Wash Down Guns

PA RB 35 Blue Adjustable Width Spray Wash Down Gun with Inlet Swivel for Food Industry. RB35 suitable for use up to 175 PSI and 13.2 GPM

Features
• Low pressure washdown gun with body & housing in plastic material
• Water jet width adjustable by the trigger
    o Trigger completely drawn: pencil jet
    o Trigger released: 60° cone jet
• Plastic housing completely sealed
• Shockproof protective rings in soft rubber
• Inlet swivel
• Lightweight
• Reduced opening force

Specifications Sheet

Specifications
• Rated Pressure: 175 PSI
• Rated Flow Rate: 13.2 GPM
• Rated Temp: 120° F.
• Casing Color: Blue
• Gasket Material: Viton
• Piston Material: Brass
• Swivel Inlet: 1/2" Bsp F
• GP #: YG1317S
• Weight: 15.73 oz

Suttner Grey ST-1200B Brass Wash Down Gun 700 PSI 27 GPM. Ideal for high volume low pressure needs, such as farm, chemical or food industries. ST-1200 has forged brass housing for maximum strength

Features:
• Durable spray gun with rubber sheathing protects against cold, heat and impact
• Adjusting screw retains desired spray pattern
• Fixing clamp holds back trigger allowing comfort and steady spray

Specifications:
• Housing: Forged brass
• Inlet: 1/2” FNPT
• Maximum Pressure: 700 PSI
• Max. Flow Rate: 27 GPM
• Max. Temp.: 190º F.
• Color: Grey
• Weight: 1.86 lbs.

PA RB 65 Blue Adjustable Spray Wash Down Gun with 1/2" Bsp F Inlet for Food Industry. RB65 suitable for use up to 350 PSI and 16 GPM. Shockproof gun with adjustable conical/pencil jet

Features
• Low pressure washdown gun with conical/pencil jet controlled by the trigger
• Adjustable screw to vary cone width from 0° to 60°
• Covered by semi-housings of non-stainable shockproof plastic, entirely sealed and with 3 rubber protective rings.
• Plastic trigger protected by hand guard
• Minimum fatigue for trigger opening and use
• Internal structure in brass and Sst
• Ergonomic construction

Specifications Sheet

Specifications
• Rated Pressure: 350 PSI
• Rated Flow Rate: 16.0 GPM
• Rated Temp: 195° F.
• Max Temp Continuous Use: 140° F.
• Casing Color: Blue
• Seals Material: Viton
• Piston Material: Brass
• Inlet: 1/2" Bsp F
• GP #: YG1635
• Weight: 33.3 oz

PA RB 65 Blue Adjustable Spray Wash Down Gun with 1/2" Npt F Inlet for Food Industry. RB65 suitable for use up to 350 PSI and 16 GPM. Shockproof gun with adjustable conical/pencil jet

Features
• Low pressure washdown gun with conical/pencil jet controlled by the trigger
• Adjustable screw to vary cone width from 0° to 60°
• Covered by semi-housings of non-stainable shockproof plastic, entirely sealed and with 3 rubber protective rings.
• Plastic trigger protected by hand guard
• Minimum fatigue for trigger opening and use
• Internal structure in brass and Sst
• Ergonomic construction

Specifications Sheet

Specifications
• Rated Pressure: 350 PSI
• Rated Flow Rate: 16.0 GPM
• Rated Temp: 195° F.
• Max Temp Continuous Use: 140° F.
• Casing Color: Blue
• Seals Material: Viton
• Piston Material: Brass
• Inlet: 1/2" Npt F
• GP #: YG1635N
• Weight: 33.3 oz

PA RB 65 Blue Adjustable Spray Wash Down Gun with Inlet Swivel for Food Industry. RB65 suitable for use up to 350 PSI and 16 GPM. Shockproof gun with adjustable conical/pencil jet

Features
• Low pressure washdown gun with conical/pencil jet controlled by the trigger
• Adjustable screw to vary cone width from 0° to 60°
• Covered by semi-housings of non-stainable shockproof plastic, entirely sealed and with 3 rubber protective rings.
• Plastic trigger protected by hand guard
• Minimum fatigue for trigger opening and use
• Internal structure in brass and Sst
• Ergonomic construction
• Inlet swivel connection

Specifications Sheet

Specifications
• Rated Pressure: 350 PSI
• Rated Flow Rate: 16.0 GPM
• Rated Temp: 195° F.
• Max Temp Continuous Use: 140° F.
• Casing Color: Blue
• Seals Material: Viton
• Piston Material: Brass
• Swivel Inlet: 1/2" Bsp F
• GP #: YG1635S
• Weight: 37.39 oz

PA RB 65 Red Adjustable Spray Wash Down Gun with Inlet Swivel for Food Industry. RB65 suitable for use up to 350 PSI and 16 GPM. Shockproof gun with adjustable conical/pencil jet and Stainless Steel Piston

Features
• Low pressure washdown gun with conical/pencil jet controlled by the trigger
• Adjustable screw to vary cone width from 0° to 60°
• Covered by semi-housings of non-stainable shockproof plastic, entirely sealed and with 3 rubber protective rings.
• Plastic trigger protected by hand guard
• Minimum fatigue for trigger opening and use
• Internal structure in brass and Sst
• Ergonomic construction
• Inlet swivel connection

Specifications Sheet

Specifications
• Rated Pressure: 350 PSI
• Rated Flow Rate: 16.0 GPM
• Rated Temp: 195° F.
• Max Temp Continuous Use: 140° F.
• Casing Color: Red
• Seals Material: Viton
• Piston Material: aisi303 Sst
• Swivel Inlet: 1/2" Bsp F
• GP #: YG1635SR
• Weight: 37.39 oz

Features:
• Durable spray gun with rubber sheathing protects against cold, heat and impact
• Adjusting screw retains desired spray pattern
• Fixing clamp holds back trigger allowing comfort and steady spray
• Comes with trigger guard
• Food Grade

Specifications:
• Housing: Stainless steel
• Inlet: 1/2” FNPT
• Maximum Pressure: 700 PSI
• Max. Flow Rate: 27 GPM
• Max. Temp.: 190º F.
• Color: Blue
• Weight: 2.05 lbs.

General Pump YG36LA37SW Washdown Gun/Lance Assembly 8 GPM 3,650 PSI

Features:
• Minimizes fatigue for the operator
• Features inlet swivel
• 37 inch lance
• Shockproof resistant housing
• Stainless Steel seat and ball
• Internal construction of brass and Stainless Steel

Specifications:
• Maximum Volume: 8.0 GPM
• Maximum Discharge Pressure: 3,650 PSI
• Maximum Fluid Temperature: 195° F
• Inlet Port Thread: G 3/8” - F
• Ceramic Nozzle: #12 (2 mm)
• Materials: Stainless Steel, Brass, Plastic, Buna-N, Teflon
• Weight: 6.0 lbs

General Pump YG26LA34 Wash Down Gun/Lance Assembly 21 GPM 2,600 PSI

Features:
• Minimizes fatigue for the operator
• Ergonomic design
• 34 inch lance
• Shock resistant plastic housing
• Stainless Steel seat and ball
• Internal construction of brass and Stainless Steel

Specifications Sheet

Specifications:
• Maximum Volume: 21.0 GPM
• Maximum Discharge Pressure: 2,600 PSI
• Maximum Fluid Temperature: 109° F
• Inlet Port Thread: 1/2” NPT- F
• Ceramic Nozzle: #25 (3 mm)
• Materials: Stainless Steel, Brass, Plastic, Buna-N, Teflon
• Weight: 7.0 lbs

PA RB 65 Blue 316 Stainless Steel Adjustable Spray Wash Down Gun with Inlet Swivel for Food Industry. RB65 suitable for use up to 350 PSI and 16 GPM. Shockproof gun with adjustable conical jet suitable for corrosive liquids

Features
• Low pressure washdown gun with conical/pencil jet controlled by the trigger
• Adjustable screw to vary cone width from 0° to 60°
• Covered by semi-housings of non-stainable shockproof plastic, entirely sealed and with 3 rubber protective rings.
• Plastic trigger protected by hand guard
• Minimum fatigue for trigger opening and use
• Internal structure in Sst Aisi 316
• Ergonomic construction
• Inlet swivel connection

Specifications Sheet

Specifications
• Rated Pressure: 350 PSI
• Rated Flow Rate: 16.0 GPM
• Rated Temp: 195° F.
• Max Temp Continuous Use: 140° F.
• Casing Color: Blue
• Seals Material: Viton
• Internal Material: Stainless steel Aisi 316
• Swivel Inlet: 1/2" Bsp F
• GP #: YG1635SS
• Weight: 35.88 oz