Annovi Reverberi - AR North America

Annovi Reverberi / AR North America SJV 3G31-1, SJV3G27D-EZ Axial Radial Pump with East Start. This AR SJV series pump is designed for medium duty loads. It spins at 3400 RPM in a direct drive system coupled with a gasoline engine, the matching flange provides convenient connections to most 3/4” shaft 3.5 - 6.5 HP engines. Precision die-cast crankcase with large cooling fins for maximum heat dissipation. Seals and V-Packings designed to continuously lubricate for extended life. Built-in unloader to optimize performance while reducing setup time. Integral trap pressure, easy start and fixed chemical injection

Specifications
• Axial Cam Pump with Easy Start is smooth starting
• Horizontal Mount Direct Drive with Gas Flange 3-8.5 HP SAE (2-9/16 center to center)
• Max. Volume: 3.0 GPM
• Max. Discharge Pressure: 3,100 PSI
• Max. Pump Speed: 3,400 RPM
• Shaft Diameter: 3/4” Hollow
• Maximum Horsepower Requirements: 8.45 GHP
• Max. Fluid Temp.: 140º F.
• Inlet Port: 1/2" Male
• Discharge Port: 3/8" Male
• Auxiliary Port: 1/4" Female
• Built In unloader and chemical injector
• Forged brass head & valve covers
• Replaces SJV3G27D-F7, SJV 3G27D & Troy Bilt # SJV 3G27-1
• Solid ceramic plungers
• Weight: 11.0 lb.

 

This Annovi Reverberi / AR North America RSV3G31D-F25EZ series pumps are designed to direct drive on gasoline engines ranging from 5 – 6.5 h.p. Intended use for medium to heavy tasks; this triplex plunger pump features the latest in design and technology. Life tested over 500 hours at maximum performance. The RSV is a result of our combined 60 years of pumps building experience and expertise

Features
• Triplex pump with Easy Start is smooth starting
• Features a compact and efficient intergraded unloader valve and fixed chemical injector
• Thermal relief valve included at no cost
• Built In easy start valve
• Forged brass head & valve covers
• Ceramic coated stainless steel plungers
• Direct drive with 4 bolt gas mounting flange

Specifications
• Max. Volume: 3.0 GPM
• Max. Discharge Pressure: 3,100 PSI
• Max. Pump Speed: 3,400 RPM
• Shaft Diameter: 3/4” Hollow
• Max. Horsepower Requirements: 8.45 GHP
• Max. Fluid Temp.: 140° F.
• Inlet Port: 3/8" FPT
• Outlet Port: 3/8" Male NPT
• Oil capacity: 16 oz
• AKA: RSV3G30D-F25EZ
• Weight: 14.0 lb.

 

Annovi Reverberi / AR North America RKV4.5G32D-F24 pump. RKV D Version with F24 flange series pumps are designed to direct drive on gasoline engines ranging from 8 -13 HP.

Specifications:
• Max. Volume: 4.5 GPM
• Max. Discharge Pressure: 3,200 PSI
• Max. Pump Speed: 3,400 RPM
• Shaft Diameter: 1” Hollow
• Max. Horsepower Requirements: 13.5 GHP
• Max. Fluid Temp.: 140° F.
• Drive Side: Standard right
• Forged brass head & valve covers
• Solid ceramic plungers
• Inlet Ports (2): 1/2" Female
• Discharge Ports (2): 3/8" Female
• Weight: 21.0 lb.

 

This Annovi Reverberi / AR North America RSV series pumps are designed to direct drive on gasoline engines ranging from 8 – 13 h.p. Intended use for medium to heavy tasks; this triplex plunger pump features the latest in design and technology. Life tested over 500 hours at maximum performance. The RSV is a result of our combined 60 years of pumps building experience and expertise

Features
• Features a compact and efficient intergraded unloader valve and fixed chemical injector
• Thermal relief valve included at no cost
• Forged brass head & valve covers
• Ceramic coated stainless steel plungers
• Direct drive with 4 bolt gas mounting flange

Specifications
• Max. Volume: 3.0 GPM
• Max. Discharge Pressure: 3,400 PSI
• Max. Pump Speed: 3,400 RPM
• Shaft Diameter: 1” Hollow
• Max. Horsepower Requirements: 9.3 GHP
• Max. Fluid Temp.: 140° F.
• Inlet Port: 3/8" FPT
• Outlet Port: 3/8" Male NPT
• Oil capacity: 16 oz
• Weight: 14.0 lb.

• Triplex Plunger Pump
• Solid Shaft for Belt or Gear Drive
• Max. Volume: 8.0 GPM
• Max. Discharge Pressure: 3,500 PSI
• Max. Pump Speed: 1750 RPM
• Shaft Diameter: 24mm Solid
• Max. Horsepower Requirements: 18.0 BHP
• Bearings are premium SKF tapered roller bearings that provide extra load support, smoother and lower crankcase running temperatures and overall extended pump life
• Max. Fluid Temp.: 160 degrees F.
• Inlet Ports (2): 3/4" BSP
• Discharge Ports (2): 3/8" BSP
• Drive Side: Standard right
• Forged brass head & valve covers
• Plungers are extra thick solid ceramic titanium impregnated for extended seal and pump life
• Weight: 34.0 lb.

Annovi Reverberi / AR North America RRV D Version with F24 flange series pumps are designed to direct drive on gasoline engines ranging from 8 – 13.0 h.p. Intended use for heavy tasks; this triplex plunger pump features the latest in design and technology. Life tested over 2,000 hours at maximum performance. The RRV is a result of our combined 60 years of pumps building experience and expertise

Features:
• Latest in design and technology
• New crankcase style
• High strength forged brass manifold for long term use
• NEW ceramic plungers, thicker wall to help prevent thermal shock
• Stainless steel valves
• Side mount valve seat o-rings
• High quality high pressure seals
• NEW low pressure seal with built in scraper
• Two piece piston guides
• NEW connecting rod with 12% more load surface
• Large side cover sight glass
• Oversized bearings
• Rear cover oil drain
• Forged, precision ground crankshaft

Specifications:
• Max. Volume: 3.0 GPM
• Max. Discharge Pressure: 3,600 PSI
• Max. Pump Speed: 3,400 RPM
• Shaft Diameter: 1” Hollow
• Max. Horsepower Requirements: 9.82 GHP
• Max. Fluid Temp.: 140° F.
• Inlet Ports (2): 1/2" Female
• Outlet Ports (2): 3/8" Female
• Oil capacity: 13.35 oz
• Weight: 18.0 lb.

Annovi Reverberi / AR North America RRV D Version with F24 flange series pumps are designed to direct drive on gasoline engines ranging from 8 – 13.0 h.p. Intended use for heavy tasks; this triplex plunger pump features the latest in design and technology. Life tested over 2,000 hours at maximum performance. The RRV is a result of our combined 60 years of pumps building experience and expertise

Features:
• Latest in design and technology
• New crankcase style
• High strength forged brass manifold for long term use
• NEW ceramic plungers, thicker wall to help prevent thermal shock
• Stainless steel valves
• Side mount valve seat o-rings
• High quality high pressure seals
• NEW low pressure seal with built in scraper
• Two piece piston guides
• NEW connecting rod with 12% more load surface
• Large side cover sight glass
• Oversized bearings
• Rear cover oil drain
• Forged, precision ground crankshaft

Specifications:
• Max. Volume: 3.5 GPM
• Max. Discharge Pressure: 3,600 PSI
• Max. Pump Speed: 3,400 RPM
• Shaft Diameter: 1” Hollow
• Max. Horsepower Requirements: 11.45 GHP
• Max. Fluid Temp.: 140° F.
• Inlet Ports (2): 1/2" Female
• Outlet Ports (2): 3/8" Female
• Oil capacity: 13.35 oz
• Weight: 18.0 lb.

Annovi Reverberi / AR North America RR HN Version with 24mm solid shaft series pumps are designed to belt drive or gear drive on gas engines and belt drive or flange coupling on electric motors. Intended use for heavy tasks; this triplex plunger pump features the latest in design and technology. Life tested over 2,000 hours at maximum performance. The RR is a result of our combined 60 years of pumps building experience and expertise

Features:
• Latest in design and technology
• New crankcase style
• High strength nickel plated forged brass manifold for long term use
• NEW ceramic plungers, thicker wall to help prevent thermal shock
• Stainless steel valves
• Side mount valve seat o-rings
• High quality high pressure seals
• NEW low pressure seal with built in scraper
• Two piece piston guides
• NEW connecting rod with 12% more load surface
• Large side cover sight glass
• Oversized bearings
• Rear cover oil drain
• Forged, precision ground crankshaft

Specifications:
• Max. Volume: 3.96 GPM
• Max. Discharge Pressure: 3,600 PSI
• Max. Pump Speed: 1,450 RPM
• Shaft Diameter: 24mm Solid
• Max. Horsepower Requirements: 10.0 EBHP
• Max. Fluid Temp.: 140° F.
• Inlet Ports (2): 1/2" Female
• Outlet Ports (2): 3/8" Female
• Oil capacity: 13.35 oz
• Weight: 17.0 lb.

Annovi Reverberi / AR North America RG 21.25HN pump with 24mm solid shaft. RG series pumps are designed for use on heavy duty cleaning units and industrial systems. Can be coupled to various types of motors, directly or with flexible joint

 

Features:
• Nickel Plated forged brass pump head, designed for strength
• Intake and delivery valves with larger water passages
• Extra-thick ceramic pistons for greater durability
• Double gasket sealing system
• Double lip oil seals
• Pump body and cover in die-cast aluminum alloy
• Side cover with incorporate oil sight glass
• Rear cover with oil drain outlet
• Top quality, oversize tapered roller bearings
• Oversize shaft with long end section for better torque transmission
• Oversized connecting-rods in a special low-friction alloy
• Oversize, ground pistons for smoother stroke and better oil-tightness

 

Specifications:
• Max. Volume: 5.5 GPM
• Max. Discharge Pressure: 3,600 PSI
• Max. Pump Speed: 1,450 RPM
• Shaft Diameter: 24mm Solid
• Max. Horsepower Requirements: 18.0 GHP
• Max. Fluid Temp.: 140° F.
• Inlet Ports (2): 1/2" Female
• Outlet Ports (2): 3/8" Female
• Oil capacity: 32.0 oz
• Note: Item for sale is PUMP ONLY as shown in picture and does not include unloader which is required for proper operation
• Weight: 27.5 lb.

• Triplex Plunger Pump
• Solid Shaft for Belt or Gear Drive
• Max. Volume: 6.87 GPM
• Max. Discharge Pressure: 3,600 PSI
• Max. Pump Speed: 1450 RPM
• Shaft Diameter: 24mm Solid
• Max. Horsepower Requirements: 16.76 BHP
• Bearings are premium SKF tapered roller bearings that provide extra load support, smoother and lower crankcase running temperatures and overall extended pump life
• Max. Fluid Temp.: 160 degrees F.
• Inlet Ports (2): 3/4" BSP
• Discharge Ports (2): 3/8" BSP
• Drive Side: Standard right
• Forged brass head & valve covers
• Plungers are extra thick solid ceramic titanium impregnated for extended seal and pump life
• Weight: 34.0 lb.

• Triplex Plunger Pump XW3025N
• Solid Shaft for Belt or Gear Drive
• Max. Volume: 7.92 GPM
• Max. Discharge Pressure: 3,600 PSI
• Max. Pump Speed: 1450 RPM
• Shaft Diameter: 24mm Solid
• Max. Horsepower Requirements: 19.0 BHP
• Bearings are premium SKF tapered roller bearings that provide extra load support, smoother and lower crankcase running temperatures and overall extended pump life
• Max. Fluid Temp.: 160 degrees F.
• Inlet Ports (2): 3/4" BSP
• Discharge Ports (2): 3/8" BSP
• Drive Side: Standard right
• Forged brass head & valve covers
• Plungers are extra thick solid ceramic titanium impregnated for extended seal and pump life
• Weight: 34.0 lb.

Annovi Reverberi / AR North America RKV4G37D-F24VR35 pump with bolt-on unloader. RKV D Version with F24 flange series pumps are designed to direct drive on gasoline engines ranging from 8 -13 HP.

Specifications:
• Max. Volume: 4.0 GPM
• Max. Discharge Pressure: 3,700 PSI
• Max. Pump Speed: 3,400 RPM
• Shaft Diameter: 1” Hollow
• Max. Horsepower Requirements: 13.5 GHP
• Max. Fluid Temp.: 140° F.
• Drive Side: Standard right
• Forged brass head & valve covers
• Solid ceramic plungers
• Unloader Inlet: 1/2" MPT
• Unloader Outlet: 3/8" MPT
• Weight: 23.0 lb.

Package Components:
• RKV4G37D-F24 pump
• VR35 Adjustable unloader

Annovi Reverberi / AR North America RTJ70 Triplex Plunger Pump. The new RTJ Series of pumps from AR North America are designed for high-pressure industrial washing applications. They are constructed of cast iron bodies and feature a forged brass head with a threaded style sight glass in the rear cover made of metal. Internal components include special solid ceramic plungers for long life and durability. Oversized premium tapered roller bearings and the precision supports assure proper shaft alignment and maximum life. Valve cages of special designed Ultra-Form provide positive seating and extended life. Two-piece connecting rods are bronze material oversized for strength and load disbursement. These pumps are designed for belt drive systems, with a 35mm solid crankshaft.

Specifications
• Max. Volume: 18.5 GPM
• Max. Discharge Pressure: 4,000 PSI
• Max. Pump Speed: 1,000 RPM
• Shaft Diameter: 35mm Solid
• Maximum Horsepower Requirements: 50.8 EBHP
• Max. Fluid Temp.: 140º F.
• Inlet Port: 1-1/2" Female
• Discharge Port: 1" Female
• Drive Side: Standard right
• Weight: 198.0 lb.
• Ship via truck

• Triplex Plunger Pump
• Replaces XMV3.5G30D-F24 & XMV3.5G25D-F24
• Direct Drive with Gas Flange 7-11 HP SAE
• Max. Volume: 3.5 GPM
• Max. Discharge Pressure: 4,000 PSI
• Max. Pump Speed: 3400 RPM
• Shaft Diameter: 1” Hollow
• Maximum Horsepower Requirements: 12.73 GHP
• Max. Fluid Temp.: 160 degrees F.
• Inlet Ports (2): 1/2" BSP
• Discharge Ports (2): 3/8" BSP
• Drive Side: Standard right
• Forged brass head & valve covers
• Solid ceramic plungers
• Weight: 16.0 lb.

• Triplex Plunger Pump
• Direct Drive with Electric Flange NEMA 182-184TC
• Max. Volume: 3.5 GPM
• Max. Discharge Pressure: 4,000 PSI
• Max. Pump Speed: 1750 RPM
• Shaft Diameter: 1 1/8” Hollow
• Minimum Horsepower Requirements: 9.6 BHP
• Max. Fluid Temp.: 160 degrees F.
• Inlet Ports (2): 1/2" BSP
• Discharge Ports (2): 3/8" BSP
• Drive Side: Standard right
• Nickel Plated forged brass head & valve covers
• Solid ceramic plungers
• Weight: 22.0 lb

• Triplex Plunger Pump
• Direct Drive with Gas Flange 7-18 HP SAE
• Max. Volume: 3.5 GPM
• Max. Discharge Pressure: 4,000 PSI
• Max. Pump Speed: 3400 RPM
• Shaft Diameter: 1” Hollow
• Maximum Horsepower Requirements: 12.8 GHP
• Max. Fluid Temp.: 160 degrees F.
• Inlet Ports (2): 1/2" BSP
• Discharge Ports (2): 3/8" BSP
• Drive Side: Standard right
• Nickel Plated forged brass head & valve covers
• Solid ceramic plungers
• Replaces RKV3.5G35D-F24
• Weight: 25.0-27.0 lb.

Annovi Reverberi / AR North America RKA N Version Pump with 24mm solid shaft and 1,750 RPM. Used in a wide variety of high pressure washing applications. These pumps are designed for gearbox , belt drive, or coupling drive systems driven by electric motor or gasoline driven systems, gasoline engine driven systems

Features
• They are constructed of die-cast bodies and feature a nickel plated forged brass head
• Internal components include special thick solid ceramic plungers for long life and durability
• Precision cast cooling fins are anodized for maximum heat dissipation
• Oversized tapered roller bearings and the precision supports assure proper shaft alignment and maximum life
• Valve cages of special designed Ultra-Form provide positive seating and extended life
• One-piece connecting rods are oversized for strength and load disbursement

Specifications
• Max. Volume: 3.5 GPM
• Max. Discharge Pressure: 4,000 PSI
• Max. Pump Speed: 1,750 RPM
• Shaft Diameter: 24mm Solid
• Maximum Horsepower Requirements: 12.73 GHP (Industrial Grade)
• Max. Fluid Temp.: 140º F.
• Inlet Ports (2): 1/2" FPT
• Discharge Ports (2): 3/8" FPT
• Drive Side: Standard right
• Weight: 20.0 lb.
• Replaces RKA3.5G30HN

This Annovi Reverberi / AR North America RSV series pumps are designed to direct drive on gasoline engines ranging from 8 – 13 h.p. Intended use for medium to heavy tasks; this triplex plunger pump features the latest in design and technology. Life tested over 500 hours at maximum performance. The RSV is a result of our combined 60 years of pumps building experience and expertise

Features
• Features a compact and efficient intergraded unloader valve and fixed chemical injector
• Thermal relief valve included at no cost
• Forged brass head & valve covers
• Ceramic coated stainless steel plungers
• Direct drive with 4 bolt gas mounting flange

Specifications
• Max. Volume: 3.5 GPM
• Max. Discharge Pressure: 4,000 PSI
• Max. Pump Speed: 3,400 RPM
• Shaft Diameter: 1” Hollow
• Max. Horsepower Requirements: 12.73 GHP
• Max. Fluid Temp.: 140° F.
• Inlet Port: 3/8" FPT
• Outlet Port: 3/8" Male NPT
• Oil capacity: 16 oz
• Weight: 14.0 lb.

Annovi Reverberi / AR North America RK N Version Pump with 24mm solid shaft and 1,450 RPM. Used in a wide variety of high pressure washing applications. These pumps are designed for gearbox , belt drive, or coupling drive systems driven by electric motor or gasoline driven systems, gasoline engine driven systems

Features
• They are constructed of die-cast bodies and feature a nickel plated forged brass head
• Internal components include special thick solid ceramic plungers for long life and durability
• Precision cast cooling fins are anodized for maximum heat dissipation
• Oversized tapered roller bearings and the precision supports assure proper shaft alignment and maximum life
• Valve cages of special designed Ultra-Form provide positive seating and extended life
• One-piece connecting rods are oversized for strength and load disbursement

Specifications
• Max. Volume: 3.96 GPM
• Max. Discharge Pressure: 4,000 PSI
• Max. Pump Speed: 1,450 RPM
• Shaft Diameter: 24mm Solid
• Maximum Horsepower Requirements: 11.0 EBHP
• Max. Fluid Temp.: 140º F.
• Inlet Ports (2): 1/2" FPT
• Discharge Ports (2): 3/8" FPT
• Drive Side: Standard right
• Weight: 20.0 lb.

Annovi Reverberi / AR North America RG 15.28HN pump with 24mm solid shaft. RG series pumps are designed for use on heavy duty cleaning units and industrial systems. Can be coupled to various types of motors, directly or with flexible joint

 

Features:
• Nickel Plated forged brass pump head, designed for strength
• Intake and delivery valves with larger water passages
• Extra-thick ceramic pistons for greater durability
• Double gasket sealing system
• Double lip oil seals
• Pump body and cover in die-cast aluminum alloy
• Side cover with incorporate oil sight glass
• Rear cover with oil drain outlet
• Top quality, oversize tapered roller bearings
• Oversize shaft with long end section for better torque transmission
• Oversized connecting-rods in a special low-friction alloy
• Oversize, ground pistons for smoother stroke and better oil-tightness

Specifications:
• Max. Volume: 3.96 GPM
• Max. Discharge Pressure: 4,000 PSI
• Max. Pump Speed: 1,450 RPM
• Shaft Diameter: 24mm Solid
• Max. Horsepower Requirements: 14.4 GHP
• Max. Fluid Temp.: 140° F.
• Inlet Ports (2): 1/2" Female
• Outlet Ports (2): 3/8" Female
• Oil capacity: 32.0 oz
• Note: Item for sale is PUMP ONLY as shown in picture and does not include unloader which is required for proper operation
• Weight: 27.5 lb.