Suttner America

Suttner ST-167 Stainless Steel Chemical Bypass Injector, #12.0, 5000 Psi, 3/8" F x 3/8” F

Field of Application
• The injectors completely made out of stainless steel make it possible to open two cross section areas (50 mm2 each) in order to guarantee a smooth use without drop in pressure when washing/rinsing
• This ensures that the injector can be permanently kept in the high pressure line, also at the time when large water quantities are used e.g. in the agriculture or food industry
• The cleaning capacity when cleaning and rinsing is not affected at all.
• A lever makes it possible to change from the cleaning and rinsing mode into injector operation
• When using the cleaning mode, there are two bore holes guiding the high pressure water parallel to the injector (bypass mode)
• When using the injector the available water quantity is guided through the injection area

Features
• Integrated lever that allows you to go from disinfectant to foam to rinse
• Food grade quality and specifications
• Durable Stainless steel construction
• 10 Dosing nozzles included
• Use 0.35 ID hose

Specifications
• Nozzle/Orifice Size: 12.0
• Max Flow Rate:18 GPM
• Min Flow Rate: 1 GPM
• Max Pressure: 5,000 PSI
• Min Pressure: 1,000 PSI
• Max Temp: 212° F.( Optimum foam created 130°F or less)
• Inlet: 3/8” Female
• Outlet: 3/8” Female
• Hose Barbs: .35” ID hose
• See the ST-167 System Diagram (3rd Picture)
• Weight: 2.38 lb

Please use Nozzle Chart to determine proper nozzle size

Note: If between sizes, choose the larger nozzle size

Nozzle Chart

Suttner ST-167 Stainless Steel Chemical Bypass Injector, #3.0, 5000 Psi, 3/8" F x 3/8” F

Field of Application
• The injectors completely made out of stainless steel make it possible to open two cross section areas (50 mm2 each) in order to guarantee a smooth use without drop in pressure when washing/rinsing
• This ensures that the injector can be permanently kept in the high pressure line, also at the time when large water quantities are used e.g. in the agriculture or food industry
• The cleaning capacity when cleaning and rinsing is not affected at all.
• A lever makes it possible to change from the cleaning and rinsing mode into injector operation
• When using the cleaning mode, there are two bore holes guiding the high pressure water parallel to the injector (bypass mode)
• When using the injector the available water quantity is guided through the injection area

Features
• Integrated lever that allows you to go from disinfectant to foam to rinse
• Food grade quality and specifications
• Durable Stainless steel construction
• 10 Dosing nozzles included
• Use 0.35 ID hose

Specifications
• Nozzle/Orifice Size: 3.0
• Max Flow Rate:18 GPM
• Min Flow Rate: 1 GPM
• Max Pressure: 5,000 PSI
• Min Pressure: 1,000 PSI
• Max Temp: 212° F.( Optimum foam created 130°F or less)
• Inlet: 3/8” Female
• Outlet: 3/8” Female
• Hose Barbs: .35” ID hose
• See the ST-167 System Diagram (3rd Picture)
• Weight: 2.38 lb

Please use Nozzle Chart to determine proper nozzle size

Note: If between sizes, choose the larger nozzle size

Nozzle Chart

Suttner ST-285 Unloader Valve 3,625 PSI 26 GPM 1/2" F. Suttner unloader valve ST-285 for high flow rates. Particularly durable! High-quality combination of materials

Features:
• Soft switching behavior
• Fatigue-free spring
• Particularly easy to maintain
• Low pressure drop
• Sealing seats in high grade stainless steel and Ceramic ball in bypass

Flyer

Specifications:
• Max Pressure: 3,625 PSI
• Flow Rate: 26 GPM
• Max Temperature: 194° F
• Inlet Port: 1/2" F
• Outlet Port: 1/2” F
• Bypass Port: 1/2” F
• Weight: 2.10 lbs

Suttner ST-275 Stainless Steel Unloader Valve 7,250 PSI 10.5 GPM 3/8”F x 1/2" F. Stainless steel design. Particularly durable

Features:
• Smooth switching behavior
• All media-contacting parts made of stainless steel
• Pressure reduction in hose and gun in bypass operation to below 40% of the working pressure
• The sealing system does not require any moving high-pressure soft seals and is characterized by a particularly long service life
• High pressure connections suitable for sealing with bonded seals
• Valve ball made of high-performance ceramic

Flyer

Specifications:
• Max Pressure: 7,250 PSI
• Flow Rate: 10.5 GPM
• Max Temperature: 194° F
• Inlet Port: 3/8" F
• Outlet Port: 1/2” F
• Bypass Port: 3/8” F
• Weight: 2.73 lbs

Suttner ST-275 Stainless Steel Unloader Valve 7,250 PSI 10.5 GPM 3/8”F x 1/2" F with Switch. Stainless steel design. Particularly durable

Features:
• Smooth switching behavior
• All media-contacting parts made of stainless steel
• Pressure reduction in hose and gun in bypass operation to below 40% of the working pressure
• The sealing system does not require any moving high-pressure soft seals and is characterized by a particularly long service life
• High pressure connections suitable for sealing with bonded seals
• Valve ball made of high-performance ceramic

Flyer

Specifications:
• Max Pressure: 7,250 PSI
• Flow Rate: 10.5 GPM
• Max Temperature: 194° F
• Maximum inrush current 10mA-5A(2A)
• VoItage: 12-24VDC 12-250VAC
• Protection CIass: IP65
• CabIe:1.2 meters 3xAWG20
• Inlet Port: 3/8" F
• Outlet Port: 1/2” F
• Bypass Port: 3/8” F
• Weight: 2.86 lbs

Suttner ST-285 Unloader Valve 3,625 PSI 26 GPM 1/2" F with Switch. Suttner unloader valve ST-285 for high flow rates. Particularly durable! High-quality combination of materials

Features:
• Soft switching behavior
• Fatigue-free spring
• Particularly easy to maintain
• Low pressure drop
• Sealing seats in high grade stainless steel and Ceramic ball in bypass

Flyer

Specifications:
• Max Pressure: 3,625 PSI
• Flow Rate: 26 GPM
• Max Temperature: 194° F
• Maximum inrush current 10mA-5A(2A)
• VoItage: 12-24VDC 12-250VAC
• Protection CIass: IP65
• CabIe:1.2 meters 3xAWG20
• Inlet Port: 1/2" F
• Outlet Port: 1/2” F
• Bypass Port: 1/2” F
• Weight: 2.10 lbs

Suttner ST-51.1 Variable Spray Nozzle 1/2" M 900 PSI. Nozzle-Twist: The jet can be changed from a conical, wide spray jet to a long-distance pencil jet.

Features
• Internal parts of the surge nozzle are made entirely of stainless stee
• Handwheel cover made of food-approved plastic
• Change the shape of the jet by simply turning the adjustable nozzle
• Adjustable cone sprays from 0° to 90°

Specifications
• Inlet: 1/2” M
• Maximum Pressure: 900 PSI
• Max. Flow Rate: 21 GPM
• Max. Temp.: 196º F.
• Weight: 0.39 lb

Suttner 2,170 PSI Foot Valve with ST-2320 Gun 21 GPM 1/2” FPT Swivel Inlet & 1/2” Outlet. Foot controlled valves allow both hands to be free to control the sewer hose. Pulling sewer hose back and forth flushes the pipes. ST-2320 Trigger gun has stainless steel/brass components which create a durable long lasting trigger gun

Features:
• Pedal and valve are in protective housing
• Inlet and outlet are positioned to help keep hose out of the way
• Heavy gauge steel construction for durability and stability
• Gun foot valve houses a ST-2320 spray gun used as a control valve
• High-quality design with EPDM seal and PEEK valve piston
• Can be used in other applications

Specifications:
• Inlet (Stainless Steel): 1/2” FPT Swivel
• Outlet (Stainless Steel): 1/2” FPT
• Maximum Pressure: 2,170 PSI
• Max. Flow Rate: 21 GPM
• Max. Temp.: 300º F.
• Weight: 15 lbs.

Suttner ST-5 High Flow Switch 16 GPM 1/2" FPT  3,046 PSI. Mounts in any position with a free floating magnet configuration

Features:
• Can be mounted horizontal or vertical
• Mounts further downstream in pumping system than traditional vacuum switches, thereby minimizing potential leak points that can cause vacuum switches to close
• Easy brass reed switch replacement

Specifications:
• Max. Pressure: 3,046 PS
• Min. Pressure: 75 PSI
• Max. Flow Rate: 16 GPM
• Min. Flow Rate: 4 GPM
• Contact: 1 A - 250 V
• Max: Fluid Temperature: 176° F
• Cable Length: 47.0”
• Inlet & Outlet: 1/2” FPT
• Housing: Brass
• Color: Black
• Weight: 0.98 lbs

Suttner ST-164 Injector Nozzle 1.8mm

• Nozzle Size: 1.8mm
• Material: Stainless Steel
• Weight: 0.10

Suttner ST-2320 Trigger Gun 2,170 PSI 21 GPM 1/2" SS Swivel Inlet 1/2" SS Outlet. The sturdy low- and medium-pressure gun made of plastics intended to come into contact with food and fitted with a high-quality brass/stainless steel valve

Features
• The rounded design of gun and handle prevent quick soiling and facilitate maintenance
• Comfortable ergonomic hand grip design
• Easy-Pull is designed for operators and applications with high-volume of trigger cycling
• The ST-2320 guns can be used everywhere: Industry, automotive, street cleaning, and towns
• Made of plastics intended to come into contact with food according to the Directive 1935/2004/EC
• Especially suitable for the food industry
• Ideal for soft wash systems
• Valve piston made of stainless steel
• High-quality design with EPDM seal and PEEK valve piston

ST-2320 Data Sheet

Specifications
• Inlet (Stainless Steel): 1/2” FPT Swiveling by 360°
• Outlet (Stainless Steel): 1/2” FPT
• Maximum Pressure: 2,170 PSI
• Max. Flow Rate: 21 GPM
• Max. Temp.: 300º F.
• Optional: Adjustable nozzle ST-51.1 # 200051750
• Weight: 1.75 lb

Suttner ST-164 Compressed Air Check Valve 1/4" Male x: M18

• Inlet: 1/4" Male
• Outlet: M18 Male Includes O-Ring
• Material: Stainless Steel
• Weight: 0.79

Suttner ST-303 Nickel-Plated Brass & Stainless Steel Swivel 4,000 PSI 1/4 MPT x 1/4 FPT Designed to be used as high-pressure swivel that easily attaches to spray guns, hose connections, hydraulics, and other tangle-free applications

Features
• Our dual bearing inner shaft design delivers consistent rotation even at high
• Swivel is made of stainless steel and nickel-plated brass for corrosion resistance and longevity
• Dual bearing system
• Good for chemicals with a pH of 3 to 12

Specifications
• Max Pressure: 4,000 PSI
• Max Flow: 12 GPM
• Max Temp: 250° F.
• Inlet: 1/4" Male NPT
• Outlet: 1/4" Female NPT
• Weight: 0.25 lb

Suttner ST-303 Nickel-Plated Brass & Stainless Steel Swivel 4,000 PSI 3/8 MPT x 3/8 FPT Designed to be used as high-pressure swivel that easily attaches to spray guns, hose connections, hydraulics, and other tangle-free applications

Features
• Our dual bearing inner shaft design delivers consistent rotation even at high
• Swivel is made of stainless steel and nickel-plated brass for corrosion resistance and longevity
• Dual bearing system
• Good for chemicals with a pH of 3 to 12

Specifications
• Max Pressure: 4,000 PSI
• Max Flow: 12 GPM
• Max Temp: 250° F.
• Inlet: 3/8" Male NPT
• Outlet: 3/8" Female NPT
• Weight: 0.30 lb

Suttner ST-265 Pressure Compensating Unloader Valve 5,070 PSI.

Features:
• Soft switching behavior
• Fatigue-free spring
• Particularly easy to maintain
• Low pressure drop
• Valve elements made of high-grade stainless steel and ceramic

Flyer

Specifications:
• Pressure:1,000 - 5,070 PSI
• Flow Rate: 13 GPM
• Max Temperature: 176° F
• Inlet Port: 3/8" FPT
• Outlet Port: 3/8” FPT
• Bypass Ports (2): 3/8” FPT
• Weight: 2.10 lbs

Suttner ST-265 Pressure Compensating Unloader Valve 5,070 PSI with Switch.

Features:
• Soft switching behavior
• Fatigue-free spring
• Particularly easy to maintain
• Low pressure drop
• Valve elements made of high-grade stainless steel and ceramic

Flyer

Specifications:
• Pressure:1,000 - 5,070 PSI
• Flow Rate: 13 GPM
• Max Temperature: 176° F
• Maximum inrush current 10mA-5A(2A)
• VoItage: 12-24VDC 12-250VAC
• Protection CIass: IP65
• CabIe:1.2 meters 3xAWG20
• Inlet Port: 3/8" FPT
• Outlet Port: 3/8” FPT
• Bypass Ports (2): 3/8” FPT
• Weight: 2.25 lbs