General Pump

General EPHT18132S Triplex EPHT Series 1,750 RPM Solid Shaft Plunger Pump with High-temp Seals.

Features:
• Features patented “high tech” packings:
    -dynamic low-pressure seal retainer
    -superior low-pressure seal
    -innovative intermediate ring
    -superior high-pressure seal
• Nickel-plated manifold
• New forged brass manifold , increases working pressure to 4,000 PSI
• New plunger guide bushing (patent pending)
• Solid ceramic plungers with dual guide system
• New dual diameter plunger guide
• New optimized outlet valves
• New dual lip oil seal

Specifications Sheet

Specifications:
• Solid Shaft for Belt or Gear Drive
• Max. Volume: 3.4 GPM
• Max. Discharge Pressure: 2,465 PSI
• Horsepower: 5.7 EBHP
• Max. Pump Speed: 1,750 RPM
• Oil Capacity: 14 oz
• Max. Fluid Temp.: 185 degrees F.
• Inlet Port Thread: 1/2”-14 BSP-F
• Discharge Port Thread: 3/8”-19 BSP-F
• Shaft Diameter: .945 in./24 mm
• Dimensions – Nominal: 9.5” x 8.38” x 5.1”
• Rail kit part # ZFEETEVO
• Replaces HTXS1813S
• Weight: 18.0 lb.

General T1631 Sixplex Plunger Pump.

Features:
• Forged brass manifold with an exclusive lifetime warranty
• Hi flow applications
• Dual manifolds utilizing a common crankcase for efficient performance
• Solid ceramic plungers with continuously lubricated packings
• Unitized stainless steel inlet and discharge valves

Specifications Sheet

WARNING: High Pressure Systems require a primary pressure regulating device (i.e. regulator, unloader) and a secondary pressure relief device (i.e. pop-off valve, relief valve). Failure to install such relief devices properly could result in personal injury or damage to pump or property. GP and PRI Industries do not assume any liability or responsibility for the operation of the user’s high pressure system.

Specifications:
• Pump: Sixplex Plunger
• Max. Volume: 10.0 GPM
• Max. Discharge Pressure: 2,500 PSI
• Max. Pump Speed: 1,080 RPM
• Shaft Diameter: 32mm Solid
• Max. Horsepower Requirements: 17.1 EBHP
• Max. Fluid Temp.: 165 degrees F.
• Inlet Ports (2): 3/4” BSP-F
• Discharge Ports (2): 3/8” BSP-F
• Maximum Inlet Pressure: 125 PSI
• Maximum Inlet Vacuum: 9 ft. water (7.9 in. Hg)
• Oil Capacity: 54.0 oz.
• Dimensions: 16.1” x 11.2” x 7.9”
• Weight: 61.0 lb.

General Pump YG26LA34 Wash Down Gun/Lance Assembly 21 GPM 2,600 PSI

Features:
• Minimizes fatigue for the operator
• Ergonomic design
• 34 inch lance
• Shock resistant plastic housing
• Stainless Steel seat and ball
• Internal construction of brass and Stainless Steel

Specifications Sheet

Specifications:
• Maximum Volume: 21.0 GPM
• Maximum Discharge Pressure: 2,600 PSI
• Maximum Fluid Temperature: 109° F
• Inlet Port Thread: 1/2” NPT- F
• Ceramic Nozzle: #25 (3 mm)
• Materials: Stainless Steel, Brass, Plastic, Buna-N, Teflon
• Weight: 7.0 lbs

General TSS1511 Triplex Plunger Pump (Left Handed). The preferred pump frame in the pressure cleaning industry

Features:
• Forged brass manifold with an exclusive lifetime warranty
• Large-capacity, die-cast, anodized aluminum oil-bath crankcase
• Over-sized connecting rods for maximum life
• Solid ceramic plungers with continuously lubricated packings
• Unitized stainless steel inlet and discharge valves
• Designed for suction applications
• Manifold with fine thread valve caps

Specifications Sheet

WARNING: High Pressure Systems require a primary pressure regulating device (i.e. regulator, unloader) and a secondary pressure relief device (i.e. pop-off valve, relief valve). Failure to install such relief devices properly could result in personal injury or damage to pump or property. GP and PRI Industries do not assume any liability or responsibility for the operation of the user’s high pressure system.

Specifications:
• Triplex Plunger Pump
• Solid Shaft for Belt or Gear Drive
• Max. Volume: 4.0 GPM
• Max. Discharge Pressure: 3,500 PSI
• Max. Pump Speed: 1450 RPM
• Shaft Diameter: 24mm Solid
• Max. Horsepower Requirements: 13.0 GHP
• Max. Fluid Temp.: 165 degrees F.
• Inlet Ports (2): 1/2" BSP
• Discharge Ports (2): 3/8" BSP
• Drive Side: Left
• Forged brass head & valve covers
• Solid ceramic plungers
• Note: Item for sale is PUMP ONLY as shown in picture and does not include unloader which is required for proper operation
• Weight: 32.0 lb.

General Pump DSW9038SS Stainless Steel Swivel Coupling 3/8"NPT-F 5,000 PSI

Specifications Sheet

Specifications
• Max Pressure: 5,000 PSI
• Max Temp: 250° F.
• Port Size 3/8” NPT-18
• Through Hole: 1/2”
• Material: Stainless Steel, XNBR, Teflon
• Dimensions: 3" x Ø1.6"
• Weight: 17.5 oz

General Pump DSW9012SS Stainless Steel Swivel Coupling 1/2"NPT-F 5,000 PSI

Specifications Sheet

Specifications
• Max Pressure: 5,000 PSI
• Max Temp: 250° F.
• Port Size 1/2” NPT-14
• Through Hole: 1/2”
• Material: Stainless Steel, XNBR, Teflon
• Dimensions: 3" x Ø1.6"
• Weight: 17.5 oz

General Pump 103073 Assembly, Pilot Valve

General Pump 100995 Capillary Style 70° - 250° Adjustable Thermostat 6,000 PSI. Probe Style Thermostats, Insulated SS Capilary Copper Immersion Bulb (UL/CSA Approved), 25 Amp, 250V Electric Rating

Features:
• Available either for temperature regulation or over-temperature protection
• Precise temperature control with fast reaction time
• 6,000 PSI
• Trip free manual reset

Specifications Sheet

Specifications:
• Temp Range: 70°- 250º F
• Max. Pressure: 6,000 PSI
• Electrical Rating AC: 25A - 250V (UL)
• Material: Bulb and Capillary in Copper
• Capillary Length: 71”
• Connections: Brass fastons
• Weight: 0.50 Lb

GP ZRMAX583 (Black) High Pressure Adjustable Rotating Nozzle 5,800 PSI.

Featuring:
• The ZRMAX is a high pressure, rotating, zero-degree nozzle
• The unique internal design allows aim-and-spray operation, even when cleaning overhead, and permits easy replacement of all wear parts
• Sized according to flow rate, a ZRMAX is perfect for your toughest cleaning tanks

Data & Nozzle Chart Sheet

Specifications:
• Max Pressure: 5,800 PSI
• Max Flow: 6.6 GPM
• Max Temperature: 176º FI
• Inlet Size: 1/4”-19 BSPP-F
• Dimensions; 1.5 O.D. x 4.1 Lg.
• Materials Brass, Plastic, Ceramic, Buna-N
• Size Color: Black
• Weight: 0.75 lb

GP ZRMAX581 (Red) High Pressure Adjustable Rotating Nozzle 5,800 PSI.

Featuring:
• The ZRMAX is a high pressure, rotating, zero-degree nozzle
• The unique internal design allows aim-and-spray operation, even when cleaning overhead, and permits easy replacement of all wear parts
• Sized according to flow rate, a ZRMAX is perfect for your toughest cleaning tanks

Data & Nozzle Chart Sheet

Specifications:
• Max Pressure: 5,800 PSI
• Max Flow: 6.6 GPM
• Max Temperature: 176º FI
• Inlet Size: 1/4”-19 BSPP-F
• Dimensions; 1.5 O.D. x 4.1 Lg.
• Materials Brass, Plastic, Ceramic, Buna-N
• Size Color: Red
• Weight: 0.75 lb

• General 66 Series Triplex Plunger Pump
• Solid Shaft for Belt or Gear Drive
• Max. Volume: 5.5 GPM
• Max. Discharge Pressure: 5,000 PSI
• Max. Pump Speed: 1450 RPM
• Shaft Diameter: 24mm Solid
• Max. Horsepower Requirements: 18.8 EHP
• Max. Fluid Temp.: 165° F
• Inlet Ports (2): 1/2" FPT
• Discharge Ports (2): 3/8" FPT
• Forged brass head has an exclusive lifetime warranty
• Plunger design improves thermal shock resistance
• Drive Side: Left
• Weight: 52.0 lb.

General Pump 2100358 Sewer Jetter Kit for DHRHC50100 Hose Reel. Includes Ball Valve, Pressure Gauge & 3 Sewer Jet Nozzles

Features:
• Clamp the hardware kit to the DHRHC50100 hose reel handle
• Full flow ball valve
• Glycerin filled gauge
• 3 Sewer nozzles included

2100358 Sewer Jetter Kit Data Sheet

SPECIFICATIONS
• Pressure Rating: 5,000 PSI
• Max Temp: 185° F.
• Inlet: 1/4” NPT-F
• Outlet: 1/4” NPT-F
• SJN0301F6B1 Nozzle: #3.0, 1 Front, 6 Rear
• SJN0300F3B1 Nozzle: #3.0, 3 Rear
• SJN0301F3B1 Nozzle: #3.0, 1 Front, 3 Rear
• Shipping Weight 5.35 lbs

General Pump 0° x #3.0 S-Style Spray Nozzle 1/8” NPT-M

Features
• 5,000 PSI operating pressure
• Made in the USA
• General Pump High Pressure Spray Tips feature a two piece design
• Inserts are through hardened and pressed into a 303 stainless steel rust-resistant body for improved durability
• The contour control nozzle chamber eliminates the need for flow straighteners
• Resistant to most chemical
• Laser marked for clarity and durability

Specifications
• Tip Angle: 0°
• Nozzle Size: 3.0
• Operating Pressure: 5,000 PSI
• Connection: 1/8” NPT-M
• Weight: 0.05 oz

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

General Pump ZH1520 Trapped Pressure Unloader Valve 2,465 PSI 52.8 GPM 1” NPT-F

Features
• Suitable for Industrial use
• Provisions for Panel Mounting
• Suitable for Industrial use
• Single bypass port
• Extremely reliable
• Easy maintenance

Specifications Sheet

Specifications
• Max Volume: 52.8 GPM
• Min Volume: 5.28 GPM
• Maximum Operating Pressure: 2,465 PSI
• Maximum Temperature: 185° F
• Inlet Port: 1" NPT-F
• Outlet Port: 1" NPT-F
• Bypass Port: 1" NPT-F
• Dimensions: 8.27” x 5.07” x 1.81”
• VRP175, VRP 175
• Weight: 4.4 Lbs

General Pump ZH168 Trapped Unloader (White) 2,320 PSI 21.1 GPM 1/2” NPT-F

Features
• Suitable for Industrial use
• Dual bypass port
• Extremely reliable
• Easy maintenance

Specifications Sheet

Specifications
• Max Volume: 21.1 GPM
• Maximum Operating Pressure: 2,320 PSI
• Maximum Temperature: 185° F
• Inlet: (2) 1/2" NPT-F
• Outlet: 1/2" NPT-F
• Bypass: 1/2" NPT-F
• Spring Color: White
• Dimensions: 9.15” x 3.69” x 1.81”
• Weight: 2..87 Lbs

General Pump ZH288 Trapped Unloader (Blue/Green) 4,060 PSI 21.1 GPM 1/2” NPT-F

Features
• Suitable for Industrial use
• Dual bypass port
• Extremely reliable
• Easy maintenance

Specifications Sheet

Specifications
• Max Volume: 21.1 GPM
• Maximum Operating Pressure: 4,060 PSI
• Maximum Temperature: 185° F
• Inlet: (2) 1/2" NPT-F
• Outlet: 1/2" NPT-F
• Bypass: 1/2" NPT-F
• Spring Color: Green
• Note: Spring color changed to green late 2022
• Dimensions: 9.15” x 3.69” x 1.81”
• Weight: 2.87 Lbs

General EP1510S34 Triplex EP Series 3,400 RPM Solid Shaft Plunger Pump.

Features:
• Triplex plunger pump
• New Forged brass manifold
• New plunger guide bushing (patent pending)
• Solid ceramic plungers with dual guide system
• New dual diameter plunger guide
• New optimized outlet valves
• New dual lip oil seal

Specifications Sheet

Specifications:
• Solid Shaft for Belt or Gear Drive
• Max. Volume: 4.2 GPM
• Max. Discharge Pressure: 3,045 PSI
• Horsepower: 8.7 HP
• Max. Pump Speed: 3,400 RPM
• Oil Capacity: 15 oz
• Max. Fluid Temp.: 165 degrees F.
• Inlet Port Thread: 1/2”-14 BSP-F
• Discharge Port Thread: 3/8”-19 BSP-F
• Shaft Diameter: .945 in./24 mm
• Dimensions – Nominal: 9.5” x 8.38” x 5.1”
• Replaces TT9441
• Weight: 15.4 lb.

General EP1812S17 Triplex EP Series 1,750 RPM Solid Shaft Plunger Pump.

Features:
• Triplex plunger pump
• New Forged brass manifold
• New plunger guide bushing (patent pending)
• Solid ceramic plungers with dual guide system
• New dual diameter plunger guide
• New optimized outlet valves
• New dual lip oil seal

Specifications Sheet

Specifications:
• Solid Shaft for Belt or Gear Drive
• Max. Volume: 4.0 GPM
• Max. Discharge Pressure: 2,500 PSI
• Horsepower: 6.6 HP
• Max. Pump Speed: 1,750 RPM
• Oil Capacity: 15 oz
• Max. Fluid Temp.: 165 degrees F.
• Inlet Port Thread: 1/2”-14 BSP-F
• Discharge Port Thread: 3/8”-19 BSP-F
• Shaft Diameter: .945 in./24 mm
• Dimensions – Nominal: 9.5” x 8.38” x 5.1”
• Weight: 15.4 lb.

General EP1811S17 Triplex EP Series 1,750 RPM Solid Shaft Plunger Pump.

Features:
• Triplex plunger pump
• New Forged brass manifold
• New plunger guide bushing (patent pending)
• Solid ceramic plungers with dual guide system
• New dual diameter plunger guide
• New optimized outlet valves
• New dual lip oil seal

Specifications Sheet

Specifications:
• Solid Shaft for Belt or Gear Drive
• Max. Volume: 3.7 GPM
• Max. Discharge Pressure: 2,500 PSI
• Horsepower: 6.2 HP
• Max. Pump Speed: 1,750 RPM
• Oil Capacity: 15 oz
• Max. Fluid Temp.: 165 degrees F.
• Inlet Port Thread: 1/2”-14 BSP-F
• Discharge Port Thread: 3/8”-19 BSP-F
• Shaft Diameter: .945 in./24 mm
• Dimensions – Nominal: 9.5” x 8.38” x 5.1”
• Weight: 15.4 lb.

General Pump YCV38FSS Stainless Steel Check Valve 3/8 FPT x 3/8 FPT 6,500 PSI

Features
• Light Cracking Pressure
• Stainless Body with Stainless Wetted Parts
• O-ring on Poppet for a Leak Proof Seal
• Solid Body Construction, Won’t Come Apart During Installation

GP YCVSS Specifications Sheet

Specifications
• Body Material: Stainless Steel
• Max Volume: 10.5 GPM
• Rated Pressure: 5,800 PSI
• Maximum Pressure: 6,500 PSI
• Maximum Temperature: 195° F
• Port Sizes: 3/8" NPT-F
• Cracking Pressure: 5.8 PSI
• Length: 2.13”
• Weight: 3.7 oz

General Pump YCV12FSS Stainless Steel Check Valve 1/2 FPT x 1/2 FPT 6,500 PSI

Features
• Light Cracking Pressure
• Stainless Body with Stainless Wetted Parts
• O-ring on Poppet for a Leak Proof Seal
• Solid Body Construction, Won’t Come Apart During Installation

GP YCVSS Specifications Sheet

Specifications
• Body Material: Stainless Steel
• Max Volume: 21.0 GPM
• Rated Pressure: 5,800 PSI
• Maximum Pressure: 6,500 PSI
• Maximum Temperature: 195° F
• Port Sizes: 1/2" NPT-F
• Cracking Pressure: 4.4 PSI
• Length: 2.6”
• Weight: 6.81 oz

General Pump YCV14FSS Stainless Steel Check Valve 1/4 FPT x 1/4 FPT 6,500 PSI

Features
• Light Cracking Pressure
• Stainless Body with Stainless Wetted Parts
• O-ring on Poppet for a Leak Proof Seal
• Solid Body Construction, Won’t Come Apart During Installation

GP YCVSS Specifications Sheet

Specifications
• Body Material: Stainless Steel
• Max Volume: 6.5 GPM
• Rated Pressure: 5,800 PSI
• Maximum Pressure: 6,500 PSI
• Maximum Temperature: 195° F
• Port Sizes: 1/4" NPT-F
• Cracking Pressure: 5.8 PSI
• Length: 1.85”
• Weight: 1.9 oz

General TSP1621 High Pressure Triplex Plunger Pump 6,525 PSI 4.3 GPM 1,450 RPM

Features:
• Compact, High Pressure
• Oversized roller bearings
• Fully anodized crankcase
• Innovative new seal design extends seal life
• New plunger design improves “thermal shock” resistance
• New valve cap design improves hydrostatic performance

Specifications:
• Triplex Plunger Pump
• Solid Shaft for Belt or Gear Drive
• Max. Volume: 4.3 GPM
• Max. PSI: 6,525
• Max. Pump Speed: 1,450 RPM
• Shaft Diameter: 24mm Solid
• Max. Horsepower Requirements: 19.2 EBHP
• Max. Fluid Temp.: 165° F.
• Inlet Ports (2): 1/2” BSP-F
• Discharge Ports (2): 3/8” BSP-F
• Drive Side: Standard right
• Note: Item for sale is PUMP ONLY as shown in picture and does not include unloader which is required for proper operation
• Weight: 51.8 lb.

General Pump DHRA50450SS 3/8" x 450', 3/4" x 250' Stainless Steel "A" Frame Industrial Hose Reel. Rated 5,000 PSI and up to 250° F. Ideal for use with pressure washers, sewer jetters, lawn & tree sprayers, etc. Can be used as is or can be mounted to portable cart or stacked

FEATURES
• Direct hand-crank rewind with locking pin and folding mechanism
• Heavy duty stainless steel construction
• Full flow stainless steel swivel
• Variable friction brake
• Many available accessories
• Includes one D10032 Fitting 3/4” GH X 1/2 NPT-M

DHRA SS Spec Sheet

SPECIFICATIONS
• Capacity 3/8" Pressure Washer / Sewer Hose: 450’
• Capacity 5/8" Garden Hose: 325’
• Capacity 3/4" Garden Hose: 250’
• Max. PSI: 5,000
• Max Temp: 250° F.
• Inlet: 1/2 NPT-F (Bushing Included, 1/2 NPT-M x 3/8 NPT-F)
• Outlet: 1/2 NPT-F (Bushing Included, 1/2 NPT-M x 3/8 NPT-F)
• Note: Unit pictured is model DHRA50150SS
• Gross Weight 48.0 lbs

General Pump DHRA50300SS 3/8" x 300', 3/4" x 175' Stainless Steel "A" Frame Industrial Hose Reel. Rated 5,000 PSI and up to 250° F. Ideal for use with pressure washers, sewer jetters, lawn & tree sprayers, etc. Can be used as is or can be mounted to portable cart or stacked

FEATURES
• Direct hand-crank rewind with locking pin and folding mechanism
• Heavy duty stainless steel construction
• Full flow stainless steel swivel
• Variable friction brake
• Many available accessories
• Includes one D10032 Fitting 3/4” GH X 1/2 NPT-M

DHRA SS Spec Sheet

SPECIFICATIONS
• Capacity 3/8" Pressure Washer / Sewer Hose: 300’
• Capacity 5/8" Garden Hose: 225’
• Capacity 3/4" Garden Hose: 175’
• Max. PSI: 5,000
• Max Temp: 250° F.
• Inlet: 1/2 NPT-F (Bushing Included, 1/2 NPT-M x 3/8 NPT-F)
• Outlet: 1/2 NPT-F (Bushing Included, 1/2 NPT-M x 3/8 NPT-F)
• Note: Unit pictured is model DHRA50150SS
• Gross Weight 41.97 lbs

General Pump DHRA50150SS 3/8" x 150', 3/4" x 100' Stainless Steel "A" Frame Industrial Hose Reel. Rated 5,000 PSI and up to 250° F. Ideal for use with pressure washers, sewer jetters, lawn & tree sprayers, etc. Can be used as is or can be mounted to portable cart or stacked

FEATURES
• Direct hand-crank rewind with locking pin and folding mechanism
• Heavy duty stainless steel construction
• Full flow stainless steel swivel
• Variable friction brake
• Many available accessories
• Includes one D10032 Fitting 3/4” GH X 1/2 NPT-M

DHRA Spec Sheet

SPECIFICATIONS
• Capacity 3/8" Pressure Washer / Sewer Hose: 150’
• Capacity 5/8" Garden Hose: 125’
• Capacity 3/4" Garden Hose: 100’
• Max. PSI: 5,000
• Max Temp: 250° F.
• Inlet: 1/2 NPT-F (Bushing Included, 1/2 NPT-M x 3/8 NPT-F)
• Outlet: 1/2 NPT-F (Bushing Included, 1/2 NPT-M x 3/8 NPT-F)
• Note: Unit pictured is model DHRA50150SS
• Gross Weight 34.15 lbs

Set of General Pump D80008 Pressure Washer 2-1/2" x 1" Replacement Rubber Feet. Perfect for pressure washer carts and frames

Specifications
• Includes four replacement feet, 2.5” Diameter x 1.0” Thick
• Mounting hardware not included
• Weight: 1.10 lbs

Set of General Pump D80007 Pressure Washer 1-1/4" x 3/4" Replacement Rubber Feet. Perfect for pressure washer carts and frames

Specifications
• Includes four replacement feet
• 1.25” Diameter
• 0.75” Thick
• 1/4” Hole
• 60 Duro EPDM
• Mounting hardware not included
• Weight: 3 oz

General Pump YGR1000P Gear Reducer for 2.2 to 1, 1″ Shafted Engines, Up to 24 HP, J609A Flange, 47, 47SS and 66 Series pumps

Features:
• Compact and lightweight
• Hardened steel helical gears for quiet operation
• Oil bath lubrication
• Dual bearing design for extended life
• J609a Flange mounts to most gasoline engines

Specifications:
• Horse Power: 18 - 24
• Drive Ratio: 2.176:1
• Maximum Pump Speed: 1,450 RPM
• Oil Capacity: 10 Oz
• Oil Grade: SAE90 Gear Lube
• Input (motor) Shaft Ø": 1”
• Output (pump) Shaft Ø": 24 mm
• Motor Flange (SAE): J609A
• Pump Flange: Fits 47, 47SS and 66 Series General Pump
• Weight: 5.8 lb.