General Pump

General EPHT18132S Triplex EPHT Series 1,750 RPM Solid Shaft Plunger Pump with High-temp Seals.

Features:
• Features patented “high tech” packings:
    -dynamic low-pressure seal retainer
    -superior low-pressure seal
    -innovative intermediate ring
    -superior high-pressure seal
• Nickel-plated manifold
• New forged brass manifold , increases working pressure to 4,000 PSI
• New plunger guide bushing (patent pending)
• Solid ceramic plungers with dual guide system
• New dual diameter plunger guide
• New optimized outlet valves
• New dual lip oil seal

Specifications Sheet

Specifications:
• Solid Shaft for Belt or Gear Drive
• Max. Volume: 3.4 GPM
• Max. Discharge Pressure: 2,465 PSI
• Horsepower: 5.7 EBHP
• Max. Pump Speed: 1,750 RPM
• Oil Capacity: 14 oz
• Max. Fluid Temp.: 185 degrees F.
• Inlet Port Thread: 1/2”-14 BSP-F
• Discharge Port Thread: 3/8”-19 BSP-F
• Shaft Diameter: .945 in./24 mm
• Dimensions – Nominal: 9.5” x 8.38” x 5.1”
• Rail kit part # ZFEETEVO
• Replaces HTXS1813S
• Weight: 18.0 lb.

General Pump D10118 2 Way Steel Unloader Mounting Block, 3/8" NPT-F x 3/8" NPT-F, Bolt-down

Features:
• Mounting blocks provide flexibility to mount additional accessories to your system

Specifications Sheet

Specifications:
• Max Pressure: 5,500 PSI
• Material: Steel, with YZD Finish

General Pump D10127 2 Way Steel Unloader Mounting Block, 1/2" NPT-F x 1/2" NPT-F, Bolt-down

Features:
• Mounting blocks provide flexibility to mount additional accessories to your system

Specifications Sheet

Specifications:
• Max Pressure: 5,000 PSI
• Material: Steel, with YZD Finish

• Triplex Plunger Pump
• Solid Shaft for Belt or Gear Drive
• Max. Volume: 4.75 GPM
• Max. Discharge Pressure: 1,800 PSI
• Max. Pump Speed: 1450 RPM
• Shaft Diameter: 24mm Solid
• Max. Horsepower Requirements: 8.0 GHP
• Max. Fluid Temp.: 165 degrees F.
• Inlet Ports (2): 1/2" BSP
• Discharge Ports (2): 3/8" BSP
• Drive Side: Standard right
• Forged brass head & valve covers
• Solid ceramic plungers
• Weight: 30.0 lb.

General Pump DCFSCP18GZ 18" Hammerhead Professional Flat Surface Cleaner. The gun has a revolutionary compensating design to reduce fatigue. The cleaner glides easily across the surface uniformly cleaning pool decks, sidewalks, garage floors and more

FEATURES
• Compensating gun feature
• Full 18” cleaning path
• Heavy-duty anodized aluminum components
• Rugged ABS cover
• Swivel has grease zerk fitting for bearing lubrication
• Two Stainless Steel bearings for better performance
• Stainless Steel inlet filter for water filtration
• Supplied with 2-nozzle rotating arm
• Note: Caster Kit Not Included (Optional Caster Kit: P/N 2100200 available)

SPECIFICATIONS
• Max Flow: 8 GPM
• Operating Pressure: 1,000 – 4,000 PSI
• Max. Temp.: 180° F
• Nozzles: 925020M (2)
• Trigger Gun Inlet: 3/8" NPT-F
• Dimensions-Retracted 70”x18.3”x18.3”
• Shipping Weight 19 lbs

• Triplex Plunger Pump
• Solid Shaft for Belt or Gear Drive
• Max. Volume: 3.43 GPM
• Max. Discharge Pressure: 1,500 PSI
• Max. Pump Speed: 2800 RPM
• Shaft Diameter: 24mm Solid
• Max. Horsepower Requirements: 3.0 BHP
• Max. Fluid Temp.: 165 degrees F.
• Inlet Ports (2): 3/8" BSP
• Discharge Ports (2): 1/4" BSP
• Drive Side: Standard right
• Forged brass head & valve covers
• Solid ceramic plungers
• Weight: 11.2 lb.

• Triplex Plunger Pump
• Solid Shaft for Belt or Gear Drive
• Max. Volume: 3.0 GPM
• Max. Discharge Pressure: 1,500 PSI
• Max. Pump Speed: 1750 RPM
• Shaft Diameter: 24mm Solid
• Max. Horsepower Requirements: 3.0 BHP
• Max. Fluid Temp.: 165 degrees F.
• Inlet Ports (2): 3/8" BSP
• Discharge Ports (2): 1/4" BSP
• Drive Side: Standard right
• Forged brass head & valve covers
• Solid ceramic plungers
• Weight: 11.2 lb.

• Triplex Plunger Pump
• Solid Shaft for Belt or Gear Drive
• Max. Volume: 2.9 GPM
• Max. Discharge Pressure: 1,500 PSI
• Max. Pump Speed: 2800 RPM
• Shaft Diameter: 24mm Solid
• Max. Horsepower Requirements: 2.5 BHP
• Max. Fluid Temp.: 165 degrees F.
• Inlet Ports (2): 3/8" BSP
• Discharge Ports (2): 1/4" BSP
• Drive Side: Standard right
• Forged brass head & valve covers
• Solid ceramic plungers
• Weight: 11.2 lb.

• Triplex Plunger Pump
• Direct Drive with Electric Flange NEMA 56C
• Max. Volume: 2.80 GPM
• Max. Discharge Pressure: 1,500 PSI
• Max. Pump Speed: 3400 RPM
• Shaft Diameter: 5/8” Hollow
• Max. Horsepower Requirements: 3.0 BHP
• Max. Fluid Temp.: 165º degrees F.
• Inlet Ports (2): 3/8" BSP
• Discharge Ports (2): 1/4" BSP
• Drive Side: Standard right
• Forged brass head & valve covers
• Solid ceramic plungers
• Weight: 11.5 lb.

• Triplex Plunger Pump
• Direct Drive with Gas Flange 3.0-6.5 HP SAE
• Max. Volume: 2.80 GPM
• Max. Discharge Pressure: 1,500 PSI
• Max. Pump Speed: 3400 RPM
• Shaft Diameter: 3/4” Hollow
• Max. Horsepower Requirements: 4.0 GHP
• Max. Fluid Temp.: 165 degrees F.
• Inlet Ports (2): 3/8" BSP
• Discharge Ports (2): 1/4" BSP
• Drive Side: Standard right
• Forged brass head
• Solid ceramic plungers
• Weight: 11.4 lb.

• Triplex Plunger Pump
• Solid Shaft for Belt or Gear Drive
• Max. Volume: 2.5 GPM
• Max. Discharge Pressure: 1,500 PSI
• Max. Pump Speed: 2800 RPM
• Shaft Diameter: 24mm Solid
• Max. Horsepower Requirements: 2.5 BHP
• Max. Fluid Temp.: 165 degrees F.
• Inlet Ports (2): 3/8" BSP
• Discharge Ports (2): 1/4" BSP
• Drive Side: Standard right
• Forged brass head & valve covers
• Solid ceramic plungers
• Weight: 11.2 lb.

• Triplex Plunger Pump
• Solid Shaft for Belt or Gear Drive
• Max. Volume: 2.11 GPM
• Max. Discharge Pressure: 1,500 PSI
• Max. Pump Speed: 2800 RPM
• Shaft Diameter: 24mm Solid
• Max. Horsepower Requirements: 2.0 BHP
• Max. Fluid Temp.: 165 degrees F.
• Inlet Ports (2): 3/8" BSP
• Discharge Ports (2): 1/4" BSP
• Drive Side: Standard right
• Forged brass head & valve covers
• Solid ceramic plungers
• Weight: 11.2 lb.

• Triplex Plunger Pump
• Direct Drive with Electric Flange NEMA 56C
• Max. Volume: 2.11 GPM
• Max. Discharge Pressure: 1,500 PSI
• Max. Pump Speed: 3400 RPM
• Shaft Diameter: 5/8” Hollow
• Max. Horsepower Requirements: 2.2 BHP
• Max. Fluid Temp.: 165º degrees F.
• Inlet Ports (2): 3/8" BSP
• Discharge Ports (2): 1/4" BSP
• Drive Side: Standard left
• Forged brass head & valve covers
• Solid ceramic plungers
• Weight: 11.5 lb.

1,500 PSI 2.8 GPM General TT9071EBFUI Direct Couple to Electric Motors (NEMA 56C) with Built In Unloader and Downstrean injector

Features:
• Forged brass manifold with exclusive lifetime warranty
• Die-cast annodized aluminum, oil-bath crankcase
• Solid ceramic plungers with continuously lubricated packings
• The original Interpump unitized, stainless steel, K01 inlet and outlet valves
• Ideal for all general cleaning, RO and misting applications
• Comes standard with NEMA 56C electric motor mounting flange
• Also available in “L” left-handed versions

Specifications:
• Maximum Volume: 2.8 GPM
• Maximum Discharge Pressure: 1,500 PSI
• Maximum Pump Speed: 3,400 RPM
• Maximum Inlet Pressure: 125 PSI
• Oil Capacity: 11.2 oz.
• Maximum Fluid Temperature: 165°F
• Inlet Port Thread: 3/8-19 BSPP-F
• Discharge Port Thread: 1/4-19 BSPP-F
• Shaft Diameter 5/8 in. / 16 mm
• Horespower: 2.9 EBHP
• Weight 12.0 lbs.

1,500 PSI 2.11 GPM General TT9061EBFUI Direct Couple to Electric Motors (NEMA 56C) with Built In Unloader and Downstrean injector

Features:
• Forged brass manifold with exclusive lifetime warranty
• Die-cast annodized aluminum, oil-bath crankcase
• Solid ceramic plungers with continuously lubricated packings
• The original Interpump unitized, stainless steel, K01 inlet and outlet valves
• Ideal for all general cleaning, RO and misting applications
• Comes standard with NEMA 56C electric motor mounting flange
• Also available in “L” left-handed versions

Specifications Sheet

Specifications:
• Maximum Volume: 2.11 GPM
• Maximum Discharge Pressure: 1,500 PSI
• Maximum Pump Speed: 3,400 RPM
• Maximum Inlet Pressure: 125 PSI
• Oil Capacity: 11.2 oz.
• Maximum Fluid Temperature: 165°F
• Inlet Port Thread: 3/8-19 BSPP-F
• Discharge Port Thread: 1/4-19 BSPP-F
• Shaft Diameter 5/8 in. / 16 mm
• Horespower: 2.2 EBHP
• Weight 12.0 lbs.

1,500 PSI 2.11 GPM General TT9061EBF Direct Couple to Electric Motors (NEMA 56C)

Features:
• Forged brass manifold with exclusive lifetime warranty
• Die-cast annodized aluminum, oil-bath crankcase
• Solid ceramic plungers with continuously lubricated packings
• The original Interpump unitized, stainless steel, K01 inlet and outlet valves
• Ideal for all general cleaning, RO and misting applications
• Comes standard with NEMA 56C electric motor mounting flange
• Also available in “L” left-handed versions

Specifications Sheet

Specifications:
• Maximum Volume: 2.11 GPM
• Maximum Discharge Pressure: 1,500 PSI
• Maximum Pump Speed: 3,400 RPM
• Maximum Inlet Pressure: 125 PSI
• Oil Capacity: 11.2 oz.
• Maximum Fluid Temperature: 165°F
• Inlet Port Thread: 3/8-19 BSPP-F
• Discharge Port Thread: 1/4-19 BSPP-F
• Shaft Diameter 5/8 in. / 16 mm
• Horespower: 2.2 EBHP
• Weight 12.0 lbs.

1,500 PSI 2.11 GPM General TT9051EBF Direct Couple to Electric Motors (NEMA 56C)

Features:
• Forged brass manifold with exclusive lifetime warranty
• Die-cast annodized aluminum, oil-bath crankcase
• Solid ceramic plungers with continuously lubricated packings
• The original Interpump unitized, stainless steel, K01 inlet and outlet valves
• Ideal for all general cleaning, RO and misting applications
• Comes standard with NEMA 56C electric motor mounting flange
• Also available in “L” left-handed versions

Specifications Sheet

Specifications:
• Maximum Volume: 2.11 GPM
• Maximum Discharge Pressure: 1,500 PSI
• Maximum Pump Speed: 1,750 RPM
• Maximum Inlet Pressure: 125 PSI
• Oil Capacity: 11.2 oz.
• Maximum Fluid Temperature: 165°F
• Inlet Port Thread: 3/8-19 BSPP-F
• Discharge Port Thread: 1/4-19 BSPP-F
• Shaft Diameter 5/8 in. / 16 mm
• Horespower: 2.2 EBHP
• Weight 12.0 lbs.

General Pump DFSCP12E 12" Flat Surface Cleaner. Use it, along with a power washer, to clean horizontal and vertical surfaces

FEATURES
• Full 12” cleaning path
• Can be connected directly to gun, lance, telescoping wand
• Brass and stainless steel construction
• Durable polypropylene deck
• Supplied with 2-nozzle rotating arm
• Includes a 1/4” plug for connecting to 1/4” quick disconnect

SPECIFICATIONS
• Max Flow: 4 GPM
• Operating Pressure: 1,000 – 3,000 PSI
• Max. PSI: 800
• Max. Temp.: 150° F
• Nozzles: 925020S (2)
• Inlet: Male M22, Yoke/Stem: 14MM (Optional 1/4” QD plug)
• Dimensions: 12” x 5.3”
• Shipping Weight 6.5 lbs

12 Volt DC Variable Speed Controller Rewind Kit, For Use With 2103410 Motor Kit

12 Pack General Pump D10074 Quick Disconnect Coupler Sockets Stainless Steel 3/8” x 3/8" NPT-F 5,000 PSI

Features:
• Quick disconnect design
• 304 Stainless steel
• EPDM O-Ring

Package Contents:
• 12 QD Sockets

Specifications:
• Quick Disconnect Coupler: Socket
• Body Material: 304 Stainless steel
• Socket Size: 3/8"
• Thread: 3/8” NPT-F
• Max Temp: 175°
• Max Operating Pressure: 5,000 PSI
• Weight: 2.52 lb

 

Nominal Thread Size (NPT)	1/8"	1/4"	3/8"	1/2"	3/4"	1"
Actual I.D. Measurement	3/8"	1/2"	5/8"	3/4"	1"	1-3/8"