General Pump

General Pump 2100463 Hose Guide Kit For DHRA50300

FEATURES
• Protects hose when pulled out or at an angle
• Durable powder coated steel construction
• Corrosion resistant stainless steel hardware
• 4-way enclosed pinch-proof stainless steel guides
• Use in tight locations where sharp edges may damage hos
• Durable powder coated

Instruction Manual

SPECIFICATIONS
• Works with DHRA50300 A Frame Hose Reels
• Color: Gray
• Hose Reel Not Included
• Weight 7.85 lbs

General Pump 2100503 Hose Guide Kit For DHRA50450

FEATURES
• Protects hose when pulled out or at an angle
• Durable powder coated steel construction
• Corrosion resistant stainless steel hardware
• 4-way enclosed pinch-proof stainless steel guides
• Use in tight locations where sharp edges may damage hos
• Durable powder coated

Instruction Manual

SPECIFICATIONS
• Works with DHRA50450 A Frame Hose Reels
• Color: Gray
• Hose Reel Not Included
• Weight 8.95 lbs

General Pump 2702000 Hose For Hammerhead Surface Cleaners DCFSCP20, DCFSCP20GZ, DCFSCS22Z & DCFSCP24GZ

General Pump 2100462 Hose Guide Kit For DHRA50150

FEATURES
• Protects hose when pulled out or at an angle
• Durable powder coated steel construction
• Corrosion resistant stainless steel hardware
• 4-way enclosed pinch-proof stainless steel guides
• Use in tight locations where sharp edges may damage hos
• Durable powder coated

Instruction Manual

SPECIFICATIONS
• Works with DHRA50150 A Frame Hose Reels
• Color: Gray
• Hose Reel Not Included
• Weight 7.15 lbs

General ZK1 Flow Unloader 3,600PSI, 3/8" BSP-F Inlet & 1/2" BSP-M

• Max. Pressure: 3,600 PSI
• Max. Volume: 2.3 - 10.8 GPM
• Adjustable pressure
• Brass body
• Max. Fluid Temp.: 165°
• Inlet: 3/8" BSP-F
• Outlet: 1/2" BSP-M
• Bypass: 1/2" BSP-M
• Gauge Port: 1/4" BSP-F
• Weight: 2.3 lbs.

4,200 PSI 4.0 GPM General EP1313G8U/IF Direct Drive Pump with built-in unloader and injector

Features:
• Features built-in unloader (U) or unloader and fixed injector (UIF)
• New Forged brass manifold, increases working pressure to 4,200 PSI
• New plunger guide bushing (patent pending)
• Solid ceramic plungers with dual guide system
• New dual diameter plunger guide
• New optimized outlet valves
• New dual lip oil seal
• 1” Hollow shaft, flanged for direct couple to gas engines (SAE J609B)

Data Sheet

Specifications:
• General EP1313G8UIF Pump with SAE J609 Gas Flange
• Max. Volume: 4.0 GPM
• Max. Discharge Pressure: 4,200 PSI
• Max. Pump Speed: 3,400 RPM
• Shaft Diameter: 1” Hollow
• Max. Horsepower Requirements: 14.5 GHP
• Max. Fluid Temp.: 165º F
• Oil Capacity: 15 oz.
• Inlet Port Thread: 1/2"-14 BSP-F
• Discharge Port Thread: 3/8"-19 BSP-M
• Dimensions: 11.2"x9.6"x7.6"
• Replaces TX1510G8UIA
• Weight: 15.9 lb

General HF25A 4,050 PSI 19.6 GPM Triplex Plunger Pump. A “New Generation” Pump

Features:
• A “New Generation” Pump
• Triplex Plunger Pump, available in 4 flows
• Patent-pending, symmetrical power end design featuring top and bottom mounting holes allowing for easy left to right shaft conversion
• Low-high pressure packing design with integrated cooling system
• • High volumetric efficiency suction/delivery valves featuring new spherical design of sealing areas
• Splash lubrication
• SAE-C hydraulic drive bell housing and flexible couplers available
• Available with external gear box (direct drive only)
• Optional pulsing capability using F10744201 lifting valve (not included)

Specifications Sheet

Materials:
• High resistance light alloy die cast crankcase
• 420 Stainless steel manifold, nickel treated
• Taper roller bearings
• Special anti-friction, forged, light alloy connecting rods
• Forged alloy steel crankshaft, hardened, tempered and nitrited
• Cast iron piston guide, nickel treated
• Solid ceramic plungers
• Stainless steel valves

Specifications:
• Maximum Inlet Pressure:. 45 PSI
• Maximum Fluid Temperature:. *140° F
• Inlet Port Thread:. 1” NPT-F
• Discharge Port Thread:. 3/4” NPT-F
• Shaft Diameter:. 1.575”/40 mm
• Stroke:. 1.969”/50 mm
• Pump Dimensions: . 20” x 14.5” x 9.4”
• Crankcase Oil Capacity:. 128.5 oz. (3.8 liters, use GP Series 220 Oil
• Ship via truck
• Weight: 132 lbs./60 kg

General Pump D10040 M22-14MM M x M22-14MM M Twist Coupler Plug 4,000 PSI

Specifications:
• Inlet: Male M22, Yoke/Stem: 14MM
• Outlet: Male M22, Yoke/Stem: 14MM
• Material: Brass
• Max Operating Pressure: 4,000 PSI
• Weight: 0.10 lb

GP 2103245 Lock Pin Repair Kit for DHRA Hose Reels

Kit Includes:
• 2540085 Bracket, Lock x 1
• 2540086 Pin, Lock x 1
• 2720025 Spring, Lock Pin x 1
• 2200013 Washer, M8, SS x 1
• 2202033 Pin, Cotter, 2x20 x 1

GP 2103139 Brake Repair Kit for DHRA Hose Reels

Kit Includes:
• 2660268 Brake x 1
• 2200103 Bolt, M8 x 1
• 2660405 Knob, Brake x 1
• 2200013 Washer, M8, SS x 1

GP Hose Reel Swivel 5,000 PSI Forged Brass DHR (New Style)

Compatible with DHR50100, DHR50150 & DHRHC50100 hose reels

GP Hose Reel Swivel 5,000 PSI Forged Brass DHR (Old Style)

Compatible with DHR50100D, DHR50150D, DHR50100K and 2100357 hose reels with whip hose

Replaces GP # 2103051

General Pump PTP™ Series Pressure Washer Thermal Relief Valve with 3/8" Male Inlet. Protects the pump from damaging heat build-up while it is in bypass mode. The thermal relief valve, sensing a rise in temperature, opens and discharges a small amount of heated fluid. This allows cooler water to enter the system and cool the pump. When the gun is discharged the cooler water will cause the valve to close immediately.

Specifications:
• Compact Design - Shorter overall length
• Trip Temperature: 190º F.
• Brass body
• Inlet thread size: 3/8" MPT
• 1/4” Brass hose barb
• Mounts easily in the pump manifold,inlet water supply or bypass loop plumbing
• Weight: 1.5 oz

General Pump 15° x #40 Brass M-Style Spray Nozzle 1/4” NPT-M

Features
• 3,000 PSI max operating pressure
• Uniform one piece design
• Durable brass construction
• Laser engraved for clarity and durability

Specifications Sheet

Specifications
• Tip Angle: 15°
• Nozzle Size: 40
• Max Operating Pressure: 3,000 PSI
• Connection: 1/4” NPT-M
• Weight: 0.05 oz

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

General Pump 25° x #20 Brass M-Style Spray Nozzle 1/4” NPT-M

Features
• 3,000 PSI max operating pressure
• Uniform one piece design
• Durable brass construction
• Laser engraved for clarity and durability

Specifications Sheet

Specifications
• Tip Angle: 25°
• Nozzle Size: 20
• Max Operating Pressure: 3,000 PSI
• Connection: 1/4” NPT-M
• Weight: 0.05 oz

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

General Pump 25° x #60 Brass M-Style Spray Nozzle 1/4” NPT-M

Features
• 3,000 PSI max operating pressure
• Uniform one piece design
• Durable brass construction
• Laser engraved for clarity and durability

Specifications Sheet

Specifications
• Tip Angle: 25°
• Nozzle Size: 60
• Max Operating Pressure: 3,000 PSI
• Connection: 1/4” NPT-M
• Weight: 0.05 oz

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

General Pump 0° x #60 Brass M-Style Spray Nozzle 1/4” NPT-M

Features
• 3,000 PSI max operating pressure
• Uniform one piece design
• Durable brass construction
• Laser engraved for clarity and durability

Specifications Sheet

Specifications
• Tip Angle: 0°
• Nozzle Size: 60
• Max Operating Pressure: 3,000 PSI
• Connection: 1/4” NPT-M
• Weight: 0.05 oz

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

General Pump 0° x #40 Brass M-Style Spray Nozzle 1/4” NPT-M

Features
• 3,000 PSI max operating pressure
• Uniform one piece design
• Durable brass construction
• Laser engraved for clarity and durability

Specifications Sheet

Specifications
• Tip Angle: 0°
• Nozzle Size: 40
• Max Operating Pressure: 3,000 PSI
• Connection: 1/4” NPT-M
• Weight: 0.05 oz

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

General Pump 25° x #15 Brass M-Style Spray Nozzle 1/4” NPT-M

Features
• 3,000 PSI max operating pressure
• Uniform one piece design
• Durable brass construction
• Laser engraved for clarity and durability

Specifications Sheet

Specifications
• Tip Angle: 25°
• Nozzle Size: 15
• Max Operating Pressure: 3,000 PSI
• Connection: 1/4” NPT-M
• Weight: 0.05 oz

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

General Pump 15° x #20 Brass M-Style Spray Nozzle 1/4” NPT-M

Features
• 3,000 PSI max operating pressure
• Uniform one piece design
• Durable brass construction
• Laser engraved for clarity and durability

Specifications Sheet

Specifications
• Tip Angle: 15°
• Nozzle Size: 20
• Max Operating Pressure: 3,000 PSI
• Connection: 1/4” NPT-M
• Weight: 0.05 oz

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

General Pump 40° x #15 Brass M-Style Spray Nozzle 1/4” NPT-M

Features
• 3,000 PSI max operating pressure
• Uniform one piece design
• Durable brass construction
• Laser engraved for clarity and durability

Specifications Sheet

Specifications
• Tip Angle: 40°
• Nozzle Size: 15
• Max Operating Pressure: 3,000 PSI
• Connection: 1/4” NPT-M
• Weight: 0.05 oz

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

General Pump 40° x #60 Brass M-Style Spray Nozzle 1/4” NPT-M

Features
• 3,000 PSI max operating pressure
• Uniform one piece design
• Durable brass construction
• Laser engraved for clarity and durability

Specifications Sheet

Specifications
• Tip Angle: 40°
• Nozzle Size: 60
• Max Operating Pressure: 3,000 PSI
• Connection: 1/4” NPT-M
• Weight: 0.05 oz

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

General Pump 40° x #40 Brass M-Style Spray Nozzle 1/4” NPT-M

Features
• 3,000 PSI max operating pressure
• Uniform one piece design
• Durable brass construction
• Laser engraved for clarity and durability

Specifications Sheet

Specifications
• Tip Angle: 40°
• Nozzle Size: 40
• Max Operating Pressure: 3,000 PSI
• Connection: 1/4” NPT-M
• Weight: 0.05 oz

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

General Pump 40° x #20 Brass M-Style Spray Nozzle 1/4” NPT-M

Features
• 3,000 PSI max operating pressure
• Uniform one piece design
• Durable brass construction
• Laser engraved for clarity and durability

Specifications Sheet

Specifications
• Tip Angle: 40°
• Nozzle Size: 20
• Max Operating Pressure: 3,000 PSI
• Connection: 1/4” NPT-M
• Weight: 0.05 oz

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

General Pump 0° x #20 Brass M-Style Spray Nozzle 1/4” NPT-M

Features
• 3,000 PSI max operating pressure
• Uniform one piece design
• Durable brass construction
• Laser engraved for clarity and durability

Specifications Sheet

Specifications
• Tip Angle: 0°
• Nozzle Size: 20
• Max Operating Pressure: 3,000 PSI
• Connection: 1/4” NPT-M
• Weight: 0.05 oz

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

General Pump 15° x #15 Brass M-Style Spray Nozzle 1/4” NPT-M

Features
• 3,000 PSI max operating pressure
• Uniform one piece design
• Durable brass construction
• Laser engraved for clarity and durability

Specifications Sheet

Specifications
• Tip Angle: 15°
• Nozzle Size: 15
• Max Operating Pressure: 3,000 PSI
• Connection: 1/4” NPT-M
• Weight: 0.05 oz

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

General Pump 15° x #60 Brass M-Style Spray Nozzle 1/4” NPT-M

Features
• 3,000 PSI max operating pressure
• Uniform one piece design
• Durable brass construction
• Laser engraved for clarity and durability

Specifications Sheet

Specifications
• Tip Angle: 15°
• Nozzle Size: 60
• Max Operating Pressure: 3,000 PSI
• Connection: 1/4” NPT-M
• Weight: 0.05 oz

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

General Pump 25° x #40 Brass M-Style Spray Nozzle 1/4” NPT-M

Features
• 3,000 PSI max operating pressure
• Uniform one piece design
• Durable brass construction
• Laser engraved for clarity and durability

Specifications Sheet

Specifications
• Tip Angle: 25°
• Nozzle Size: 40
• Max Operating Pressure: 3,000 PSI
• Connection: 1/4” NPT-M
• Weight: 0.05 oz

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

General Pump 0° x #15 Brass M-Style Spray Nozzle 1/4” NPT-M

Features
• 3,000 PSI max operating pressure
• Uniform one piece design
• Durable brass construction
• Laser engraved for clarity and durability

Specifications Sheet

Specifications
• Tip Angle: 0°
• Nozzle Size: 15
• Max Operating Pressure: 3,000 PSI
• Connection: 1/4” NPT-M
• Weight: 0.05 oz

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

GP YVB75KDMN21 Direct Mount Unloader with 2.1 MM Injector Fits General Series Pumps: 44 (EZ Pumps), 47, 60 and 63 (TX Pumps)

• Maximum Pressure: 3,650 PSI
• Max. Volume: 7.8 GPM
• Adjustable pressure
• Chemical Injector: 2.1mm
• Forged brass body & hardware
• Built-In bypass channel
• Max. Fluid Temp.: 195 degrees F.
• Inlet Ports (1): 1/2" FPT
• Discharge Ports (1): 3/8” MPT
• Weight: 2.1 lbs

General YG4500STC / PA Linear Rear Entry Trigger Gun with Stainless inlet fitting & tube and ceramic ball.

Features:
• Shockproof plastic housing
• Ergonomic design, Minimizes fatigue for the operator
• Stainless Steel seat, inlet fitting & tube
• Ceramic bal
• Internal construction of brass and Stainless Steel

Specifications:
• Rated Pressure: 4,500 PSI
• Max Pressure: 5,000 PSI
• Max Flow: 10.5 GPM
• Max Temp: 320° F.
• Inlet: 3/8” NPT-F
• Outlet: 1/4” NPT-F
• Materials: Stainless Steel, Brass, Ceramic, Plastic, Buna-N, Teflon
• Dimensions: 8.4” x 5.4” x 1.2”
• Weight: 1.3 lbs

General EP1512S17 Triplex EP Series 1,750 RPM Solid Shaft Plunger Pump.

Features:
• Triplex plunger pump
• New Forged brass manifold
• New plunger guide bushing (patent pending)
• Solid ceramic plungers with dual guide system
• New dual diameter plunger guide
• New optimized outlet valves
• New dual lip oil seal

Specifications Sheet

WARNING: High Pressure Systems require a primary pressure regulating device (i.e. regulator, unloader) and a secondary pressure relief device (i.e. pop-off valve, relief valve). Failure to install such relief devices properly could result in personal injury or damage to pump or property. GP and PRI Industries do not assume any liability or responsibility for the operation of the user’s high pressure system.

Specifications:
• Solid Shaft for Belt or Gear Drive
• Max. Volume: 2.9 GPM
• Max. Discharge Pressure: 3,045 PSI
• Horsepower: 6.0 EBHP
• Max. Pump Speed: 1,750 RPM
• Maximum Inlet Pressure: 125 PSI
• Oil Capacity: 15 oz
• Max. Fluid Temp.: 165 degrees F.
• Inlet Port Thread: 1/2”-14 BSP-F
• Discharge Port Thread: 3/8”-19 BSP-F
• Shaft Diameter: .945 in./24 mm
• Dimensions – Nominal: 9.5” x 8.38” x 5.1”
• Note: Item for sale is PUMP ONLY as shown in picture and does not include unloader which is required for proper operation
• Weight: 15.4 lb.

General TSF2221 66 Series High Flow Triplex Plunger Pump

Features:
• Oversized roller bearings
• Fully anodized crankcase
• Innovative new seal design extends seal life
• New plunger design improves thermal shock resistance
• New valve cap improves hydrostatic performance

Specifications Sheet

WARNING: High Pressure Systems require a primary pressure regulating device (i.e. regulator, unloader) and a secondary pressure relief device (i.e. pop-off valve, relief valve). Failure to install such relief devices properly could result in personal injury or damage to pump or property. GP and PRI Industries do not assume any liability or responsibility for the operation of the user’s high pressure system.

Specifications:
• Triplex Plunger Pump
• Solid Shaft for Belt or Gear Drive
• Max. Discharge Pressure: 3,000 PSI
• Max. Volume: 8.5 GPM @ 1,450 RPM
• Max. Volume: 10.2 GPM @ 1,750 RPM
• Shaft Diameter: 24mm Solid
• Max. Horsepower Requirements (EBHP): 17.5 @ 8.5 GPM/21.0 @ 10.2 GPM
• Maximum Inlet Pressure: 125 PSI
• Oil Capacity: 33.8oz.
• Max. Fluid Temp.: 165° F.
• Inlet Ports (2): 3/4"-14 BSP-F
• Discharge Ports (2): 3/8-19 BSP-F
• Drive Side: Standard right
• Dimensions: 14.94" x 9.78" x 6.99"
• Note: Item for sale is PUMP ONLY as shown in picture and does not include unloader which is required for proper operation
• Weight: 40.7 lb.

General EP1813S17 Triplex EP Series 1,750 RPM Solid Shaft Plunger Pump.

Features:
• Triplex plunger pump
• New Forged brass manifold
• New plunger guide bushing (patent pending)
• Solid ceramic plungers with dual guide system
• New dual diameter plunger guide
• New optimized outlet valves
• New dual lip oil seal

Specifications Sheet

WARNING: High Pressure Systems require a primary pressure regulating device (i.e. regulator, unloader) and a secondary pressure relief device (i.e. pop-off valve, relief valve). Failure to install such relief devices properly could result in personal injury or damage to pump or property. GP and PRI Industries do not assume any liability or responsibility for the operation of the user’s high pressure system.

Specifications:
• Solid Shaft for Belt or Gear Drive
• Max. Volume: 4.2 GPM
• Max. Discharge Pressure: 2,900 PSI
• Horsepower: 8.3 HP
• Max. Pump Speed: 1,750 RPM
• Maximum Inlet Pressure: 125 PSI
• Oil Capacity: 15 oz
• Max. Fluid Temp.: 165 degrees F.
• Inlet Port Thread: 1/2”-14 BSP-F
• Discharge Port Thread: 3/8”-19 BSP-F
• Shaft Diameter: .945 in./24 mm
• Dimensions – Nominal: 9.5” x 8.38” x 5.1”
• Replaces TX1813S17
• Note: Item for sale is PUMP ONLY as shown in picture and does not include unloader which is required for proper operation
• Weight: 15.4 lb.

General EP1513S17 Triplex EP Series 1,750 RPM Solid Shaft Plunger Pump.

Features:
• Triplex plunger pump
• New Forged brass manifold
• New plunger guide bushing (patent pending)
• Solid ceramic plungers with dual guide system
• New dual diameter plunger guide
• New optimized outlet valves
• New dual lip oil seal

Specifications Sheet

WARNING: High Pressure Systems require a primary pressure regulating device (i.e. regulator, unloader) and a secondary pressure relief device (i.e. pop-off valve, relief valve). Failure to install such relief devices properly could result in personal injury or damage to pump or property. GP and PRI Industries do not assume any liability or responsibility for the operation of the user’s high pressure system.

Specifications:
• Solid Shaft for Belt or Gear Drive
• Max. Volume: 3.2 GPM
• Max. Discharge Pressure: 3,045 PSI
• Horsepower: 6.5 EBHP
• Max. Pump Speed: 1,750 RPM
• Maximum Inlet Pressure: 125 PSI
• Oil Capacity: 15 oz
• Max. Fluid Temp.: 165 degrees F.
• Inlet Port Thread: 1/2”-14 BSP-F
• Discharge Port Thread: 3/8”-19 BSP-F
• Shaft Diameter: .945 in./24 mm
• Dimensions – Nominal: 9.5” x 8.38” x 5.1”
• Replaces TX1513S17
• Note: Item for sale is PUMP ONLY as shown in picture and does not include unloader which is required for proper operation
• Weight: 15.4 lb.

General PMRTSF2021 Pump Made Ready 66 Series High Flow Triplex Plunger Pump. Pump is ready to use right out of the box

Features:
• Oversized roller bearings
• Fully anodized crankcase
• Innovative new seal design extends seal life
• New plunger design improves thermal shock resistance
• New valve cap improves hydrostatic performance

Specifications Sheet

WARNING: High Pressure Systems require a primary pressure regulating device (i.e. regulator, unloader) and a secondary pressure relief device (i.e. pop-off valve, relief valve). Failure to install such relief devices properly could result in personal injury or damage to pump or property. GP and PRI Industries do not assume any liability or responsibility for the operation of the user’s high pressure system.

Specifications:
• Triplex Plunger Pump
• Solid Shaft for Belt or Gear Drive
• Max. Discharge Pressure: 3,600 PSI
• Max. Volume: 7.0 GPM @ 1,450 RPM
• Max. Volume: 8.5 GPM @ 1,750 RPM
• Shaft Diameter: 24mm Solid
• Max. Horsepower Requirements (EBHP): 17.3 @ 7.0 GPM/21.0 @ 8.5 GPM
• Maximum Inlet Pressure: 125 PSI
• Oil Capacity: 33.8oz.
• Max. Fluid Temp.: 165° F.
• Inlet Ports (2): 3/4"-14 BSP-F
• Discharge Ports (2): 3/8-19 BSP-F

COMPONENTS:
• General TSF2021 Triplex Plunger Pump
• ZH284K Unloader, 4060 PSI, 10 GPM
• High pressure safety relief valve
• Thermal relief valve
• 3/8” Hose Barb and Clamp Keeps Hose Secure and Sealed
• 3/4” Garden Hose Inlet Fitting with 1/4” Side Port
• 3/8” QC brass socket Installed and 3/8” QC Plug Included
• Mounting rails included
• Note: Pumps are not tested prior to shipping and unloader will need to be adjusted
• Weight: 46 lb

1,500 PSI 2.11 GPM General TT9061EBFUI Direct Couple to Electric Motors (NEMA 56C) with Built In Unloader and Downstrean injector

Features:
• Forged brass manifold with exclusive lifetime warranty
• Die-cast annodized aluminum, oil-bath crankcase
• Solid ceramic plungers with continuously lubricated packings
• The original Interpump unitized, stainless steel, K01 inlet and outlet valves
• Ideal for all general cleaning, RO and misting applications
• Comes standard with NEMA 56C electric motor mounting flange
• Also available in “L” left-handed versions

Specifications Sheet

Specifications:
• Maximum Volume: 2.11 GPM
• Maximum Discharge Pressure: 1,500 PSI
• Maximum Pump Speed: 3,400 RPM
• Maximum Inlet Pressure: 125 PSI
• Oil Capacity: 11.2 oz.
• Maximum Fluid Temperature: 165°F
• Inlet Port Thread: 3/8-19 BSPP-F
• Discharge Port Thread: 1/4-19 BSPP-F
• Shaft Diameter 5/8 in. / 16 mm
• Horespower: 2.2 EBHP
• Weight 12.0 lbs.

General ET1504E34UTSL 2,610 PSI 2.0 GPM (Left Handed) Direct Drive Pump with Total Start-Stop flanged to direct couple on electric NEMA 56 C motors

Features:
• Total start-stop feature allows flow to activate electric motor
• Built-in unloader
• Nickel-plated cast manifold manufactured like heavy-duty pump line
• New generation seal package
• New dust protection chamber
• Solid ceramic plungers
• New oversized plunger guide
• New optimized inlet and outlet valves
• New oil seal
• Left side shaft, right side manifold

ET Series Spec Sheet

Specifications:
• Max. Volume: 2.0 GPM
• Max. Discharge Pressure: 2,610 PSI
• Max. Horsepower Requirements: 3.6 EBHP
• Max. Pump Speed: 3,400 RPM
• Max. Fluid Temp.: 165º F
• Oil Capacity: 8.5 oz
• Inlet Port Thread: 1/2"-10 BSP-F
• Discharge Port Thread: 3/8"-13 BSP-F
• Shaft Diameter: 5/8” Hollow
• Dimensions – Nominal: 8" x 7.4" x 4.7"
• Weight: 11.0 lb

General ET1506E34UTSL 2,610 PSI 2.9 GPM (Left Handed) Direct Drive Pump with Total Start-Stop flanged to direct couple on electric NEMA 56 C motors

Features:
• Total start-stop feature allows flow to activate electric motor
• Built-in unloader
• Nickel-plated cast manifold manufactured like heavy-duty pump line
• New generation seal package
• New dust protection chamber
• Solid ceramic plungers
• New oversized plunger guide
• New optimized inlet and outlet valves
• New oil seal
• Left side shaft, right side manifold

ET Series Spec Sheet

Specifications:
• Max. Volume: 2.9 GPM
• Max. Discharge Pressure: 2,610 PSI
• Max. Horsepower Requirements: 5.2 EBHP
• Max. Pump Speed: 3,400 RPM
• Max. Fluid Temp.: 165º F
• Oil Capacity: 8.5 oz
• Inlet Port Thread: 1/2"-10 BSP-F
• Discharge Port Thread: 3/8"-13 BSP-F
• Shaft Diameter: 5/8” Hollow
• Dimensions – Nominal: 8" x 7.4" x 4.7"
• Weight: 11.0 lb

General ET1505E34UTSL 2,610 PSI 2.1 GPM (Left Handed) Direct Drive Pump with Total Start-Stop flanged to direct couple on electric NEMA 56 C motors

Features:
• Total start-stop feature allows flow to activate electric motor
• Built-in unloader
• Nickel-plated cast manifold manufactured like heavy-duty pump line
• New generation seal package
• New dust protection chamber
• Solid ceramic plungers
• New oversized plunger guide
• New optimized inlet and outlet valves
• New oil seal
• Left side shaft, right side manifold

Specifications:
• Max. Volume: 2.1 GPM
• Max. Discharge Pressure: 2,610 PSI
• Max. Horsepower Requirements: 3.8 EBHP
• Max. Pump Speed: 3,400 RPM
• Max. Fluid Temp.: 165º F
• Oil Capacity: 8.5 oz
• Inlet Port Thread: 1/2"-10 BSP-F
• Discharge Port Thread: 3/8"-13 BSP-F
• Shaft Diameter: 5/8” Hollow
• Dimensions – Nominal: 8" x 7.4" x 4.7"
• Weight: 11.0 lb