlet Fitting with 1/4” Side Port
• 3/8” QC brass socket Installed and 3/8” QC Plug Included
• Mounting rails included
• Note: Pumps are not tested prior to shipping and unloader will need to be adjusted
• Weight: 35.55 lb

• Comet Premium RW 4040 S Series Triplex Plunger Pump
• Solid Shaft 24mm for Belt Drive, Gearbox or Flex Couplers
• Crankcase: Die-Cast Aluminum Alloy for Protection Against Corrosion
• Piston Guides are Heat Treated Stainless Steel
• Highly Efficient Stainless Steel Check Valves
• Solid Ceramic Plungers
• Brass Manifold: Forged for Maximum Strength and Longer Life up to 4000 PSI
• One Piece, Solid Bronze Alloy Connection Rods
• High Quality Tapered Roller Bearings
• Large 25 oz oil Capacity Dissipates Heat and Improves Lubrication for Longer Life
• Oil Cap: New Travel/Working Oil Cap
• Max. Volume: 4.0 GPM
• Max. Discharge Pressure: 4,000 PSI
• Max. Pump Speed: 1450 RPM
• Shaft Diameter: 24mm Solid
• Max. Fluid Temp.: 145º F.
• Inlet Ports (2): 1/2" FPT
• Discharge Ports (2): 3/8" FPT
• Drive Side: Right hand standard
• Replaces Comet # 6517.1400.00
• Weight: 27.0 lb.

• Comet Premium RW 5535 S Series Triplex Plunger Pump
• Solid Shaft 24mm for Belt Drive, Gearbox or Flex Couplers
• Crankcase: Die-Cast Aluminum Alloy for Protection Against Corrosion
• Piston Guides are Heat Treated Stainless Steel
• Highly Efficient Stainless Steel Check Valves
• Solid Ceramic Plungers
• Brass Manifold: Forged for Maximum Strength and Longer Life up to 4000 PSI
• One Piece, Solid Bronze Alloy Connection Rods
• High Quality Tapered Roller Bearings
• Large 25 oz oil Capacity Dissipates Heat and Improves Lubrication for Longer Life
• Oil Cap: New Travel/Working Oil Cap
• Max. Volume: 5.5 GPM
• Max. Discharge Pressure: 3,500 PSI
• Max. Pump Speed: 1450 RPM
• Shaft Diameter: 24mm Solid
• Max. Fluid Temp.: 145º F.
• Inlet Ports (2): 1/2" FPT
• Discharge Ports (2): 3/8" FPT
• Drive Side: Right hand standard
• Replaces Comet # 6517.1300.00
• Weight: 27.0 lb.