General Pump

General Pump #5.0 Quick Connect (Q) Spray Nozzle 5-Pack

Features
• 5,000 PSI operating pressure
• Made in the USA
• Ceramic insert is resistant to wear
• Through-hardened stainless steel orifices offer superior wear resistance compared to standard case hardened nozzles
• Stainless steel housing resists cracking and wear
• Resistant to most chemical
• Large color coded tip protector on Q-type nozzles permits rapid identification of fan angle
• Laser marked for clarity and durability

Specifications
• Nozzle Size: 5.0
• Contents: One each of a 0º, 15º, 25º, 40º and 65º #40 soap nozzle
• Operating Pressure: 5,000 PSI
• Connection: 1/4” QC Plug
• Weight: 0.50 oz

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

General Pump #5.5 Quick Connect (Q) Spray Nozzle 5-Pack

Features
• 5,000 PSI operating pressure
• Made in the USA
• Ceramic insert is resistant to wear
• Through-hardened stainless steel orifices offer superior wear resistance compared to standard case hardened nozzles
• Stainless steel housing resists cracking and wear
• Resistant to most chemical
• Large color coded tip protector on Q-type nozzles permits rapid identification of fan angle
• Laser marked for clarity and durability

Specifications
• Nozzle Size: 5.5
• Contents: One each of a 0º, 15º, 25º, 40º and 65º #40 soap nozzle
• Operating Pressure: 5,000 PSI
• Connection: 1/4” QC Plug
• Weight: 0.50 oz

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

General Pump #6.0 Quick Connect (Q) Spray Nozzle 5-Pack

Features
• 5,000 PSI operating pressure
• Made in the USA
• Ceramic insert is resistant to wear
• Through-hardened stainless steel orifices offer superior wear resistance compared to standard case hardened nozzles
• Stainless steel housing resists cracking and wear
• Resistant to most chemical
• Large color coded tip protector on Q-type nozzles permits rapid identification of fan angle
• Laser marked for clarity and durability

Specifications
• Nozzle Size: 6.0
• Contents: One each of a 0º, 15º, 25º, 40º and 65º #40 soap nozzle
• Operating Pressure: 5,000 PSI
• Connection: 1/4” QC Plug
• Weight: 0.50 oz

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

General Pump #3.0 Quick Connect (Q) Spray Nozzle 5-Pack

Features
• 5,000 PSI operating pressure
• Made in the USA
• Ceramic insert is resistant to wear
• Through-hardened stainless steel orifices offer superior wear resistance compared to standard case hardened nozzles
• Stainless steel housing resists cracking and wear
• Resistant to most chemical
• Large color coded tip protector on Q-type nozzles permits rapid identification of fan angle
• Laser marked for clarity and durability

Specifications
• Nozzle Size: 3.0
• Contents: One each of a 0º, 15º, 25º, 40º and 65º #40 soap nozzle
• Operating Pressure: 5,000 PSI
• Connection: 1/4” QC Plug
• Weight: 0.50 oz

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

General Pump YYSTR12 Brass Y-Strainer 1/2" NPT-F 50 Mesh

Specifications
• Maximum Temperature: 194° F
• Maximum Pressure: 170 PSI
• Screen Mesh Size: 50 Mesh (300 Micron)
• Materials: Brass, Stainless Steel
• Port Sixes: 1/2” NPT-F
• Dimensions: 2.9” x 2.2” x 1.2”
• Weight: 0.30 Lbs

General Pump #1.8mm Adjustable Chemical Injector with Acid Kit, High Draw, Chemical Draw Up To 20% with 3/8" NPT-M. This 0 - 20% adjustable flow chemical injector is connected to the downstream side of the pressure pump and is activated when using a low pressure soap nozzle. Choose size based on flow rate of your pressure washer

Features
• Up tp a 20% injection draw rate
• Acid kit with ceramic check ball
• Made in the USA
• A cost effective solution to your chemical application needs

Injector Specifications:
• Size: # 1.8 mm (2.0 to 3.0 GPM)
• Max Operating Pressure: 4,500 PSI
• Max Temperature: 195° F
• Inlet: 3/8” NPT-M
• Outlet: 3/8” NPT-M
• Chemical Port: 1/4” Hose Barb
• Materials: Brass, Ceramic, Stainless Steel, Viton
• Note: If between sizes, choose the smaller injector size
• Weight: 0.30 lbs

General Pump #2.1mm Adjustable Chemical Injector with Acid Kit, High Draw, Chemical Draw Up To 20% with 3/8" NPT-M. This 0 - 20% adjustable flow chemical injector is connected to the downstream side of the pressure pump and is activated when using a low pressure soap nozzle. Choose size based on flow rate of your pressure washer

Features
• Up tp a 20% injection draw rate
• Acid kit with ceramic check ball
• Made in the USA
• A cost effective solution to your chemical application needs

Injector Specifications:
• Size: # 2.1 mm (3.0 to 5.0 GPM)
• Max Operating Pressure: 4,500 PSI
• Max Temperature: 195° F
• Inlet: 3/8” NPT-M
• Outlet: 3/8” NPT-M
• Chemical Port: 1/4” Hose Barb
• Materials: Brass, Ceramic, Stainless Steel, Viton
• Note: If between sizes, choose the smaller injector size
• Weight: 0.30 lbs

General Pump #2.3mm Adjustable Chemical Injector with Acid Kit, High Draw, Chemical Draw Up To 20% with 3/8" NPT-M. This 0 - 20% adjustable flow chemical injector is connected to the downstream side of the pressure pump and is activated when using a low pressure soap nozzle. Choose size based on flow rate of your pressure washer

Features
• Up tp a 20% injection draw rate
• Acid kit with ceramic check ball
• Made in the USA
• A cost effective solution to your chemical application needs

Injector Specifications:
• Size: # 2.3 mm (5.0 to 8.0 GPM)
• Max Operating Pressure: 4,500 PSI
• Max Temperature: 195° F
• Inlet: 3/8” NPT-M
• Outlet: 3/8” NPT-M
• Chemical Port: 1/4” Hose Barb
• Materials: Brass, Ceramic, Stainless Steel, Viton
• Note: If between sizes, choose the smaller injector size
• Weight: 0.30 lbs

General Pump 103073 Assembly, Pilot Valve

PA TR1 /GP YADJNOZ Adjustable Hi / Low Nozzle Holder. The adjustable nozzle holder TR1 can work with pressures up to 4,050 PSI and with flow rates up to 8 GPM

Features
• By turning the plastic protection it is possible to switch from high to low pressure
• This type of device is normally used with high-pressure cleaners that provide for the mixing of water with chemical product by means of a Venturi injector

Specifications
• Rated Pressure: 3,650 PSI
• Permissible Pressure: 4,050 PSI
• Rated Flow Rate: 8 GPM
• Rated Temperature: 300° F.
• Body Material: Brass
• Inlet: 1/4 Npt F
• Outlet: 1/4 Npt F
• Weight: 4.06 oz.
• Note: Requires one 1/4” MPT nozzle, which is not included

General Pump 100544 5,000 PSI Easy Start Valve 3/8” NPT-M Inlet & 1/8” NPT-F Outlet. Eases system start-up. Especially useful for engine-driven pressure washers

Features:
• Fits any brand pump
• Max working pressure of 5,000 PSI
• Designed and made in the USA
• Long-life construction
• Improved seal design limits leaks

Specifications:
• Maximum Pressure: 5,000 PSI
• Max Volume: 8 GPM
• Maximum Temperature: 195° F
• Inlet: 3/8" NPT-M
• Outlet: 1/8” NPT-F
• Materials: Brass, Stainless Steel, Thermoplastic
• Weight: 0.25 lbs

General Pump New & Improved DuraView Inlet Water Filter 1/2" MPT X 3/4 FGH with 1/4" Bypass Ports. For general purpose pressure wash use

Features
• NEW FEATURE: over-molded easy grip nut!
• Strongest see-through filter on the market
• Loadbearing brass spine
• Integrated garden hose connector
• Flow through design
• Clear plastic cover

Specifications
• Maximum Temperature: 180° F
• Max Volume: 8.0 GPM
• Maximum Operating Pressure: 150 PSI
• Minimum Operating Pressure: 15 PSI
• Materials: Brass, Stainless Steel, Buna-N
• Inlet: Female garden hose (FGH)
• Outlet: 1/2” NPT-M
• Bypass Ports: 1/4” NPT-F Bypass Port
• Dimensions: 1.125” x 3.75”
• Weight: 1.50 Lbs

General Pump DuraView Inlet Water Filter 1/2" MPT X 3/4 FGH. For general purpose pressure wash use

Features
• Strongest see-through filter on the market
• Loadbearing brass spine
• Integrated garden hose connector
• Flow through design
• Clear plastic cover

Specifications
• Maximum Temperature: 180° F
• Max Volume: 8.0 GPM
• Maximum Operating Pressure: 150 PSI
• Minimum Operating Pressure: 15 PSI
• Materials: Brass, Stainless Steel, Buna-N
• Inlet: Female garden hose (FGH)
• Outlet: 1/2” NPT-M
• Bypass Ports: None
• BE # 85.300.054
• Dimensions: 1.125” x 3.75”
• Weight: 1.50 Lbs

General Pump DuraView Inlet Water Filter 3/8" MPT X 3/4 FGH. For general purpose pressure wash use

Features
• Strongest see-through filter on the market
• Loadbearing brass spine
• Integrated garden hose connector
• Flow through design
• Clear plastic cover

Specifications
• Maximum Temperature: 180° F
• Max Volume: 8.0 GPM
• Maximum Operating Pressure: 150 PSI
• Minimum Operating Pressure: 15 PSI
• Materials: Brass, Stainless Steel, Buna-N
• Inlet: Female garden hose (FGH)
• Outlet: 3/8” NPT-M
• Bypass Ports: None
• Dimensions: 1.125” x 3.75”
• Weight: 1.50 Lbs

General Pump New & Improved DuraView Inlet Water Filter 3/8" MPT X 3/4 FGH with 1/4" Bypass Ports. For general purpose pressure wash use

Features
• NEW FEATURE: over-molded easy grip nut!
• Strongest see-through filter on the market
• Loadbearing brass spine
• Integrated garden hose connector
• Flow through design
• Clear plastic cover

Specifications
• Maximum Temperature: 180° F
• Max Volume: 8.0 GPM
• Maximum Operating Pressure: 150 PSI
• Minimum Operating Pressure: 15 PSI
• Materials: Brass, Stainless Steel, Buna-N
• Inlet: Female garden hose (FGH)
• Outlet: 3/8” NPT-M
• Bypass Ports: 1/4” NPT-F Bypass Port
• Dimensions: 1.125” x 3.75”
• Weight: 1.50 Lbs

Turbine, PA UR25 & UR32
PA # 25.1631.22

General 47200274 Pump Rail / Foot 2-5/8", 47, 66 Series, Tall

General Pump 100 Pack of Replacement 1/4" EPDM Quick Disconnect Coupler O-Ringe. EPDM is one of the most versatile and durable rubbers available, providing outstanding heat, weather, and ozone resistancee

Specifications
• Fits all standard 1/4" quick disconnect couplers
• Material: EPDM
• Max. Temperature: 250° F
• Color: Black
• Quantity: 100
• Weight: 1 oz

General Pump 100 Pack of Replacement 3/8" EPDM Quick Disconnect Coupler O-Ringe. EPDM is one of the most versatile and durable rubbers available, providing outstanding heat, weather, and ozone resistancee

Specifications
• Fits all standard 3/8" quick disconnect couplers
• Material: EPDM
• Max. Temperature: 250° F
• Color: Black
• Quantity: 100
• Weight: 1 oz

General Pump #2.3mm Adjustable Chemical Injector, High Draw, Chemical Draw Up To 20% with 3/8" NPT-M. This 0 - 20% adjustable flow chemical injector is connected to the downstream side of the pressure pump and is activated when using a low pressure soap nozzle. Choose size based on flow rate of your pressure washer

Features
• Up tp a 20% injection draw rate
• Made in the USA
• A cost effective solution to your chemical application needs

Injector Specifications:
• Size: # 2.3 mm (5.0 to 8.0 GPM)
• Max Operating Pressure: 4,500 PSI
• Max Temperature: 195° F
• Inlet: 3/8” NPT-M
• Outlet: 3/8” NPT-M
• Chemical Port: 1/4” Hose Barb
• Materials: Brass, Stainless Steel, Viton
• Note: If between sizes, choose the smaller injector size
• Weight: 0.30 lbs

General Pump 100534 6,000 PSI Safety Relief Valve 3/8” MPT-N. This safety relief valve is a manually adjustable pressure-operated device which, according to its setting releases the excess of water when the pressure inside the pump/system exceeds the adjusted value, thus reducing the pressure. The normal working conditions can be restored by turning off and then restarting the system

Features:
• High pressure safety valve: 2,500 – 6,000 PSI relief pressure
• One model fits all pressures - no springs to change
• Less “whistling” and chatter than competing brands
• Highly accurate over full range of pressures
• Fits any brand of pump
• Designed and made in the USA

Specifications:
• Adjustable Range: 2,500 - 6,000 PSI
• Max Volume: 6 GPM
• Discharge: End
• Max Temperature: 32 - 150° F
• Inlet: 3/8" NPT-M
• Dimensions: 2.6” x .875” Hex
• Weight: 0.325 lbs

General Pump #1.8mm Adjustable Chemical Injector, High Draw, Chemical Draw Up To 20% with 3/8" NPT-M. This 0 - 20% adjustable flow chemical injector is connected to the downstream side of the pressure pump and is activated when using a low pressure soap nozzle. Choose size based on flow rate of your pressure washer

Features
• Up tp a 20% injection draw rate
• Made in the USA
• A cost effective solution to your chemical application needs

Injector Specifications:
• Size: # 1.8 mm (2.0 to 3.0 GPM)
• Max Operating Pressure: 4,500 PSI
• Max Temperature: 195° F
• Inlet: 3/8” NPT-M
• Outlet: 3/8” NPT-M
• Chemical Port: 1/4” Hose Barb
• Materials: Brass, Stainless Steel, Viton
• Note: If between sizes, choose the smaller injector size
• Weight: 0.30 lbs

General Pump #2.1mm Adjustable Chemical Injector, High Draw, Chemical Draw Up To 20% with 3/8" NPT-M. This 0 - 20% adjustable flow chemical injector is connected to the downstream side of the pressure pump and is activated when using a low pressure soap nozzle. Choose size based on flow rate of your pressure washer

Features
• Up tp a 20% injection draw rate
• Made in the USA
• A cost effective solution to your chemical application needs

Injector Specifications:
• Size: # 2.1 mm (3.0 to 5.0 GPM)
• Max Operating Pressure: 4,500 PSI
• Max Temperature: 195° F
• Inlet: 3/8” NPT-M
• Outlet: 3/8” NPT-M
• Chemical Port: 1/4” Hose Barb
• Materials: Brass, Stainless Steel, Viton
• Note: If between sizes, choose the smaller injector size
• Weight: 0.30 lbs

General Pump 2560001 Multi-Nozzle Holder (Accepts 1/4" MPT Nozzles)

Features
• This handy tool allows you to very quickly switch between four different nozzles on one spray gun wand.
• It accepts any 1/4" NPT-M thread spray nozzles and turns each one into a quick-connect tip.
• Works great for changing between foam and water, reaching multiple height levels, or altering the intensity of the spray without having to carry around several individual nozzles!
• Note: Nozzles not included.

Specifications

Specifications
• Dimensions: 0.70” H x 3.30” L
• Replaces JROD #6540
• Weight: 0.25 lb

General Pump 100323 5,000 PSI Easy Start Valve 3/8” NPT-M Inlet & 1/4” Hose Barb. Eases system start-up. Especially useful for engine-driven pressure washers

Features:
• Fits any brand pump
• Max working pressure of 5,000 PSI
• Designed and made in the USA
• Long-life construction
• Improved seal design limits leaks

Specifications:
• Maximum Pressure: 5,000 PSI
• Max Volume: 8 GPM
• Maximum Temperature: 195° F
• Inlet: 3/8" NPT-M
• Outlet: 1/4” Hose Barb
• Materials: Brass, Stainless Steel, Thermoplastic
• Weight: 0.25 lbs

General Pump PTP™ Series Pressure Washer Thermal Relief Valve with 3/8" Male Inlet. Protects the pump from damaging heat build-up while it is in bypass mode. The thermal relief valve, sensing a rise in temperature, opens and discharges a small amount of heated fluid. This allows cooler water to enter the system and cool the pump. When the gun is discharged the cooler water will cause the valve to close immediately.

Specifications:
• Compact Design - Shorter overall length
• Trip Temperature: 190º F.
• Brass body
• Inlet thread size: 3/8" MPT
• 1/4” Brass hose barb
• Mounts easily in the pump manifold,inlet water supply or bypass loop plumbing
• Weight: 1.5 oz

Specifications:
• Compact Design - Shorter overall length
• Trip Temperature: 190º F.
• Brass body
• Inlet thread size: 1/2" MPT
• 1/4” Brass hose barb
• Mounts easily in the pump manifold,inlet water supply or bypass loop plumbing
• Weight: 1.5 oz

General Pump 2100472 Low Pressure In-line Water Filter 1/2” NTP-F x 1/2” NTP-M with 1/4" Bypass Ports

Features
• Low-pressure in-line filter
• Rigid construction
• Stainless Steel mesh filter
• Die cast aluminum (anodized) housing and plastic cap
• No tools required for cleaning
• Ports for bypass hose and gauge

Specifications
• Max Volume: 8.0 GPM
• Maximum Pressure: 145 PSI
• Temperature: 176° F
• Filter: 50 Mesh
• Inlet: 1/2” NTP-F
• Outlet: 1/2” NPT-M
• Bypass Ports: 1/4” F
• Materials: Aluminum, Brass, Plastic, Buna-N
• Weight: 0.30 Lbs

General Pump 2100203 Swivel Repair Kit (Minor) for Duct Cleaner & Hammerhead Surface Cleaners

Specifications:
• Repair Kit For 2103220, 2103226 & 2103293 Swivels
• Weighs 0.95 lbs

General Pump DGE4012NT Hot/Cold Water Open Spray Gun (No Trigger) 4,000 PSI 12 GPM

Features:
• Always open / no trigger
• Additional venting for excellent high temperature performance
• Large comfortable hand grip to accommodate work gloves

Specifications:
• Max Volume: 12 GPM
• Max Pressure: 4,000 PSI
• Max Temp: 320° F.
• Inlet: 3/8" NPT-F
• Outlet: 1/4" NPT-F
• Note: Open, No Trigger
• Weight: 1.0 lbs

12 Pack General Pump D11008 Quick Disconnect Coupler Plugs Hardened Steel Zinc Plated 3/8” x 3/8" NPT-F 4,000 PSI

Features:
• Quick disconnect design
• Hardened Steel Zinc Plated

Package Contents:
• 12 QD Plugs

Specifications:
• Quick Disconnect Coupler: Plug
• Body Material: Hardened Steel
• Plug Size: 3/8"
• Thread: 3/8” NPT-F
• Max Temp: 175°
• Max Operating Pressure: 4,000 PSI
• Weight: 1.2 lb

General Pump D10091 Quick Disconnect Coupler Socket Stainless Steel 1/2” x 1/2" NPT-M 5,000 PSI

Features:
• Quick disconnect design
• 304 Stainless steel
• EPDM O-Ring

Specifications:
• Quick Disconnect Coupler: Socket
• Body Material: 304 Stainless steel
• Socket Size: 1/2"
• Thread: 1/2” NPT-M
• Max Temp: 175°
• Max Operating Pressure: 5,000 PSI
• Replaces QCS3MSS
• Weight: 0.30 lb

General Pump D10090 Quick Disconnect Coupler Socket Stainless Steel 1/2” x 1/2" NPT-F 5,000 PSI

Features:
• Quick disconnect design
• 304 Stainless steel
• EPDM O-Ring

Specifications:
• Quick Disconnect Coupler: Socket
• Body Material: 304 Stainless steel
• Socket Size: 1/2"
• Thread: 1/2” NPT-F
• Max Temp: 175°
• Max Operating Pressure: 5,000 PSI
• Replaces QCS3FSS
• Weight: 0.35 lb

General Pump 100970 5,000 PSI Stainless Steel Easy Start Valve 3/8” NPT-M Inlet & 1/4" Hosebarb. Eases system start-up. Especially useful for engine-driven pressure washers

Features:
• Fits any brand pump
• All Stainless Steel Construction
• Designed and made in the USA
• Long-life construction
• Improved seal design limits leaks
• Not re-buildable

Specifications:
• Maximum working pressure: 5,000 PSI
• Flow: 8 GPM
• Maximum Temperature: 195° F
• Inlet: 3/8" NPT-M
• Outlet: 1/4” Hose Barb
• Weight: 0.25 lbs

General Pump #2.1mm Fixed Chemical Injector, High Draw, Chemical Draw 20% with 3/8" NPT-M. This 20% fixed flow chemical injector is connected to the downstream side of the pressure pump and is activated when using a low pressure soap nozzle. Choose size based on flow rate of your pressure washer

Features
• 20% injection draw rate
• Made in the USA
• A cost effective solution to your chemical application needs

Injector Specifications:
• Size: # 2.1 mm (3.0 to 5.0 GPM)
• Max Operating Pressure: 4,500 PSI
• Max Temperature: 195° F
• Inlet: 3/8” NPT-M
• Outlet: 3/8” NPT-M
• Chemical Port: 1/4” Hose Barb
• Materials: Brass, Stainless Steel, Viton
• Note: If between sizes, choose the smaller injector size
• Weight: 0.30 lbs

General Pump 5,500 PSI High Pressure Inline Filter, 1/4” QD Plug x 1/4” NPT-M. Extend the life of your rotating or variable nozzle with an inlet filter

Features:
• 100 Mesh Screen
• 303 SS w/Brass Outlet

Specifications:
• Max. Pressure: 5,500 PSI
• Max. Volume: 8.0 GPM
• Screen: 100 Mesh
• Maximum Temperature: 200° F
• Inlet: 1/4" QD Plug
• Outlet: 1/4" NPT-M
• Materials: Brass, Stainless Steel, Buna-N
• Weight: 0.25 lbs.

General Pump DSN14F Steam Nozzle Blank 1/4" NPT-F, Drill to Size

Features:
• Strong brass construction
• Drill to size
• Multi-step expansion chamber
• BEFORE USE, DRILL ORIFICE TO RECOMMENDED NOZZLE SIZE!
• DO NOT TOUCH OR REMOVE WHEN HOT!

Specifications:
• Maximum Operating Pressure: 1,450 PSI
• Inlet Port: 1/4” NPT-F
• Material: Brass
• Dimensions 0.75” Hex x 2.6” Long
• Cross Reference: 373702. 7102217, 87109570
• Weighs 0.20 lbs

General Pump DF07550 Clear Bowl Inlet Filter / Strainer 3/4" NPT-F 50 Mesh

Features
• Keeps debris out of pump
• Clear plastic bowl makes it easy to see when cleaning is required
• 50 mesh, stainless steel mesh screen
• Easy to install
• Easy to disassemble and assemble for cleaning
• Made with durable long lasting materials

Specifications
• Bowl: Polycarbonate
• Body: Nylon
• Screen: Stainless steel
• O-Ring: EPDM
• Maximum Pressure at 125° F: 100 PSI
• Maximum Pressure at 70° F: 150 PSI
• Inlet: 3/4” NPT-F
• Outlet: 3/4” NPT-F
• Weight: 0.50 Lbs

General Pump DF07580 Clear Bowl Inlet Filter / Strainer 3/4" NPT-F 80 Mesh

Features
• Keeps debris out of pump
• Clear plastic bowl makes it easy to see when cleaning is required
• 80 mesh, stainless steel mesh screen
• Easy to install
• Easy to disassemble and assemble for cleaning
• Made with durable long lasting materials

Specifications
• Bowl: Polycarbonate
• Body: Nylon
• Screen: Stainless steel
• O-Ring: EPDM
• Maximum Pressure at 125° F: 100 PSI
• Maximum Pressure at 70° F: 150 PSI
• Inlet: 3/4” NPT-F
• Outlet: 3/4” NPT-F
• Weight: 0.50 Lbs

General Pump #2.3mm Fixed Chemical Injector, High Draw, Chemical Draw 20% with 3/8" NPT-M. This 20% fixed flow chemical injector is connected to the downstream side of the pressure pump and is activated when using a low pressure soap nozzle. Choose size based on flow rate of your pressure washer

Features
• 20% injection draw rate
• Made in the USA
• A cost effective solution to your chemical application needs

Injector Specifications:
• Size: # 2.3 mm (5.0 to 8.0 GPM)
• Max Operating Pressure: 4,500 PSI
• Max Temperature: 195° F
• Inlet: 3/8” NPT-M
• Outlet: 3/8” NPT-M
• Chemical Port: 1/4” Hose Barb
• Materials: Brass, Stainless Steel, Viton
• Note: If between sizes, choose the smaller injector size
• Weight: 0.30 lbs

General Pump #1.8mm Fixed Chemical Injector, High Draw, Chemical Draw 20% with 3/8" NPT-M. This 20% fixed flow chemical injector is connected to the downstream side of the pressure pump and is activated when using a low pressure soap nozzle. Choose size based on flow rate of your pressure washer

Features
• 20% injection draw rate
• Made in the USA
• A cost effective solution to your chemical application needs

Injector Specifications:
• Size: # 1.8 mm (2.0 to 3.0 GPM)
• Max Operating Pressure: 4,500 PSI
• Max Temperature: 195° F
• Inlet: 3/8” NPT-M
• Outlet: 3/8” NPT-M
• Chemical Port: 1/4” Hose Barb
• Materials: Brass, Stainless Steel, Viton
• Note: If between sizes, choose the smaller injector size
• Weight: 0.30 lbs

1/4” SJNR General Pump # 4.5 Rotating Sewer Jet Nozzle 5,000 PSI.

Features
• Side ports impact the sides of the pipe
• Polishes and maximizes line recovery
• Rear facing nozzles advance hose through pipe
• Heat-treated Stainless Steel nozzles are wear and corrosion resistant
• Great for pipe, sewer and drain cleaning
• Compact design allows for maneuverability and cornering within pipes
• High pressure nozzles are sized to match the flow and pressure specifications of the equipment
• Works best on 2" to 4" Pipes

Specifications
• Nozzle Size: # 4.5
• Material: Stainless steel & Brass
• Maximum Pressure: 5,000 PSI
• Inlet: 1/4” NPT-F
• Outside Diameter (O.D.): .67”
• Length: 1.34”
• Weight: 1.4 oz

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

1/4” SJNR General Pump # 3.0 Rotating Sewer Jet Nozzle 5,000 PSI.

Features
• Side ports impact the sides of the pipe
• Polishes and maximizes line recovery
• Rear facing nozzles advance hose through pipe
• Heat-treated Stainless Steel nozzles are wear and corrosion resistant
• Great for pipe, sewer and drain cleaning
• Compact design allows for maneuverability and cornering within pipes
• High pressure nozzles are sized to match the flow and pressure specifications of the equipment
• Works best on 2" to 4" Pipes

Specifications
• Nozzle Size: # 3.0
• Material: Stainless steel & Brass
• Maximum Pressure: 5,000 PSI
• Inlet: 1/4” NPT-F
• Outside Diameter (O.D.): .67”
• Length: 1.34”
• Weight: 1.4 oz

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

1/4” SJNR General Pump # 3.5 Rotating Sewer Jet Nozzle 5,000 PSI.

Features
• Side ports impact the sides of the pipe
• Polishes and maximizes line recovery
• Rear facing nozzles advance hose through pipe
• Heat-treated Stainless Steel nozzles are wear and corrosion resistant
• Great for pipe, sewer and drain cleaning
• Compact design allows for maneuverability and cornering within pipes
• High pressure nozzles are sized to match the flow and pressure specifications of the equipment
• Works best on 2" to 4" Pipes

Specifications
• Nozzle Size: # 3.5
• Material: Stainless steel & Brass
• Maximum Pressure: 5,000 PSI
• Inlet: 1/4” NPT-F
• Outside Diameter (O.D.): .67”
• Length: 1.34”
• Weight: 1.4 oz

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

1/4” SJNR General Pump # 4.0 Rotating Sewer Jet Nozzle 5,000 PSI.

Features
• Side ports impact the sides of the pipe
• Polishes and maximizes line recovery
• Rear facing nozzles advance hose through pipe
• Heat-treated Stainless Steel nozzles are wear and corrosion resistant
• Great for pipe, sewer and drain cleaning
• Compact design allows for maneuverability and cornering within pipes
• High pressure nozzles are sized to match the flow and pressure specifications of the equipment
• Works best on 2" to 4" Pipes

Specifications
• Nozzle Size: # 4.0
• Material: Stainless steel & Brass
• Maximum Pressure: 5,000 PSI
• Inlet: 1/4” NPT-F
• Outside Diameter (O.D.): .67”
• Length: 1.34”
• Weight: 1.4 oz

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart