Fairview USA Inc.

Fairview GAS-FLO® GR-9950 Low Pressure LP Gas Two Stage Regulator 1/4 FPT In x 3/8 FPT Out 225,000 BTU/HR. Fairview's GAS-FLO® Two Stage LP Gas Regulators are ideal for use on RV's and commercial size grill

Features:
• The X-SERIES* model GR-9950 and GR-9959 regulator combines both a high pressure first stage and a low pressure second stage regulator into a single unit
• Ideally designed for RV applications, these regulators ensure a smooth and continuous flow of gas to all appliances
• Excess Flow
• Zinc Die Cast
• Molded Rubber Diaphragms
• CSA Listed to U.L. 144
• 2nd Stage Relief Mechanism Per U.L. 144
• Adjusting Screw and Dust Cap Design
• Powder Coated

TECHNICAL DATA SHEET

INSTALLATION DATA SHEET

Specifications:
• Inlet: 1/4 FPT
• Outlet: 3/8 FPT
• Vent position: Above Outlet
• Capacity BTU/Hr Propane: 225,000
• TO BE INSTALLED BY LICENSED GAS FITTERS ONLY
• Weight: 1.25 lbs

Fairview SRT125-6C 3/8 ID x 3/8 Male Pipe Steel Reusable Hose End s for use with S.A.E. 100R1-AT (NON-SKIVE) hose

TECHNICAL DATA SHEET

INSTALLATION DATA SHEET

Specifications:
• Steel Reusable Hose Ends for use with S.A.E. 100R1-AT (NON-SKIVE) hose
• Medium to high pressure service in the handling of most hydraulic fluids, gasoline, diesel fuels, lubricating oils and water
• Working Temperature: -40°F to +250°F, -40°C to +121°C
• Working Pressure: Are hose size dependent

Accutek® QD-ISOAC16-16F 1 Coupler x 1 Female Pipe ISO Series A 7241-1 Steel 3,000 PSI Quick Disconnect. Fairview's ISO A Interchange Couplers Interchange with Aeroquip 5600, Parker 6600, Safeway S56 and Faster ANV Series

Features:
• Industry interchangeability with other manufacturer's ISO "A" couplers and nipples
• High Strength Steel Construction
• Nitrile NBR seals with PTFE back-up ring
• Proven ball lock mechanism
• 4 : 1 safety factor (Min. Burst = WP. X 4)
• Hydraulic applications where connection and disconnection is required either for maintenance or operation
• For use on truck & trailer, snow plows, agricultural, dump, construction equipment

Specifications:
• Working Pressure: 3,000 PSI
• Body Size: 1
• Female Pipe: 1
• Body Material: Steel
• Temperature Range: -40F to 250F
• Approx. Weight: 1.65 lbs

Fairview SRT125-4B 1/4 ID x 1/4 Male Pipe Steel Reusable Hose End s for use with S.A.E. 100R1-AT (NON-SKIVE) hose

TECHNICAL DATA SHEET

INSTALLATION DATA SHEET

Specifications:
• Steel Reusable Hose Ends for use with S.A.E. 100R1-AT (NON-SKIVE) hose
• Medium to high pressure service in the handling of most hydraulic fluids, gasoline, diesel fuels, lubricating oils and water
• Working Temperature: -40°F to +250°F, -40°C to +121°C
• Working Pressure: Are hose size dependent

Fairview PC1462-12 3/4 Tube OD x 3/4 Tube OD Brass D.O.T. Push-To-Connect Union Coupling Air Brake Fitting. Fairview's Union Couplings Feature A Labor Saving Full Flow Design That Requires No Tools

Applications:
• Air brake systems. Used with copper tubing for rigid plumbing along frame and air tank
• Use with J844D Nylon Air Brake Tube
• D.O.T. RECOGNIZED FOR ALL AIR BRAKE APPLICATIONS EXCEPT THOSE FOR USE BETWEEN FRAME AND AXLE OR BETWEEN TOWED AND TOWING VEHICLES

TECHNICAL DATA SHEET

INSTALLATION DATA SHEET

Specifications:
• Fitting Type: Push-To-Connect
• Fitting Style: Union Coupling
• Tube OD: 3/4"
• Material: Brass
• Working Temperature: -40°F (-40°C) to 225°F (107°C)
• Weight 0.30 lbs

Fairview SRT225-6C 3/8 ID x 3/8 Male Pipe Steel Reusable Hose End s for use with S.A.E. 100R2-AT (NON-SKIVE) hose

TECHNICAL DATA SHEET

INSTALLATION DATA SHEET

Specifications:
• Steel Reusable Hose Ends for use with S.A.E. 100R2-AT (NON-SKIVE) hose
• High pressure service in the handling of most hydraulic fluids, gasoline, diesel fuels, lubricating oils and water
• Working Temperature: -40°F to +250°F, -40°C to +121°C
• Working Pressure: Are hose size dependent

Fairview GAS-FLO™ 1/4” ID x 120” AOL Type 1 Thermoplastic Propane Hose Assembly with 1”-20 Swivel Male Cylinder Thread x QCC1 Fittings. Fairview's Type 1 Thermoplastic MC X QCC Assemblies are CSA certified to 350 PSI WP -40°F To 140°F

Applications:
• Used To Conduct Natural Gas In A Gaseous State And Propane In Either A Liquid Or Gaseous State Up To 350 P.S.I
• UL/CSA Approved Type 1 Propane/Nat Gas Assy (Type 1 Assy)

TECHNICAL DATA SHEET

Specifications:
• Hose ID: 1/4”
• Assembly Overall Length: 120” (Tolerance ±1% of length measured to the nearest 1/8 of an inch)
• Temperature: -40°F to +140°F
• Hose Color: Black
• Max Pressure: 350 PSI
• End: 1”-20 Swivel Male Cylinder Thread
• End: Black QCC1 ACME
• TO BE INSTALLED BY LICENSED GAS FITTERS ONLY
• Weight: 1.20 lbs

Fairview PC1474SW-10D 5/8 Tube OD x 1/2 MPT Brass D.O.T. Push-To-Connect 45° Male Swivel Elbow Air Brake Fitting. Fairview's 45° Male Pipe Swivel Elbows Feature A Labor Saving Full Flow Design That Requires No Tools

Applications:
• Air brake systems. Used with copper tubing for rigid plumbing along frame and air tank
• Use with J844D Nylon Air Brake Tube
• D.O.T. RECOGNIZED FOR ALL AIR BRAKE APPLICATIONS EXCEPT THOSE FOR USE BETWEEN FRAME AND AXLE OR BETWEEN TOWED AND TOWING VEHICLES

TECHNICAL DATA SHEET

INSTALLATION DATA SHEET

Specifications:
• Fitting Type: Push-To-Connect
• Fitting Style: 45° Male Swivel Elbow
• Tube OD: 5/8"
• Pipe Thread: 1/2" MPT
• Material: Brass
• Working Temperature: -40°F (-40°C) to 225°F (107°C)
• Weight 0.24 lbs

Fairview GAS-FLO™ 3/8” ID x 120” AOL Type 1 Thermoplastic Propane Hose Assembly with 3/8” 45° SAE Female Swivel Flare x 3/8” 45° SAE Female Swivel Flare Fittings. Fairview's Type 1 Thermoplastic F.SAE Assemblies are CSA Certified to 350 PSI WP -40°F To 140°F

Applications:
• Used To Conduct Natural Gas In A Gaseous State And Propane In Either A Liquid Or Gaseous State Up To 350 P.S.I
• UL/CSA Approved Type 1 Propane/Nat Gas Assy (Type 1 Assy)

TECHNICAL DATA SHEET

Specifications:
• Hose ID: 3/8”
• Assembly Overall Length: 120” (Tolerance ±1% of length measured to the nearest 1/8 of an inch)
• Temperature: -40°F to +140°F
• Color: Black
• Max Pressure: 350 PSI
• End: 3/8” Brass 45° SAE Female Swivel Flare
• End: 3/8” Brass 45° SAE Female Swivel Flare
• TO BE INSTALLED BY LICENSED GAS FITTERS ONLY
• Weight: 1.40 lbs

Fairview RV-TANK-KIT24BLK Dual Tank Mounting Kit for 30 lbs Vertical LP Gas Tanks. Fairview's Tank Pan Kit Components are designed to fit 30LB RV Propane Tanks

Specifications:
• (1) Threaded bar for 30 lb
• (1) Top hold down bar
• (1) Black double tank pan
• (1) Galvanized wingnut
• Weight: 7.60 lbs

Fairview Accutek® BVCS2403-D 1/2 FPT 3 Piece Steel High Pressure Full Port Ball Valve 7,250 WOG. Fairview's Carbon Steel 3-Piece Design / High Pressure ball valves are rated up to 7,250 WOG WP

Features:
• Carbon Steel valves for use in hydraulic applications
• 3 Piece design - High Pressure
• Temperature Range: -20°F to +425°F

TECHNICAL DATA SHEET

INSTALLATION DATA SHEET

Specifications:
• WOG: 7,250
• Female Pipe: 1/2 FPT
• Port Style: Full
• Body Material: Carbon steel
• Pipe threads must be sealed using approved thread sealant
• Weight: 1.55 lbs

Fairview RV-TANK-KIT18BLK Dual Tank Mounting Kit for 20 lbs Vertical LP Gas Tanks. Fairview's Tank Pan Kit Components are designed to fit 20LB RV Propane Tanks

Specifications:
• (1) Threaded bar for 20 lb
• (1) Top hold down bar
• (1) Black double tank pan
• (1) Galvanized wingnut
• Weight: 7.35 lbs

Fairview GAS-FLO™ BV2103-J 1-1/4" FPT Forged Brass Ball Valve 600 WOG, 150 WSP. Fairview's Forged Brass Ball Valves are full port and CSA, CGA & UL certified

TECHNICAL DATA SHEET

INSTALLATION DATA SHEET

Features:
• Brass valves for use in W.O.G. = Water, Oil and Gas; W.S.P. = Working Steam Pressure applications
• Two piece Body
• Full Port
• Blowout-Proof Stem
• PTFE Seats
• CSA - ANSI Z21.15/CGA 9.1, ASME B16.44, CGA CR 91-00
• CAN/CGA 3.16, ASME B16.33 & ASME B16.38
• UL 842 (MHKZ): Manual valves-250 psi

Specifications:
• W.O.G: 600
• W.S.P: 150
• Pipe Size: 1-1/4” FPT
• Connection Type: Female to Female
• Materials: Brass C3700, Chrome & Nickel Plated Steel, PTFE
• Weight: 1.58 lbs

Fairview Accutek® BVCS2403-C 3/8 FPT 3 Piece Steel High Pressure Full Port Ball Valve 7,250 WOG. Fairview's Carbon Steel 3-Piece Design / High Pressure ball valves are rated up to 7,250 WOG WP

Features:
• Carbon Steel valves for use in hydraulic applications
• 3 Piece design - High Pressure
• Temperature Range: -20°F to +425°F

TECHNICAL DATA SHEET

INSTALLATION DATA SHEET

Specifications:
• WOG: 7,250
• Female Pipe: 3/8 FPT
• Port Style: Full
• Body Material: Carbon steel
• Pipe threads must be sealed using approved thread sealant
• Weight: 1.20 lbs

Accutek® S1016-H Steel 90° Street Elbow 1 Male Pipe x 1 Female Pipe Hydraulic Fitting. Fairview's SAE steel pipe fittings create a stress-generated seal.

Specifications:
• Applications - Water, Oil, Air
• Working Pressure: 2,000 PSI
• Burst Pressure: 8,000 PSI
• Working Temperature: -65°F (-54°C) to 250°F (120°C)
• Pipe threads must be sealed using approved thread sealant
• Weight: 1.20 lbs

Fairview PC1464-10 5/8 Tube OD x 5/8 Tube OD x 5/8 Tube OD Brass D.O.T. Push-To-Connect Union Tee Air Brake Fitting. Fairview's Union Tees Feature A Labor Saving Full Flow Design That Requires No Tools

Applications:
• Air brake systems. Used with copper tubing for rigid plumbing along frame and air tank
• Use with J844D Nylon Air Brake Tube
• D.O.T. RECOGNIZED FOR ALL AIR BRAKE APPLICATIONS EXCEPT THOSE FOR USE BETWEEN FRAME AND AXLE OR BETWEEN TOWED AND TOWING VEHICLES

TECHNICAL DATA SHEET

INSTALLATION DATA SHEET

Specifications:
• Fitting Type: Push-To-Connect
• Fitting Style: Union Tee
• Tube OD: 5/8"
• Material: Brass
• Working Temperature: -40°F (-40°C) to 225°F (107°C)
• Weight 0.30 lbs

Accutek® QD-ISOAC12-12F 3/4 Coupler x 3/4 Female Pipe ISO Series A 7241-1 Steel 4,000 PSI Quick Disconnect. Fairview's ISO A Interchange Couplers Interchange with Aeroquip 5600, Parker 6600, Safeway S56 and Faster ANV Series

Features:
• Industry interchangeability with other manufacturer's ISO "A" couplers and nipples
• High Strength Steel Construction
• Nitrile NBR seals with PTFE back-up ring
• Proven ball lock mechanism
• 4 : 1 safety factor (Min. Burst = WP. X 4)
• Hydraulic applications where connection and disconnection is required either for maintenance or operation
• For use on truck & trailer, snow plows, agricultural, dump, construction equipment

Specifications:
• Working Pressure: 4,000 PSI
• Body Size: 3/4
• Female Pipe: 3/4
• Body Material: Steel
• Temperature Range: -40F to 250F
• Approx. Weight: 1.10 lbs

Fairview QD-GMC8-8F GAS-FLO™ 1/2” Coupler x 1/2” FPT LPG/Nat. Gas Quick Disconnect. Fairview's CSA LPG/Nat. Gas Couplers are CSA Certified up to 60 PSI WP

Features:
• C.S.A. GAS INTERCHANGE QUICK DISCONNECTS (QD-GMC)
• CSA certified to Z21.41/CSA6.9 for Natural Gas and LP-Gas – air mixtures
• All QD-GMC Quick Disconnects Rated To 60 P.S.I.
• QD-GMC Sizes 1/4, 3/8, 1/2 & 3/4 Quick Disconnects Are Rated To A Temperature -40°F

TECHNICAL DATA SHEET

INSTALLATION INSTRUCTIONS

Specifications:
• Coupler (Body Size): 1/2
• Female Pipe Thread: 1/2
• Quick Disconnect BTU Capacity: 120,000
• Material: Brass
• Weight: 7.4 oz

Fairview GAS-FLO™ 1/4” ID x 96” AOL Type 1 Thermoplastic Propane Hose Assembly with RV QD Coupler x QD Nipple Fittings Fairview's Type 1 Thermoplastic RV Outside Appliance Quick Disconnect Hoses are CSA Certified to 350 PSI WP -40°F To 140°F

Applications:
• Used To Conduct Natural Gas In A Gaseous State And Propane In Either A Liquid Or Gaseous State Up To 350 P.S.I
• UL/CSA Approved Type 1 Propane/Nat Gas Assy (Type 1 Assy)

TECHNICAL DATA SHEET

INSTALLATION INSTRUCTIONS

Specifications:
• Hose ID: 1/4”
• Assembly Overall Length: 96” (Tolerance ±1% of length measured to the nearest 1/8 of an inch)
• Temperature: -40°F to +140°F
• Color: Black
• Max Pressure: 350 PSI
• End: 1/4” Brass RV QD Coupler
• End: 1/4” Brass RV QD Nipple
• TO BE INSTALLED BY LICENSED GAS FITTERS ONLY
• Weight: 0.95 lbs

Fairview GAS-FLO™ 2001-S Manifold Block Tee Assembly with O-Ring Female POL (2) x Male POL. Fairview's Female POL Tee is ideal for adding a second gas appliance to an LP-Gas system

Specifications:
• End (2): Female POL
• End: Male POL
• Material: Brass
• TO BE INSTALLED BY LICENSED GAS FITTERS ONLY
• Weight: 12.0 oz