Suttner America

Suttner ST-58 Change Over Valve 5,000 PSI 1/4" FPT. Suttner ST58 change-over design allows you to switch between lances and nozzles with a twist

Features
• Stainless steel
• No roll over nozzle
• Corrosive resistant

Specifications
• Max Pressure: 5,000 PSI
• Max Temp: 200° F.
• Inlet: 1/4" Female NPT
• Outlets (2): 1/4" Female NPT
• Weight: 0.85 lbs

Suttner ST-72 Stainless Steel 23.5” Vented Grip Foam Lance with #3.0 mm (Blue) Air Injector Nozzle and 1/4" M Inlet. In conjunction with a spray gun and Suttner foam injector, allows cleaning agents or disinfectants to be applied evenly over a large surface. Stainless steel construction

Features
• Thick foam is produced when air flows through vented injector housing and mixes with water and chemical stream
• Wet foam allows more efficient use of chemical
• More durable than conventional foamers

Specifications
• Air Injector Nozzle Size: 3.0 mm (Blue)
• Max Pressure: 3,625 PSI
• Length: 23.5”
• Max Temp: 176° F.
• Inlet: 1/4" Male
• Note: Suttner ST-160, ST-160M or St-164 Chemical or Foam injector required and is not included
• Weight: 1.95 lb

Please use Nozzle Chart to determine proper Spray Nozzle Size

Nozzle Chart

Use Spray Nozzle Size and Foam Lance Chart to determine correct Air Injector Nozzle Size to use

Foam Lance Chart

Suttner ST-72 Stainless Steel 23.5” Vented Grip Foam Lance with #2.0 mm (Green) Air Injector Nozzle and 1/4" M Inlet. In conjunction with a spray gun and Suttner foam injector, allows cleaning agents or disinfectants to be applied evenly over a large surface. Stainless steel construction

Features
• Thick foam is produced when air flows through vented injector housing and mixes with water and chemical stream
• Wet foam allows more efficient use of chemical
• More durable than conventional foamers

Specifications
• Air Injector Nozzle Size: 2.0 mm (Green)
• Max Pressure: 3,625 PSI
• Length: 23.5”
• Max Temp: 176° F.
• Inlet: 1/4" Male
• Note: Suttner ST-160, ST-160M or St-164 Chemical or Foam injector required and is not included
• Weight: 1.95 lb

Please use Nozzle Chart to determine proper Spray Nozzle Size

Nozzle Chart

Use Spray Nozzle Size and Foam Lance Chart to determine correct Air Injector Nozzle Size to use

Foam Lance Chart

Suttner ST-72 Stainless Steel 23.5” Vented Grip Foam Lance with #2.3 mm (Yellow) Air Injector Nozzle and 1/4" M Inlet. In conjunction with a spray gun and Suttner foam injector, allows cleaning agents or disinfectants to be applied evenly over a large surface. Stainless steel construction

Features
• Thick foam is produced when air flows through vented injector housing and mixes with water and chemical stream
• Wet foam allows more efficient use of chemical
• More durable than conventional foamers

Specifications
• Air Injector Nozzle Size: 2.3 mm (Yellow)
• Max Pressure: 3,625 PSI
• Length: 23.5”
• Max Temp: 176° F.
• Inlet: 1/4" Male
• Note: Suttner ST-160, ST-160M or St-164 Chemical or Foam injector required and is not included
• Weight: 1.95 lb

Please use Nozzle Chart to determine proper Spray Nozzle Size

Nozzle Chart

Use Spray Nozzle Size and Foam Lance Chart to determine correct Air Injector Nozzle Size to use

Foam Lance Chart

Suttner ST-72 Stainless Steel 23.5” Vented Grip Foam Lance with #3.2 mm (Red) Air Injector Nozzle and 1/4" M Inlet. In conjunction with a spray gun and Suttner foam injector, allows cleaning agents or disinfectants to be applied evenly over a large surface. Stainless steel construction

Features
• Thick foam is produced when air flows through vented injector housing and mixes with water and chemical stream
• Wet foam allows more efficient use of chemical
• More durable than conventional foamers

Specifications
• Air Injector Nozzle Size: 3.2 mm (Red)
• Max Pressure: 3,625 PSI
• Length: 23.5”
• Max Temp: 176° F.
• Inlet: 1/4" Male
• Note: Suttner ST-160, ST-160M or St-164 Chemical or Foam injector required and is not included
• Weight: 1.95 lb

Please use Nozzle Chart to determine proper Spray Nozzle Size

Nozzle Chart

Use Spray Nozzle Size and Foam Lance Chart to determine correct Air Injector Nozzle Size to use

Foam Lance Chart

Suttner ST-72F Stainless Steel Food Grade 23.5” Vented Grip Foam Lance with #2.0 mm (Green) Air Injector Nozzle and 1/4" M Inlet. In conjunction with a spray gun and Suttner foam injector, allows cleaning agents or disinfectants to be applied evenly over a large surface. Stainless steel construction

Features
• Thick foam is produced when air flows through vented injector housing and mixes with water and chemical stream
• Wet foam allows more efficient use of chemical
• More durable than conventional foamers
• Food grade - Stainless steel and plastic intended to come into contact with foodstuffs

Specifications
• Air Injector Nozzle Size: 2.0 mm (Green)
• Max Pressure: 3,625 PSI
• Length: 23.5”
• Max Temp: 176° F.
• Inlet: 1/4" Male
• Note: Suttner ST-160, ST-160M or St-164 Chemical or Foam injector required and is not included
• Weight: 1.50 lb

Please use Nozzle Chart to determine proper Spray Nozzle Size

Nozzle Chart

Use Spray Nozzle Size and Foam Lance Chart to determine correct Air Injector Nozzle Size to use

Foam Lance Chart

Suttner ST-72F Stainless Steel Food Grade 23.5” Vented Grip Foam Lance with #2.3 mm (Yellow) Air Injector Nozzle and 1/4" M Inlet. In conjunction with a spray gun and Suttner foam injector, allows cleaning agents or disinfectants to be applied evenly over a large surface. Stainless steel construction

Features
• Thick foam is produced when air flows through vented injector housing and mixes with water and chemical stream
• Wet foam allows more efficient use of chemical
• More durable than conventional foamers
• Food grade - Stainless steel and plastic intended to come into contact with foodstuffs

Specifications
• Air Injector Nozzle Size: 2.3 mm (Yellow)
• Max Pressure: 3,625 PSI
• Length: 23.5”
• Max Temp: 176° F.
• Inlet: 1/4" Male
• Note: Suttner ST-160, ST-160M or St-164 Chemical or Foam injector required and is not included
• Weight: 1.50 lb

Please use Nozzle Chart to determine proper Spray Nozzle Size

Nozzle Chart

Use Spray Nozzle Size and Foam Lance Chart to determine correct Air Injector Nozzle Size to use

Foam Lance Chart

Suttner ST-72F Stainless Steel Food Grade 23.5” Vented Grip Foam Lance with #3.0 mm (Blue) Air Injector Nozzle and 1/4" M Inlet. In conjunction with a spray gun and Suttner foam injector, allows cleaning agents or disinfectants to be applied evenly over a large surface. Stainless steel construction

Features
• Thick foam is produced when air flows through vented injector housing and mixes with water and chemical stream
• Wet foam allows more efficient use of chemical
• More durable than conventional foamers
• Food grade - Stainless steel and plastic intended to come into contact with foodstuffs

Specifications
• Air Injector Nozzle Size: 3.0 mm (Blue)
• Max Pressure: 3,625 PSI
• Length: 23.5”
• Max Temp: 176° F.
• Inlet: 1/4" Male
• Note: Suttner ST-160, ST-160M or St-164 Chemical or Foam injector required and is not included
• Weight: 1.50 lb

Please use Nozzle Chart to determine proper Spray Nozzle Size

Nozzle Chart

Use Spray Nozzle Size and Foam Lance Chart to determine correct Air Injector Nozzle Size to use

Foam Lance Chart

Features
• Increases cleaning efficiency as much as 200%
• The 0° rotation creates a cleaning and tearing action
• Ideal for hard surfaces
• Improved materials for longer life

Specifications
• Nozzle Size # 12.0
• Max PSI: 6,000
• Max Temp.: 212° F
• Inlet: 1/2" Female NPT
• NOTE: All rotating nozzles should be started pointing downward
• Weight: 1.60 lbs

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

Features
• Increases cleaning efficiency as much as 200%
• The 0° rotation creates a cleaning and tearing action
• Ideal for hard surfaces
• Improved materials for longer life

Specifications
• Nozzle Size # 15.0
• Max PSI: 6,000
• Max Temp.: 212° F
• Inlet: 1/2" Female NPT
• NOTE: All rotating nozzles should be started pointing downward
• Weight: 1.60 lbs

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

Suttner ST-166 Stainless Steel Dual Chemical Injector w/18 Metering / Dosing Nozzles, #18.0, 5000 PSI, 3/8" F x 3/8” M

Features
• Food grade quality and specifications
• Durable Stainless Steel housing
• 18 Metering / dosing nozzles included (See 3rd picture)
• Uses .35" I.D. Hose

Specifications
• Nozzle/Orifice Size: 18.0
• Max Flow Rate: 18 GPM
• Min Flow Rate: 1 GPM
• Max Pressure: 5,000 PSI
• Min Pressure: 1,000 PSI
• Max Temp: 194° F.
• Inlet: 3/8” Female
• Outlet: 3/8” Male
• Hose Barbs (2): .35” ID hose
• Weight: 0.75 lb

Please use Nozzle Chart to determine proper nozzle size

Note: If between sizes, choose the larger nozzle size

Nozzle Chart

See the ST-166 System Diagram below to determine the foam components needed

ST-166 System Diagram

Suttner ST-166 Stainless Steel Dual Chemical Injector w/18 Metering / Dosing Nozzles, #4.5, 5000 PSI, 3/8" F x 3/8” M

Features
• Food grade quality and specifications
• Durable Stainless Steel housing
• 18 Metering / dosing nozzles included (See 3rd picture)
• Uses .35" I.D. Hose

Specifications
• Nozzle/Orifice Size: 4.5
• Max Flow Rate: 18 GPM
• Min Flow Rate: 1 GPM
• Max Pressure: 5,000 PSI
• Min Pressure: 1,000 PSI
• Max Temp: 194° F.
• Inlet: 3/8” Female
• Outlet: 3/8” Male
• Hose Barbs (2): .35” ID hose
• Weight: 0.75 lb

Please use Nozzle Chart to determine proper nozzle size

Note: If between sizes, choose the larger nozzle size

Nozzle Chart

See the ST-166 System Diagram below to determine the foam components needed

ST-166 System Diagram

Suttner ST-166 Stainless Steel Dual Chemical Injector w/18 Metering / Dosing Nozzles, #7.0, 5000 PSI, 3/8" F x 3/8” M

Features
• Food grade quality and specifications
• Durable Stainless Steel housing
• 18 Metering / dosing nozzles included (See 3rd picture)
• Uses .35" I.D. Hose

Specifications
• Nozzle/Orifice Size: 7.0
• Max Flow Rate: 18 GPM
• Min Flow Rate: 1 GPM
• Max Pressure: 5,000 PSI
• Min Pressure: 1,000 PSI
• Max Temp: 194° F.
• Inlet: 3/8” Female
• Outlet: 3/8” Male
• Hose Barbs (2): .35” ID hose
• Weight: 0.75 lb

Please use Nozzle Chart to determine proper nozzle size

Note: If between sizes, choose the larger nozzle size

Nozzle Chart

See the ST-166 System Diagram below to determine the foam components needed

ST-166 System Diagram

Suttner ST-166 Stainless Steel Dual Chemical Injector w/18 Metering / Dosing Nozzles, #4.0, 5000 PSI, 3/8" F x 3/8” M

Features
• Food grade quality and specifications
• Durable Stainless Steel housing
• 18 Metering / dosing nozzles included (See 3rd picture)
• Uses .35" I.D. Hose

Specifications
• Nozzle/Orifice Size: 4.0
• Max Flow Rate: 18 GPM
• Min Flow Rate: 1 GPM
• Max Pressure: 5,000 PSI
• Min Pressure: 1,000 PSI
• Max Temp: 194° F.
• Inlet: 3/8” Female
• Outlet: 3/8” Male
• Hose Barbs (2): .35” ID hose
• Weight: 0.75 lb

Please use Nozzle Chart to determine proper nozzle size

Note: If between sizes, choose the larger nozzle size

Nozzle Chart

See the ST-166 System Diagram below to determine the foam components needed

ST-166 System Diagram

Suttner ST-166 Stainless Steel Dual Chemical Injector w/18 Metering / Dosing Nozzles, #11.0, 5000 PSI, 3/8" F x 3/8” M

Features
• Food grade quality and specifications
• Durable Stainless Steel housing
• 18 Metering / dosing nozzles included (See 3rd picture)
• Uses .35" I.D. Hose

Specifications
• Nozzle/Orifice Size: 11.0
• Max Flow Rate: 18 GPM
• Min Flow Rate: 1 GPM
• Max Pressure: 5,000 PSI
• Min Pressure: 1,000 PSI
• Max Temp: 194° F.
• Inlet: 3/8” Female
• Outlet: 3/8” Male
• Hose Barbs (2): .35” ID hose
• Weight: 0.75 lb

Please use Nozzle Chart to determine proper nozzle size

Note: If between sizes, choose the larger nozzle size

Nozzle Chart

See the ST-166 System Diagram below to determine the foam components needed

ST-166 System Diagram

Suttner ST-160M Stainless Steel Single Chemical Injector w/Metering Valve, #3.0, 5000 Psi, 3/8" F x 3/8” M

Features
• Food grade quality and specifications
• Stainless steel construction
• Conserves chemicals
• Locks in position for accurate metering
• Multiple metering positions

Specifications
• Nozzle/Orifice Size: 3.0
• Max Flow Rate: 21 GPM
• Min Flow Rate: 1 GPM
• Max Pressure: 5,000 PSI
• Min Pressure: 1,000 PSI
• Max Temp: 194° F.
• Inlet: 3/8” Female
• Outlet: 3/8” Male
• Hose Barb: .35” ID hose
• Weight: 1.25 lb

Please use Nozzle Chart to determine proper nozzle size

Note: If between sizes, choose the larger nozzle size

Nozzle Chart

See the ST-160M System Diagram below to determine the foam components needed

ST-160M System Diagram

Suttner ST-160M Stainless Steel Single Chemical Injector w/Metering Valve, #3.5, 5000 Psi, 3/8" F x 3/8” M

Features
• Food grade quality and specifications
• Stainless steel construction
• Conserves chemicals
• Locks in position for accurate metering
• Multiple metering positions

Specifications
• Nozzle/Orifice Size: 3.5
• Max Flow Rate: 21 GPM
• Min Flow Rate: 1 GPM
• Max Pressure: 5,000 PSI
• Min Pressure: 1,000 PSI
• Max Temp: 194° F.
• Inlet: 3/8” Female
• Outlet: 3/8” Male
• Hose Barb: .35” ID hose
• Weight: 1.25 lb

Please use Nozzle Chart to determine proper nozzle size

Note: If between sizes, choose the larger nozzle size

Nozzle Chart

See the ST-160M System Diagram below to determine the foam components needed

ST-160M System Diagram

Suttner ST-160M Stainless Steel Single Chemical Injector w/Metering Valve, #4.5, 5000 Psi, 3/8" F x 3/8” M

Features
• Food grade quality and specifications
• Stainless steel construction
• Conserves chemicals
• Locks in position for accurate metering
• Multiple metering positions

Specifications
• Nozzle/Orifice Size: 4.5
• Max Flow Rate: 21 GPM
• Min Flow Rate: 1 GPM
• Max Pressure: 5,000 PSI
• Min Pressure: 1,000 PSI
• Max Temp: 194° F.
• Inlet: 3/8” Female
• Outlet: 3/8” Male
• Hose Barb: .35” ID hose
• Weight: 1.25 lb

Please use Nozzle Chart to determine proper nozzle size

Note: If between sizes, choose the larger nozzle size

Nozzle Chart

See the ST-160M System Diagram below to determine the foam components needed

ST-160M System Diagram

Suttner ST-160M Stainless Steel Single Chemical Injector w/Metering Valve, #5.5, 5000 Psi, 3/8" F x 3/8” M

Features
• Food grade quality and specifications
• Stainless steel construction
• Conserves chemicals
• Locks in position for accurate metering
• Multiple metering positions

Specifications
• Nozzle/Orifice Size: 5.5
• Max Flow Rate: 21 GPM
• Min Flow Rate: 1 GPM
• Max Pressure: 5,000 PSI
• Min Pressure: 1,000 PSI
• Max Temp: 194° F.
• Inlet: 3/8” Female
• Outlet: 3/8” Male
• Hose Barb: .35” ID hose
• Weight: 1.25 lb

Please use Nozzle Chart to determine proper nozzle size

Note: If between sizes, choose the larger nozzle size

Nozzle Chart

See the ST-160M System Diagram below to determine the foam components needed

ST-160M System Diagram

Suttner ST-160M Stainless Steel Single Chemical Injector w/Metering Valve, #6.0, 5000 Psi, 3/8" F x 3/8” M

Features
• Food grade quality and specifications
• Stainless steel construction
• Conserves chemicals
• Locks in position for accurate metering
• Multiple metering positions

Specifications
• Nozzle/Orifice Size: 6.0
• Max Flow Rate: 21 GPM
• Min Flow Rate: 1 GPM
• Max Pressure: 5,000 PSI
• Min Pressure: 1,000 PSI
• Max Temp: 194° F.
• Inlet: 3/8” Female
• Outlet: 3/8” Male
• Hose Barb: .35” ID hose
• Weight: 1.25 lb

Please use Nozzle Chart to determine proper nozzle size

Note: If between sizes, choose the larger nozzle size

Nozzle Chart

See the ST-160M System Diagram below to determine the foam components needed

ST-160M System Diagram