We accept

Checkout

0
Newsletter

P.A. Srl

Sort by
Display per page

PA VS500 Safety & Pressure Regulating Valve 8,100 PSI

SKU: 60.5200.00


PA VS500 Safety & Pressure Regulating Valve 8,100 PSI. With rated pressures up to 7,250 PSI and flows up to 21.0 GPM


Features:
• Compensated pressure regulating valve
• Regulates the bypass of the fluid with a minimum variation of the pressure
• Suitable to be utilized as a safety valve
• Central body and fittings in brass
• Internal components in Sst
• Moving parts totally protected


AS SAFETY VALVE ONLY FOR PRESSURE WASHERS:
• Secure intervention discharging all the flow
• Prompt and effective damping action against pressure spikes


AS A PRESSURE REGULATING VALVE:
• High balancing to guarantee slight variations of the rated pressure when the flow varies in bypass


Specifications:
• Rated Pressure: 7,250 PSI
• Permissible Pressure: 8,100 PSI
• Rated Temperature: 195° F
• Rated Flow Rate: 21.0 GPM
• Material: Brass and Sst
• Inlet Port: 1/2" F
• Bypass Port: 3/8" F
• AR40399
• Weight: 51.53 Oz

Price: $262.40

Pulsar 4 Unloader Plumbing Kit - 4,000 PSI Max, EZ Start

SKU: 88.0133


PA Pulsar 4 Unloader Plumbing Kit for Pressure Washer Pump with EZ Start– 4,050 PSI Max. This unloader kit has all the components to make installation easy


Specifications:
• Works with pumps that have 1/2” FPT inlet and 3/8” FPT Outlet
• Built-In easy start valve relieves back pressure during engine start up
• Maximum Pressure: 4,050 PSI
• Max. Volume: 10.5 GPM


COMPONENT:
• PA Pulsar 4 Adjustable Unloader Valve 4,050 PSI with EZ Start
• 24” of push-on bypass hose
• 1/4” Male push on fitting
• 3/8” Male push-on fitting
• 3/8M x 3/8M Hex Nipple Steel
• Thermal relief valve protects pump from overheating
• Clear view water inlet filter with garden hose connection
• 3/8” QC socket
• 3/8” QC plug
• Roll of Teflon tape
Note: Pump in 2nd picture is not included and kit may look different than shown in picture
• Unloader Must Be Installed Vertically For Proper Operation

• Weight: 5 lb

 

Price: $85.34

Pulsar 4 Unloader Plumbing Kit - 4,000 PSI Max, EZ Start, Safety Relief

SKU: 88.0135


PA Pulsar 4 Unloader Plumbing Kit for Pressure Washer Pump with Safety Relief and EZ Start– 4,050 PSI Max. This unloader kit has all the components to make installation easy


Specifications:
• Works with pumps that have 1/2” FPT inlet and 3/8” FPT Outlet
• Safety relief vale protects equipment and people with adjustable “Pop Off” protection
• Built-In easy start valve relieves back pressure during engine start up
• Maximum Pressure: 4,050 PSI
• Max. Volume: 10.5 GPM


COMPONENT:
• PA Pulsar 4 Adjustable Unloader Valve 4,050 PSI with EZ Start
• Safety pressure relief valve with adjustable range: 1,000 - 6,000 PSI
• 3/8” Steel street elbow
• 24” of push-on bypass hose
• 1/4” Male push on fitting
• 3/8” Male push-on fitting
• 3/8M x 3/8M Hex Nipple Steel
• Thermal relief valve protects pump from overheating
• Clear view water inlet filter with garden hose connection
• 3/8” QC socket
• 3/8” QC plug
• Roll of Teflon tape
Note: Pump in 2nd picture is not included and kit may look different than shown in picture
• Unloader Must Be Installed Vertically For Proper Operation

• Weight: 5 lb

 

Price: $101.49

Repair Kit, RL204

SKU: 30.4046.24
Repair Kit, RL204
Price: $162.40

RL124 Trigger Gun 1,950 PSI, 32 GPM

SKU: 30.5300.00


PA RL124 Heavy Duty High Volume Spray Gun 1,950 PSI 32 GPM


Features
• Covered by shockproof plastic semi-housings
• Seat and ball in Sst
• Entirely built of Sst and body in brass
• Ergonomic construction
• Minimum fatigue for trigger opening
• Minimum load loss (see chart)
• No fluid passage upon trigger release


Specifications
• Rated Pressure: 1,750 PSI
• Permissible Pressure: 1,950 PSI
• Max Flow: 32.0 GPM
• Rated Temp: 210° F.
• Inlet: 1/2" Female
• Outlet: 1/2" Female
• General Part #: YG1732
• Weight: 45.15 oz

 

Price: $111.68

RL84 31.5" Stainless Steel Lance 1/2" 8100 PSI

SKU: 30.5000.80

Matching High Pressure Stainless Steel Lance & Holder for RL 84 & 80 Big Guns. Complete with adjustable handle


Specifications
• Length: 31.5”
• Permissible Pressure: 8,100 PSI
• Rated Pressure: 7,250 PSI
• Rated Flow Rate: 53.0 GPM
• Rated Temperature: 109° F
• Inlet: 1/2" Male
• Outlet: 1/4" Female NPT(nozzle holder)
• AR North America # AR40404
• Weight: 52.5 oz

Price: $152.00

RL84 50" Stainless Steel Lance 1/2" 8100 PSI

SKU: 30.5000.92

Matching High Pressure Stainless Steel Lance & Holder for RL 84 & 80 Big Guns. Complete with adjustable handle


Specifications
• Length: 50”
• Permissible Pressure: 8,100 PSI
• Rated Pressure: 7,250 PSI
• Rated Flow Rate: 53.0 GPM
• Rated Temperature: 109° F
• Inlet: 1/2" Male
• Outlet: 1/4" Female NPT(nozzle holder)
• AR North America # AR40405
• Weight: 76.4 oz

Price: $268.13

S6 - RL600 31.5" Stainless Steel Lance 3/8" 9,570 PSI

SKU: 40.0160.80

S6 – RL600 High Pressure Stainless Steel Lance for RL 600 trigger gun. Complete with side handle


Specifications
• Length: 31.5”
• Permissible Pressure: 9,500 PSI
• Rated Pressure: 8,700 PSI
• Rated Flow Rate: 15.8 GPM
• Rated Temperature: 210° F
• Inlet: 3/8 Male
• Outlet: 1/4" Female NPT(nozzle holder)
• AR North America # AR40402
• Weight: 42.9 oz

Price: $131.42

S6 - RL600 47.3" Stainless Steel Lance 3/8" 9,570 PSI

SKU: 40.0160.12

S6 – RL600 High Pressure Stainless Steel Lance for RL 600 trigger gun. Complete with side handle


Specifications
• Length: 47.3”
• Permissible Pressure: 9,500 PSI
• Rated Pressure: 8,700 PSI
• Rated Flow Rate: 15.8 GPM
• Rated Temperature: 210° F
• Inlet: 3/8 Male
• Outlet: 1/4" Female NPT(nozzle holder)
• AR North America # AR40403
• Weight: 60.5 oz

Price: $173.75

Turbine, PA UR25 & UR32

SKU: 25163122
Turbine, PA UR25 & UR32
Price: $13.13