We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.
Learn more
Low Prices
Fast Shipping!
SINCE 1991
Ag Spraying Equipment, Hoses,Pressure Washers, Sewer Jetters,
Water Pumps & More
- CATEGORIES
Shop By Category
- Auto & Truck Detailing
- Clamps
- Coupling & Quick Disconnects
- Facility Cleaning & Maintenance
- Filters & Strainers
- Fittings - Brass, Nylon, Polypropylene & Steel
- Gauges
- Hose & Tubing
- Hose Reels & Hangers
- Hydraulic Cylinders & Accessories
- Hydro Excavation
- LP-Gas, Nat Gas, RV's & Campers
- Pressure Washer
- Pumps
- Repair Kits & Parts
- Sewer Cleaning
- Soft Wash Units & Accessories
- Sprayers, Accessories & Parts
- Swivels
- Tools
- Valves
- BRANDS
- SHIPPING QUOTE
- ABOUT
- GENERAL INFORMATION
- CONTACT US
Suttner America
Sort by
Display
per page
Suttner ST-36 Sludge Pump (04.0) w/ 15' Hose, 1/4" QC
SKU: 999QC1540
Suttner ST-36 Sludge Pump (04.0) w/ 15' Hose, 1/4" QC Inlet. Attaches to pressure washer and turns it into a high output pump. Great for flood cleanup, car wash pits, draining pools or chemical spills
Features
• Water flowing through the high pressure nozzle creates a powerful venturi suction that vacuums up slurry solutions
• Debris as large as 3/4” will pass through the casting and out the discharge hose
• Vacuums up liquid slurries at a ratio of about 1:11 Example: Using 4 GPM will produce an output of 44 GPM
• Hose barb 1 1/2"
Suttner ST-36 Sludge Pump In Action on YouTube
Specifications
• Nozzle Size: 4.0 (0 degree)
• Flow Rate: 11:1
• Max Pressure: 4,000 PSI
• Hose Length: 15’
• Max Temp: 104° F.
• Inlet: 1/4" Male QC Plug
• Weight: 5.5 lb
Please use Nozzle Chart to determine proper nozzle size
Price: $133.79
Suttner ST-505 SS Vertical Mount Flow Switch 8,700 PSI
SKU: 200505706
Suttner ST-505 Stainless Steel Vertical Mount Flow Switch Rated to 8,700 PSI. Vertical mounting position and free floating brass magnet configuration
Features:
• Vertical mounting ONLY
• Mounts further downstream in pumping system than traditional vacuum switches, thereby minimizing potential leak points that can cause vacuum switches to close
• Easy reed switch replacement
Specifications:
• Max. Pressure: 8,700 PS
• Min. Pressure: 75 PSI
• Max. Flow Rate: 8 GPM
• Min. Flow Rate: 1 GPM
• Max Voltage: 250 V
• Max Current: 3 Amps
• Max: Fluid Temperature: 176° F
• Cable Length: 47.0”
• Inlet & Outlet: 3/8” FNPT
• Housing: Stainless Steel
• Color: Blue
• 3/8” Bonded seal #78888389 is recommended to seal inlet and outlet threads
• Weight: 0.90 lbs
Price: $134.28
Suttner ST-285 Unloader Valve 3,625 PSI 26 GPM 1/2" F
SKU: 200285500
Suttner ST-285 Unloader Valve 3,625 PSI 26 GPM 1/2" F. Suttner unloader valve ST-285 for high flow rates. Particularly durable! High-quality combination of materials
Features:
• Soft switching behavior
• Fatigue-free spring
• Particularly easy to maintain
• Low pressure drop
• Sealing seats in high grade stainless steel and Ceramic ball in bypass
Specifications:
• Max Pressure: 3,625 PSI
• Flow Rate: 26 GPM
• Max Temperature: 194° F
• Inlet Port: 1/2" F
• Outlet Port: 1/2” F
• Bypass Port: 1/2” F
• Weight: 2.10 lbs
Price: $134.60
Suttner ST-3600 20" Stainless Steel Lance 8,700 PSI 1/2"
SKU: 203600400
Suttner St-3600 20” High Pressure Stainless Steel 8,700 PSI Lance with Handle. This 8,700 PSI rated stainless steel lance is the perfect fit for the ST-3600 spray gun. The stainless steel construction is ideal for chemical applications
Features:
• High Quality, German engineered components
• Threads are rolled on providing consistent sealing and four times the strength than cut threads
• Adjustable handle
• Chemical resistant
Specifications:
• Length: 20"
• Pipe Material: Stainless steel
• Inlet: 1/2” Male NPT
• Outlet: 1/4” Female NPT
• Maximum Pressure: 8,700 PSI
• Max. Temp.: 300° F
• Weight: 2.35 lbs.
Price: $136.60
1/4" Suttner #4.0 ST-49 Milling Sewer Nozzle 3 Front 4 Rear 5,076 PSI
SKU: 649010234040
1/4” Suttner #4.0 ST-49 Milling Sewer Cleaning Nozzle. With 3 Front and 4 Rear jets and rated to 5,076 PSI
Features:
• High Quality, German engineered components
• With its 3 very strong concentrated forward jets and the sharp cutting edges the milling type nozzles will tear through almost any kind of blockage
• The sharp edges cut, break and penetrate through every kind of blockage
• Made out of wear-resistant, hardened stainless steel
• Centric jet is plugged
• 3 Lateral front jets 0.5 mm drilled
• 4 Rear jets with nozzle inserts
• Nozzle is equipped with replaceable hardened stainless steel rear and centric front jets
• Due to this feature the efficiency is considerably higher compared with those nozzles with drilled holes and the service life is several times longer
Applications:
• Penetration of completely clogged pipes
• Opening of root masses
• Opening of frozen pipelines
• Hydraulic thrust boring flushing operations
Specifications:
• Nozzle Size: # 4.0
• Material: Stainless steel
• Maximum Pressure: 5,076 PSI
• Inlet: 1/4” Female
• Outside Diameter (O.D.): .95”
• Weight: 2.8 oz
| Nominal Thread Size (NPT) |
1/8"
|
1/4"
|
3/8"
|
1/2"
|
3/4"
|
1"
|
| Actual I.D. Measurement |
3/8"
|
1/2"
|
5/8"
|
3/4"
|
1"
|
1-3/8"
|
Please use Nozzle Chart to determine proper nozzle size
Price: $136.76
1/4" Suttner #5.0 ST-49 Milling Sewer Nozzle 3 Front 4 Rear 5,076 PSI
SKU: 649010234050
1/4” Suttner #5.0 ST-49 Milling Sewer Cleaning Nozzle. With 3 Front and 4 Rear jets and rated to 5,076 PSI
Features:
• High Quality, German engineered components
• With its 3 very strong concentrated forward jets and the sharp cutting edges the milling type nozzles will tear through almost any kind of blockage
• The sharp edges cut, break and penetrate through every kind of blockage
• Made out of wear-resistant, hardened stainless steel
• Centric jet is plugged
• 3 Lateral front jets 0.5 mm drilled
• 4 Rear jets with nozzle inserts
• Nozzle is equipped with replaceable hardened stainless steel rear and centric front jets
• Due to this feature the efficiency is considerably higher compared with those nozzles with drilled holes and the service life is several times longer
Applications:
• Penetration of completely clogged pipes
• Opening of root masses
• Opening of frozen pipelines
• Hydraulic thrust boring flushing operations
Specifications:
• Nozzle Size: # 5.0
• Material: Stainless steel
• Maximum Pressure: 5,076 PSI
• Inlet: 1/4” Female
• Outside Diameter (O.D.): .95”
• Weight: 2.8 oz
| Nominal Thread Size (NPT) |
1/8"
|
1/4"
|
3/8"
|
1/2"
|
3/4"
|
1"
|
| Actual I.D. Measurement |
3/8"
|
1/2"
|
5/8"
|
3/4"
|
1"
|
1-3/8"
|
Please use Nozzle Chart to determine proper nozzle size
Price: $136.76
1/4" Suttner #6.0 ST-49 Milling Sewer Nozzle 1 Centric 3 Front 4 Rear 5,076 PSI
SKU: 649010244060
1/4” Suttner #6.0 ST-49 Milling Sewer Cleaning Nozzle. With 1 Centric, 3 Front and 4 Rear jets and rated to 5,076 PSI
Features:
• High Quality, German engineered components
• With its 4 very strong concentrated forward jets and the sharp cutting edges the milling type nozzles will tear through almost any kind of blockage
• The sharp edges cut, break and penetrate through every kind of blockage
• Made out of wear-resistant, hardened stainless steel
• 1 Centric front jet with nozzle insert
• 3 Lateral front jets 0.5 mm drilled
• 4 Rear jets with nozzle inserts
• Nozzle is equipped with replaceable hardened stainless steel rear and centric front jets
• Due to this feature the efficiency is considerably higher compared with those nozzles with drilled holes and the service life is several times longer
Applications:
• Penetration of completely clogged pipes
• Opening of root masses
• Opening of frozen pipelines
• Hydraulic thrust boring flushing operations
Specifications:
• Nozzle Size: # 6.0
• Material: Stainless steel
• Maximum Pressure: 5,076 PSI
• Inlet: 1/4” Female
• Outside Diameter (O.D.): .95”
• Weight: 2.8 oz
| Nominal Thread Size (NPT) |
1/8"
|
1/4"
|
3/8"
|
1/2"
|
3/4"
|
1"
|
| Actual I.D. Measurement |
3/8"
|
1/2"
|
5/8"
|
3/4"
|
1"
|
1-3/8"
|
Please use Nozzle Chart to determine proper nozzle size
Price: $136.76
1/4" Suttner #7.0 ST-49 Milling Sewer Nozzle 1 Centric 3 Front 4 Rear 5,076 PSI
SKU: 649010244070
1/4” Suttner #7.0 ST-49 Milling Sewer Cleaning Nozzle. With 1 Centric, 3 Front and 4 Rear jets and rated to 5,076 PSI
Features:
• High Quality, German engineered components
• With its 4 very strong concentrated forward jets and the sharp cutting edges the milling type nozzles will tear through almost any kind of blockage
• The sharp edges cut, break and penetrate through every kind of blockage
• Made out of wear-resistant, hardened stainless steel
• 1 Centric front jet with nozzle insert
• 3 Lateral front jets 0.5 mm drilled
• 4 Rear jets with nozzle inserts
• Nozzle is equipped with replaceable hardened stainless steel rear and centric front jets
• Due to this feature the efficiency is considerably higher compared with those nozzles with drilled holes and the service life is several times longer
Applications:
• Penetration of completely clogged pipes
• Opening of root masses
• Opening of frozen pipelines
• Hydraulic thrust boring flushing operations
Specifications:
• Nozzle Size: # 7.0
• Material: Stainless steel
• Maximum Pressure: 5,076 PSI
• Inlet: 1/4” Female
• Outside Diameter (O.D.): .95”
• Weight: 2.8 oz
| Nominal Thread Size (NPT) |
1/8"
|
1/4"
|
3/8"
|
1/2"
|
3/4"
|
1"
|
| Actual I.D. Measurement |
3/8"
|
1/2"
|
5/8"
|
3/4"
|
1"
|
1-3/8"
|
Please use Nozzle Chart to determine proper nozzle size
Price: $136.76
1/4" Suttner #8.0 ST-49 Milling Sewer Nozzle 1 Centric 3 Front 4 Rear 5,076 PSI
SKU: 649010244080
1/4” Suttner #8.0 ST-49 Milling Sewer Cleaning Nozzle. With 1 Centric, 3 Front and 4 Rear jets and rated to 5,076 PSI
Features:
• High Quality, German engineered components
• With its 4 very strong concentrated forward jets and the sharp cutting edges the milling type nozzles will tear through almost any kind of blockage
• The sharp edges cut, break and penetrate through every kind of blockage
• Made out of wear-resistant, hardened stainless steel
• 1 Centric front jet with nozzle insert
• 3 Lateral front jets 0.5 mm drilled
• 4 Rear jets with nozzle inserts
• Nozzle is equipped with replaceable hardened stainless steel rear and centric front jets
• Due to this feature the efficiency is considerably higher compared with those nozzles with drilled holes and the service life is several times longer
Applications:
• Penetration of completely clogged pipes
• Opening of root masses
• Opening of frozen pipelines
• Hydraulic thrust boring flushing operations
Specifications:
• Nozzle Size: # 8.0
• Material: Stainless steel
• Maximum Pressure: 5,076 PSI
• Inlet: 1/4” Female
• Outside Diameter (O.D.): .95”
• Weight: 2.8 oz
| Nominal Thread Size (NPT) |
1/8"
|
1/4"
|
3/8"
|
1/2"
|
3/4"
|
1"
|
| Actual I.D. Measurement |
3/8"
|
1/2"
|
5/8"
|
3/4"
|
1"
|
1-3/8"
|
Please use Nozzle Chart to determine proper nozzle size
Price: $136.76
1/4" Suttner #10.0 ST-49 Milling Sewer Nozzle 1 Centric 3 Front 4 Rear 5,076 PSI
SKU: 649010244100
1/4” Suttner #10.0 ST-49 Milling Sewer Cleaning Nozzle. With 1 Centric, 3 Front and 4 Rear jets and rated to 5,076 PSI
Features:
• High Quality, German engineered components
• With its 4 very strong concentrated forward jets and the sharp cutting edges the milling type nozzles will tear through almost any kind of blockage
• The sharp edges cut, break and penetrate through every kind of blockage
• Made out of wear-resistant, hardened stainless steel
• 1 Centric front jet with nozzle insert
• 3 Lateral front jets 0.5 mm drilled
• 4 Rear jets with nozzle inserts
• Nozzle is equipped with replaceable hardened stainless steel rear and centric front jets
• Due to this feature the efficiency is considerably higher compared with those nozzles with drilled holes and the service life is several times longer
Applications:
• Penetration of completely clogged pipes
• Opening of root masses
• Opening of frozen pipelines
• Hydraulic thrust boring flushing operations
Specifications:
• Nozzle Size: # 10.0
• Material: Stainless steel
• Maximum Pressure: 5,076 PSI
• Inlet: 1/4” Female
• Outside Diameter (O.D.): .95”
• Weight: 2.8 oz
| Nominal Thread Size (NPT) |
1/8"
|
1/4"
|
3/8"
|
1/2"
|
3/4"
|
1"
|
| Actual I.D. Measurement |
3/8"
|
1/2"
|
5/8"
|
3/4"
|
1"
|
1-3/8"
|
Please use Nozzle Chart to determine proper nozzle size
Price: $136.76
1/4" Suttner #12.0 ST-49 Milling Sewer Nozzle 1 Centric 3 Front 4 Rear 5,076 PSI
SKU: 649010244120
1/4” Suttner #12.0 ST-49 Milling Sewer Cleaning Nozzle. With 1 Centric, 3 Front and 4 Rear jets and rated to 5,076 PSI
Features:
• High Quality, German engineered components
• With its 4 very strong concentrated forward jets and the sharp cutting edges the milling type nozzles will tear through almost any kind of blockage
• The sharp edges cut, break and penetrate through every kind of blockage
• Made out of wear-resistant, hardened stainless steel
• 1 Centric front jet with nozzle insert
• 3 Lateral front jets 0.5 mm drilled
• 4 Rear jets with nozzle inserts
• Nozzle is equipped with replaceable hardened stainless steel rear and centric front jets
• Due to this feature the efficiency is considerably higher compared with those nozzles with drilled holes and the service life is several times longer
Applications:
• Penetration of completely clogged pipes
• Opening of root masses
• Opening of frozen pipelines
• Hydraulic thrust boring flushing operations
Specifications:
• Nozzle Size: # 12.0
• Material: Stainless steel
• Maximum Pressure: 5,076 PSI
• Inlet: 1/4” Female
• Outside Diameter (O.D.): .95”
• Weight: 2.8 oz
| Nominal Thread Size (NPT) |
1/8"
|
1/4"
|
3/8"
|
1/2"
|
3/4"
|
1"
|
| Actual I.D. Measurement |
3/8"
|
1/2"
|
5/8"
|
3/4"
|
1"
|
1-3/8"
|
Please use Nozzle Chart to determine proper nozzle size
Price: $136.76
1/4" Suttner #15.0 ST-49 Milling Sewer Nozzle 1 Centric 3 Front 4 Rear 5,076 PSI
SKU: 649010244150
1/4” Suttner #15.0 ST-49 Milling Sewer Cleaning Nozzle. With 1 Centric, 3 Front and 4 Rear jets and rated to 5,076 PSI
Features:
• High Quality, German engineered components
• With its 4 very strong concentrated forward jets and the sharp cutting edges the milling type nozzles will tear through almost any kind of blockage
• The sharp edges cut, break and penetrate through every kind of blockage
• Made out of wear-resistant, hardened stainless steel
• 1 Centric front jet with nozzle insert
• 3 Lateral front jets 0.5 mm drilled
• 4 Rear jets with nozzle inserts
• Nozzle is equipped with replaceable hardened stainless steel rear and centric front jets
• Due to this feature the efficiency is considerably higher compared with those nozzles with drilled holes and the service life is several times longer
Applications:
• Penetration of completely clogged pipes
• Opening of root masses
• Opening of frozen pipelines
• Hydraulic thrust boring flushing operations
Specifications:
• Nozzle Size: # 15.0
• Material: Stainless steel
• Maximum Pressure: 5,076 PSI
• Inlet: 1/4” Female
• Outside Diameter (O.D.): .95”
• Weight: 2.8 oz
| Nominal Thread Size (NPT) |
1/8"
|
1/4"
|
3/8"
|
1/2"
|
3/4"
|
1"
|
| Actual I.D. Measurement |
3/8"
|
1/2"
|
5/8"
|
3/4"
|
1"
|
1-3/8"
|
Please use Nozzle Chart to determine proper nozzle size
Price: $136.76
1/4" Suttner #20.0 ST-49 Milling Sewer Nozzle 1 Centric 3 Front 4 Rear 5,076 PSI
SKU: 649010244200
1/4” Suttner #20.0 ST-49 Milling Sewer Cleaning Nozzle. With 1 Centric, 3 Front and 4 Rear jets and rated to 5,076 PSI
Features:
• High Quality, German engineered components
• With its 4 very strong concentrated forward jets and the sharp cutting edges the milling type nozzles will tear through almost any kind of blockage
• The sharp edges cut, break and penetrate through every kind of blockage
• Made out of wear-resistant, hardened stainless steel
• 1 Centric front jet with nozzle insert
• 3 Lateral front jets 0.5 mm drilled
• 4 Rear jets with nozzle inserts
• Nozzle is equipped with replaceable hardened stainless steel rear and centric front jets
• Due to this feature the efficiency is considerably higher compared with those nozzles with drilled holes and the service life is several times longer
Applications:
• Penetration of completely clogged pipes
• Opening of root masses
• Opening of frozen pipelines
• Hydraulic thrust boring flushing operations
Specifications:
• Nozzle Size: # 20.0
• Material: Stainless steel
• Maximum Pressure: 5,076 PSI
• Inlet: 1/4” Female
• Outside Diameter (O.D.): .95”
• Weight: 2.8 oz
| Nominal Thread Size (NPT) |
1/8"
|
1/4"
|
3/8"
|
1/2"
|
3/4"
|
1"
|
| Actual I.D. Measurement |
3/8"
|
1/2"
|
5/8"
|
3/4"
|
1"
|
1-3/8"
|
Please use Nozzle Chart to determine proper nozzle size
Price: $136.76
1/4" Suttner #6.0 ST-49 Milling Sewer Nozzle 3 Front 4 Rear 5,076 PSI
SKU: 649010244061
1/4” Suttner #6.0 ST-49 Milling Sewer Cleaning Nozzle. With 3 Front and 4 Rear jets and rated to 5,076 PSI
Features:
• High Quality, German engineered components
• With its 3 very strong concentrated forward jets and the sharp cutting edges the milling type nozzles will tear through almost any kind of blockage
• The sharp edges cut, break and penetrate through every kind of blockage
• Made out of wear-resistant, hardened stainless steel
• Centric jet is plugged
• 3 Lateral front jets 0.5 mm drilled
• 4 Rear jets with nozzle inserts
• Nozzle is equipped with replaceable hardened stainless steel centric front and rear jets
• Due to this feature the efficiency is considerably higher compared with those nozzles with drilled holes and the service life is several times longer
Applications:
• Penetration of completely clogged pipes
• Opening of root masses
• Opening of frozen pipelines
• Hydraulic thrust boring flushing operations
Specifications:
• Nozzle Size: # 6.0
• Material: Stainless steel
• Maximum Pressure: 5,076 PSI
• Inlet: 1/4” Female
• Outside Diameter (O.D.): .95”
• Weight: 2.8 oz
| Nominal Thread Size (NPT) |
1/8"
|
1/4"
|
3/8"
|
1/2"
|
3/4"
|
1"
|
| Actual I.D. Measurement |
3/8"
|
1/2"
|
5/8"
|
3/4"
|
1"
|
1-3/8"
|
Please use Nozzle Chart to determine proper nozzle size
Price: $136.76
1/4" Suttner #7.0 ST-49 Milling Sewer Nozzle 3 Front 4 Rear 5,076 PSI
SKU: 649010244071
1/4” Suttner #7.0 ST-49 Milling Sewer Cleaning Nozzle. With 3 Front and 4 Rear jets and rated to 5,076 PSI
Features:
• High Quality, German engineered components
• With its 3 very strong concentrated forward jets and the sharp cutting edges the milling type nozzles will tear through almost any kind of blockage
• The sharp edges cut, break and penetrate through every kind of blockage
• Made out of wear-resistant, hardened stainless steel
• Centric jet is plugged
• 3 Lateral front jets 0.5 mm drilled
• 4 Rear jets with nozzle inserts
• Nozzle is equipped with replaceable hardened stainless steel centric front and rear jets
• Due to this feature the efficiency is considerably higher compared with those nozzles with drilled holes and the service life is several times longer
Applications:
• Penetration of completely clogged pipes
• Opening of root masses
• Opening of frozen pipelines
• Hydraulic thrust boring flushing operations
Specifications:
• Nozzle Size: # 7.0
• Material: Stainless steel
• Maximum Pressure: 5,076 PSI
• Inlet: 1/4” Female
• Outside Diameter (O.D.): .95”
• Weight: 2.8 oz
| Nominal Thread Size (NPT) |
1/8"
|
1/4"
|
3/8"
|
1/2"
|
3/4"
|
1"
|
| Actual I.D. Measurement |
3/8"
|
1/2"
|
5/8"
|
3/4"
|
1"
|
1-3/8"
|
Please use Nozzle Chart to determine proper nozzle size
Price: $136.76
1/4" Suttner #8.0 ST-49 Milling Sewer Nozzle 3 Front 4 Rear 5,076 PSI
SKU: 649010244081
1/4” Suttner #8.0 ST-49 Milling Sewer Cleaning Nozzle. With 3 Front and 4 Rear jets and rated to 5,076 PSI
Features:
• High Quality, German engineered components
• With its 3 very strong concentrated forward jets and the sharp cutting edges the milling type nozzles will tear through almost any kind of blockage
• The sharp edges cut, break and penetrate through every kind of blockage
• Made out of wear-resistant, hardened stainless steel
• Centric jet is plugged
• 3 Lateral front jets 0.5 mm drilled
• 4 Rear jets with nozzle inserts
• Nozzle is equipped with replaceable hardened stainless steel centric front and rear jets
• Due to this feature the efficiency is considerably higher compared with those nozzles with drilled holes and the service life is several times longer
Applications:
• Penetration of completely clogged pipes
• Opening of root masses
• Opening of frozen pipelines
• Hydraulic thrust boring flushing operations
Specifications:
• Nozzle Size: # 8.0
• Material: Stainless steel
• Maximum Pressure: 5,076 PSI
• Inlet: 1/4” Female
• Outside Diameter (O.D.): .95”
• Weight: 2.8 oz
| Nominal Thread Size (NPT) |
1/8"
|
1/4"
|
3/8"
|
1/2"
|
3/4"
|
1"
|
| Actual I.D. Measurement |
3/8"
|
1/2"
|
5/8"
|
3/4"
|
1"
|
1-3/8"
|
Please use Nozzle Chart to determine proper nozzle size
Price: $136.76
1/4" Suttner #10.0 ST-49 Milling Sewer Nozzle 3 Front 4 Rear 5,076 PSI
SKU: 649010244101
1/4” Suttner #10.0 ST-49 Milling Sewer Cleaning Nozzle. With 3 Front and 4 Rear jets and rated to 5,076 PSI
Features:
• High Quality, German engineered components
• With its 3 very strong concentrated forward jets and the sharp cutting edges the milling type nozzles will tear through almost any kind of blockage
• The sharp edges cut, break and penetrate through every kind of blockage
• Made out of wear-resistant, hardened stainless steel
• Centric jet is plugged
• 3 Lateral front jets 0.5 mm drilled
• 4 Rear jets with nozzle inserts
• Nozzle is equipped with replaceable hardened stainless steel centric front and rear jets
• Due to this feature the efficiency is considerably higher compared with those nozzles with drilled holes and the service life is several times longer
Applications:
• Penetration of completely clogged pipes
• Opening of root masses
• Opening of frozen pipelines
• Hydraulic thrust boring flushing operations
Specifications:
• Nozzle Size: # 10.0
• Material: Stainless steel
• Maximum Pressure: 5,076 PSI
• Inlet: 1/4” Female
• Outside Diameter (O.D.): .95”
• Weight: 2.8 oz
| Nominal Thread Size (NPT) |
1/8"
|
1/4"
|
3/8"
|
1/2"
|
3/4"
|
1"
|
| Actual I.D. Measurement |
3/8"
|
1/2"
|
5/8"
|
3/4"
|
1"
|
1-3/8"
|
Please use Nozzle Chart to determine proper nozzle size
Price: $136.76
1/4" Suttner #12.0 ST-49 Milling Sewer Nozzle 3 Front 4 Rear 5,076 PSI
SKU: 649010244121
1/4” Suttner #12.0 ST-49 Milling Sewer Cleaning Nozzle. With 3 Front and 4 Rear jets and rated to 5,076 PSI
Features:
• High Quality, German engineered components
• With its 3 very strong concentrated forward jets and the sharp cutting edges the milling type nozzles will tear through almost any kind of blockage
• The sharp edges cut, break and penetrate through every kind of blockage
• Made out of wear-resistant, hardened stainless steel
• Centric jet is plugged
• 3 Lateral front jets 0.5 mm drilled
• 4 Rear jets with nozzle inserts
• Nozzle is equipped with replaceable hardened stainless steel centric front and rear jets
• Due to this feature the efficiency is considerably higher compared with those nozzles with drilled holes and the service life is several times longer
Applications:
• Penetration of completely clogged pipes
• Opening of root masses
• Opening of frozen pipelines
• Hydraulic thrust boring flushing operations
Specifications:
• Nozzle Size: # 12.0
• Material: Stainless steel
• Maximum Pressure: 5,076 PSI
• Inlet: 1/4” Female
• Outside Diameter (O.D.): .95”
• Weight: 2.8 oz
| Nominal Thread Size (NPT) |
1/8"
|
1/4"
|
3/8"
|
1/2"
|
3/4"
|
1"
|
| Actual I.D. Measurement |
3/8"
|
1/2"
|
5/8"
|
3/4"
|
1"
|
1-3/8"
|
Please use Nozzle Chart to determine proper nozzle size
Price: $136.76
1/4" Suttner #4.5 ST-49 Milling Sewer Nozzle 3 Front 4 Rear 5,076 PSI
SKU: 649010234045
1/4” Suttner #4.5 ST-49 Milling Sewer Cleaning Nozzle. With 3 Front and 4 Rear jets and rated to 5,076 PSI
Features:
• High Quality, German engineered components
• With its 3 very strong concentrated forward jets and the sharp cutting edges the milling type nozzles will tear through almost any kind of blockage
• The sharp edges cut, break and penetrate through every kind of blockage
• Made out of wear-resistant, hardened stainless steel
• Centric jet is plugged
• 3 Lateral front jets 0.5 mm drilled
• 4 Rear jets with nozzle inserts
• Nozzle is equipped with replaceable hardened stainless steel centric front and rear jets
• Due to this feature the efficiency is considerably higher compared with those nozzles with drilled holes and the service life is several times longer
Applications:
• Penetration of completely clogged pipes
• Opening of root masses
• Opening of frozen pipelines
• Hydraulic thrust boring flushing operations
Specifications:
• Nozzle Size: # 4.5
• Material: Stainless steel
• Maximum Pressure: 5,076 PSI
• Inlet: 1/4” Female
• Outside Diameter (O.D.): .95”
• Weight: 2.8 oz
| Nominal Thread Size (NPT) |
1/8"
|
1/4"
|
3/8"
|
1/2"
|
3/4"
|
1"
|
| Actual I.D. Measurement |
3/8"
|
1/2"
|
5/8"
|
3/4"
|
1"
|
1-3/8"
|
Please use Nozzle Chart to determine proper nozzle size
Price: $136.76
3/8" Suttner #9.0 ST-49 Milling Sewer Nozzle 1 Centric 3 Front 6 Rear 5,076 PSI
SKU: 649010346090
3/8” Suttner #9.0 ST-49 Milling Sewer Cleaning Nozzle. With 1 Centric, 3 Front and 6 Rear jets and rated to 5,076 PSI
Features:
• High Quality, German engineered components
• With its 4 very strong concentrated forward jets and the sharp cutting edges the milling type nozzles will tear through almost any kind of blockage
• The sharp edges cut, break and penetrate through every kind of blockage
• Made out of wear-resistant, hardened stainless steel
• 1 Centric front jet with nozzle insert
• 3 Lateral front jets with nozzle inserts
• 6 Rear jets with nozzle inserts
• Nozzle is equipped with replaceable hardened stainless steel nozzle inserts
• Due to this feature the efficiency is considerably higher compared with those nozzles with drilled holes and the service life is several times longer
Applications:
• Penetration of completely clogged pipes
• Opening of root masses
• Opening of frozen pipelines
• Hydraulic thrust boring flushing operations
Specifications:
• Nozzle Size: # 9.0
• Material: Stainless steel
• Maximum Pressure: 5,076 PSI
• Inlet: 3/8” Female
• Outside Diameter (O.D.): 1.11”
• Weight: 4.0 oz
| Nominal Thread Size (NPT) |
1/8"
|
1/4"
|
3/8"
|
1/2"
|
3/4"
|
1"
|
| Actual I.D. Measurement |
3/8"
|
1/2"
|
5/8"
|
3/4"
|
1"
|
1-3/8"
|
Please use Nozzle Chart to determine proper nozzle size
Price: $137.43
power equipment and supply
Copyright © 2025 PWMall.com. All Rights Reserved.