Suttner America

Suttner #9 ST-176 Stainless Steel 27.5” Foam Blaster Lance 3,625 PSI with 1/4" F Inlet. Switch from foam to rinse by turning the valve that’s conveniently within hands reach

Features
• The ST-176 Foam Blaster lance is the ideal accessory for Suttner's foam injector line. The innovative change-over technology allows to direct the full flow into either one or the other outlet pipe just by turning the hand wheel at the inlet
• In one position of the hand wheel the flow is directed thru an ST-76 foam blaster head for foaming. After changing over the full flow is directed thru the other pipe
• Includes 3 Injector nozzles
• Wash or rinse nozzle sold separately

Specifications
• Flow Rate: 6.0 – 16.0 GPM
• Max Pressure: 3,625 PSI
• Overall Length: ”
• Max Temp: 212° F.
• Inlet: 1/4" Female NPT
• Outlet (Foam): #9 ST-76 Foam Blaster head
• Outlet (Rinse): 1/4" Male (Nozzle not included)
• Note: Suttner (ST-160, ST-160M or St-164 Chemical or Foam injector) and rinse/wash nozzle required and are not included
• Weight: 3.45 lb

Please use Nozzle Chart to determine proper spray nozzle size

Nozzle Chart

Use Spray Nozzle Size and Foam Nozzle Chart to determine correct Air Injector Nozzle to use

Foam Nozzle Chart

Suttner #15 ST-176 Stainless Steel 27.5” Foam Blaster Lance 3,625 PSI with 1/4" F Inlet. Switch from foam to rinse by turning the valve that’s conveniently within hands reach

Features
• The ST-176 Foam Blaster lance is the ideal accessory for Suttner's foam injector line. The innovative change-over technology allows to direct the full flow into either one or the other outlet pipe just by turning the hand wheel at the inlet
• In one position of the hand wheel the flow is directed thru an ST-76 foam blaster head for foaming. After changing over the full flow is directed thru the other pipe
• Includes 3 Injector nozzles
• Wash or rinse nozzle sold separately

Specifications
• Flow Rate: 6.0 – 16.0 GPM
• Max Pressure: 3,625 PSI
• Overall Length: ”
• Max Temp: 212° F.
• Inlet: 1/4" Female NPT
• Outlet (Foam): #15 ST-76 Foam Blaster head
• Outlet (Rinse): 1/4" Male (Nozzle not included)
• Note: Suttner (ST-160, ST-160M or St-164 Chemical or Foam injector) and rinse/wash nozzle required and are not included
• Weight: 3.45 lb

Please use Nozzle Chart to determine proper spray nozzle size

Nozzle Chart

Use Spray Nozzle Size and Foam Nozzle Chart to determine correct Air Injector Nozzle to use

Foam Nozzle Chart

Suttner #30 ST-176 Stainless Steel 27.5” Foam Blaster Lance 3,625 PSI with 1/4" F Inlet. Switch from foam to rinse by turning the valve that’s conveniently within hands reach

Features
• The ST-176 Foam Blaster lance is the ideal accessory for Suttner's foam injector line. The innovative change-over technology allows to direct the full flow into either one or the other outlet pipe just by turning the hand wheel at the inlet
• In one position of the hand wheel the flow is directed thru an ST-76 foam blaster head for foaming. After changing over the full flow is directed thru the other pipe
• Includes 3 Injector nozzles
• Wash or rinse nozzle sold separately

Specifications
• Flow Rate: 6.0 – 16.0 GPM
• Max Pressure: 3,625 PSI
• Overall Length: ”
• Max Temp: 212° F.
• Inlet: 1/4" Female NPT
• Outlet (Foam): #30 ST-76 Foam Blaster head
• Outlet (Rinse): 1/4" Male (Nozzle not included)
• Note: Suttner (ST-160, ST-160M or St-164 Chemical or Foam injector) and rinse/wash nozzle required and are not included
• Weight: 3.45 lb

Please use Nozzle Chart to determine proper spray nozzle size

Nozzle Chart

Use Spray Nozzle Size and Foam Nozzle Chart to determine correct Air Injector Nozzle to use

Foam Nozzle Chart

Suttner #19.5 ST-176 Stainless Steel 27.5” Foam Blaster Lance 3,625 PSI with 1/4" F Inlet. Switch from foam to rinse by turning the valve that’s conveniently within hands reach

Features
• The ST-176 Foam Blaster lance is the ideal accessory for Suttner's foam injector line. The innovative change-over technology allows to direct the full flow into either one or the other outlet pipe just by turning the hand wheel at the inlet
• In one position of the hand wheel the flow is directed thru an ST-76 foam blaster head for foaming. After changing over the full flow is directed thru the other pipe
• Includes 3 Injector nozzles
• Wash or rinse nozzle sold separately

Specifications
• Flow Rate: 6.0 – 16.0 GPM
• Max Pressure: 3,625 PSI
• Overall Length: ”
• Max Temp: 212° F.
• Inlet: 1/4" Female NPT
• Outlet (Foam): #19.5 ST-76 Foam Blaster head
• Outlet (Rinse): 1/4" Male (Nozzle not included)
• Note: Suttner (ST-160, ST-160M or St-164 Chemical or Foam injector) and rinse/wash nozzle required and are not included
• Weight: 3.45 lb

Please use Nozzle Chart to determine proper spray nozzle size

Nozzle Chart

Use Spray Nozzle Size and Foam Nozzle Chart to determine correct Air Injector Nozzle to use

Foam Nozzle Chart

Suttner Injector Check Valve With Hose Barb "Extreme"

Parts Breakdown

Highest chemical resistance With o-ring

Suttner ST-160 Stainless Steel Single Chemical Injector w/9 Metering / Dosing Nozzles, #14, 5000 PSI, 3/8" F x 3/8” M

Features
• Food grade quality and specifications
• Durable Stainless Steel housing
• 9 Metering / dosing nozzles included (See 2nd picture)
• Uses .35" I.D. Hose

Specifications
• Nozzle/Orifice Size: 14
• Max Flow Rate: 18 GPM
• Min Flow Rate: 1 GPM
• Max Pressure: 5,000 PSI
• Min Pressure: 1,000 PSI
• Max Temp: 194° F.
• Inlet: 3/8” Female
• Outlet: 3/8” Male
• Hose Barb: .35” ID hose
• Weight: 0.71 lb

Please use Nozzle Chart to determine proper nozzle size

Note: If between sizes, choose the larger nozzle size

Nozzle Chart

See the ST-160 System Diagram below to determine the foam components needed

ST-160 System Diagram

Suttner ST-10 Nozzle Protector 1/4" F Black & Red

Features
• 2-Component nozzle protector ST-10
• The ST-10 is the ideal combination made out of hard and soft plastics
• The nozzle protector is suitable for cold and hot water applications in the car wash, agriculture and food industry
• The ST-10 is unimpeachable, protects your nozzles and preserves the surfaces to be cleaned at the same time

Specifications
• Suitable for nozzles 1/4" M NPT
• Material: Plastic / Zinc-plated steel
• Color: Black / red
• Max PSI: 5,800
• Max Temp: 300° F.
• Inlet:: 1/4" Female NPT
• Outlet: 1/4" Female NPT
• Note: 1/4” MPT Nozzle not included
• Weight: 0.10 lbs

Suttner ST-10 Nozzle Protector 1/4" F Black & Black

Features
• 2-Component nozzle protector ST-10
• The ST-10 is the ideal combination made out of hard and soft plastics
• The nozzle protector is suitable for cold and hot water applications in the car wash, agriculture and food industry
• The ST-10 is unimpeachable, protects your nozzles and preserves the surfaces to be cleaned at the same time

Specifications
• Suitable for nozzles 1/4" M NPT
• Material: Plastic / Zinc-plated steel
• Color: Black / black
• Max PSI: 5,800
• Max Temp: 300° F.
• Inlet:: 1/4" Female NPT
• Outlet: 1/4" Female NPT
• Note: 1/4” MPT Nozzle not included
• Weight: 0.10 lbs

Suttner ST-10 Nozzle Protector 1/4" F Black & Blue

Features
• 2-Component nozzle protector ST-10
• The ST-10 is the ideal combination made out of hard and soft plastics
• The nozzle protector is suitable for cold and hot water applications in the car wash, agriculture and food industry
• The ST-10 is unimpeachable, protects your nozzles and preserves the surfaces to be cleaned at the same time

Specifications
• Suitable for nozzles 1/4" M NPT
• Material: Plastic / Zinc-plated steel
• Color: Black / blue
• Max PSI: 5,800
• Max Temp: 300° F.
• Inlet:: 1/4" Female NPT
• Outlet: 1/4" Female NPT
• Note: 1/4” MPT Nozzle not included
• Weight: 0.10 lbs

Suttner ST-9H Vented Lance Grip with Side Handle. Ideal for hot water applications

Specifications
• Vented grip allows heat to dissipate providing a cooler handle
• Easily adjusts anywhere on lance for anyone's desired ergonomic position
• 15 inches in length
• Weight: .62 lb

Suttner ST-23 Turbo Foam Brush with # 10 Orifice. Foam like your at a car wash, brush bristles made from Chinese Highland Hogs, soft for delicate surfaces

Features
• Brush bristles are made from Chinese Highland Hogs for soft delicate surfaces
• Reduces chemical intake without changing foam quality
• Lasts longer and doesn't lose its shape

See ST-23 Turbo Foam Brush in action on YouTube

Specifications
• Orifice Size: 10.0
• Max Flow: 6.0 GPM
• Max Pressure: 2,200 PSI
• Max Temp: 122° F.
• Inlet: 1/4" FPT
• Weight: 1.35 lb

Suttner ST-23 Turbo Foam Brush with # 13 Orifice. Foam like your at a car wash, brush bristles made from Chinese Highland Hogs, soft for delicate surfaces

Features
• Brush bristles are made from Chinese Highland Hogs for soft delicate surfaces
• Reduces chemical intake without changing foam quality
• Lasts longer and doesn't lose its shape

See ST-23 Turbo Foam Brush in action on YouTube

Specifications
• Orifice Size: 13.0
• Max Flow: 6.0 GPM
• Max Pressure: 2,200 PSI
• Max Temp: 122° F.
• Inlet: 1/4" FPT
• Weight: 1.35 lb

Suttner ST-23 Turbo Foam Brush with # 8.0 Orifice. Foam like your at a car wash, brush bristles made from Chinese Highland Hogs, soft for delicate surfaces

Features
• Brush bristles are made from Chinese Highland Hogs for soft delicate surfaces
• Reduces chemical intake without changing foam quality
• Lasts longer and doesn't lose its shape

See ST-23 Turbo Foam Brush in action on YouTube

Specifications
• Orifice Size: 8.0
• Max Flow: 6.0 GPM
• Max Pressure: 2,200 PSI
• Max Temp: 122° F.
• Inlet: 1/4" FPT
• Weight: 1.35 lb

Suttner ST-23 Turbo Foam Brush with # 4.0 Orifice. Foam like your at a car wash, brush bristles made from Chinese Highland Hogs, soft for delicate surfaces

Features
• Brush bristles are made from Chinese Highland Hogs for soft delicate surfaces
• Reduces chemical intake without changing foam quality
• Lasts longer and doesn't lose its shape

See ST-23 Turbo Foam Brush in action on YouTube

Specifications
• Orifice Size: 4.0
• Max Flow: 6.0 GPM
• Max Pressure: 2,200 PSI
• Max Temp: 122° F.
• Inlet: 1/4" FPT
• Weight: 1.35 lb