Suttner America

Features
• High Quality, German engineered components
• High or low pressure operation is controlled by twisting the side handle
• Side handle helps manage the lance with ease for longer working periods
• Threads are rolled on providing consistent sealing and four times the strength than cut threads
• Lance is equipped with 65° x #30 low pressure brass soap nozzle
• Nozzle protectors included

Specifications
• Max Pressure: 7,300 PSI
• Length: 51”
• Max Temp: 300° F.
• Lance Material: Stainless steel
• Inlet: 1/4" Male NPT
• Outlets: 1/4" Female NPT x 1/4” Soap Nozzle
• Note: 1/4” MPT Nozzle not included
• Weight: 3.46 lb

Suttner ST-275 Stainless Steel Unloader Valve 7,250 PSI 10.5 GPM 3/8”F x 1/2" F with Switch. Stainless steel design. Particularly durable

Features:
• Smooth switching behavior
• All media-contacting parts made of stainless steel
• Pressure reduction in hose and gun in bypass operation to below 40% of the working pressure
• The sealing system does not require any moving high-pressure soft seals and is characterized by a particularly long service life
• High pressure connections suitable for sealing with bonded seals
• Valve ball made of high-performance ceramic

Flyer

Specifications:
• Max Pressure: 7,250 PSI
• Flow Rate: 10.5 GPM
• Max Temperature: 194° F
• Maximum inrush current 10mA-5A(2A)
• VoItage: 12-24VDC 12-250VAC
• Protection CIass: IP65
• CabIe:1.2 meters 3xAWG20
• Inlet Port: 3/8" F
• Outlet Port: 1/2” F
• Bypass Port: 3/8” F
• Weight: 2.86 lbs

Features
• High Quality, German engineered components
• High or low pressure operation is controlled by twisting the side handle
• Side handle helps manage the lance with ease for longer working periods
• Threads are rolled on providing consistent sealing and four times the strength than cut threads
• Lance is equipped with 65° x #30 low pressure brass soap nozzle
• Nozzle protectors included

Specifications
• Max Pressure: 7,300 PSI
• Length: 38”
• Max Temp: 300° F.
• Lance Material: Stainless steel
• Inlet: 1/4" Male NPT
• Outlets: 1/4" Female NPT x 1/4” Soap Nozzle
• Note: 1/4” MPT Nozzle not included
• Weight: 2.62 lb

Features:
• Pedal and valve are in protective housing
• Inlet and outlet are positioned to help keep hose out of the way
• Heavy gauge steel construction for durability and stability
• Gun foot valve houses a ST-2700SS spray gun used as a control valve
• Can be used in other applications

Specifications:
• Inlet: 3/8” FPT
• Outlet: 1/4” FPT
• Maximum Pressure: 5,000 PSI
• Max. Flow Rate: 12.0 GPM
• Max. Temp.: 300º F.
• Weight: 15 lbs.

Features
• High Quality, German engineered components
• Forged stainless steel housing, piston, and malleable seat
• Special heat and chemical resistant seals

Specifications
• Max Pressure: 8,700 PSI
• Max Flow: 21.0 GPM
• Max Temp: 300° F.
• Inlet: 1/2" Female NPT
• Outlet: 1/2" Female NPT
• Weight: 2.58 lb

Features
• High Quality, German engineered components
• Forged stainless steel housing, piston, and malleable seat
• Special heat and chemical resistant seals

Specifications
• Max Pressure: 8,700 PSI
• Max Flow: 21.0 GPM
• Max Temp: 300° F.
• Inlet: 3/8" Female NPT
• Outlet: 1/4" Female NPT
• Weight: 2.58 lb

Suttner ST-76 Foam Blaster Head 3,625 PSI with #5.0 x 3 Air Injector Nozzles and 1/2" F Inlet. The foamblaster ST-76 is designed for applications in agriculture, industry, municipal cleaning and fire fighting technology. Designed for high volume applications

Features
• The foam blaster ST-76 is made out of a premium combination of stainless steel and plastic
• Starting with an inlet pressure of only 435 PSI the foam blaster ST-76 is able to foam mixtures of water and foam agents with a flow of 5.3 - 15.8 GPM and without the addition of compressed air
• By means of exchangeable air injector nozzles it is possible to adapt the foam blaster ST-76 to the requirements such as water quantity and inlet pressure in an optimal way
• Stainless steel injector nozzle
• Wider spray angle
• For applications 6 GPM or higher
• Throws foam 40 feet
• Cover large areas

ST-76 with ST-160 Chemical Injector on YouTube

Specifications
• Air Injector Nozzles (3) Size: 5.0
• Max Pressure: 3,625 PSI
• Flow Rate: 5.3 – 15.8 GPM
• Max Temp: 212° F.
• Inlet: 1/2" Female
• Note: Suttner ST-160, ST-160M or St-164 Chemical or Foam injector required and is not included
• Weight: 1.15 lb

Please use Nozzle Chart to determine proper Spray Nozzle Size

Nozzle Chart

Use Spray Nozzle Size and Foam Nozzle Chart to determine correct Foam Nozzle to use

Foam Nozzle Chart

Suttner ST-76 Foam Blaster Head 3,625 PSI with #7.0 x 3 Air Injector Nozzles and 1/2" F Inlet. The foamblaster ST-76 is designed for applications in agriculture, industry, municipal cleaning and fire fighting technology. Designed for high volume applications

Features
• The foam blaster ST-76 is made out of a premium combination of stainless steel and plastic
• Starting with an inlet pressure of only 435 PSI the foam blaster ST-76 is able to foam mixtures of water and foam agents with a flow of 5.3 - 15.8 GPM and without the addition of compressed air
• By means of exchangeable air injector nozzles it is possible to adapt the foam blaster ST-76 to the requirements such as water quantity and inlet pressure in an optimal way
• Stainless steel injector nozzle
• Wider spray angle
• For applications 6 GPM or higher
• Throws foam 40 feet
• Cover large areas

ST-76 with ST-160 Chemical Injector on YouTube

Specifications
• Air Injector Nozzles (3) Size: 7.0
• Max Pressure: 3,625 PSI
• Flow Rate: 5.3 – 15.8 GPM
• Max Temp: 212° F.
• Inlet: 1/2" Female
• Note: Suttner ST-160, ST-160M or St-164 Chemical or Foam injector required and is not included
• Weight: 1.15 lb

Please use Nozzle Chart to determine proper Spray Nozzle Size

Nozzle Chart

Use Spray Nozzle Size and Foam Nozzle Chart to determine correct Foam Nozzle to use

Foam Nozzle Chart

Suttner ST-76 Foam Blaster Head 3,625 PSI with #7.5 x 3 Air Injector Nozzles and 1/2" F Inlet. The foamblaster ST-76 is designed for applications in agriculture, industry, municipal cleaning and fire fighting technology. Designed for high volume applications

Features
• The foam blaster ST-76 is made out of a premium combination of stainless steel and plastic
• Starting with an inlet pressure of only 435 PSI the foam blaster ST-76 is able to foam mixtures of water and foam agents with a flow of 5.3 - 15.8 GPM and without the addition of compressed air
• By means of exchangeable air injector nozzles it is possible to adapt the foam blaster ST-76 to the requirements such as water quantity and inlet pressure in an optimal way
• Stainless steel injector nozzle
• Wider spray angle
• For applications 6 GPM or higher
• Throws foam 40 feet
• Cover large areas

ST-76 with ST-160 Chemical Injector on YouTube

Specifications
• Air Injector Nozzles (3) Size: 7.5
• Max Pressure: 3,625 PSI
• Flow Rate: 5.3 – 15.8 GPM
• Max Temp: 212° F.
• Inlet: 1/2" Female
• Note: Suttner ST-160, ST-160M or St-164 Chemical or Foam injector required and is not included
• Weight: 1.15 lb

Please use Nozzle Chart to determine proper Spray Nozzle Size

Nozzle Chart

Use Spray Nozzle Size and Foam Nozzle Chart to determine correct Foam Nozzle to use

Foam Nozzle Chart

Suttner ST-76 Foam Blaster Head 3,625 PSI with #8.0 x 3 Air Injector Nozzles and 1/2" F Inlet. The foamblaster ST-76 is designed for applications in agriculture, industry, municipal cleaning and fire fighting technology. Designed for high volume applications

Features
• The foam blaster ST-76 is made out of a premium combination of stainless steel and plastic
• Starting with an inlet pressure of only 435 PSI the foam blaster ST-76 is able to foam mixtures of water and foam agents with a flow of 5.3 - 15.8 GPM and without the addition of compressed air
• By means of exchangeable air injector nozzles it is possible to adapt the foam blaster ST-76 to the requirements such as water quantity and inlet pressure in an optimal way
• Stainless steel injector nozzle
• Wider spray angle
• For applications 6 GPM or higher
• Throws foam 40 feet
• Cover large areas

ST-76 with ST-160 Chemical Injector on YouTube

Specifications
• Air Injector Nozzles (3) Size: 8.0
• Max Pressure: 3,625 PSI
• Flow Rate: 5.3 – 15.8 GPM
• Max Temp: 212° F.
• Inlet: 1/2" Female
• Note: Suttner ST-160, ST-160M or St-164 Chemical or Foam injector required and is not included
• Weight: 1.15 lb

Please use Nozzle Chart to determine proper Spray Nozzle Size

Nozzle Chart

Use Spray Nozzle Size and Foam Nozzle Chart to determine correct Foam Nozzle to use

Foam Nozzle Chart

Suttner ST-76 Foam Blaster Head 3,625 PSI with #10.0 x 3 Air Injector Nozzles and 1/2" F Inlet. The foamblaster ST-76 is designed for applications in agriculture, industry, municipal cleaning and fire fighting technology. Designed for high volume applications

Features
• The foam blaster ST-76 is made out of a premium combination of stainless steel and plastic
• Starting with an inlet pressure of only 435 PSI the foam blaster ST-76 is able to foam mixtures of water and foam agents with a flow of 5.3 - 15.8 GPM and without the addition of compressed air
• By means of exchangeable air injector nozzles it is possible to adapt the foam blaster ST-76 to the requirements such as water quantity and inlet pressure in an optimal way
• Stainless steel injector nozzle
• Wider spray angle
• For applications 6 GPM or higher
• Throws foam 40 feet
• Cover large areas

ST-76 with ST-160 Chemical Injector on YouTube

Specifications
• Air Injector Nozzles (3) Size: 10.0
• Max Pressure: 3,625 PSI
• Flow Rate: 5.3 – 15.8 GPM
• Max Temp: 212° F.
• Inlet: 1/2" Female
• Note: Suttner ST-160, ST-160M or St-164 Chemical or Foam injector required and is not included
• Weight: 1.15 lb

Please use Nozzle Chart to determine proper Spray Nozzle Size

Nozzle Chart

Use Spray Nozzle Size and Foam Nozzle Chart to determine correct Foam Nozzle to use

Foam Nozzle Chart

Suttner ST-76 Foam Blaster Head 3,625 PSI with #15.0 x 3 Air Injector Nozzles and 1/2" F Inlet. The foamblaster ST-76 is designed for applications in agriculture, industry, municipal cleaning and fire fighting technology. Designed for high volume applications

Features
• The foam blaster ST-76 is made out of a premium combination of stainless steel and plastic
• Starting with an inlet pressure of only 435 PSI the foam blaster ST-76 is able to foam mixtures of water and foam agents with a flow of 5.3 - 15.8 GPM and without the addition of compressed air
• By means of exchangeable air injector nozzles it is possible to adapt the foam blaster ST-76 to the requirements such as water quantity and inlet pressure in an optimal way
• Stainless steel injector nozzle
• Wider spray angle
• For applications 6 GPM or higher
• Throws foam 40 feet
• Cover large areas

ST-76 with ST-160 Chemical Injector on YouTube

Specifications
• Air Injector Nozzles (3) Size: 15.0
• Max Pressure: 3,625 PSI
• Flow Rate: 5.3 – 15.8 GPM
• Max Temp: 212° F.
• Inlet: 1/2" Female
• Note: Suttner ST-160, ST-160M or St-164 Chemical or Foam injector required and is not included
• Weight: 1.15 lb

Please use Nozzle Chart to determine proper Spray Nozzle Size

Nozzle Chart

Use Spray Nozzle Size and Foam Nozzle Chart to determine correct Foam Nozzle to use

Foam Nozzle Chart

Suttner 7,200 PSI Triple Wire "Ultra High" Hose 3/8" x 150' Black. Designed for commercial high pressure cleaning applications

Features:
• Triple wire braided rubber hose
• Synthetic rubber abrasion resistant wrapped cover
• Commercial grade
• Heat resistant synthetic rubber inner tube

Specifications:
• Hose Inner Diameter: 3/8" ID
• Length: 150’
• Maximum Pressure: 7,200 PSI
• Braid: Triple wire
• Temp. Range: - 15° to + 250°
• Color: Black
• 3/8" MNPT connectors (Solid)
• Red bend restrictors on both ends
• Weight 46.75 Lbs.

Suttner ST-3500 Industrial Stainless Steel High Volume Spray Gun 5,000 PSI 52.8 GPM with 1/2" Swivel FPT Inlet. The ST-3500 is designed for maximum performance and chemical resistance

Features
• High Quality, German engineered components
• Stainless steel components
• Harden stainless steel valve piston
• Chemical resistant

Specifications
• Max Pressure: 5,000 PSI
• Max Flow: 52.8 GPM
• Max Temp: 300° F.
• Inlet: 1/2" Swivel Female NPT
• Outlet: 1/2" Female NPT
• Weight: 2.58 lb

Suttner ST-458 Turbo / Rotating / Hydro Excavation #30.0 Nozzle with 1/2” Inlet is rated for up to 6,000 PSI. The increased tearing action of the rotating spray is ideal for Hydro-Excavation and hard surface applications

Features
• Increases cleaning efficiency as much as 200%
• The 0° rotation creates a cleaning and tearing action
• Ideal for hard surfaces
• Improved materials for longer life

Specifications
• Nozzle Size # 30.0
• Max PSI: 6,000
• Max Temp.: 212° F
• Inlet: 1/2" Female NPT
• NOTE: All rotating nozzles should be started pointing downward
• Weight: 1.60 lbs

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

Suttner ST-3225 Ergonomic Inline Food Grade Spray Gun 31.5 GPM. Professional hp gun with progressive closing system. Stainless steel. Field of application: foam and rinsing applications in the food industry, etc. The ergonomic design of the ST-3225 helps reduce fatigue

Features
• The professional spray gun for the food industry
• Especially designed for highest requirements to hygiene and ergonomics
• The internal components are made from stainless steel and the outer body made out of plastics intended to come into contact with foodstuffs
• Suitable for a high flow of 31.5 GPM
• Progressive closing system by an integrated damper
• LTF technology: 90 % reduced holding force and 40 % reduced trigger force against usual market guns
• Very low pressure drop
• Food Grade

See ST-3225 in action on YouTube

Specifications
• Max Flow: 31.5 GPM
• Max Pressure: 870 PSI
• Max Temp: 212° F.
• Inlet: 1/2" Female Swivel
• Outlet: 1/2" Female
• Weight: 1.64 lb

Features
• Increases cleaning efficiency as much as 200%
• The 0° rotation creates a cleaning and tearing action
• Ideal for hard surfaces
• Improved materials for longer life

Specifications
• Nozzle Size # 30.0
• Max PSI: 6,000
• Max Temp.: 212° F
• Inlet: 1/4" Female NPT
• NOTE: All rotating nozzles should be started pointing downward
• Weight: 1.60 lbs

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

Suttner ST-175 Stainless Steel 36” Foam & Rinse Lance 5,000 PSI with 1/4" F Inlet. Switch from foam to rinse by turning the valve that’s conveniently within hands reach

Features
• The change-over lance ST-175 Foam & Clean is the ideal accessory for Suttner's foam injector line. The innovative change-over technology allows to direct the full flow into either one or the other outlet pipe just by turning the hand wheel at the inlet
• In one position of the hand wheel the flow is directed thru an ST-75 foam head for foaming. After changing over the full flow is directed thru the other pipe and a regular spray nozzle for rinsing
• Appropriate nozzle sizing at chemical injector and ST-175 allows changing from foaming to rinsing right at the lance. ST -175 Foam & Clean is compatible to ST-160 / ST-160M / ST-164 / ST-166 / ST-167
• Due to ST-175's changeable air injector nozzles the lance can be driven with all pressure washers with flow rates from 1 to 6 GPM. Nozzles with integrated jet former are required

ST-175 Foam & Rinse Lance on YouTube

Specifications
• Flow Rate: 1.0 – 6.0 GPM
• Max Pressure: 5,000 PSI
• Length: 36.0”
• Max Temp: 140° F.
• Inlet: 1/4" Female NPT
• Outlet (Foam): ST-75 Foam head (Air Injector Nozzle not included)
• Outlet (Rinse): 1/4" FPT with nozzle protector (1/4” MPT high pressure nozzle not included)
• Note: Suttner (ST-160, ST-160M or St-164 Chemical or Foam injector), air injector nozzle and 1/4" MPT nozzle required and are not included
• Weight: 3.65 lb

Please use Nozzle Chart to determine proper spray nozzle size

Nozzle Chart

Use Spray Nozzle Size and Foam Nozzle Chart to determine correct Air Injector Nozzle to use

Foam Nozzle Chart

Features:
• Pedal and valve are in protective housing
• Inlet and outlet are positioned to help keep hose out of the way
• Heavy gauge steel construction for durability and stability
• Gun foot valve houses a ST-2305 spray gun used as a control valve
• Can be used in other applications

Specifications:
• Inlet: 3/8” FPT
• Outlet: 1/4” FPT
• Maximum Pressure: 5,000 PSI
• Max. Flow Rate: 12.0 GPM
• Max. Temp.: 300º F.
• Weight: 15 lbs.

Suttner ST-275 Stainless Steel Unloader Valve 7,250 PSI 10.5 GPM 3/8”F x 1/2" F. Stainless steel design. Particularly durable

Features:
• Smooth switching behavior
• All media-contacting parts made of stainless steel
• Pressure reduction in hose and gun in bypass operation to below 40% of the working pressure
• The sealing system does not require any moving high-pressure soft seals and is characterized by a particularly long service life
• High pressure connections suitable for sealing with bonded seals
• Valve ball made of high-performance ceramic

Flyer

Specifications:
• Max Pressure: 7,250 PSI
• Flow Rate: 10.5 GPM
• Max Temperature: 194° F
• Inlet Port: 3/8" F
• Outlet Port: 1/2” F
• Bypass Port: 3/8” F
• Weight: 2.73 lbs