Delavan Fluid Power

Delavan PowerMAX™ PML2508-112ASAE 2.5" x 8" x 1.125" Hydraulic Cylinder. This ASAE Certified Tie-Rod Cylinder has 2,500 PSI Working Pressure and NPT Ports. Delavan PowerMax Hydraulic Cylinders are designed and manufactured to meet the most demanding requirements.

Features:
• Chromed, polished and individually heat-treated shaft provides extended cylinder life
• Built tough enough to stand up to the roughest conditions
• Pins and retainers: high tensile steel, zinc plated to prevent corrosion, comes with cotter pin retainers
• Ports: double ported NPTF for greater flexibility of assembly, unless otherwise stated, cylinders assembled with ports inline
• Piston nut: heavy duty automation grade self locking piston nut holds piston in place under high cycle loading
• Piston: ductile iron, precision machined providing a malleable bearing surface for extended cylinder life
• Piston seal: 90 durometer O-ring with anti extrusion back up washers provide sealing under high load conditions
• Tie-rods: high tensile steel to prevent failure under high pressure
• Cylinder shaft: high strength, hard chrome plated shaft provides extended cylinder life in harsh applications
• Tube: precision finished skive and burnished heavy wall steel tubing for extended seal and cylinder life
• Rod seal: Premium Double Lip Polyurethane BS profile using a double lip design for leak-free performance throughout the pressure range and longer life expectancy
• Rod cap and clevis cap: ductile iron comes with drilled oil passages, offering increased bearing surface for high shock and side load applications
• Rod wiper: Polyurethane AN or D Style provides a tough/hard material to remove contaminants from shaft surface
• Threaded shaft: (on ASAE cylinders) to accept optional mechanical stroke control (not applicable to 5 "bore cylinders)
• Rod clevis: ductile iron able to withstand continuous high load without wear or fracture
• All cylinders are 100% hydraulically tested up to 1.5 working pressure

Specifications:
• Bore: 2.5”
• Stroke: 8”
• Rod Diameter: 1.125”
• Working Pressure: 2,500 PSI
• Pin to Pin Center Retracted x Extended: 20-1/4” x 28-1/4”
• Clevis Pin Diameter: 1”
• Port Size: 3/8” FNPT
• Max Rated PSI on Full Extension: Full PSI
• Max Rated Column Load on Full Extension: 12,272 Lbs
• Packaging: Small box
• Warranty: 3 Years from date of purchase
• Weight: 21.6 lbs

Delavan PowerMAX™ PML2008-112ASAE 2" x 8" x 1.125" Hydraulic Cylinder. This ASAE Certified Tie-Rod Cylinder has 2,500 PSI Working Pressure and NPT Ports. Delavan PowerMax Hydraulic Cylinders are designed and manufactured to meet the most demanding requirements.

Features:
• Chromed, polished and individually heat-treated shaft provides extended cylinder life
• Built tough enough to stand up to the roughest conditions
• Pins and retainers: high tensile steel, zinc plated to prevent corrosion, comes with cotter pin retainers
• Ports: double ported NPTF for greater flexibility of assembly, unless otherwise stated, cylinders assembled with ports inline
• Piston nut: heavy duty automation grade self locking piston nut holds piston in place under high cycle loading
• Piston: ductile iron, precision machined providing a malleable bearing surface for extended cylinder life
• Piston seal: 90 durometer O-ring with anti extrusion back up washers provide sealing under high load conditions
• Tie-rods: high tensile steel to prevent failure under high pressure
• Cylinder shaft: high strength, hard chrome plated shaft provides extended cylinder life in harsh applications
• Tube: precision finished skive and burnished heavy wall steel tubing for extended seal and cylinder life
• Rod seal: Premium Double Lip Polyurethane BS profile using a double lip design for leak-free performance throughout the pressure range and longer life expectancy
• Rod cap and clevis cap: ductile iron comes with drilled oil passages, offering increased bearing surface for high shock and side load applications
• Rod wiper: Polyurethane AN or D Style provides a tough/hard material to remove contaminants from shaft surface
• Threaded shaft: (on ASAE cylinders) to accept optional mechanical stroke control (not applicable to 5 "bore cylinders)
• Rod clevis: ductile iron able to withstand continuous high load without wear or fracture
• All cylinders are 100% hydraulically tested up to 1.5 working pressure

Specifications:
• Bore: 2”
• Stroke: 8”
• Rod Diameter: 1.125”
• Working Pressure: 2,500 PSI
• Pin to Pin Center Retracted x Extended: 20-1/4” x 28-1/4”
• Clevis Pin Diameter: 1”
• Port Size: 3/8” FNPT
• Max Rated PSI on Full Extension: Full PSI
• Max Rated Column Load on Full Extension: 7,854 Lbs
• Packaging: Small box
• Warranty: 3 Years from date of purchase
• Weight: 17.3 lbs

• Delavan Lower Housing Assembly
• Works with Delavan 7871 & 7971 FB3 series pumps

• Delavan Lower Housing Assembly
• Works with Delavan 7822 & 7823 series pumps
• Note: Does not work with I-Series pumps
• Includes diaphragm, pistons, cam and bearing

• Delavan Lower Housing Assembly
• Works with Delavan 7802 & 7812 series pumps
• Includes diaphragm, pistons, cam and bearing
• Note: Does not work with I-Series pumps
• Replaces LHA7863-7F77

Delavan 50-126 Aluminum Heat Sink. Fits all 4" Diameter Delavan motors

Specifications:
• Snap-fit heat sinks will reduce motor heat up to 30%
• Works with Delavan 7870, 7970, 7871, 7971, FB2 & FB3 series pumps
• Help to extend the available run time of the pump as well as increase motor life
• Heat sinks are made of extruded aluminum with a clear finish
• Overall Dimensions: 3.75” L x 5.0” W x 3.44” H
• Replaces 50-125
• Net Weight: 0.50 Lbs.

Delavan 50-076 Aluminum Heat Sink. Fits all 3" Diameter Delavan motors

Specifications:
• Snap-fit heat sinks will reduce motor heat up to 30%
• Works with Delavan 7801, 7802, 7811, 7812, 7822, 5800 & 5900 series 3-chamber/5-chamber pumps
• Help to extend the available run time of the pump as well as increase motor life
• Heat sinks are made of extruded aluminum with a clear finish
• Overall Dimensions:5.0” L x 3.75” W x 2.56” H
• Replaces 50-075
• Net Weight:0.55 Lbs.

Delavan 137-014 HD Magnum Shaft to suit M150 & M200 Pumps

Delavan 134-014 HD Magnum Shaft to suit M125 Pump

Delavan RK-M215VS HD Magnum Repair Kit for M150 & M200 Silicon Carbide

Specifications:
• SILICONE Includes Seal Assembly for M150/M200, Viton/Silicon, Frame O-ring Seal, Square Key

Delavan RK-M215VC HD Magnum Repair Kit for M150 & M200 Ceramic

Specifications:
• CERAMIC Includes Seal Assembly for M150/M200, Viton/Ceramic, Frame O-ring Seal, Square Key

Delavan RK-M125VS HD Magnum Repair Kit for M125 Silicon Carbide

Specifications:
• SILICONE Includes Seal Assembly for M125, Viton/Silicon, Frame O-ring Seal, 3/16" Square Key

Delavan RK-M125VC HD Magnum Repair Kit for M125 Ceramic

Specifications:
• CERAMIC Includes Seal Assembly for M150/M200, Viton/Ceramic, Frame O-ring Seal, Square Key

Delavan 35745 HD Magnum Repair Kit (Old Style)

Specifications:
• Old Style Delavan Centrifugal Pump Repair Kits For centrifugal pump models 34945-1 and 35566-1.
• Kit contains Viton/ceramic seal, gasket, hardware, and instructions

Delavan Replacement Handle Kit for KOV30-NPT Kick-Off Valve

Included In Kit:
• Grip, Black (1)
• Control Lever (1)
• Clevis Pin (1)
• Chain Link (1)
• Cotter Pin (1)
• Screw (2)
• Washer (2)
• Handle Bracket (1)
• Seal Retainer (1)
• Weight: 1.20 lbs

Delavan 7972-111E-SB PowerFLO™ Double Pump FB6 Series 10.0 GPM 70 PSI Diaphragm Pump with 3/4” Quick Attach Ports. Bypass Design – Continuous operation.

Features:
• The all new FB6 Double Pump is Delavan Fluid Power’s newest and strongest HIGH VOLUME diaphragm pump on the market
• Double Sided Design Engineered for Extreme Flow and up to 3x Longer Life
• High Torque Motor for Industry Leading Flow at Pressure
• Heavy Duty Reinforced Diaphragm Extends Pump Life in Demanding Applications
• Self-priming
• Life tested at 40 psi to over 1,500 hours
• Multiple intake/ output options for custom solutions - Can intake fluids from 1 or 2 separate sources, Output can be separate or combined
• Can be run dry for priming, but cannot operate 1 side onIy for extended periods
• Made in the USA
• 100% Factory tested
• 2 Year warranty from date of purchase

Motor:
• Volts: 12 VDC
• Amps: 20 Cont / 38 Surge
• Type: Permanent magnet, totally enclosed, non-ventilated
• Leads: 12 AWG, 6” long
• Recommended Wire is 12 AWG
• Recommended Fuse size is 40 Amp

Materials of Construction:
• Motor Shell: Coated Steel
• Housing: Polypropylene
• Valves: Santoprene
• Diaphragm: Santoprene/Stainless Steel
• Fasteners: Stainless Steel

Pump:
• Bypass Design – Continuous operation with internal bypass
• Type: 5-chamber positive displacement
• Liquid Temperature: 140° F Max.
• Priming Capabilities: 14’
• Open Flow: 10.0 GPM
• Pressure Setting: 70 PSI
• Inlet/Outlet Ports: 3/4” Quick Attach
• Heat sink recommended (Part # 50-126)
• Packaging: Small box
• Weight: 12.5 lbs

Delavan 7971-104E-SB PowerFLO™ Advanced FB3 Series 115/120VAC 7.0 GPM 60 PSI Diaphragm Pump with 3/4” Quick Attach Ports. Demand Switch – Operates only when liquid flow is required.

Features:
• FB3 pumps are Delavan’s new advanced 115/120VAC smooth running, five chamber diaphragm pumps that features Extended Pump Life and Improved Performance
• The FB3 is the most advanced, high flow 115/120VAC pump on the market, built with quality components, such as stainless fasteners, and high torque motors standard
• The new diaphragm retaining system allows the pump to maintain its flow for longer hours of operation in demanding applications
• The FB3 pumps feature Santoprene diaphragms and valves, to handle the FB3 pumps’ higher flow rates
• The FB3 pump uses a heavy duty demand switch system that extends the life of the pump by turning it off when not in use
• Like all Delavan diaphragm pumps, this heavy duty pump can run dry and will self-prime
• Made in the USA
• 100% Factory tested
• 2 Year warranty from date of purchase

Motor:
• Type: 115/120VAC Totally enclosed, non-ventilated
• Power Cord: 6’ with plug
• Amps: 1.5 Max

Materials of Construction:
• Motor Shell: Coated Steel
• Housing: Polypropylene
• Valves: Santoprene
• Diaphragm: Santoprene/Stainless Steel
• Fasteners: Stainless Steel

Pump:
• Demand Switch – Operates only when liquid flow is required
• Type: 5-chamber positive displacement
• Capable of being run dry
• Excellent self-priming capability
• Liquid Temperature: 140° F Max.
• Priming Capabilities: 14’
• Max. Flow: 7.0 GPM
• Pressure Shut-Off: 60 PSI
• Inlet/Outlet Ports: 3/4” Quick Attach
• Packaging: Small box
• Weight: 10.15 lbs

Delavan 7871-104E-SB PowerFLO™ Advanced FB3 Series 115/120VAC 7.0 GPM 60 PSI Diaphragm Pump with 1/2” FNPT Ports. Demand Switch – Operates only when liquid flow is required.

Features:
• FB3 pumps are Delavan’s new advanced 115/120VAC smooth running, five chamber diaphragm pumps that features Extended Pump Life and Improved Performance
• The FB3 is the most advanced, high flow 115/120VAC pump on the market, built with quality components, such as stainless fasteners, and high torque motors standard
• The new diaphragm retaining system allows the pump to maintain its flow for longer hours of operation in demanding applications
• The FB3 pumps feature Santoprene diaphragms and valves, to handle the FB3 pumps’ higher flow rates
• The FB3 pump uses a heavy duty demand switch system that extends the life of the pump by turning it off when not in use
• Like all Delavan diaphragm pumps, this heavy duty pump can run dry and will self-prime
• Made in the USA
• 100% Factory tested
• 2 Year warranty from date of purchase

Motor:
• Type: 115/120VAC Totally enclosed, non-ventilated
• Leads: 6’ Power cord with plug
• Amps: 1.5 Max

Materials of Construction:
• Motor Shell: Coated Steel
• Housing: Polypropylene
• Valves: Santoprene
• Diaphragm: Santoprene/Stainless Steel
• Fasteners: Stainless Steel

Pump:
• Demand Switch – Operates only when liquid flow is required
• Type: 5-chamber positive displacement
• Capable of being run dry
• Excellent self-priming capability
• Liquid Temperature: 140° F Max.
• Priming Capabilities: 14’
• Max. Flow: 7.0 GPM
• Pressure Shut-Off: 60 PSI
• Inlet/Outlet Ports: 1/2” FNPT
• Packaging: Small box
• Weight: 10.15 lbs