General Pump

General Pump 100723 6,000 PSI Safety Relief Valve 3/8” MPT-N with 1/4” Hose Barb. This safety relief valve is a manually adjustable pressure-operated device which, according to its setting releases the excess of water when the pressure inside the pump/system exceeds the adjusted value, thus reducing the pressure. The normal working conditions can be restored by turning off and then restarting the system

Features:
• High pressure safety valve: 2,500 – 6,000 PSI relief pressure
• One model fits all pressures - no springs to change
• Less “whistling” and chatter than competing brands
• Highly accurate over full range of pressures
• Fits any brand of pump
• Designed and made in the USA

Specifications:
• Adjustable Range: 2,500 - 6,000 PSI
• Max Volume: 6 GPM
• Discharge: Side
• Hose Barb: 1/4”
• Max Temperature: 32 - 150° F
• Inlet: 3/8" NPT-M
• Body Dimensions: 2.6” x .875” Hex
• Weight: 0.325 lbs

General Pump 100722 6,000 PSI Safety Relief Valve 1/2” MPT-N with 1/4” Hose Barb. This safety relief valve is a manually adjustable pressure-operated device which, according to its setting releases the excess of water when the pressure inside the pump/system exceeds the adjusted value, thus reducing the pressure. The normal working conditions can be restored by turning off and then restarting the system

Features:
• High pressure safety valve: 2,500 – 6,000 PSI relief pressure
• One model fits all pressures - no springs to change
• Less “whistling” and chatter than competing brands
• Highly accurate over full range of pressures
• Fits any brand of pump
• Designed and made in the USA

Specifications:
• Adjustable Range: 2,500 - 6,000 PSI
• Max Volume: 6 GPM
• Discharge: Side
• Hose Barb: 1/4”
• Max Temperature: 32 - 150° F
• Inlet: 1/2" NPT-M
• Body Dimensions: 2.6” x .875” Hex
• Weight: 0.325 lbs

General Pump 100729 6,000 PSI Safety Relief Valve 1/2” MPT-N. This safety relief valve is a manually adjustable pressure-operated device which, according to its setting releases the excess of water when the pressure inside the pump/system exceeds the adjusted value, thus reducing the pressure. The normal working conditions can be restored by turning off and then restarting the system

Features:
• High pressure safety valve: 2,500 – 6,000 PSI relief pressure
• One model fits all pressures - no springs to change
• Less “whistling” and chatter than competing brands
• Highly accurate over full range of pressures
• Fits any brand of pump
• Designed and made in the USA

Specifications:
• Adjustable Range: 2,500 - 6,000 PSI
• Max Volume: 6 GPM
• Discharge: End
• Max Temperature: 32 - 150° F
• Inlet: 1/2" NPT-M
• Dimensions: 2.6” x .875” Hex
• Weight: 0.325 lbs

General Pump 25° x #4.0 S-Style Spray Nozzle 1/8” NPT-M

Features
• 5,000 PSI operating pressure
• Made in the USA
• General Pump High Pressure Spray Tips feature a two piece design
• Inserts are through hardened and pressed into a 303 stainless steel rust-resistant body for improved durability
• The contour control nozzle chamber eliminates the need for flow straighteners
• Resistant to most chemical
• Laser marked for clarity and durability

Specifications
• Tip Angle: 25°
• Nozzle Size: 4.0
• Operating Pressure: 5,000 PSI
• Connection: 1/8” NPT-M
• Weight: 0.05 oz

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

General Pump DSN14F Steam Nozzle Blank 1/4" NPT-F, Drill to Size

Features:
• Strong brass construction
• Drill to size
• Multi-step expansion chamber
• BEFORE USE, DRILL ORIFICE TO RECOMMENDED NOZZLE SIZE!
• DO NOT TOUCH OR REMOVE WHEN HOT!

Specifications:
• Maximum Operating Pressure: 1,450 PSI
• Inlet Port: 1/4” NPT-F
• Material: Brass
• Dimensions 0.75” Hex x 2.6” Long
• Cross Reference: 373702. 7102217, 87109570
• Weighs 0.20 lbs

1/4” SJNR General Pump # 3.0 Rotating Sewer Jet Nozzle 5,000 PSI.

Features
• Side ports impact the sides of the pipe
• Polishes and maximizes line recovery
• Rear facing nozzles advance hose through pipe
• Heat-treated Stainless Steel nozzles are wear and corrosion resistant
• Great for pipe, sewer and drain cleaning
• Compact design allows for maneuverability and cornering within pipes
• High pressure nozzles are sized to match the flow and pressure specifications of the equipment
• Works best on 2" to 4" Pipes

Specifications
• Nozzle Size: # 3.0
• Material: Stainless steel & Brass
• Maximum Pressure: 5,000 PSI
• Inlet: 1/4” NPT-F
• Outside Diameter (O.D.): .67”
• Length: 1.34”
• Weight: 1.4 oz

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

1/4” SJNR General Pump # 3.5 Rotating Sewer Jet Nozzle 5,000 PSI.

Features
• Side ports impact the sides of the pipe
• Polishes and maximizes line recovery
• Rear facing nozzles advance hose through pipe
• Heat-treated Stainless Steel nozzles are wear and corrosion resistant
• Great for pipe, sewer and drain cleaning
• Compact design allows for maneuverability and cornering within pipes
• High pressure nozzles are sized to match the flow and pressure specifications of the equipment
• Works best on 2" to 4" Pipes

Specifications
• Nozzle Size: # 3.5
• Material: Stainless steel & Brass
• Maximum Pressure: 5,000 PSI
• Inlet: 1/4” NPT-F
• Outside Diameter (O.D.): .67”
• Length: 1.34”
• Weight: 1.4 oz

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

1/4” SJNR General Pump # 4.0 Rotating Sewer Jet Nozzle 5,000 PSI.

Features
• Side ports impact the sides of the pipe
• Polishes and maximizes line recovery
• Rear facing nozzles advance hose through pipe
• Heat-treated Stainless Steel nozzles are wear and corrosion resistant
• Great for pipe, sewer and drain cleaning
• Compact design allows for maneuverability and cornering within pipes
• High pressure nozzles are sized to match the flow and pressure specifications of the equipment
• Works best on 2" to 4" Pipes

Specifications
• Nozzle Size: # 4.0
• Material: Stainless steel & Brass
• Maximum Pressure: 5,000 PSI
• Inlet: 1/4” NPT-F
• Outside Diameter (O.D.): .67”
• Length: 1.34”
• Weight: 1.4 oz

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

1/4” SJNR General Pump # 5.5 Rotating Sewer Jet Nozzle 5,000 PSI.

Features
• Side ports impact the sides of the pipe
• Polishes and maximizes line recovery
• Rear facing nozzles advance hose through pipe
• Heat-treated Stainless Steel nozzles are wear and corrosion resistant
• Great for pipe, sewer and drain cleaning
• Compact design allows for maneuverability and cornering within pipes
• High pressure nozzles are sized to match the flow and pressure specifications of the equipment
• Works best on 2" to 4" Pipes

Specifications
• Nozzle Size: # 5.5
• Material: Stainless steel & Brass
• Maximum Pressure: 5,000 PSI
• Inlet: 1/4” NPT-F
• Outside Diameter (O.D.): .67”
• Length: 1.34”
• Weight: 1.4 oz

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

1/4” SJNR General Pump # 6.0 Rotating Sewer Jet Nozzle 5,000 PSI.

Features
• Side ports impact the sides of the pipe
• Polishes and maximizes line recovery
• Rear facing nozzles advance hose through pipe
• Heat-treated Stainless Steel nozzles are wear and corrosion resistant
• Great for pipe, sewer and drain cleaning
• Compact design allows for maneuverability and cornering within pipes
• High pressure nozzles are sized to match the flow and pressure specifications of the equipment
• Works best on 2" to 4" Pipes

Specifications
• Nozzle Size: # 6.0
• Material: Stainless steel & Brass
• Maximum Pressure: 5,000 PSI
• Inlet: 1/4” NPT-F
• Outside Diameter (O.D.): .67”
• Length: 1.34”
• Weight: 1.4 oz

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

3/8” SJNR General Pump # 4.5 Rotating Sewer Jet Nozzle 5,000 PSI.

Features
• Side ports impact the sides of the pipe
• Polishes and maximizes line recovery
• Rear facing nozzles advance hose through pipe
• Heat-treated Stainless Steel nozzles are wear and corrosion resistant
• Great for pipe, sewer and drain cleaning
• Compact design allows for maneuverability and cornering within pipes
• High pressure nozzles are sized to match the flow and pressure specifications of the equipment

Specifications
• Nozzle Size: # 4.5
• Material: Stainless steel & Brass
• Maximum Pressure: 5,000 PSI
• Inlet: 3/8” NPT-F
• Outside Diameter (O.D.): .87”
• Length: 1.42”
• Weight: 1.8 oz

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

3/8” SJNR General Pump # 5.5 Rotating Sewer Jet Nozzle 5,000 PSI.

Features
• Side ports impact the sides of the pipe
• Polishes and maximizes line recovery
• Rear facing nozzles advance hose through pipe
• Heat-treated Stainless Steel nozzles are wear and corrosion resistant
• Great for pipe, sewer and drain cleaning
• Compact design allows for maneuverability and cornering within pipes
• High pressure nozzles are sized to match the flow and pressure specifications of the equipment

Specifications
• Nozzle Size: # 5.5
• Material: Stainless steel & Brass
• Maximum Pressure: 5,000 PSI
• Inlet: 3/8” NPT-F
• Outside Diameter (O.D.): .87”
• Length: 1.42”
• Weight: 1.8 oz

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

3/8” SJNR General Pump # 6.0 Rotating Sewer Jet Nozzle 5,000 PSI.

Features
• Side ports impact the sides of the pipe
• Polishes and maximizes line recovery
• Rear facing nozzles advance hose through pipe
• Heat-treated Stainless Steel nozzles are wear and corrosion resistant
• Great for pipe, sewer and drain cleaning
• Compact design allows for maneuverability and cornering within pipes
• High pressure nozzles are sized to match the flow and pressure specifications of the equipment

Specifications
• Nozzle Size: # 6.0
• Material: Stainless steel & Brass
• Maximum Pressure: 5,000 PSI
• Inlet: 3/8” NPT-F
• Outside Diameter (O.D.): .87”
• Length: 1.42”
• Weight: 1.8 oz

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

3/8” SJNR General Pump # 3.5 Rotating Sewer Jet Nozzle 5,000 PSI.

Features
• Side ports impact the sides of the pipe
• Polishes and maximizes line recovery
• Rear facing nozzles advance hose through pipe
• Heat-treated Stainless Steel nozzles are wear and corrosion resistant
• Great for pipe, sewer and drain cleaning
• Compact design allows for maneuverability and cornering within pipes
• High pressure nozzles are sized to match the flow and pressure specifications of the equipment

Specifications
• Nozzle Size: # 3.5
• Material: Stainless steel & Brass
• Maximum Pressure: 5,000 PSI
• Inlet: 3/8” NPT-F
• Outside Diameter (O.D.): .87”
• Length: 1.42”
• Weight: 1.8 oz

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

General TS1811 Triplex Plunger Pump 3,500 PSI 4.5 GPM 1,450 RPM / 3,500 PSI 4.0 GPM 1,290 RPM / 3,500 PSI 5.0 GPM 1,610 RPM

Features:
• The preferred pump frame in the pressure cleaning industry
• Forged brass manifold with an exclusive lifetime warranty
• Large capacity, die-cast, anodized aluminum oil-bath crankcase
• Over-sized connecting rods for maximum life
• Heavy-duty tapered roller bearing
• Solid ceramic plungers with continuously lubricated packings
• Unitized stainless steel inlet and discharge valves
• Available in left-handed “L” version

Specifications:
• Series 47 Triplex Plunger Pump
• Solid Shaft for Belt or Gear Drive
• Max. Volume: 4.5 / 4.0 / 5.0 GPM
• Max. PSI: 3,500
• Max. Pump Speed: 1,450 / 1,290 / 1,610 RPM
• Shaft Diameter: 24mm Solid
• Max. Fluid Temp.: 165° F.
• Inlet Ports (2): 1/2-14 BSPP-F
• Discharge Ports (2): 3/8- BSPP-F
• Drive Side: Standard right
• Note: Item for sale is PUMP ONLY as shown in picture and does not include unloader which is required for proper operation
• Weight: 32.0 lb.

General Pump 100323 5,000 PSI Easy Start Valve 3/8” NPT-M Inlet & 1/4” Hose Barb. Eases system start-up. Especially useful for engine-driven pressure washers

Features:
• Fits any brand pump
• Max working pressure of 5,000 PSI
• Designed and made in the USA
• Long-life construction
• Improved seal design limits leaks

Specifications:
• Maximum Pressure: 5,000 PSI
• Max Volume: 8 GPM
• Maximum Temperature: 195° F
• Inlet: 3/8" NPT-M
• Outlet: 1/4” Hose Barb
• Materials: Brass, Stainless Steel, Thermoplastic
• Weight: 0.25 lbs

General Pump 100544 5,000 PSI Easy Start Valve 3/8” NPT-M Inlet & 1/8” NPT-F Outlet. Eases system start-up. Especially useful for engine-driven pressure washers

Features:
• Fits any brand pump
• Max working pressure of 5,000 PSI
• Designed and made in the USA
• Long-life construction
• Improved seal design limits leaks

Specifications:
• Maximum Pressure: 5,000 PSI
• Max Volume: 8 GPM
• Maximum Temperature: 195° F
• Inlet: 3/8" NPT-M
• Outlet: 1/8” NPT-F
• Materials: Brass, Stainless Steel, Thermoplastic
• Weight: 0.25 lbs