General Pump

PA FL7 / General Pump YFL7SWITCH 5,650 PSI Mount In Any Position Flow Switch

Features
• Can be installed horizontally or vertically
• Magnetic drive obtained by the plunging piston movement
• Electrical insulation: class IP55
• Magnetic probe casing made of antiflame material

FL7 Data Sheet

Specifications
• Rated Pressure: 5,100 PSI
• Permissible Pressure: 5,650 PSI
• Max Flow Rate: 8 GPM
• Activation Flow Rate: Horizontal: 1.6 GPM
• Activation Flow Rate: Vertical: 2.4 GPM
• Max Working Temp: 165° F
• Max. Voltage: 230 V
• Max. Curr. Strength: 3 A
• Cable Length: 49.2" (1250 mm)
• Electric Cable: 2x0,5 mmq. - 0
• Electrical insulation: 55 IP - 0
• Inlet: 3/8 Bsp F
• Outlet: 3/8 Bsp F
• Weight: 15.38 oz.

PA FL3 / General Pump YFLOSWITCH 4,050 PSI Mount In Any Position Flow Switch

Features
• Can be installed horizontally or vertically
• Reed switch with high resistance
• Reduced dimensions both axial and lateral
• Magnetic drive obtained by the plunging piston movement
• Electrical insulation: class IP55
• Magnet covered by plastic casing to minimize the braking effect of metal particles and scale

FL3 Data Sheet

Specifications
• Rated Pressure: 3,650 PSI
• Permissible Pressure: 4,050 PSI
• Rated Flow Rate: 8 GPM
• Activation Flow Rate: Horizontal: 0.8 GPM
• Activation Flow Rate: Vertical: 0.8 GPM
• Max Working Temp: 165° F
• Max. Voltage: 230 V
• Max. Curr. Strength: 3 A
• Cable Length: 49.2" (1250 mm)
• Electric Cable: 2x0,5 mmq. - 0
• Electrical insulation: 55 IP - 0
• Inlet: 3/8 Bsp F
• Outlet: 3/8 Bsp F
• Weight: 10.58 oz.

General Pump 2660059 Brush Assembly for DCFSCP20 & DCFSCP20GZ
• Size: 20" x 20" x 2"
• Weight: lb

PA TR1 /GP YADJNOZ Adjustable Hi / Low Nozzle Holder. The adjustable nozzle holder TR1 can work with pressures up to 4,050 PSI and with flow rates up to 8 GPM

Features
• By turning the plastic protection it is possible to switch from high to low pressure
• This type of device is normally used with high-pressure cleaners that provide for the mixing of water with chemical product by means of a Venturi injector

Specifications
• Rated Pressure: 3,650 PSI
• Permissible Pressure: 4,050 PSI
• Rated Flow Rate: 8 GPM
• Rated Temperature: 300° F.
• Body Material: Brass
• Inlet: 1/4 Npt F
• Outlet: 1/4 Npt F
• Weight: 4.06 oz.
• Note: Requires one 1/4” MPT nozzle, which is not included

General Pump D10118 2 Way Steel Unloader Mounting Block, 3/8" NPT-F x 3/8" NPT-F, Bolt-down

Features:
• Mounting blocks provide flexibility to mount additional accessories to your system

Specifications Sheet

Specifications:
• Max Pressure: 5,500 PSI
• Material: Steel, with YZD Finish

General Pump D10119 3 Way Brass Unloader Manifold Block, 3/8" NPT-F, Bolt-down

Features:
• Mounting blocks provide flexibility to mount additional accessories to your system

Specifications Sheet

Specifications:
• Max Pressure: 4,000 PSI
• Material: Brass

General Pump D10127 2 Way Steel Unloader Mounting Block, 1/2" NPT-F x 1/2" NPT-F, Bolt-down

Features:
• Mounting blocks provide flexibility to mount additional accessories to your system

Specifications Sheet

Specifications:
• Max Pressure: 5,000 PSI
• Material: Steel, with YZD Finish

General Pump D10117 3 Way Brass Unloader Manifold Block, 1/2" NPT-F x 1/2" NPT-F x 3/8" NPT-F

Features:
• Mounting blocks provide flexibility to mount additional accessories to your system

Specifications Sheet

Specifications:
• Max Pressure: 4,000 PSI
• Material: Brass

3/8" Ball Valve Kit with GP Stainless Steel Quick Disconnect Couplers 5,000 PSI. Use ball valve to control the flow of water

Ball Valve Specifications
• Zinc plated steel bod
• Chrome plated steel ball
• Max Temperature: +212°F
• Max Pressure: 7,250 PSI

Kit Includes:
• 3/8" FPT Valley Industries Ball valve
• 3/8" General Pump D10079 stainless steel plug
• 3/8" General Pump D10075 stainless steel socket
• Max Pressure: 5, 000 PSI
• Weight 1.45 lbs.

12 Pack General Pump D10072 Quick Disconnect Coupler Sockets Stainless Steel 1/4” x 1/4" NPT-F 6,000 PSI

Features:
• Quick disconnect design
• 304 Stainless steel
• EPDM O-Ring

Package Contents:
• 12 QD Sockets

Specifications:
• Quick Disconnect Coupler: Socket
• Body Material: 304 Stainless steel
• Socket Size: 1/4"
• Thread: 1/4” NPT-F
• Max Temp: 175°
• Max Operating Pressure: 6,000 PSI
• Weight: 1.40 lb

12 Pack General Pump D10001 Quick Disconnect Coupler Sockets Brass 1/4” x 1/4" NPT-F 5,000 PSI

Features:
• Quick disconnect design
• Brass
• EPDM O-Ring

Package Contents:
• 12 QD Sockets

Specifications:
• Quick Disconnect Coupler: Socket
• Body Material: Brass
• Socket Size: 1/4"
• Thread: 1/4” NPT-F
• Max Temp: 175°
• Max Operating Pressure: 5,000 PSI
• Weight: 1.50 lb

General ET1506E34 2,610 PSI 2.9 GPM (Left Handed) Direct Drive Pump flanged to direct couple on electric NEMA 56 C motors

Features:
• “HR” anti-corrosion surface treatment on manifold
• New generation seal package
• Dust protection chamber
• Solid ceramic plungers
• Oversized plunger guide
• Optimized inlet and outlet valves
• Oversized crankcase Hollow shaft, flanged for direct couple to electric motors (NEMA56C)

Specifications:
• Max. Volume: 2.9 GPM
• Max. Discharge Pressure: 2,610 PSI
• Max. Horsepower Requirements: 5.2 EBHP
• Max. Pump Speed: 3,400 RPM
• Max. Fluid Temp.: 165º F
• Oil Capacity: 8.5 oz
• Inlet Port Thread: 1/2"-14 BSP-F
• Discharge Port Thread: 3/8"-19 BSP-F
• Shaft Diameter: 5/8” Hollow
• Dimensions – Nominal: 7.3" x 7.4" x 5.5"
• Weight: 11.0 lb

General ET1506E34 2,610 PSI 2.9 GPM Direct Drive Pump flanged to direct couple on electric NEMA 56 C motors

Features:
• “HR” anti-corrosion surface treatment on manifold
• New generation seal package
• Dust protection chamber
• Solid ceramic plungers
• Oversized plunger guide
• Optimized inlet and outlet valves
• Oversized crankcase Hollow shaft, flanged for direct couple to electric motors (NEMA56C)

Specifications:
• Max. Volume: 2.9 GPM
• Max. Discharge Pressure: 2,610 PSI
• Max. Horsepower Requirements: 5.2 EBHP
• Max. Pump Speed: 3,400 RPM
• Max. Fluid Temp.: 165º F
• Oil Capacity: 8.5 oz
• Inlet Port Thread: 1/2"-14 BSP-F
• Discharge Port Thread: 3/8"-19 BSP-F
• Shaft Diameter: 5/8” Hollow
• Dimensions – Nominal: 7.3" x 7.4" x 5.5"
• Weight: 11.0 lb

General TSS1021 Triplex Plunger Pump. The preferred pump frame in the pressure cleaning industry

Features:
• Forged brass manifold with an exclusive lifetime warranty
• Large-capacity, die-cast, anodized aluminum oil-bath crankcase
• Over-sized connecting rods for maximum life
• Solid ceramic plungers with continuously lubricated packings
• Unitized stainless steel inlet and discharge valves
• Designed for suction applications
• Manifold with fine thread valve caps

Specifications Sheet

Specifications:
• Triplex Plunger Pump
• Solid Shaft for Belt or Gear Drive
• Max. Volume: 4.5 / 5.6 GPM
• Max. Discharge Pressure: 3,500 / 1,700 PSI
• Max. Pump Speed: 1,125 / 1,450 RPM
• Shaft Diameter: 24mm Solid
• Max. Horsepower Requirements: 13.0 GHP
• Max. Fluid Temp.: 165 degrees F.
• Inlet Ports (2): 1/2" BSP
• Discharge Ports (2): 3/8" BSP
• Drive Side: Standard right
• Forged brass head & valve covers
• Solid ceramic plungers
• Replaces PG564
• Note: Item for sale is PUMP ONLY as shown in picture and does not include unloader which is required for proper operation
• Weight: 32.0 lb.

12 Pack General Pump D10078 Quick Disconnect Coupler Plug Stainless Steel 3/8” x 3/8" NPT-F 6,000 PSI

Features:
• Quick disconnect design
• 304 Stainless steel

Package Contents:
• 12 QD Plugs

Specifications:
• Quick Disconnect Coupler: Plug
• Body Material: 304 Stainless steel
• Plug Size: 3/8"
• Thread: 3/8” NPT-F
• Max Temp: 175°
• Max Operating Pressure: 6,000 PSI
• Weight: 1.08 lb

12 Pack General Pump D10074 Quick Disconnect Coupler Sockets Stainless Steel 3/8” x 3/8" NPT-F 5,000 PSI

Features:
• Quick disconnect design
• 304 Stainless steel
• EPDM O-Ring

Package Contents:
• 12 QD Sockets

Specifications:
• Quick Disconnect Coupler: Socket
• Body Material: 304 Stainless steel
• Socket Size: 3/8"
• Thread: 3/8” NPT-F
• Max Temp: 175°
• Max Operating Pressure: 5,000 PSI
• Weight: 2.52 lb

12 Pack General Pump D11008 Quick Disconnect Coupler Plugs Hardened Steel Zinc Plated 3/8” x 3/8" NPT-F 4,000 PSI

Features:
• Quick disconnect design
• Hardened Steel Zinc Plated

Package Contents:
• 12 QD Plugs

Specifications:
• Quick Disconnect Coupler: Plug
• Body Material: Hardened Steel
• Plug Size: 3/8"
• Thread: 3/8” NPT-F
• Max Temp: 175°
• Max Operating Pressure: 4,000 PSI
• Weight: 1.2 lb

12 Pack General Pump D10003 Quick Disconnect Coupler Sockets Brass 3/8” x 3/8" NPT-F 4,000 PSI

Features:
• Quick disconnect design
• Brass
• EPDM O-Ring

Package Contents:
• 12 QD Sockets

Specifications:
• Quick Disconnect Coupler: Socket
• Body Material: Brass
• Socket Size: 3/8"
• Thread: 3/8” NPT-F
• Max Temp: 175°
• Max Operating Pressure: 4,000 PSI
• Weight: 2.52 lb

10 Pack General Pump 3/8" 4,000 PSI Quick Disconnect Coupler Fittings (5 Steel Plugs & 5 Brass Sockets)

Features:
• Quick disconnect design
• Body Material: Brass and steel

Package Contents:
• 5 pc: General Pump 3/8” NPT-F Brass quick coupler socket
• 5 pc: General Pump 3/8” NPT-F Zinc Plated Hardened Steel quick disconnect coupler plug

Specifications:
• Max Temp: 175°
• Max Operating Pressure: 4,000 PSI
• Works with standard quick connects
• Weight: 1.55 lb

10 Pack General Pump 3/8" 5,000 PSI Stainless Steel Quick Disconnect Fittings (5 Plugs & 5 Sockets)

Features:
• Quick disconnect design
• Body Material: 304 Stainless steel

Package Contents:
• 5 pc: General Pump 3/8 NPT-F Quick disconnect coupler socket with EPDM O-ring
• 5 pc: General Pump 3/8 NPT-F Quick disconnect coupler plug

Specifications:
• Max Temp: 175°
• Max Operating Pressure: 5,000 PSI
• Works with standard quick connects
• Weight: 1.50 lb

General Pump 2103410 Electric Hose Reel Motor Kit. Fits DHRA Hose Reels

FEATURES
• Allows for effortless rewinding of hose
• Free spin allows for easy pulling out of hose
• Durable powder coated finish
• Stainless steel hardware
• Long lasting hardened gears

SPECIFICATIONS
• Works with DHRA50150, DHRA50300 & DHRA50450 A Frame Hose Reels
• Voltage 12V DC
• Hose Reel Not Included
• Weight 21 lbs

General 47200274 Pump Rail / Foot 2-5/8", 47, 66 Series, Tall

GP TS38150 High Limit TS Series Thermal Switch 3/8" NPT 150º F with 68" Wire Lead

Features
• Simple installation
• 68” 18 AWG Cable
• Normally Closed
• Can be mounted in any position
• Factory calibrated
• Made in the USA
• Precision snap action internal switches

TS Series Snap Action Data Sheet

Specifications
• Maximum Pressure: 5,000 PSI
• Voltage: 5 AMPS at 120 VAC
• Cord Length: 68”
• Temperature: 150º F
• Inlet: 3/8” NPT
• Switch Dimensions: 2.5" x 1"
• Materials: Brass, Steel, Nylon, Epoxy
• Weight: 0.5 Lb

GP TS38230 High Limit TS Series Thermal Switch 3/8" NPT 230º F with 68" Wire Lead

Features
• Simple installation
• 68” 18 AWG Cable
• Normally Closed
• Can be mounted in any position
• Factory calibrated
• Made in the USA
• Precision snap action internal switches

TS Series Snap Action Data Sheet

Specifications
• Maximum Pressure: 5,000 PSI
• Voltage: 5 AMPS at 120 VAC
• Cord Length: 68”
• Temperature: 230º F
• Inlet: 3/8” NPT
• Switch Dimensions: 2.5" x 1"
• Materials: Brass, Steel, Nylon, Epoxy
• Weight: 0.5 Lb

GP TS38250 High Limit TS Series Thermal Switch 3/8" NPT 250º F with 68" Wire Lead

Features
• Simple installation
• 68” 18 AWG Cable
• Normally Closed
• Can be mounted in any position
• Factory calibrated
• Made in the USA
• Precision snap action internal switches

TS Series Snap Action Data Sheet

Specifications
• Maximum Pressure: 5,000 PSI
• Voltage: 5 AMPS at 120 VAC
• Cord Length: 68”
• Temperature: 250º F
• Inlet: 3/8” NPT
• Switch Dimensions: 2.5" x 1"
• Materials: Brass, Steel, Nylon, Epoxy
• Weight: 0.5 Lb

GP TS12190 High Limit TS Series Thermal Switch 1/2" NPT 190º F with 68" Wire Lead

Features
• Simple installation
• 68” 18 AWG Cable
• Normally Closed
• Can be mounted in any position
• Factory calibrated
• Made in the USA
• Precision snap action internal switches

TS Series Snap Action Data Sheet

Specifications
• Maximum Pressure: 5,000 PSI
• Voltage: 5 AMPS at 120 VAC
• Cord Length: 68”
• Temperature: 190º F
• Inlet: 1/2” NPT
• Switch Dimensions: 2.5" x 1"
• Materials: Brass, Steel, Nylon, Epoxy
• Weight: 0.5 Lb

GP TS12250 High Limit TS Series Thermal Switch 1/2" NPT 250º F with 68" Wire Lead

Features
• Simple installation
• 68” 18 AWG Cable
• Normally Closed
• Can be mounted in any position
• Factory calibrated
• Made in the USA
• Precision snap action internal switches

TS Series Snap Action Data Sheet

Specifications
• Maximum Pressure: 5,000 PSI
• Voltage: 5 AMPS at 120 VAC
• Cord Length: 68”
• Temperature: 250º F
• Inlet: 1/2” NPT
• Switch Dimensions: 2.5" x 1"
• Materials: Brass, Steel, Nylon, Epoxy
• Weight: 0.5 Lb

GP TS38190 High Limit TS Series Thermal Switch 3/8" NPT 190º F with 68" Wire Lead

Features
• Simple installation
• 68” 18 AWG Cable
• Normally Closed
• Can be mounted in any position
• Factory calibrated
• Made in the USA
• Precision snap action internal switches

TS Series Snap Action Data Sheet

Specifications
• Maximum Pressure: 5,000 PSI
• Voltage: 5 AMPS at 120 VAC
• Cord Length: 68”
• Temperature: 190º F
• Inlet: 3/8” NPT
• Switch Dimensions: 2.5" x 1"
• Materials: Brass, Steel, Nylon, Epoxy
• Weight: 0.5 Lb

PA FL 12 / General Pump YFL12 4,500 PSI 26.4 GPM Flow Switch with 3/4" NPT-F inlet

Features
• Electro-mechanical device in which the fluid passage moves a magnetized piston that opens an electric circuit. DN 20
• Magnetic drive obtained by the plunging piston movement
• Electrical insulation: class IP55
• Magnetic probe casing made of antiflame material

Specifications
• Rated Pressure: 4,000 PSI
• Permissible Pressure: 4,500 PSI
• Max Flow Rate: 26.4 GPM
• Activation Flow Rate: Horizontal: 2.0 GPM
• Activation Flow Rate: Vertical: 3.3 GPM
• Max Working Temp: 165° F
• Max. Voltage: 230 V
• Max. Curr. Strength: 3 A
• Cable Length: 49.2" (1250 mm)
• Electrical insulation: 55 IP - 0
• Materials: Brass, Stainless Steel, Buna-N, Plastic
• Inlet: 3/4" NPT-F
• Outlet: 3/4" NPT-F
• Weight: 34.4 oz.

General Pump YVB35KDME Direct-Mount, Control Set Unloader Used with ET, EP & ES Series Pumps

Featuring:
• Direct-mount, control set unloader
• Used with ET, EP and ES Series pumps
• Built-in bypass
• Sturdy steel and brass construction
• Adjustable locknut to control the maximum pressure
• Plastic adjustment knob (not pictured)

Specifications:
• Rated Pressure: 3,200 PSI
• Minimum Adjustable Pressure: 319 PSI
• Maximum Discharge Pressure: 3.650 PSI
• Rated Volume: 6.5 GPM
• Pressure Drop to Reset Bypass: 19%
• Max. Fluid Temp.: 195° F.
• Inlet Port: 1/2” BSP-F
• Outlet Port: 3/8” BSP-M
• Materials: Brass, Stainless Steel, Buna-N
• Overall Dimensions: 5.9” x 3.0” x 1.75”
• Weight: 1.8 lbs

General Pump ZGRS1000 Gear Reducer for 2.2 to 1, 1″ Shafted Engines, Up to 25 HP, J609A Flange, 47 and 66 Series pumps

Features:
• Eliminates need for belts and pulleys. Saves time and money
• Compact design for easier enclosure. Reduced size of mounting base
• Oversized bearing system is self-aligning. Reduces load on motor bearings and pump bearings
• Self-contained lubrication system Uses 90W gear lube for quiet, long life operation. Protects pump from failure due to gearbox oil loss. Protects gearbox from failure due to oil loss in pump
• Large, helical cut, hardened steel gears for quiet, long life operation
• Large capacity crankcase
• Reversible mounting for right or left hand drive gas engines. Includes reversible dipstick and oil level sight glass
• Model ZGRS1000 for a 1” keyed shaft

Specifications:
• Maximum BHP (Engine HP): 25
• Maximum Engine RPM: 3,600
• Reduction Ratio: 1:2.2
• Maximum Pump Speed: 1,450 RPM
• Oil Capacity (SP Industrial Pump Oil Series 220): 9.47 Oz
• Fits Engine Shaft Diameter: 1”
• Fits General Pump Models: 47 Series (1450 RPM Versions) 66 Series (1450 RPM Versions)
• Weight: 9.26 lb.

General Pump ZFWWU Flange For NEMA-C Electric Motors 56C Frame (TT/TP Series 51 Pumps)

Specifications:
• Material: Heavy-duty cast aluminum
• Pump Series: TT/TP 51 Series
• Motor Frame: NEMA-C Electric 56C
• Motor Rating: 3-1/2 to 8 HP
• Weight: lb.