Suttner America

Suttner ST-740 Stainless Steel Screw Coupling, 1/2" M x M24-15MM F 10,150 PSI

Features:
• Stainless steel construction for chemical & food applications
• Ideal for connections that have to be changed
• HNBR O-Ring

Specifications:
• Max. Pressure: 10,150 PSI
• Max. Temp: 300°
• Body Material: Stainless steel
• Size: 1/2” MBSP x M24
• Yoke: M15
• Weight: 0.35 lbs

Suttner ST-73.2 Foamer with 64 oz. Bottle, Stainless Steel Integrated Injector, 1/4" F Inlet. Convenient and portable for more effective foam cleaning for Industry, Agriculture, Automotive/Fleet and Institutional applications! By turning an adjustable grip handle the concentration of foaming agent in the water can be adjusted. Our latest innovation realizes an ideal mixing of air and cleaning agent, thus succeeding an ideal foam result

Features
• 5 Position metering valve for chemical draw
• Sometimes, less is more! This version of our foam injector lance is equipped with a mesh strainer instead of a foam pad. Not being equipped with a foam pad contributes to the fact that blockages can be almost ruled out
• Adjustable nozzle - with a simple twist you can change from a horizontal spray to a vertical spray
• A completely stainless steel and non-corrosive injector unit
• The highest grade of chemical resistance
• Easy to fill wide mouth bottle with fill markings
• Integrated injector (no additional injector required)

Concentration Rates
• Setting 1: 2 - 2.5%
• Setting 2: 4 - 4.5%
• Setting 3: 5 - 5.5%
• Setting 4: 6.5 - 7%
• Setting 5: 7.5 - 8%

See ST-73.2 in action on YouTube

See ST-73 in action on YouTube

Specifications
• Pressure: 1,000 - 4,350 PSI
• Flow Rate: 1.32 – 5.2 GPM
• Max Temp: 100° F.
• Inlet: 1/4" Female
• Bottle: 64 oz
• Weight: 1.20 lb

Suttner ST-73.2 Foamer with 32 oz. Bottle, Stainless Steel Integrated Injector, 1/4" F Inlet. Convenient and portable for more effective foam cleaning for Industry, Agriculture, Automotive/Fleet and Institutional applications! By turning an adjustable grip handle the concentration of foaming agent in the water can be adjusted. Our latest innovation realizes an ideal mixing of air and cleaning agent, thus succeeding an ideal foam result

Features
• 5 Position metering valve for chemical draw
• Sometimes, less is more! This version of our foam injector lance is equipped with a mesh strainer instead of a foam pad. Not being equipped with a foam pad contributes to the fact that blockages can be almost ruled out
• Adjustable nozzle - with a simple twist you can change from a horizontal spray to a vertical spray
• A completely stainless steel and non-corrosive injector unit
• The highest grade of chemical resistance
• Easy to fill wide mouth bottle with fill markings
• Integrated injector (no additional injector required)

Concentration Rates
• Setting 1: 2 - 2.5%
• Setting 2: 4 - 4.5%
• Setting 3: 5 - 5.5%
• Setting 4: 6.5 - 7%
• Setting 5: 7.5 - 8%

See ST-73.2 in action on YouTube

Specifications
• Pressure: 1,000 - 4,350 PSI
• Flow Rate: 1.32 – 5.2 GPM
• Max Temp: 100° F.
• Inlet: 1/4" Female
• Bottle: 32 oz
• Weight: 1.10 lb

Suttner ST-72F Stainless Steel Food Grade 23.5” Vented Grip Foam Lance with #3.0 mm (Blue) Air Injector Nozzle and 1/4" M Inlet. In conjunction with a spray gun and Suttner foam injector, allows cleaning agents or disinfectants to be applied evenly over a large surface. Stainless steel construction

Features
• Thick foam is produced when air flows through vented injector housing and mixes with water and chemical stream
• Wet foam allows more efficient use of chemical
• More durable than conventional foamers
• Food grade - Stainless steel and plastic intended to come into contact with foodstuffs

Specifications
• Air Injector Nozzle Size: 3.0 mm (Blue)
• Max Pressure: 3,625 PSI
• Length: 23.5”
• Max Temp: 176° F.
• Inlet: 1/4" Male
• Note: Suttner ST-160, ST-160M or St-164 Chemical or Foam injector required and is not included
• Weight: 1.50 lb

Please use Nozzle Chart to determine proper Spray Nozzle Size

Nozzle Chart

Use Spray Nozzle Size and Foam Lance Chart to determine correct Air Injector Nozzle Size to use

Foam Lance Chart

Suttner ST-72F Stainless Steel Food Grade 23.5” Vented Grip Foam Lance with #2.3 mm (Yellow) Air Injector Nozzle and 1/4" M Inlet. In conjunction with a spray gun and Suttner foam injector, allows cleaning agents or disinfectants to be applied evenly over a large surface. Stainless steel construction

Features
• Thick foam is produced when air flows through vented injector housing and mixes with water and chemical stream
• Wet foam allows more efficient use of chemical
• More durable than conventional foamers
• Food grade - Stainless steel and plastic intended to come into contact with foodstuffs

Specifications
• Air Injector Nozzle Size: 2.3 mm (Yellow)
• Max Pressure: 3,625 PSI
• Length: 23.5”
• Max Temp: 176° F.
• Inlet: 1/4" Male
• Note: Suttner ST-160, ST-160M or St-164 Chemical or Foam injector required and is not included
• Weight: 1.50 lb

Please use Nozzle Chart to determine proper Spray Nozzle Size

Nozzle Chart

Use Spray Nozzle Size and Foam Lance Chart to determine correct Air Injector Nozzle Size to use

Foam Lance Chart

Suttner ST-72F Stainless Steel Food Grade 23.5” Vented Grip Foam Lance with #2.0 mm (Green) Air Injector Nozzle and 1/4" M Inlet. In conjunction with a spray gun and Suttner foam injector, allows cleaning agents or disinfectants to be applied evenly over a large surface. Stainless steel construction

Features
• Thick foam is produced when air flows through vented injector housing and mixes with water and chemical stream
• Wet foam allows more efficient use of chemical
• More durable than conventional foamers
• Food grade - Stainless steel and plastic intended to come into contact with foodstuffs

Specifications
• Air Injector Nozzle Size: 2.0 mm (Green)
• Max Pressure: 3,625 PSI
• Length: 23.5”
• Max Temp: 176° F.
• Inlet: 1/4" Male
• Note: Suttner ST-160, ST-160M or St-164 Chemical or Foam injector required and is not included
• Weight: 1.50 lb

Please use Nozzle Chart to determine proper Spray Nozzle Size

Nozzle Chart

Use Spray Nozzle Size and Foam Lance Chart to determine correct Air Injector Nozzle Size to use

Foam Lance Chart

Suttner ST-72 Stainless Steel 47.25” Vented Grip Foam Lance with #3.2 mm (Red) Air Injector Nozzle and 1/4" M Inlet. In conjunction with a spray gun and Suttner foam injector, allows cleaning agents or disinfectants to be applied evenly over a large surface. Stainless steel construction

Features
• Thick foam is produced when air flows through vented injector housing and mixes with water and chemical stream
• Wet foam allows more efficient use of chemical
• More durable than conventional foamers

Specifications
• Air Injector Nozzle Size: 3.2 mm (Red)
• Max Pressure: 3,625 PSI
• Length: 47.25”
• Max Temp: 176° F.
• Inlet: 1/4" Male
• Note: Suttner ST-160, ST-160M or St-164 Chemical or Foam injector required and is not included
• Weight: 2.45 lb

Please use Nozzle Chart to determine proper Spray Nozzle Size

Nozzle Chart

Use Spray Nozzle Size and Foam Lance Chart to determine correct Air Injector Nozzle Size to use

Foam Lance Chart

Suttner ST-72 Stainless Steel 47.25” Vented Grip Foam Lance with #3.0 mm (Blue) Air Injector Nozzle and 1/4" M Inlet. In conjunction with a spray gun and Suttner foam injector, allows cleaning agents or disinfectants to be applied evenly over a large surface. Stainless steel construction

Features
• Thick foam is produced when air flows through vented injector housing and mixes with water and chemical stream
• Wet foam allows more efficient use of chemical
• More durable than conventional foamers

Specifications
• Air Injector Nozzle Size: 3.0 mm (Blue)
• Max Pressure: 3,625 PSI
• Length: 47.25”
• Max Temp: 176° F.
• Inlet: 1/4" Male
• Note: Suttner ST-160, ST-160M or St-164 Chemical or Foam injector required and is not included
• Weight: 2.45 lb

Please use Nozzle Chart to determine proper Spray Nozzle Size

Nozzle Chart

Use Spray Nozzle Size and Foam Lance Chart to determine correct Air Injector Nozzle Size to use

Foam Lance Chart

Suttner ST-72 Stainless Steel 47.25” Vented Grip Foam Lance with #2.3 mm (Yellow) Air Injector Nozzle and 1/4" M Inlet. In conjunction with a spray gun and Suttner foam injector, allows cleaning agents or disinfectants to be applied evenly over a large surface. Stainless steel construction

Features
• Thick foam is produced when air flows through vented injector housing and mixes with water and chemical stream
• Wet foam allows more efficient use of chemical
• More durable than conventional foamers

Specifications
• Air Injector Nozzle Size: 2.3 mm (Yellow)
• Max Pressure: 3,625 PSI
• Length: 47.25”
• Max Temp: 176° F.
• Inlet: 1/4" Male
• Note: Suttner ST-160, ST-160M or St-164 Chemical or Foam injector required and is not included
• Weight: 2.45 lb

Please use Nozzle Chart to determine proper Spray Nozzle Size

Nozzle Chart

Use Spray Nozzle Size and Foam Lance Chart to determine correct Air Injector Nozzle Size to use

Foam Lance Chart

Suttner ST-72 Stainless Steel 47.25” Vented Grip Foam Lance with #2.0 mm (Green) Air Injector Nozzle and 1/4" M Inlet. In conjunction with a spray gun and Suttner foam injector, allows cleaning agents or disinfectants to be applied evenly over a large surface. Stainless steel construction

Features
• Thick foam is produced when air flows through vented injector housing and mixes with water and chemical stream
• Wet foam allows more efficient use of chemical
• More durable than conventional foamers

Specifications
• Air Injector Nozzle Size: 2.0 mm (Green)
• Max Pressure: 3,625 PSI
• Length: 47.25”
• Max Temp: 176° F.
• Inlet: 1/4" Male
• Note: Suttner ST-160, ST-160M or St-164 Chemical or Foam injector required and is not included
• Weight: 2.45 lb

Please use Nozzle Chart to determine proper Spray Nozzle Size

Nozzle Chart

Use Spray Nozzle Size and Foam Lance Chart to determine correct Air Injector Nozzle Size to use

Foam Lance Chart

Suttner ST-72 Stainless Steel 23.5” Vented Grip Foam Lance with #3.2 mm (Red) Air Injector Nozzle and 1/4" M Inlet. In conjunction with a spray gun and Suttner foam injector, allows cleaning agents or disinfectants to be applied evenly over a large surface. Stainless steel construction

Features
• Thick foam is produced when air flows through vented injector housing and mixes with water and chemical stream
• Wet foam allows more efficient use of chemical
• More durable than conventional foamers

Specifications
• Air Injector Nozzle Size: 3.2 mm (Red)
• Max Pressure: 3,625 PSI
• Length: 23.5”
• Max Temp: 176° F.
• Inlet: 1/4" Male
• Note: Suttner ST-160, ST-160M or St-164 Chemical or Foam injector required and is not included
• Weight: 1.95 lb

Please use Nozzle Chart to determine proper Spray Nozzle Size

Nozzle Chart

Use Spray Nozzle Size and Foam Lance Chart to determine correct Air Injector Nozzle Size to use

Foam Lance Chart

Suttner ST-72 Stainless Steel 23.5” Vented Grip Foam Lance with #3.0 mm (Blue) Air Injector Nozzle and 1/4" M Inlet. In conjunction with a spray gun and Suttner foam injector, allows cleaning agents or disinfectants to be applied evenly over a large surface. Stainless steel construction

Features
• Thick foam is produced when air flows through vented injector housing and mixes with water and chemical stream
• Wet foam allows more efficient use of chemical
• More durable than conventional foamers

Specifications
• Air Injector Nozzle Size: 3.0 mm (Blue)
• Max Pressure: 3,625 PSI
• Length: 23.5”
• Max Temp: 176° F.
• Inlet: 1/4" Male
• Note: Suttner ST-160, ST-160M or St-164 Chemical or Foam injector required and is not included
• Weight: 1.95 lb

Please use Nozzle Chart to determine proper Spray Nozzle Size

Nozzle Chart

Use Spray Nozzle Size and Foam Lance Chart to determine correct Air Injector Nozzle Size to use

Foam Lance Chart

Suttner ST-72 Stainless Steel 23.5” Vented Grip Foam Lance with #2.3 mm (Yellow) Air Injector Nozzle and 1/4" M Inlet. In conjunction with a spray gun and Suttner foam injector, allows cleaning agents or disinfectants to be applied evenly over a large surface. Stainless steel construction

Features
• Thick foam is produced when air flows through vented injector housing and mixes with water and chemical stream
• Wet foam allows more efficient use of chemical
• More durable than conventional foamers

Specifications
• Air Injector Nozzle Size: 2.3 mm (Yellow)
• Max Pressure: 3,625 PSI
• Length: 23.5”
• Max Temp: 176° F.
• Inlet: 1/4" Male
• Note: Suttner ST-160, ST-160M or St-164 Chemical or Foam injector required and is not included
• Weight: 1.95 lb

Please use Nozzle Chart to determine proper Spray Nozzle Size

Nozzle Chart

Use Spray Nozzle Size and Foam Lance Chart to determine correct Air Injector Nozzle Size to use

Foam Lance Chart

Suttner ST-72 Stainless Steel 23.5” Vented Grip Foam Lance with #2.0 mm (Green) Air Injector Nozzle and 1/4" M Inlet. In conjunction with a spray gun and Suttner foam injector, allows cleaning agents or disinfectants to be applied evenly over a large surface. Stainless steel construction

Features
• Thick foam is produced when air flows through vented injector housing and mixes with water and chemical stream
• Wet foam allows more efficient use of chemical
• More durable than conventional foamers

Specifications
• Air Injector Nozzle Size: 2.0 mm (Green)
• Max Pressure: 3,625 PSI
• Length: 23.5”
• Max Temp: 176° F.
• Inlet: 1/4" Male
• Note: Suttner ST-160, ST-160M or St-164 Chemical or Foam injector required and is not included
• Weight: 1.95 lb

Please use Nozzle Chart to determine proper Spray Nozzle Size

Nozzle Chart

Use Spray Nozzle Size and Foam Lance Chart to determine correct Air Injector Nozzle Size to use

Foam Lance Chart

Suttner ST-7.1 Pressure Switch, 580 Switching Point (Black), 1/4" M 4,350 PSI

Features:
• IP 65 protection class
• Simultaneous N/O and N/C connection is possible
• The design of the micro switch allows comparably high inrush current (20 Amps N/C, 15 Amps N/O)
• The electrical capacity of the switch is 10.1 Amps (resistive load)
• No ingress of towing water into the environment of the microswitch possible

Suttner ST-7.1 Data Sheet

Specifications:
• Switch Point: 580 PSI (Black)
• Max. Pressure: 4,350 PS
• Voltage: 10.1 A - 250 VAC
• Max: Fluid Temperature: 194° F
• Cable Length: 37.4”
• Thread: 1/4” Male
• Material: Brass / plastic
• Protection Class” IP 65
• Weight: 0.65 lbs

Suttner ST-7.1 Pressure Switch, 360 Switching Point (Red), 1/4" M 4,350 PSI

Features:
• IP 65 protection class
• Simultaneous N/O and N/C connection is possible
• The design of the micro switch allows comparably high inrush current (20 Amps N/C, 15 Amps N/O)
• The electrical capacity of the switch is 10.1 Amps (resistive load)
• No ingress of towing water into the environment of the microswitch possible

Suttner ST-7.1 Data Sheet

Specifications:
• Switch Point: 360 PSI (Red)
• Max. Pressure: 4,350 PS
• Voltage: 10.1 A - 250 VAC
• Max: Fluid Temperature: 194° F
• Cable Length: 37.4”
• Thread: 1/4” Male
• Material: Brass / plastic
• Protection Class” IP 65
• Weight: 0.65 lbs

Features:
• Can be mounted horizontal or vertical
• Micro-switch replaces reed switch for better reliability and water protection
• Easy to install
• Resistant against shock and vibration
• IP 65 rated-water and dust proof
• Can be wired normally open or normally closed

Specifications:
• Switch Point: 1.2 GPM
• Max. Pressure: 5,000 PS
• Max. Flow Rate: 12 GPM
• Max Voltage: 250 V
• Max Current: 10.1 Amps
• Max: Fluid Temperature: 176° F
• Cable Length: 47.0”
• Inlet & Outlet: 3/8” FNPT
• Weight: 0.80 lbs

Features:
• Can be mounted horizontal or vertical
• Micro-switch replaces reed switch for better reliability and water protection
• Easy to install
• Resistant against shock and vibration
• IP 65 rated-water and dust proof
• Can be wired normally open or normally closed

Specifications:
• Switch Point: 0.3 GPM
• Max. Pressure: 5,000 PS
• Max. Flow Rate: 12 GPM
• Max Voltage: 250 V
• Max Current: 10.1 Amps
• Max: Fluid Temperature: 176° F
• Cable Length: 47.0”
• Inlet & Outlet: 3/8” FNPT
• Weight: 0.80 lbs

Features:
• Simply turn the knob to the desired side and setting on the easy to read legend plate
• Industry standard for panel mount chemical metering valves
• Volume flow is adjustable from 0 up to .27 GPM

Specifications:
• Draw Rate: 0 - 10%
• Flow Rate: 0.27 GPM
• Max Temperature: 140° F
• Weight: 0.16 lbs

Features:
• Designed to introduce detergents into the water system upstream from the pump at high pressure
• The "on-off" plunger is then used to control the injection
• Easily connects to inlet of pump at garden hose connection
• Adjustable chemical flow
• Chemical strainer and 4’ PVC tubing included
• Choose size based on flow rate of your pressure washer

See the ST-64 in action on YouTube

Specifications:
• Size: 4.0 to 7.0 GPM flow rate
• Max Temperature: 140° F
• Inlet: 3/4" FGH (female garden hose)
• Outlet: 3/4" MGH (male garden hose)
• Optional ST-61 chemical metering valve adjusts from off to full flow
• Weight: 0.78 lb

Features:
• Designed to introduce detergents into the water system upstream from the pump at high pressure
• The "on-off" plunger is then used to control the injection
• Easily connects to inlet of pump at garden hose connection
• Adjustable chemical flow
• Chemical strainer and 4’ PVC tubing included
• Choose size based on flow rate of your pressure washer

See the ST-64 in action on YouTube

Specifications:
• Size: 4.0 to 7.0 GPM flow rate
• Max Temperature: 140° F
• Inlet: 1/2" Female NPT
• Outlet: 1/2" Male NPT
• Optional ST-61 chemical metering valve adjusts from off to full flow
• Weight: 0.80 lb

Features:
• Designed to introduce detergents into the water system upstream from the pump at high pressure
• The "on-off" plunger is then used to control the injection
• Easily connects to inlet of pump at garden hose connection
• Adjustable chemical flow
• Chemical strainer and 4’ PVC tubing included
• Choose size based on flow rate of your pressure washer

See the ST-64 in action on YouTube

Specifications:
• Size: 1.5 to 4.0 GPM flow rate
• Max Temperature: 140° F
• Inlet: 3/4" FGH (female garden hose)
• Outlet: 3/4" MGH (male garden hose)
• Optional ST-61 chemical metering valve adjusts from off to full flow
• Weight: 0.78 lb

Features:
• Designed to introduce detergents into the water system upstream from the pump at high pressure
• The "on-off" plunger is then used to control the injection
• Easily connects to inlet of pump at garden hose connection
• Adjustable chemical flow
• Chemical strainer and 4’ PVC tubing included
• Choose size based on flow rate of your pressure washer

See the ST-64 in action on YouTube

Specifications:
• Size: 1.5 to 4.0 GPM flow rate
• Max Temperature: 140° F
• Inlet: 1/2" Female NPT
• Outlet: 1/2" Male NPT
• Optional ST-61 chemical metering valve adjusts from off to full flow
• Weight: 0.80 lb

Features:
• Draw Rate:0 - 11%
• Connects to chemical inlet barb without any special tools needed
• Made of glass filled poly-material, extremely corrosive resistant

Specifications:
• Flow Rate: 0.27 GPM
• Max Temperature: 140° F
• Weight: 0.06 lbs

Suttner ST-60F Brass Injector, Up to 6.5 Orifice, 3/8" M x 3/8" F. The ST-60F is a downstream chemical injector that relies on a pressure drop that is created by using a larger orifice spray nozzle

Features
• Siphon rate approximately 10:1
• Stainless steel spring and ball
• Fixed flow rate for accuracy
• Forged brass housing

Specifications
• Orifice Size: Up to 6.5
• Injector Size: 1.8 mm
• Max Pressure: 3,600 PSI
• Max Temp: 140° F.
• Inlet: 3/8” Male NPT
• Outlet: 3/8” Female NPT
• Hose Barb: 1/4” ID hose
• Weight: 0.20 lb

Suttner ST-60F Brass Injector, Up to 5.0 Orifice, 3/8" M x 3/8" F. The ST-60F is a downstream chemical injector that relies on a pressure drop that is created by using a larger orifice spray nozzle

Features
• Siphon rate approximately 10:1
• Stainless steel spring and ball
• Fixed flow rate for accuracy
• Forged brass housing

Specifications
• Orifice Size: Up to 5
• Injector Size: 1.6 mm
• Max Pressure: 3,600 PSI
• Max Temp: 140° F.
• Inlet: 3/8” Male NPT
• Outlet: 3/8” Female NPT
• Hose Barb: 1/4” ID hose
• Weight: 0.20 lb

Suttner ST-601C Inline Chemical Resistant Spray Gun 4,000 PSI with Ceramic Ball. Ideal for cleaning vertical and overhead surfaces. Perfect for washing tractors, trailers, siding, windows, eaves, etc.

Features
• High Quality, German engineered components
• Superior Chemical Resistant
• Horizontal flow-through design
• Heavy duty, impact-resistant trigger guard
• Forged brass housing for maximum strength
• Unitized valve allows for higher temps and longer life
• Ceramic ball in valve is highly resistant against nearly all soaps and acids

Specifications
• Max Pressure: 4,000 PSI
• Max Flow: 12.0 GPM
• Max Temp: 300° F.
• Inlet: 3/8" Female NPT
• Outlet: 1/4" Female NPT
• Weight: 1.16 lb

Features
• High Quality, German engineered components
• Horizontal flow-through design
• Forged brass housing for maximum strength
• Unitized valve for easy repair
• Stainless steel spring, needle, ball, and seat for chemical resistance
• Special heat and chemical resistant seals for optimum performance even in the harshest of environments

Specifications
• Max Pressure: 4,000 PSI
• Max Flow: 12.0 GPM
• Max Temp: 320° F.
• Inlet: 3/8" Female NPT
• Outlet: 1/4" Female NPT
• Weight: 1.16 lb

Suttner ST-6 Any Position Flow Switch. Mounts in any position and spring assisted brass magnet configuration

Features:
• Can be mounted horizontal or vertical
• Reed switch encased in protective vacuum sealed glass tube eliminating exposure to corrosive cleaning chemicals
• Mounts further downstream in pumping system than traditional vacuum switches, thereby minimizing potential leak points that can cause vacuum switches to close
• Easy reed switch replacement
• Most proven and reliable flow switches in the industry

Specifications:
• Max. Pressure: 5,070 PSI
• Min. Pressure: 75 PSI
• Max. Flow Rate: 8.0 GPM
• Min. Flow Rate: 1 GPM
• Contact: 1 A - 250 V
• Max: Fluid Temperature: 176° F
• Cable Length: 47.0”
• Inlet & Outlet: 3/8” MPT
• Housing: Brass
• Replaces 200006540
• Weight: 0.80 lbs

Suttner ST-58 Change Over Valve 5,000 PSI 1/4" FPT. Suttner ST58 change-over design allows you to switch between lances and nozzles with a twist

Features
• Stainless steel
• No roll over nozzle
• Corrosive resistant

Specifications
• Max Pressure: 5,000 PSI
• Max Temp: 200° F.
• Inlet: 1/4" Female NPT
• Outlets (2): 1/4" Female NPT
• Weight: 0.85 lbs

Features
• High Quality, German engineered components
• Simply turn over the complete assembly or swivel lance and you have access to two different nozzles
• Water sprays through one nozzle port at a time since a stainless steel ball covers the opposite port
• Nozzle housing is made of an impact resistant plastic, manufactured of corrosion resistant material
• Spray depends on 2 nozzles used

Specifications
• Max Pressure: 3,600 PSI
• Max Flow: 8 GPM
• Max Temp: 300° F.
• Inlet: 1/4" Female NPT
• Outlets (2): 1/4" Female NPT
• Note: 1/4” MPT Nozzles not included
• Weight: 0.51 lb

Suttner ST-559 Stainless Steel Turbo / Rotating #6.0 Nozzle. This Suttner rotating nozzle with Tungsten Carbide Nozzle & Seat is rated up to 8,700 PSI. The increased tearing action of the rotating spray is ideal for hard surface applications, such as concrete graffiti cleaning or caked mud on heavy equipment

Features
• Increases cleaning efficiency as much as 200%
• The 0° rotation creates a cleaning and tearing action
• Ideal for hard surfaces
• Tungsten Carbide nozzle and sealing seat
• Improved materials for longer life

Specifications
• Nozzle Size # 6.0
• Max PSI: 8,700
• Max Temp.: 190° F
• Inlet: 1/4" Female NPT
• NOTE: All rotating nozzles should be started pointing downward
• Weight: 1.32 lbs

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

Suttner ST-559 Stainless Steel Turbo / Rotating #5.0 Nozzle. This Suttner rotating nozzle with Tungsten Carbide Nozzle & Seat is rated up to 8,700 PSI. The increased tearing action of the rotating spray is ideal for hard surface applications, such as concrete graffiti cleaning or caked mud on heavy equipment

Features
• Increases cleaning efficiency as much as 200%
• The 0° rotation creates a cleaning and tearing action
• Ideal for hard surfaces
• Tungsten Carbide nozzle and sealing seat
• Improved materials for longer life

Specifications
• Nozzle Size # 5.0
• Max PSI: 8,700
• Max Temp.: 190° F
• Inlet: 1/4" Female NPT
• NOTE: All rotating nozzles should be started pointing downward
• Weight: 1.32 lbs

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

Suttner ST-559 Stainless Steel Turbo / Rotating #4.0 Nozzle. This Suttner rotating nozzle with Tungsten Carbide Nozzle & Seat is rated up to 8,700 PSI. The increased tearing action of the rotating spray is ideal for hard surface applications, such as concrete graffiti cleaning or caked mud on heavy equipment

Features
• Increases cleaning efficiency as much as 200%
• The 0° rotation creates a cleaning and tearing action
• Ideal for hard surfaces
• Tungsten Carbide nozzle and sealing seat
• Improved materials for longer life

Specifications
• Nozzle Size # 4.0
• Max PSI: 8,700
• Max Temp.: 190° F
• Inlet: 1/4" Female NPT
• NOTE: All rotating nozzles should be started pointing downward
• Weight: 1.32 lbs

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

Suttner ST-559 Stainless Steel Turbo / Rotating #3.0 Nozzle. This Suttner rotating nozzle with Tungsten Carbide Nozzle & Seat is rated up to 8,700 PSI. The increased tearing action of the rotating spray is ideal for hard surface applications, such as concrete graffiti cleaning or caked mud on heavy equipment

Features
• Increases cleaning efficiency as much as 200%
• The 0° rotation creates a cleaning and tearing action
• Ideal for hard surfaces
• Tungsten Carbide nozzle and sealing seat
• Improved materials for longer life

Specifications
• Nozzle Size # 3.0
• Max PSI: 8,700
• Max Temp.: 190° F
• Inlet: 1/4" Female NPT
• NOTE: All rotating nozzles should be started pointing downward
• Weight: 1.32 lbs

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

Suttner ST-559 Stainless Steel Turbo / Rotating #2.0 Nozzle. This Suttner rotating nozzle with Tungsten Carbide Nozzle & Seat is rated up to 8,700 PSI. The increased tearing action of the rotating spray is ideal for hard surface applications, such as concrete graffiti cleaning or caked mud on heavy equipment

Features
• Increases cleaning efficiency as much as 200%
• The 0° rotation creates a cleaning and tearing action
• Ideal for hard surfaces
• Tungsten Carbide nozzle and sealing seat
• Improved materials for longer life

Specifications
• Nozzle Size # 2.0
• Max PSI: 8,700
• Max Temp.: 190° F
• Inlet: 1/4" Female NPT
• NOTE: All rotating nozzles should be started pointing downward
• Weight: 1.32 lbs

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

Suttner ST-555 Professional Sandblaster #7.5 Stainless Steel with Adjustable Sand Flow. Removes coatings from almost any surface. Ideal for cleaning of machines, technical facilities, facades and masonry. Thanks to its stainless steel body, the ST-555 features utmost pressure resistance up to a continuous operating pressure of 7,250 PSI. The three symmetrical high-pressure nozzles in the blasting head provide for a flow of the blasting agent without any deflections. This is how wear of the ceramic diffuser nozzle with TPE coating is reduced to a minimum and pulse energy of the blasting agent is used optimally

FEATURES:
• High Quality, German engineered components
• The Sandblaster ST-555 has stainless steel construction 
• The sandblaster is suitable for dust-free blasting of solids with a grain size ranging from 0.4 to 0.8 mm
• With suction quantity control at the double suction pipe
• Sand blasting nozzle made of high-performance ceramics
• Inclusive: 3 hardened stainless steel nozzles

Multiple mediums can be used:
• Glass beads for cleaning of copper and bronze as well as polishing of stainless steel
• Glass powder for cleaning of stainless steel and natural stone or for removal of graffiti from light surfaces
• Slag (fine) for cleaning of sandstone or brick as well as removal of graffiti from dark surfaces
• Slag (coarse) removal of rust from metals or of old coatings and paintings. cleaning and grinding of concrete surfaces
• Sodium carbonate (water-soluble) cleaning of sensitive surfaces such as aluminum, glass, plastics, stainless steel
• Mineral blasting agent (sand) removal of rust from metals or of old coatings and paintings. Cleaning and grinding of concrete surfaces. Varnish removal

ST-555 Sandblaster on YouTube

SPECIFICATIONS:
• Nozzle Size: # 7.5
• Min Flow Rate: 3.0 GPM
• Max Flow Rate: 7.5 GPM
• Max Pressure: 7,250 PSI
• Max Temp: 212° F
• Hose Length: 13'
• Inlet: Male M22, Yoke/Stem: 14MM
• Weight: 4.92 lbs

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

Suttner ST-555 Professional Sandblaster #6.5 Stainless Steel with Adjustable Sand Flow. Removes coatings from almost any surface. Ideal for cleaning of machines, technical facilities, facades and masonry. Thanks to its stainless steel body, the ST-555 features utmost pressure resistance up to a continuous operating pressure of 7,250 PSI. The three symmetrical high-pressure nozzles in the blasting head provide for a flow of the blasting agent without any deflections. This is how wear of the ceramic diffuser nozzle with TPE coating is reduced to a minimum and pulse energy of the blasting agent is used optimally

FEATURES:
• High Quality, German engineered components
• The Sandblaster ST-555 has stainless steel construction 
• The sandblaster is suitable for dust-free blasting of solids with a grain size ranging from 0.4 to 0.8 mm
• With suction quantity control at the double suction pipe
• Sand blasting nozzle made of high-performance ceramics
• Inclusive: 3 hardened stainless steel nozzles

Multiple mediums can be used:
• Glass beads for cleaning of copper and bronze as well as polishing of stainless steel
• Glass powder for cleaning of stainless steel and natural stone or for removal of graffiti from light surfaces
• Slag (fine) for cleaning of sandstone or brick as well as removal of graffiti from dark surfaces
• Slag (coarse) removal of rust from metals or of old coatings and paintings. cleaning and grinding of concrete surfaces
• Sodium carbonate (water-soluble) cleaning of sensitive surfaces such as aluminum, glass, plastics, stainless steel
• Mineral blasting agent (sand) removal of rust from metals or of old coatings and paintings. Cleaning and grinding of concrete surfaces. Varnish removal

ST-555 Sandblaster on YouTube

SPECIFICATIONS:
• Nozzle Size: # 6.5
• Min Flow Rate: 3.0 GPM
• Max Flow Rate: 7.5 GPM
• Max Pressure: 7,250 PSI
• Max Temp: 212° F
• Hose Length: 13'
• Inlet: Male M22, Yoke/Stem: 14MM
• Weight: 4.92 lbs

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

Suttner ST-555 Professional Sandblaster #5.5 Stainless Steel with Adjustable Sand Flow. Removes coatings from almost any surface. Ideal for cleaning of machines, technical facilities, facades and masonry. Thanks to its stainless steel body, the ST-555 features utmost pressure resistance up to a continuous operating pressure of 7,250 PSI. The three symmetrical high-pressure nozzles in the blasting head provide for a flow of the blasting agent without any deflections. This is how wear of the ceramic diffuser nozzle with TPE coating is reduced to a minimum and pulse energy of the blasting agent is used optimally

FEATURES:
• High Quality, German engineered components
• The Sandblaster ST-555 has stainless steel construction 
• The sandblaster is suitable for dust-free blasting of solids with a grain size ranging from 0.4 to 0.8 mm
• With suction quantity control at the double suction pipe
• Sand blasting nozzle made of high-performance ceramics
• Inclusive: 3 hardened stainless steel nozzles

Multiple mediums can be used:
• Glass beads for cleaning of copper and bronze as well as polishing of stainless steel
• Glass powder for cleaning of stainless steel and natural stone or for removal of graffiti from light surfaces
• Slag (fine) for cleaning of sandstone or brick as well as removal of graffiti from dark surfaces
• Slag (coarse) removal of rust from metals or of old coatings and paintings. cleaning and grinding of concrete surfaces
• Sodium carbonate (water-soluble) cleaning of sensitive surfaces such as aluminum, glass, plastics, stainless steel
• Mineral blasting agent (sand) removal of rust from metals or of old coatings and paintings. Cleaning and grinding of concrete surfaces. Varnish removal

ST-555 Sandblaster on YouTube

SPECIFICATIONS:
• Nozzle Size: # 5.5
• Min Flow Rate: 3.0 GPM
• Max Flow Rate: 7.5 GPM
• Max Pressure: 7,250 PSI
• Max Temp: 212° F
• Hose Length: 13'
• Inlet: Male M22, Yoke/Stem: 14MM
• Weight: 4.92 lbs

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

Suttner ST-555 Professional Sandblaster #4.0 Stainless Steel with Adjustable Sand Flow. Removes coatings from almost any surface. Ideal for cleaning of machines, technical facilities, facades and masonry. Thanks to its stainless steel body, the ST-555 features utmost pressure resistance up to a continuous operating pressure of 7,250 PSI. The three symmetrical high-pressure nozzles in the blasting head provide for a flow of the blasting agent without any deflections. This is how wear of the ceramic diffuser nozzle with TPE coating is reduced to a minimum and pulse energy of the blasting agent is used optimally

FEATURES:
• High Quality, German engineered components
• The Sandblaster ST-555 has stainless steel construction 
• The sandblaster is suitable for dust-free blasting of solids with a grain size ranging from 0.4 to 0.8 mm
• With suction quantity control at the double suction pipe
• Sand blasting nozzle made of high-performance ceramics
• Inclusive: 3 hardened stainless steel nozzles

Multiple mediums can be used:
• Glass beads for cleaning of copper and bronze as well as polishing of stainless steel
• Glass powder for cleaning of stainless steel and natural stone or for removal of graffiti from light surfaces
• Slag (fine) for cleaning of sandstone or brick as well as removal of graffiti from dark surfaces
• Slag (coarse) removal of rust from metals or of old coatings and paintings. cleaning and grinding of concrete surfaces
• Sodium carbonate (water-soluble) cleaning of sensitive surfaces such as aluminum, glass, plastics, stainless steel
• Mineral blasting agent (sand) removal of rust from metals or of old coatings and paintings. Cleaning and grinding of concrete surfaces. Varnish removal

ST-555 Sandblaster on YouTube

SPECIFICATIONS:
• Nozzle Size: # 4.0
• Min Flow Rate: 3.0 GPM
• Max Flow Rate: 7.5 GPM
• Max Pressure: 7,250 PSI
• Max Temp: 212° F
• Hose Length: 13'
• Inlet: Male M22, Yoke/Stem: 14MM
• Weight: 4.92 lbs

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

Suttner ST-555 Professional Sandblaster #3.0 Stainless Steel with Adjustable Sand Flow. Removes coatings from almost any surface. Ideal for cleaning of machines, technical facilities, facades and masonry. Thanks to its stainless steel body, the ST-555 features utmost pressure resistance up to a continuous operating pressure of 7,250 PSI. The three symmetrical high-pressure nozzles in the blasting head provide for a flow of the blasting agent without any deflections. This is how wear of the ceramic diffuser nozzle with TPE coating is reduced to a minimum and pulse energy of the blasting agent is used optimally

FEATURES:
• High Quality, German engineered components
• The Sandblaster ST-555 has stainless steel construction 
• The sandblaster is suitable for dust-free blasting of solids with a grain size ranging from 0.4 to 0.8 mm
• With suction quantity control at the double suction pipe
• Sand blasting nozzle made of high-performance ceramics
• Inclusive: 3 hardened stainless steel nozzles

Multiple mediums can be used:
• Glass beads for cleaning of copper and bronze as well as polishing of stainless steel
• Glass powder for cleaning of stainless steel and natural stone or for removal of graffiti from light surfaces
• Slag (fine) for cleaning of sandstone or brick as well as removal of graffiti from dark surfaces
• Slag (coarse) removal of rust from metals or of old coatings and paintings. cleaning and grinding of concrete surfaces
• Sodium carbonate (water-soluble) cleaning of sensitive surfaces such as aluminum, glass, plastics, stainless steel
• Mineral blasting agent (sand) removal of rust from metals or of old coatings and paintings. Cleaning and grinding of concrete surfaces. Varnish removal

ST-555 Sandblaster on YouTube

SPECIFICATIONS:
• Nozzle Size: # 3.0
• Min Flow Rate: 3.0 GPM
• Max Flow Rate: 7.5 GPM
• Max Pressure: 7,250 PSI
• Max Temp: 212° F
• Hose Length: 13'
• Inlet: Male M22, Yoke/Stem: 14MM
• Weight: 4.92 lbs

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

Features:
• Pedal and valve are in protective housing
• Inlet and outlet are positioned to help keep hose out of the way
• Stainless steel construction for durability and stability
• Can be used in other applications

Specifications:
• Inlet: 1/4” FPT
• Outlet: 1/4” FPT
• Maximum Pressure: 7,300 PSI
• Max. Flow Rate: 21.0 GPM
• Max. Temp.: 300º F.
• Weight: 9.85 lbs.

Suttner ST-55 Sandblasting Kit #8.0 with Adjustable Sand Flow Valve. Removes coatings from almost any surface. Designed for sandblasting a variety of surfaces and capable of removing most coatings down to white metal. Graffiti clean up, paint

FEATURES:
• High Quality, German engineered components
• Adjustable sand volume valve
• Works on venturi principle
• Silver steel sand nozzle
• Use silica sand for best results
• 13 ft hose
• Grain Size 0.2 mm - 0.8 mm

SPECIFICATIONS:
• Nozzle Size: # 8.0
• Max Pressure: 3,500 PSI
• Min Flow Rate: 2 GPM
• Max Flow Rate: 8 GPM
• Max Temp: 194° F
• Sand Consumption: Max 750 lbs per hour
• Inlet: 1/4"Male NPT
• Weight: 4.92 lbs

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

Suttner ST-55 Sandblasting Kit #7.0 with Adjustable Sand Flow Valve. Removes coatings from almost any surface. Designed for sandblasting a variety of surfaces and capable of removing most coatings down to white metal. Graffiti clean up, paint

FEATURES:
• High Quality, German engineered components
• Adjustable sand volume valve
• Works on venturi principle
• Silver steel sand nozzle
• Use silica sand for best results
• 13 ft hose
• Grain Size 0.2 mm - 0.8 mm

SPECIFICATIONS:
• Nozzle Size: # 7.0
• Max Pressure: 3,500 PSI
• Min Flow Rate: 2 GPM
• Max Flow Rate: 8 GPM
• Max Temp: 194° F
• Sand Consumption: Max 750 lbs per hour
• Inlet: 1/4"Male NPT
• Weight: 4.92 lbs

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

Suttner ST-55 Sandblasting Kit #6.0 with Adjustable Sand Flow Valve. Removes coatings from almost any surface. Designed for sandblasting a variety of surfaces and capable of removing most coatings down to white metal. Graffiti clean up, paint

FEATURES:
• High Quality, German engineered components
• Adjustable sand volume valve
• Works on venturi principle
• Silver steel sand nozzle
• Use silica sand for best results
• 13 ft hose
• Grain Size 0.2 mm - 0.8 mm

SPECIFICATIONS:
• Nozzle Size: # 6.0
• Max Pressure: 3,500 PSI
• Min Flow Rate: 2 GPM
• Max Flow Rate: 8 GPM
• Max Temp: 194° F
• Sand Consumption: Max 750 lbs per hour
• Inlet: 1/4"Male NPT
• Weight: 4.92 lbs

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

Suttner ST-55 Sandblasting Kit #5.0 with Adjustable Sand Flow Valve. Removes coatings from almost any surface. Designed for sandblasting a variety of surfaces and capable of removing most coatings down to white metal. Graffiti clean up, paint

FEATURES:
• High Quality, German engineered components
• Adjustable sand volume valve
• Works on venturi principle
• Silver steel sand nozzle
• Use silica sand for best results
• 13 ft hose
• Grain Size 0.2 mm - 0.8 mm

SPECIFICATIONS:
• Nozzle Size: # 5.0
• Max Pressure: 3,500 PSI
• Min Flow Rate: 2 GPM
• Max Flow Rate: 8 GPM
• Max Temp: 194° F
• Sand Consumption: Max 750 lbs per hour
• Inlet: 1/4"Male NPT
• Weight: 4.92 lbs

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

Suttner ST-55 Sandblasting Kit #4.0 with Adjustable Sand Flow Valve. Removes coatings from almost any surface. Designed for sandblasting a variety of surfaces and capable of removing most coatings down to white metal. Graffiti clean up, paint

FEATURES:
• High Quality, German engineered components
• Adjustable sand volume valve
• Works on venturi principle
• Silver steel sand nozzle
• Use silica sand for best results
• 13 ft hose
• Grain Size 0.2 mm - 0.8 mm

SPECIFICATIONS:
• Nozzle Size: # 4.0
• Max Pressure: 3,500 PSI
• Min Flow Rate: 2 GPM
• Max Flow Rate: 8 GPM
• Max Temp: 194° F
• Sand Consumption: Max 750 lbs per hour
• Inlet: 1/4"Male NPT
• Weight: 4.92 lbs

Please use Nozzle Chart to determine proper nozzle size