Fairview USA Inc.

Fairview GAS-FLO™ CP-2736 3/8” OD x 36” Short Nose POL x Short Nose POL Copper Propane Gas Hogtail. Fairview's Short POL To Short POL Copper hogtails are ideal for use with Propane Gas

Applications:
• Propane gas copper pigtails and hogtails provide a flexible connection between the container valve and the regulator
• Solder connections Copper tube for HOGTAILS is 3/8" O.D. by .049 WALL
• Usage depends on application and requirements
• With soldered ends and a wide selection of connections and lengths

TECHNICAL DATA SHEET

INSTALLATION DATA SHEET

Specifications:
• Tube OD: 3/8”
• Approx. Length: 36”
• Tube Material: Copper
• End: Short Nose P.O.L
• End: Short Nose P.O.L
• TO BE INSTALLED BY LICENSED GAS FITTERS ONLY
• Weight: 0.85 lbs

Fairview GAS-FLO™ 2001-S Manifold Block Tee Assembly with O-Ring Female POL (2) x Male POL. Fairview's Female POL Tee is ideal for adding a second gas appliance to an LP-Gas system

Specifications:
• End (2): Female POL
• End: Male POL
• Material: Brass
• TO BE INSTALLED BY LICENSED GAS FITTERS ONLY
• Weight: 12.0 oz

Fairview QD-GMC8-8F GAS-FLO™ 1/2” Coupler x 1/2” FPT LPG/Nat. Gas Quick Disconnect. Fairview's CSA LPG/Nat. Gas Couplers are CSA Certified up to 60 PSI WP

Features:
• C.S.A. GAS INTERCHANGE QUICK DISCONNECTS (QD-GMC)
• CSA certified to Z21.41/CSA6.9 for Natural Gas and LP-Gas – air mixtures
• All QD-GMC Quick Disconnects Rated To 60 P.S.I.
• QD-GMC Sizes 1/4, 3/8, 1/2 & 3/4 Quick Disconnects Are Rated To A Temperature -40°F

TECHNICAL DATA SHEET

INSTALLATION INSTRUCTIONS

Specifications:
• Coupler (Body Size): 1/2
• Female Pipe Thread: 1/2
• Quick Disconnect BTU Capacity: 120,000
• Material: Brass
• Weight: 7.4 oz

Fairview GAS-FLO™ 1/4” ID x 96” AOL Type 1 Thermoplastic Propane Hose Assembly with RV QD Coupler x QD Nipple Fittings Fairview's Type 1 Thermoplastic RV Outside Appliance Quick Disconnect Hoses are CSA Certified to 350 PSI WP -40°F To 140°F

Applications:
• Used To Conduct Natural Gas In A Gaseous State And Propane In Either A Liquid Or Gaseous State Up To 350 P.S.I
• UL/CSA Approved Type 1 Propane/Nat Gas Assy (Type 1 Assy)

TECHNICAL DATA SHEET

INSTALLATION INSTRUCTIONS

Specifications:
• Hose ID: 1/4”
• Assembly Overall Length: 96” (Tolerance ±1% of length measured to the nearest 1/8 of an inch)
• Temperature: -40°F to +140°F
• Color: Black
• Max Pressure: 350 PSI
• End: 1/4” Brass RV QD Coupler
• End: 1/4” Brass RV QD Nipple
• TO BE INSTALLED BY LICENSED GAS FITTERS ONLY
• Weight: 0.95 lbs

Fairview PC1469SW-10D 5/8 Tube OD x 1/2 MPT Brass D.O.T. Push-To-Connect 90° Male Swivel Elbow Air Brake Fitting. Fairview's 90° Male Pipe Swivel Elbows Feature A Labor Saving Full Flow Design That Requires No Tools

Applications:
• Air brake systems. Used with copper tubing for rigid plumbing along frame and air tank
• Use with J844D Nylon Air Brake Tube
• D.O.T. RECOGNIZED FOR ALL AIR BRAKE APPLICATIONS EXCEPT THOSE FOR USE BETWEEN FRAME AND AXLE OR BETWEEN TOWED AND TOWING VEHICLES

TECHNICAL DATA SHEET

INSTALLATION DATA SHEET

Specifications:
• Fitting Type: Push-To-Connect
• Fitting Style: 90° Male Swivel Elbow
• Tube OD: 5/8"
• Pipe Thread: 1/2" MPT
• Material: Brass
• Working Temperature: -40°F (-40°C) to 225°F (107°C)
• Weight 0.31 lbs

Accutek® QD-BISOBC6-6F 3/8 Coupler x 3/8 Female Pipe ISO Series B 7241-1 Brass 3,500 PSI Quick Disconnect. Fairview's ISO B Interchange Couplers Interchange with Aeroquip FD45, Foster FHK, Parker 60, Safeway BS10 and Faster HNV Series

Features:
• High flow characteristics and pressure ratings superior to Parker 60 series
• Industry interchangeability with other manufacturer's ISO "B" couplers and nipples
• Poppet style double shut-off.
• Nitrile NBR seals with PTFE back-up ring
• Proven ball lock mechanism
• 4 : 1 safety factor (Min. Burst = WP. X 4)
• Ideal for use with hydraulic and other fluids in both stationary and mobile industrial applications

Specifications:
• Working Pressure: 3,500 PSI
• Body Size: 3/8
• Female Pipe: 3/8
• Body Material: Brass
• Approx. Weight: 0.48 lbs

Fairview Accutek® BVCS2403-B 1/4 FPT 3 Piece Steel High Pressure Full Port Ball Valve 7,250 WOG. Fairview's Carbon Steel 3-Piece Design / High Pressure ball valves are rated up to 7,250 WOG WP

Features:
• Carbon Steel valves for use in hydraulic applications
• 3 Piece design - High Pressure
• Temperature Range: -20°F to +425°F

TECHNICAL DATA SHEET

INSTALLATION DATA SHEET

Specifications:
• WOG: 7,250
• Female Pipe: 1/4 FPT
• Port Style: Full
• Body Material: Carbon steel
• Pipe threads must be sealed using approved thread sealant
• Weight: 0.85 lbs

Accutek® QD-ISOAC12-12F 3/4 Coupler x 3/4 Female Pipe ISO Series A 7241-1 Steel 4,000 PSI Quick Disconnect. Fairview's ISO A Interchange Couplers Interchange with Aeroquip 5600, Parker 6600, Safeway S56 and Faster ANV Series

Features:
• Industry interchangeability with other manufacturer's ISO "A" couplers and nipples
• High Strength Steel Construction
• Nitrile NBR seals with PTFE back-up ring
• Proven ball lock mechanism
• 4 : 1 safety factor (Min. Burst = WP. X 4)
• Hydraulic applications where connection and disconnection is required either for maintenance or operation
• For use on truck & trailer, snow plows, agricultural, dump, construction equipment

Specifications:
• Working Pressure: 4,000 PSI
• Body Size: 3/4
• Female Pipe: 3/4
• Body Material: Steel
• Temperature Range: -40F to 250F
• Approx. Weight: 1.10 lbs

Fairview GAS-FLO™ BV2103-J 1-1/4" FPT Forged Brass Ball Valve 600 WOG, 150 WSP. Fairview's Forged Brass Ball Valves are full port and CSA, CGA & UL certified

TECHNICAL DATA SHEET

INSTALLATION DATA SHEET

Features:
• Brass valves for use in W.O.G. = Water, Oil and Gas; W.S.P. = Working Steam Pressure applications
• Two piece Body
• Full Port
• Blowout-Proof Stem
• PTFE Seats
• CSA - ANSI Z21.15/CGA 9.1, ASME B16.44, CGA CR 91-00
• CAN/CGA 3.16, ASME B16.33 & ASME B16.38
• UL 842 (MHKZ): Manual valves-250 psi

Specifications:
• W.O.G: 600
• W.S.P: 150
• Pipe Size: 1-1/4” FPT
• Connection Type: Female to Female
• Materials: Brass C3700, Chrome & Nickel Plated Steel, PTFE
• Weight: 1.58 lbs

Fairview Accutek® BVCS2403-C 3/8 FPT 3 Piece Steel High Pressure Full Port Ball Valve 7,250 WOG. Fairview's Carbon Steel 3-Piece Design / High Pressure ball valves are rated up to 7,250 WOG WP

Features:
• Carbon Steel valves for use in hydraulic applications
• 3 Piece design - High Pressure
• Temperature Range: -20°F to +425°F

TECHNICAL DATA SHEET

INSTALLATION DATA SHEET

Specifications:
• WOG: 7,250
• Female Pipe: 3/8 FPT
• Port Style: Full
• Body Material: Carbon steel
• Pipe threads must be sealed using approved thread sealant
• Weight: 1.20 lbs

Fairview RV-TANK-KIT18BLK Dual Tank Mounting Kit for 20 lbs Vertical LP Gas Tanks. Fairview's Tank Pan Kit Components are designed to fit 20LB RV Propane Tanks

Specifications:
• (1) Threaded bar for 20 lb
• (1) Top hold down bar
• (1) Black double tank pan
• (1) Galvanized wingnut
• Weight: 7.35 lbs

Accutek® QD-ISOAC16-16F 1 Coupler x 1 Female Pipe ISO Series A 7241-1 Steel 3,000 PSI Quick Disconnect. Fairview's ISO A Interchange Couplers Interchange with Aeroquip 5600, Parker 6600, Safeway S56 and Faster ANV Series

Features:
• Industry interchangeability with other manufacturer's ISO "A" couplers and nipples
• High Strength Steel Construction
• Nitrile NBR seals with PTFE back-up ring
• Proven ball lock mechanism
• 4 : 1 safety factor (Min. Burst = WP. X 4)
• Hydraulic applications where connection and disconnection is required either for maintenance or operation
• For use on truck & trailer, snow plows, agricultural, dump, construction equipment

Specifications:
• Working Pressure: 3,000 PSI
• Body Size: 1
• Female Pipe: 1
• Body Material: Steel
• Temperature Range: -40F to 250F
• Approx. Weight: 1.65 lbs

Fairview SRT225-6C 3/8 ID x 3/8 Male Pipe Steel Reusable Hose End s for use with S.A.E. 100R2-AT (NON-SKIVE) hose

TECHNICAL DATA SHEET

INSTALLATION DATA SHEET

Specifications:
• Steel Reusable Hose Ends for use with S.A.E. 100R2-AT (NON-SKIVE) hose
• High pressure service in the handling of most hydraulic fluids, gasoline, diesel fuels, lubricating oils and water
• Working Temperature: -40°F to +250°F, -40°C to +121°C
• Working Pressure: Are hose size dependent

Fairview PC1464-10 5/8 Tube OD x 5/8 Tube OD x 5/8 Tube OD Brass D.O.T. Push-To-Connect Union Tee Air Brake Fitting. Fairview's Union Tees Feature A Labor Saving Full Flow Design That Requires No Tools

Applications:
• Air brake systems. Used with copper tubing for rigid plumbing along frame and air tank
• Use with J844D Nylon Air Brake Tube
• D.O.T. RECOGNIZED FOR ALL AIR BRAKE APPLICATIONS EXCEPT THOSE FOR USE BETWEEN FRAME AND AXLE OR BETWEEN TOWED AND TOWING VEHICLES

TECHNICAL DATA SHEET

INSTALLATION DATA SHEET

Specifications:
• Fitting Type: Push-To-Connect
• Fitting Style: Union Tee
• Tube OD: 5/8"
• Material: Brass
• Working Temperature: -40°F (-40°C) to 225°F (107°C)
• Weight 0.30 lbs

Fairview GAS-FLO™ 3/8” ID x 120” AOL Type 1 Thermoplastic Propane Hose Assembly with 3/8” 45° SAE Female Swivel Flare x 3/8” 45° SAE Female Swivel Flare Fittings. Fairview's Type 1 Thermoplastic F.SAE Assemblies are CSA Certified to 350 PSI WP -40°F To 140°F

Applications:
• Used To Conduct Natural Gas In A Gaseous State And Propane In Either A Liquid Or Gaseous State Up To 350 P.S.I
• UL/CSA Approved Type 1 Propane/Nat Gas Assy (Type 1 Assy)

TECHNICAL DATA SHEET

Specifications:
• Hose ID: 3/8”
• Assembly Overall Length: 120” (Tolerance ±1% of length measured to the nearest 1/8 of an inch)
• Temperature: -40°F to +140°F
• Color: Black
• Max Pressure: 350 PSI
• End: 3/8” Brass 45° SAE Female Swivel Flare
• End: 3/8” Brass 45° SAE Female Swivel Flare
• TO BE INSTALLED BY LICENSED GAS FITTERS ONLY
• Weight: 1.40 lbs

Fairview GAS-FLO™ 1/4” ID x 120” AOL Type 1 Thermoplastic Propane Hose Assembly with 1”-20 Swivel Male Cylinder Thread x QCC1 Fittings. Fairview's Type 1 Thermoplastic MC X QCC Assemblies are CSA certified to 350 PSI WP -40°F To 140°F

Applications:
• Used To Conduct Natural Gas In A Gaseous State And Propane In Either A Liquid Or Gaseous State Up To 350 P.S.I
• UL/CSA Approved Type 1 Propane/Nat Gas Assy (Type 1 Assy)

TECHNICAL DATA SHEET

Specifications:
• Hose ID: 1/4”
• Assembly Overall Length: 120” (Tolerance ±1% of length measured to the nearest 1/8 of an inch)
• Temperature: -40°F to +140°F
• Hose Color: Black
• Max Pressure: 350 PSI
• End: 1”-20 Swivel Male Cylinder Thread
• End: Black QCC1 ACME
• TO BE INSTALLED BY LICENSED GAS FITTERS ONLY
• Weight: 1.20 lbs

Fairview WR-RV55 Lead-Free RV Water Pressure Regulator 55 PSI. Fairview's Lead-Free R.V. Water Pressure Regulator offers the highest water flow available while maintaining 55 PSI WP Max

Features:
• Lead-Free design
• Keeps outlet pressure at 55 PSI
• Highest water flow available
• Screened washer filters debris
• Fits all standard water hose and riser connections
• Heavy-Duty impact resistant design

Specifications:
• Connections: FWH X MWH
• Weight: 8.2 oz

Fairview Accutek® BVCS2403-D 1/2 FPT 3 Piece Steel High Pressure Full Port Ball Valve 7,250 WOG. Fairview's Carbon Steel 3-Piece Design / High Pressure ball valves are rated up to 7,250 WOG WP

Features:
• Carbon Steel valves for use in hydraulic applications
• 3 Piece design - High Pressure
• Temperature Range: -20°F to +425°F

TECHNICAL DATA SHEET

INSTALLATION DATA SHEET

Specifications:
• WOG: 7,250
• Female Pipe: 1/2 FPT
• Port Style: Full
• Body Material: Carbon steel
• Pipe threads must be sealed using approved thread sealant
• Weight: 1.55 lbs

Fairview GAS-FLO® GR-9950 Low Pressure LP Gas Two Stage Regulator 1/4 FPT In x 3/8 FPT Out 225,000 BTU/HR. Fairview's GAS-FLO® Two Stage LP Gas Regulators are ideal for use on RV's and commercial size grill

Features:
• The X-SERIES* model GR-9950 and GR-9959 regulator combines both a high pressure first stage and a low pressure second stage regulator into a single unit
• Ideally designed for RV applications, these regulators ensure a smooth and continuous flow of gas to all appliances
• Excess Flow
• Zinc Die Cast
• Molded Rubber Diaphragms
• CSA Listed to U.L. 144
• 2nd Stage Relief Mechanism Per U.L. 144
• Adjusting Screw and Dust Cap Design
• Powder Coated

TECHNICAL DATA SHEET

INSTALLATION DATA SHEET

Specifications:
• Inlet: 1/4 FPT
• Outlet: 3/8 FPT
• Vent position: Above Outlet
• Capacity BTU/Hr Propane: 225,000
• TO BE INSTALLED BY LICENSED GAS FITTERS ONLY
• Weight: 1.25 lbs

Fairview FLEX-DOT 1485 Series 1/4" x 100' Red Non-Reinforced Air Brake Tubing - Type 3A. Air brake tube is designed for use with truck, trailer and other mobile air brake and auxiliary systems. This lightweight, flexible and UV stabilized tube is highly resistant to abrasion, oil, grease and road salt

MEETS OR EXCEEDS: D.O.T. F.M.V.S.S. 106 S.A.E. J844 TEST REQUIREMENTS

FLEX-DOT 1485 Series Air Brake Tube is MADE IN CANADA

Compliance:
• All series 1485 tube are designed in compliance with the revised DOT 106 standard which took effect December 24th, 2007
• Fairview’s FLEX-DOT air brake tube is dimensionally identical to the previous air brake tube described in SAE J844 Type A and Type B, and is compatible with the same fittings. Both compression and push-to-connect fittings can be used with FLEX-DOT tube in all applications other than truck to trailer connections, in which push-to-connect fittings are not suitable

Materials:
• Both the core tube and jacket are comprised of a custom formulated elastomer, offering exceptional heat aging, oil resistance, and low temperature flexibility, when compared to previous nylon materials
• With its improved flexibility at all temperatures, the FLEX-DOT tube is easier to install in tight quarters
• The special compound was custom formulated for this application and offers exceptional flexibility even at very low temperatures. Unlike traditional all-nylon tube, the FLEX-DOT elastomer hose can still be flexed at -65C (-85F)

SPECIFICATION SHEET FLEX-DOT SERIES 1485

INSTALLATION DATA SHEET

Specifications:
• Nominal OD: 1/4”
• Inside Diameter ID: 0.170”
• Wall Thickness: 0.040" +/-0.003"
• Length: 100’
• Temperature: -85°F to +200°F, -65°C to +93°C
• Type: 3A, Non-Reinforced
• Color: Red
• Working Pressure: 300 PSI
• Minimum Burst @ 68°F: 1,200 PSI
• Supported Bend Radius: 1.00”
• Unsupported Bend Radius: 1.00”
• Approx. Weight: 1.45 lbs