Suttner America

1/4” Suttner #7.0 ST-49 Milling Sewer Cleaning Nozzle. With 3 Front and 4 Rear jets and rated to 5,076 PSI

Features:
• High Quality, German engineered components
• With its 3 very strong concentrated forward jets and the sharp cutting edges the milling type nozzles will tear through almost any kind of blockage
• The sharp edges cut, break and penetrate through every kind of blockage
• Made out of wear-resistant, hardened stainless steel
• Centric jet is plugged
• 3 Lateral front jets 0.5 mm drilled
• 4 Rear jets with nozzle inserts
• Nozzle is equipped with replaceable hardened stainless steel centric front and rear jets
• Due to this feature the efficiency is considerably higher compared with those nozzles with drilled holes and the service life is several times longer

Applications:
• Penetration of completely clogged pipes
• Opening of root masses
• Opening of frozen pipelines
• Hydraulic thrust boring flushing operations

Specifications:
• Nozzle Size: # 7.0
• Material: Stainless steel
• Maximum Pressure: 5,076 PSI
• Inlet: 1/4” Female
• Outside Diameter (O.D.): .95”
• Weight: 2.8 oz

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

1/4” Suttner #6.0 ST-49 Milling Sewer Cleaning Nozzle. With 3 Front and 4 Rear jets and rated to 5,076 PSI

Features:
• High Quality, German engineered components
• With its 3 very strong concentrated forward jets and the sharp cutting edges the milling type nozzles will tear through almost any kind of blockage
• The sharp edges cut, break and penetrate through every kind of blockage
• Made out of wear-resistant, hardened stainless steel
• Centric jet is plugged
• 3 Lateral front jets 0.5 mm drilled
• 4 Rear jets with nozzle inserts
• Nozzle is equipped with replaceable hardened stainless steel centric front and rear jets
• Due to this feature the efficiency is considerably higher compared with those nozzles with drilled holes and the service life is several times longer

Applications:
• Penetration of completely clogged pipes
• Opening of root masses
• Opening of frozen pipelines
• Hydraulic thrust boring flushing operations

Specifications:
• Nozzle Size: # 6.0
• Material: Stainless steel
• Maximum Pressure: 5,076 PSI
• Inlet: 1/4” Female
• Outside Diameter (O.D.): .95”
• Weight: 2.8 oz

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

1/2” Suttner #10.0 ST-49 Milling Sewer Cleaning Nozzle. With 3 Front and 6 Rear jets and rated to 5,076 PSI

Features:
• High Quality, German engineered components
• With its 3 very strong concentrated forward jets and the sharp cutting edges the milling type nozzles will tear through almost any kind of blockage
• The sharp edges cut, break and penetrate through every kind of blockage
• Made out of wear-resistant, hardened stainless steel
• Centric jet is plugged
• 3 Lateral front jets with nozzle inserts
• 6 Rear jets with nozzle inserts
• Nozzle is equipped with replaceable hardened stainless steel nozzle inserts
• Due to this feature the efficiency is considerably higher compared with those nozzles with drilled holes and the service life is several times longer

Applications:
• Penetration of completely clogged pipes
• Opening of root masses
• Opening of frozen pipelines
• Hydraulic thrust boring flushing operations

Specifications:
• Nozzle Size: # 10.0
• Material: Stainless steel
• Maximum Pressure: 5,076 PSI
• Inlet: 1/2” Female
• Outside Diameter (O.D.): 1.23”
• Weight: 5.7 oz

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

1/2” F Suttner #12.0 ST-49 Turbo Nozzle Driver With 6 Rear jet inserts and rated to 7,252 PSI

Features:
• High Quality, German engineered components
• Turbo nozzle driver and ST-457 or ST-559 turbo nozzle are the perfect combination for drilling through blockages with its rotary forward facing jet
• Driven up to the blockage by 6 powerful rear facing hardened stainless steel nozzles the high speed forward facing spinning jet creates a cone shape that has enough cutting force to blast through roots and scale
• It is also ideal for cutting up and shredding tissue and fat deposits

Note:
• Above shown item (1st Picture) is for the driver portion only
• You will have to add the corresponding ST-457 or ST-559 turbo nozzle to complete the driver (2nd Picture)

Specifications:
• Material: Hardened stainless steel
• Maximum Pressure: 7,252 PSI
• Inlet (Sewer Hose): 1/2” Female
• Outlet (Turbo Nozzle): 1/4” Male
• Nozzle Size: # 12.0 (With a #4.5 ST-457 or #5.0 ST-559 nozzle)
• Note: Requires #4.5 ST-457 or #5.0 ST-559 1/4” turbo nozzle (Not Included)
• Weight: 0.30 lbs

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

1/2” Suttner #8.0 Static Hydro-Excavation Nozzle. With 1 Centric and 3 Front jets at 15° and rated to 7,250 PSI. Designed specifically for slicing and busting up soil during hydro excavating application

Features:
• High Quality, German engineered components
• Nozzle body made out of wear-resistant, hardened stainless steel
• 1 Centric front jet with nozzle insert
• 3 Front jets at 15° with nozzle inserts
• Low maintenance, fast and effective
• Optimum stream quality resulting in faster digging speed
• Ideal for areas with access issues
• Working depths up to 13’ from ground level
• Available in nozzle sizes from 2.0 to 35.0

Specifications:
• Nozzle Size: # 8.0
• Body Material: Hardened stainless steel
• Maximum Pressure: 7,250 PSI
• Inlet: 1/2” Female NPT
• Max. Temperature: 212° F
• Weight: 0.25 lbs

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

1/2” Suttner #10.0 Static Hydro-Excavation Nozzle. With 1 Centric and 3 Front jets at 15° and rated to 7,250 PSI. Designed specifically for slicing and busting up soil during hydro excavating application

Features:
• High Quality, German engineered components
• Nozzle body made out of wear-resistant, hardened stainless steel
• 1 Centric front jet with nozzle insert
• 3 Front jets at 15° with nozzle inserts
• Low maintenance, fast and effective
• Optimum stream quality resulting in faster digging speed
• Ideal for areas with access issues
• Working depths up to 13’ from ground level
• Available in nozzle sizes from 2.0 to 35.0

Specifications:
• Nozzle Size: # 10.0
• Body Material: Hardened stainless steel
• Maximum Pressure: 7,250 PSI
• Inlet: 1/2” Female NPT
• Max. Temperature: 212° F
• Weight: 0.25 lbs

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

1/2” Suttner #15.0 Static Hydro-Excavation Nozzle. With 1 Centric and 3 Front jets at 15° and rated to 7,250 PSI. Designed specifically for slicing and busting up soil during hydro excavating application

Features:
• High Quality, German engineered components
• Nozzle body made out of wear-resistant, hardened stainless steel
• 1 Centric front jet with nozzle insert
• 3 Front jets at 15° with nozzle inserts
• Low maintenance, fast and effective
• Optimum stream quality resulting in faster digging speed
• Ideal for areas with access issues
• Working depths up to 13’ from ground level
• Available in nozzle sizes from 2.0 to 35.0

Specifications:
• Nozzle Size: # 15.0
• Body Material: Hardened stainless steel
• Maximum Pressure: 7,250 PSI
• Inlet: 1/2” Female NPT
• Max. Temperature: 212° F
• Weight: 0.25 lbs

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

1/2” Suttner #20.0 Static Hydro-Excavation Nozzle. With 1 Centric and 3 Front jets at 15° and rated to 7,250 PSI. Designed specifically for slicing and busting up soil during hydro excavating application

Features:
• High Quality, German engineered components
• Nozzle body made out of wear-resistant, hardened stainless steel
• 1 Centric front jet with nozzle insert
• 3 Front jets at 15° with nozzle inserts
• Low maintenance, fast and effective
• Optimum stream quality resulting in faster digging speed
• Ideal for areas with access issues
• Working depths up to 13’ from ground level
• Available in nozzle sizes from 2.0 to 35.0

Specifications:
• Nozzle Size: # 20.0
• Body Material: Hardened stainless steel
• Maximum Pressure: 7,250 PSI
• Inlet: 1/2” Female NPT
• Max. Temperature: 212° F
• Weight: 0.25 lbs

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

1/2” Suttner #25.0 Static Hydro-Excavation Nozzle. With 1 Centric and 3 Front jets at 15° and rated to 7,250 PSI. Designed specifically for slicing and busting up soil during hydro excavating application

Features:
• High Quality, German engineered components
• Nozzle body made out of wear-resistant, hardened stainless steel
• 1 Centric front jet with nozzle insert
• 3 Front jets at 15° with nozzle inserts
• Low maintenance, fast and effective
• Optimum stream quality resulting in faster digging speed
• Ideal for areas with access issues
• Working depths up to 13’ from ground level
• Available in nozzle sizes from 2.0 to 35.0

Specifications:
• Nozzle Size: # 25.0
• Body Material: Hardened stainless steel
• Maximum Pressure: 7,250 PSI
• Inlet: 1/2” Female NPT
• Max. Temperature: 212° F
• Weight: 0.25 lbs

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

1/2” Suttner #30.0 Static Hydro-Excavation Nozzle. With 1 Centric and 3 Front jets at 15° and rated to 7,250 PSI. Designed specifically for slicing and busting up soil during hydro excavating application

Features:
• High Quality, German engineered components
• Nozzle body made out of wear-resistant, hardened stainless steel
• 1 Centric front jet with nozzle insert
• 3 Front jets at 15° with nozzle inserts
• Low maintenance, fast and effective
• Optimum stream quality resulting in faster digging speed
• Ideal for areas with access issues
• Working depths up to 13’ from ground level
• Available in nozzle sizes from 2.0 to 35.0

Specifications:
• Nozzle Size: # 30.0
• Body Material: Hardened stainless steel
• Maximum Pressure: 7,250 PSI
• Inlet: 1/2” Female NPT
• Max. Temperature: 212° F
• Weight: 0.25 lbs

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

1/2” Suttner #12.0 Static Hydro-Excavation Nozzle. With 1 Centric and 3 Front jets at 15° and rated to 7,250 PSI. Designed specifically for slicing and busting up soil during hydro excavating application

Features:
• High Quality, German engineered components
• Nozzle body made out of wear-resistant, hardened stainless steel
• 1 Centric front jet with nozzle insert
• 3 Front jets at 15° with nozzle inserts
• Low maintenance, fast and effective
• Optimum stream quality resulting in faster digging speed
• Ideal for areas with access issues
• Working depths up to 13’ from ground level
• Available in nozzle sizes from 2.0 to 35.0

Specifications:
• Nozzle Size: # 12.0
• Body Material: Hardened stainless steel
• Maximum Pressure: 7,250 PSI
• Inlet: 1/2” Female NPT
• Max. Temperature: 212° F
• Weight: 0.25 lbs

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

1/2” Suttner #5.5 Static Hydro-Excavation Nozzle. With 1 Centric and 3 Front jets at 15° and rated to 7,250 PSI. Designed specifically for slicing and busting up soil during hydro excavating application

Features:
• High Quality, German engineered components
• Nozzle body made out of wear-resistant, hardened stainless steel
• 1 Centric front jet with nozzle insert
• 3 Front jets at 15° with nozzle inserts
• Low maintenance, fast and effective
• Optimum stream quality resulting in faster digging speed
• Ideal for areas with access issues
• Working depths up to 13’ from ground level
• Available in nozzle sizes from 2.0 to 35.0

Specifications:
• Nozzle Size: # 5.5
• Body Material: Hardened stainless steel
• Maximum Pressure: 7,250 PSI
• Inlet: 1/2” Female NPT
• Max. Temperature: 212° F
• Weight: 0.25 lbs

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

Suttner ST-8 Adjustable Float Valve Assembly with 1/2'' FNPT Inlet. Used to regulate the maximum water level in a float tank. When the maximum water level drops the float valve opens

Features:
• Valve housing and connection are corrosion resistant material, brass and plastics
• Adjustable float

Specifications:
• Inlet: 1/2" FNPT
• Max Pressure: 140 PSI
• Max. Temperature: 178° F.
• Flow Rate: 5 GPM
• Weight 0.44 lbs

Suttner ST-10 & ST-11 Polypropylene 1.8 Gallon Float Tank & Lid. Complete float tank & lid used in regulating a constant flow of water to the pressure washer

Features:
• 100% polypropylene, wont rust
• Mount ST-8 float valve anywhere needed

Specifications:
• Capacity: 1.8 Gallons
• Dimensions: 13 3/4” L x 5 1/2” W x 6 3/4” H
• Weight 1.38 lbs

Suttner ST-73.2 Foamer with 32 oz. Bottle, Stainless Steel Integrated Injector, 1/4" F Inlet. Convenient and portable for more effective foam cleaning for Industry, Agriculture, Automotive/Fleet and Institutional applications! By turning an adjustable grip handle the concentration of foaming agent in the water can be adjusted. Our latest innovation realizes an ideal mixing of air and cleaning agent, thus succeeding an ideal foam result

Features
• 5 Position metering valve for chemical draw
• Sometimes, less is more! This version of our foam injector lance is equipped with a mesh strainer instead of a foam pad. Not being equipped with a foam pad contributes to the fact that blockages can be almost ruled out
• Adjustable nozzle - with a simple twist you can change from a horizontal spray to a vertical spray
• A completely stainless steel and non-corrosive injector unit
• The highest grade of chemical resistance
• Easy to fill wide mouth bottle with fill markings
• Integrated injector (no additional injector required)

Concentration Rates
• Setting 1: 2 - 2.5%
• Setting 2: 4 - 4.5%
• Setting 3: 5 - 5.5%
• Setting 4: 6.5 - 7%
• Setting 5: 7.5 - 8%

See ST-73.2 in action on YouTube

Specifications
• Pressure: 1,000 - 4,350 PSI
• Flow Rate: 1.32 – 5.2 GPM
• Max Temp: 100° F.
• Inlet: 1/4" Female
• Bottle: 32 oz
• Weight: 1.10 lb

Suttner ST-73.2 Foamer with 64 oz. Bottle, Stainless Steel Integrated Injector, 1/4" F Inlet. Convenient and portable for more effective foam cleaning for Industry, Agriculture, Automotive/Fleet and Institutional applications! By turning an adjustable grip handle the concentration of foaming agent in the water can be adjusted. Our latest innovation realizes an ideal mixing of air and cleaning agent, thus succeeding an ideal foam result

Features
• 5 Position metering valve for chemical draw
• Sometimes, less is more! This version of our foam injector lance is equipped with a mesh strainer instead of a foam pad. Not being equipped with a foam pad contributes to the fact that blockages can be almost ruled out
• Adjustable nozzle - with a simple twist you can change from a horizontal spray to a vertical spray
• A completely stainless steel and non-corrosive injector unit
• The highest grade of chemical resistance
• Easy to fill wide mouth bottle with fill markings
• Integrated injector (no additional injector required)

Concentration Rates
• Setting 1: 2 - 2.5%
• Setting 2: 4 - 4.5%
• Setting 3: 5 - 5.5%
• Setting 4: 6.5 - 7%
• Setting 5: 7.5 - 8%

See ST-73.2 in action on YouTube

See ST-73 in action on YouTube

Specifications
• Pressure: 1,000 - 4,350 PSI
• Flow Rate: 1.32 – 5.2 GPM
• Max Temp: 100° F.
• Inlet: 1/4" Female
• Bottle: 64 oz
• Weight: 1.20 lb

1/4” F Suttner #6.5 ST-49 Turbo Nozzle Driver With 6 Rear jet inserts and rated to 5,076 PSI

Features:
• High Quality, German engineered components
• Turbo nozzle driver and ST-356 or ST-456 turbo nozzle are the perfect combination for drilling through blockages with its rotary forward facing jet
• Driven up to the blockage by 6 powerful rear facing hardened stainless steel nozzles the high speed forward facing spinning jet creates a cone shape that has enough cutting force to blast through roots and scale
• It is also ideal for cutting up and shredding tissue and fat deposits

Note:
• Above shown item (1st Picture) is for the driver portion only
• You will have to add the corresponding ST-357 or ST-456 turbo nozzle to complete the driver (2nd Picture)

Specifications:
• Material: Hardened stainless steel
• Maximum Pressure: 5,076 PSI
• Inlet (Sewer Hose): 1/4” Female
• Outlet (Turbo Nozzle): 1/4” Male
• Nozzle Size: # 6.5 (With a #3.0 ST-357 or ST-456 nozzle)
• Note: Requires #3.0 ST-357 or ST-456 1/4” turbo nozzle (Not Included)
• Weight: 0.20 lbs

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart