Suttner America

Suttner ST-72 Stainless Steel 23.5” Vented Grip Foam Lance with #3.0 mm (Blue) Air Injector Nozzle and 1/4" M Inlet. In conjunction with a spray gun and Suttner foam injector, allows cleaning agents or disinfectants to be applied evenly over a large surface. Stainless steel construction

Features
• Thick foam is produced when air flows through vented injector housing and mixes with water and chemical stream
• Wet foam allows more efficient use of chemical
• More durable than conventional foamers

Specifications
• Air Injector Nozzle Size: 3.0 mm (Blue)
• Max Pressure: 3,625 PSI
• Length: 23.5”
• Max Temp: 176° F.
• Inlet: 1/4" Male
• Note: Suttner ST-160, ST-160M or St-164 Chemical or Foam injector required and is not included
• Weight: 1.95 lb

Please use Nozzle Chart to determine proper Spray Nozzle Size

Nozzle Chart

Use Spray Nozzle Size and Foam Lance Chart to determine correct Air Injector Nozzle Size to use

Foam Lance Chart

Suttner ST-72 Stainless Steel 23.5” Vented Grip Foam Lance with #2.3 mm (Yellow) Air Injector Nozzle and 1/4" M Inlet. In conjunction with a spray gun and Suttner foam injector, allows cleaning agents or disinfectants to be applied evenly over a large surface. Stainless steel construction

Features
• Thick foam is produced when air flows through vented injector housing and mixes with water and chemical stream
• Wet foam allows more efficient use of chemical
• More durable than conventional foamers

Specifications
• Air Injector Nozzle Size: 2.3 mm (Yellow)
• Max Pressure: 3,625 PSI
• Length: 23.5”
• Max Temp: 176° F.
• Inlet: 1/4" Male
• Note: Suttner ST-160, ST-160M or St-164 Chemical or Foam injector required and is not included
• Weight: 1.95 lb

Please use Nozzle Chart to determine proper Spray Nozzle Size

Nozzle Chart

Use Spray Nozzle Size and Foam Lance Chart to determine correct Air Injector Nozzle Size to use

Foam Lance Chart

Suttner ST-72 Stainless Steel 23.5” Vented Grip Foam Lance with #2.0 mm (Green) Air Injector Nozzle and 1/4" M Inlet. In conjunction with a spray gun and Suttner foam injector, allows cleaning agents or disinfectants to be applied evenly over a large surface. Stainless steel construction

Features
• Thick foam is produced when air flows through vented injector housing and mixes with water and chemical stream
• Wet foam allows more efficient use of chemical
• More durable than conventional foamers

Specifications
• Air Injector Nozzle Size: 2.0 mm (Green)
• Max Pressure: 3,625 PSI
• Length: 23.5”
• Max Temp: 176° F.
• Inlet: 1/4" Male
• Note: Suttner ST-160, ST-160M or St-164 Chemical or Foam injector required and is not included
• Weight: 1.95 lb

Please use Nozzle Chart to determine proper Spray Nozzle Size

Nozzle Chart

Use Spray Nozzle Size and Foam Lance Chart to determine correct Air Injector Nozzle Size to use

Foam Lance Chart

Suttner ST-7.1 Pressure Switch, 580 Switching Point (Black), 1/4" M 4,350 PSI

Features:
• IP 65 protection class
• Simultaneous N/O and N/C connection is possible
• The design of the micro switch allows comparably high inrush current (20 Amps N/C, 15 Amps N/O)
• The electrical capacity of the switch is 10.1 Amps (resistive load)
• No ingress of towing water into the environment of the microswitch possible

Suttner ST-7.1 Data Sheet

Specifications:
• Switch Point: 580 PSI (Black)
• Max. Pressure: 4,350 PS
• Voltage: 10.1 A - 250 VAC
• Max: Fluid Temperature: 194° F
• Cable Length: 37.4”
• Thread: 1/4” Male
• Material: Brass / plastic
• Protection Class” IP 65
• Weight: 0.65 lbs

Suttner ST-7.1 Pressure Switch, 360 Switching Point (Red), 1/4" M 4,350 PSI

Features:
• IP 65 protection class
• Simultaneous N/O and N/C connection is possible
• The design of the micro switch allows comparably high inrush current (20 Amps N/C, 15 Amps N/O)
• The electrical capacity of the switch is 10.1 Amps (resistive load)
• No ingress of towing water into the environment of the microswitch possible

Suttner ST-7.1 Data Sheet

Specifications:
• Switch Point: 360 PSI (Red)
• Max. Pressure: 4,350 PS
• Voltage: 10.1 A - 250 VAC
• Max: Fluid Temperature: 194° F
• Cable Length: 37.4”
• Thread: 1/4” Male
• Material: Brass / plastic
• Protection Class” IP 65
• Weight: 0.65 lbs

Features:
• Can be mounted horizontal or vertical
• Micro-switch replaces reed switch for better reliability and water protection
• Easy to install
• Resistant against shock and vibration
• IP 65 rated-water and dust proof
• Can be wired normally open or normally closed

Specifications:
• Switch Point: 1.2 GPM
• Max. Pressure: 5,000 PS
• Max. Flow Rate: 12 GPM
• Max Voltage: 250 V
• Max Current: 10.1 Amps
• Max: Fluid Temperature: 176° F
• Cable Length: 47.0”
• Inlet & Outlet: 3/8” FNPT
• Weight: 0.80 lbs

Features:
• Can be mounted horizontal or vertical
• Micro-switch replaces reed switch for better reliability and water protection
• Easy to install
• Resistant against shock and vibration
• IP 65 rated-water and dust proof
• Can be wired normally open or normally closed

Specifications:
• Switch Point: 0.3 GPM
• Max. Pressure: 5,000 PS
• Max. Flow Rate: 12 GPM
• Max Voltage: 250 V
• Max Current: 10.1 Amps
• Max: Fluid Temperature: 176° F
• Cable Length: 47.0”
• Inlet & Outlet: 3/8” FNPT
• Weight: 0.80 lbs

Features:
• Simply turn the knob to the desired side and setting on the easy to read legend plate
• Industry standard for panel mount chemical metering valves
• Volume flow is adjustable from 0 up to .27 GPM

Specifications:
• Draw Rate: 0 - 10%
• Flow Rate: 0.27 GPM
• Max Temperature: 140° F
• Weight: 0.16 lbs

Features:
• Designed to introduce detergents into the water system upstream from the pump at high pressure
• The "on-off" plunger is then used to control the injection
• Easily connects to inlet of pump at garden hose connection
• Adjustable chemical flow
• Chemical strainer and 4’ PVC tubing included
• Choose size based on flow rate of your pressure washer

See the ST-64 in action on YouTube

Specifications:
• Size: 4.0 to 7.0 GPM flow rate
• Max Temperature: 140° F
• Inlet: 3/4" FGH (female garden hose)
• Outlet: 3/4" MGH (male garden hose)
• Optional ST-61 chemical metering valve adjusts from off to full flow
• Weight: 0.78 lb

Features:
• Designed to introduce detergents into the water system upstream from the pump at high pressure
• The "on-off" plunger is then used to control the injection
• Easily connects to inlet of pump at garden hose connection
• Adjustable chemical flow
• Chemical strainer and 4’ PVC tubing included
• Choose size based on flow rate of your pressure washer

See the ST-64 in action on YouTube

Specifications:
• Size: 4.0 to 7.0 GPM flow rate
• Max Temperature: 140° F
• Inlet: 1/2" Female NPT
• Outlet: 1/2" Male NPT
• Optional ST-61 chemical metering valve adjusts from off to full flow
• Weight: 0.80 lb

Features:
• Designed to introduce detergents into the water system upstream from the pump at high pressure
• The "on-off" plunger is then used to control the injection
• Easily connects to inlet of pump at garden hose connection
• Adjustable chemical flow
• Chemical strainer and 4’ PVC tubing included
• Choose size based on flow rate of your pressure washer

See the ST-64 in action on YouTube

Specifications:
• Size: 1.5 to 4.0 GPM flow rate
• Max Temperature: 140° F
• Inlet: 3/4" FGH (female garden hose)
• Outlet: 3/4" MGH (male garden hose)
• Optional ST-61 chemical metering valve adjusts from off to full flow
• Weight: 0.78 lb

Features:
• Designed to introduce detergents into the water system upstream from the pump at high pressure
• The "on-off" plunger is then used to control the injection
• Easily connects to inlet of pump at garden hose connection
• Adjustable chemical flow
• Chemical strainer and 4’ PVC tubing included
• Choose size based on flow rate of your pressure washer

See the ST-64 in action on YouTube

Specifications:
• Size: 1.5 to 4.0 GPM flow rate
• Max Temperature: 140° F
• Inlet: 1/2" Female NPT
• Outlet: 1/2" Male NPT
• Optional ST-61 chemical metering valve adjusts from off to full flow
• Weight: 0.80 lb

Features:
• Draw Rate:0 - 11%
• Connects to chemical inlet barb without any special tools needed
• Made of glass filled poly-material, extremely corrosive resistant

Specifications:
• Flow Rate: 0.27 GPM
• Max Temperature: 140° F
• Weight: 0.06 lbs

Suttner ST-60F Brass Injector, Up to 6.5 Orifice, 3/8" M x 3/8" F. The ST-60F is a downstream chemical injector that relies on a pressure drop that is created by using a larger orifice spray nozzle

Features
• Siphon rate approximately 10:1
• Stainless steel spring and ball
• Fixed flow rate for accuracy
• Forged brass housing

Specifications
• Orifice Size: Up to 6.5
• Injector Size: 1.8 mm
• Max Pressure: 3,600 PSI
• Max Temp: 140° F.
• Inlet: 3/8” Male NPT
• Outlet: 3/8” Female NPT
• Hose Barb: 1/4” ID hose
• Weight: 0.20 lb

Suttner ST-60F Brass Injector, Up to 5.0 Orifice, 3/8" M x 3/8" F. The ST-60F is a downstream chemical injector that relies on a pressure drop that is created by using a larger orifice spray nozzle

Features
• Siphon rate approximately 10:1
• Stainless steel spring and ball
• Fixed flow rate for accuracy
• Forged brass housing

Specifications
• Orifice Size: Up to 5
• Injector Size: 1.6 mm
• Max Pressure: 3,600 PSI
• Max Temp: 140° F.
• Inlet: 3/8” Male NPT
• Outlet: 3/8” Female NPT
• Hose Barb: 1/4” ID hose
• Weight: 0.20 lb

Suttner ST-601C Inline Chemical Resistant Spray Gun 4,000 PSI with Ceramic Ball. Ideal for cleaning vertical and overhead surfaces. Perfect for washing tractors, trailers, siding, windows, eaves, etc.

Features
• High Quality, German engineered components
• Superior Chemical Resistant
• Horizontal flow-through design
• Heavy duty, impact-resistant trigger guard
• Forged brass housing for maximum strength
• Unitized valve allows for higher temps and longer life
• Ceramic ball in valve is highly resistant against nearly all soaps and acids

Specifications
• Max Pressure: 4,000 PSI
• Max Flow: 12.0 GPM
• Max Temp: 300° F.
• Inlet: 3/8" Female NPT
• Outlet: 1/4" Female NPT
• Weight: 1.16 lb

Features
• High Quality, German engineered components
• Horizontal flow-through design
• Forged brass housing for maximum strength
• Unitized valve for easy repair
• Stainless steel spring, needle, ball, and seat for chemical resistance
• Special heat and chemical resistant seals for optimum performance even in the harshest of environments

Specifications
• Max Pressure: 4,000 PSI
• Max Flow: 12.0 GPM
• Max Temp: 320° F.
• Inlet: 3/8" Female NPT
• Outlet: 1/4" Female NPT
• Weight: 1.16 lb

Suttner ST-6 Any Position Flow Switch. Mounts in any position and spring assisted brass magnet configuration

Features:
• Can be mounted horizontal or vertical
• Reed switch encased in protective vacuum sealed glass tube eliminating exposure to corrosive cleaning chemicals
• Mounts further downstream in pumping system than traditional vacuum switches, thereby minimizing potential leak points that can cause vacuum switches to close
• Easy reed switch replacement
• Most proven and reliable flow switches in the industry

Specifications:
• Max. Pressure: 5,070 PSI
• Min. Pressure: 75 PSI
• Max. Flow Rate: 8.0 GPM
• Min. Flow Rate: 1 GPM
• Contact: 1 A - 250 V
• Max: Fluid Temperature: 176° F
• Cable Length: 47.0”
• Inlet & Outlet: 3/8” MPT
• Housing: Brass
• Replaces 200006540
• Weight: 0.80 lbs

Suttner ST-58 Change Over Valve 5,000 PSI 1/4" FPT. Suttner ST58 change-over design allows you to switch between lances and nozzles with a twist

Features
• Stainless steel
• No roll over nozzle
• Corrosive resistant

Specifications
• Max Pressure: 5,000 PSI
• Max Temp: 200° F.
• Inlet: 1/4" Female NPT
• Outlets (2): 1/4" Female NPT
• Weight: 0.85 lbs

Features
• High Quality, German engineered components
• Simply turn over the complete assembly or swivel lance and you have access to two different nozzles
• Water sprays through one nozzle port at a time since a stainless steel ball covers the opposite port
• Nozzle housing is made of an impact resistant plastic, manufactured of corrosion resistant material
• Spray depends on 2 nozzles used

Specifications
• Max Pressure: 3,600 PSI
• Max Flow: 8 GPM
• Max Temp: 300° F.
• Inlet: 1/4" Female NPT
• Outlets (2): 1/4" Female NPT
• Note: 1/4” MPT Nozzles not included
• Weight: 0.51 lb