Suttner America

3/4” Suttner # 20.0 Warhead / Egg Sewer Cleaning Nozzle. With 1 Front, 6 Rear jets and rated to 7,250 PSI. These are light and agile used as a great all around nozzle with replaceable inserts. They include a forward jet.

Features:
• High Quality, German engineered components
• Best performing and most durable design for higher efficiency
• The egg-type radial nozzle is wear resistant and cost competitive
• Great for sanitary applications
• Hardened stainless steel body and threaded inserts can easily be serviced/replaced for longer life span

Specifications:
• Nozzle Size: # 20.0
• Jets: 1 at 0°
• Jets: 6 at 75°
• Material: Stainless steel
• Maximum Pressure: 7,250 PSI
• Inlet: 3/4” Female
• Outside Diameter (O.D.): 1.97”
• Length: 2.76”
• Weight: 20.0 oz

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

3/4” Suttner # 25.0 Warhead / Egg Radial Sewer Cleaning Nozzle. With 1 Front, 6 Side and 3 Rear jets and rated to 7,250 PSI. The ideal tool for the toughest applications of hard grease and scale that may be encrusted on the interior wall of the pipe

Features:
• High Quality, German engineered components
• Best performing and most durable design for higher efficiency
• These are light and agile used as a great all around nozzle with replaceable inserts. They include a forward jet
• The egg-type radial nozzle is wear resistant and cost competitive
• Great for sanitary applications
• With unrivaled cleaning power on heavy encrusted grease and sludge
• Hardened stainless steel body and replaceable nozzle inserts for longer life

Specifications:
• Nozzle Size: # 25.0
• Jets: 1 at 0°
• Jets: 6 at 75°
• Jets: 3 at 30°
• Material: Stainless steel
• Maximum Pressure: 7,250 PSI
• Inlet: 3/4” Female
• Outside Diameter (O.D.): 1.97”
• Length: 3.94”
• Weight: 48.22 oz

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

3/4” Suttner # 25.0 Warhead / Egg Sewer Cleaning Nozzle. With 1 Front, 6 Rear jets and rated to 7,250 PSI. These are light and agile used as a great all around nozzle with replaceable inserts. They include a forward jet.

Features:
• High Quality, German engineered components
• Best performing and most durable design for higher efficiency
• The egg-type radial nozzle is wear resistant and cost competitive
• Great for sanitary applications
• Hardened stainless steel body and threaded inserts can easily be serviced/replaced for longer life span

Specifications:
• Nozzle Size: # 25.0
• Jets: 1 at 0°
• Jets: 6 at 75°
• Material: Stainless steel
• Maximum Pressure: 7,250 PSI
• Inlet: 3/4” Female
• Outside Diameter (O.D.): 1.97”
• Length: 2.76”
• Weight: 20.0 oz

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

3/4” Suttner # 30.0 Warhead / Egg Radial Sewer Cleaning Nozzle. With 1 Front, 6 Side and 3 Rear jets and rated to 7,250 PSI. The ideal tool for the toughest applications of hard grease and scale that may be encrusted on the interior wall of the pipe

Features:
• High Quality, German engineered components
• Best performing and most durable design for higher efficiency
• These are light and agile used as a great all around nozzle with replaceable inserts. They include a forward jet
• The egg-type radial nozzle is wear resistant and cost competitive
• Great for sanitary applications
• With unrivaled cleaning power on heavy encrusted grease and sludge
• Hardened stainless steel body and replaceable nozzle inserts for longer life

Specifications:
• Nozzle Size: # 30.0
• Jets: 1 at 0°
• Jets: 6 at 75°
• Jets: 3 at 30°
• Material: Stainless steel
• Maximum Pressure: 7,250 PSI
• Inlet: 3/4” Female
• Outside Diameter (O.D.): 1.97”
• Length: 3.94”
• Weight: 48.22 oz

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

3/4” Suttner # 31.0 Warhead / Egg Sewer Cleaning Nozzle. With 1 Front, 6 Rear jets and rated to 7,250 PSI. These are light and agile used as a great all around nozzle with replaceable inserts. They include a forward jet.

Features:
• High Quality, German engineered components
• Best performing and most durable design for higher efficiency
• The egg-type radial nozzle is wear resistant and cost competitive
• Great for sanitary applications
• Hardened stainless steel body and threaded inserts can easily be serviced/replaced for longer life span

Specifications:
• Nozzle Size: # 31.0
• Jets: 1 at 0°
• Jets: 6 at 75°
• Material: Stainless steel
• Maximum Pressure: 7,250 PSI
• Inlet: 3/4” Female
• Outside Diameter (O.D.): 1.97”
• Length: 2.76”
• Weight: 20.0 oz

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

3/4” Suttner #40.0 ST-49 Bullet Sewer Cleaning Nozzle. With 1 Front and 6 Rear jet inserts and rated to 7,252 PSI

Features:
• High Quality, German engineered components
• Made out of wear-resistant, hardened stainless steel
• 1 Front jet with nozzle insert
• 6 Rear jets with nozzle inserts
• All nozzles are provided with exchangeable stainless steel inserts
• Due to this feature the efficiency is considerably higher compared with those nozzles with drilled holes and the service life is several times longer

Applications:
• Extreme pulling and cleaning power
• All around cleaning of dirty or blocked sewers

Specifications:
• Nozzle Size: # 40.0
• Material: Stainless steel
• Maximum Pressure: 7,252 PSI
• Inlet: 3/4” Female
• Outside Diameter (O.D.): 1.496”
• Weight: 11.8 oz

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

3/4” Suttner #40.0 ST-49 Bullet Sewer Cleaning Nozzle. With 6 Rear jet inserts and rated to 7,252 PSI

Features:
• High Quality, German engineered components
• Made out of wear-resistant, hardened stainless steel
• Front jet is plugged
• 6 Rear jets with nozzle inserts
• All nozzles are provided with exchangeable stainless steel inserts
• Due to this feature the efficiency is considerably higher compared with those nozzles with drilled holes and the service life is several times longer

Applications:
• Extreme pulling and cleaning power
• All around cleaning of dirty or blocked sewers

Specifications:
• Nozzle Size: # 40.0
• Material: Stainless steel
• Maximum Pressure: 7,252 PSI
• Inlet: 3/4” Female
• Outside Diameter (O.D.): 1.496”
• Weight: 11.8 oz

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

3/4” Suttner #40.0 ST-49 Milling Sewer Cleaning Nozzle. With 1 Centric, 3 Front and 6 Rear jets and rated to 3,625 PSI

Features:
• High Quality, German engineered components
• With its 4 very strong concentrated forward jets and the sharp cutting edges the milling type nozzles will tear through almost any kind of blockage
• The sharp edges cut, break and penetrate through every kind of blockage
• Made out of wear-resistant, hardened stainless steel
• 1 Centric front jet with nozzle insert
• 3 Lateral front jets with nozzle inserts
• 6 Rear jets with nozzle inserts
• Nozzle is equipped with replaceable hardened stainless steel nozzle inserts
• Due to this feature the efficiency is considerably higher compared with those nozzles with drilled holes and the service life is several times longer

Applications:
• Penetration of completely clogged pipes
• Opening of root masses
• Opening of frozen pipelines
• Hydraulic thrust boring flushing operations

Specifications:
• Nozzle Size: # 40.0
• Material: Stainless steel
• Maximum Pressure: 3,625 PSI
• Inlet: 3/4” Female
• Outside Diameter (O.D.): 1.50”
• Weight: 12.45 oz

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

3/4” Suttner #40.0 ST-49 Milling Sewer Cleaning Nozzle. With 3 Front and 6 Rear jets and rated to 3,625 PSI

Features:
• High Quality, German engineered components
• With its 3 very strong concentrated forward jets and the sharp cutting edges the milling type nozzles will tear through almost any kind of blockage
• The sharp edges cut, break and penetrate through every kind of blockage
• Made out of wear-resistant, hardened stainless steel
• Centric jet is plugged
• 3 Lateral front jets with nozzle inserts
• 6 Rear jets with nozzle inserts
• Nozzle is equipped with replaceable hardened stainless steel nozzle inserts
• Due to this feature the efficiency is considerably higher compared with those nozzles with drilled holes and the service life is several times longer

Applications:
• Penetration of completely clogged pipes
• Opening of root masses
• Opening of frozen pipelines
• Hydraulic thrust boring flushing operations

Specifications:
• Nozzle Size: # 40.0
• Material: Stainless steel
• Maximum Pressure: 3,625 PSI
• Inlet: 3/4” Female
• Outside Diameter (O.D.): 1.50”
• Weight: 12.45 oz

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

3/8” F Suttner #6.5 ST-49 Turbo Nozzle Driver With 6 Rear jet inserts and rated to 5,076 PSI

Features:
• High Quality, German engineered components
• Turbo nozzle driver and ST-356 or ST-456 turbo nozzle are the perfect combination for drilling through blockages with its rotary forward facing jet
• Driven up to the blockage by 6 powerful rear facing hardened stainless steel nozzles the high speed forward facing spinning jet creates a cone shape that has enough cutting force to blast through roots and scale
• It is also ideal for cutting up and shredding tissue and fat deposits

Note:
• Above shown item (1st Picture) is for the driver portion only
• You will have to add the corresponding ST-357 or ST-456 turbo nozzle to complete the driver (2nd Picture)

Specifications:
• Material: Hardened stainless steel
• Maximum Pressure: 5,076 PSI
• Inlet (Sewer Hose): 3/8” Female
• Outlet (Turbo Nozzle): 1/4” Male
• Nozzle Size: # 6.5 (With a #3.0 ST-357 or ST-456 nozzle)
• Note: Requires #3.0 ST-357 or ST-456 1/4” turbo nozzle (Not Included)
• Weight: 0.20 lbs

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

3/8” F Suttner #8.0 ST-49 Turbo Nozzle Driver With 6 Rear jet inserts and rated to 5,076 PSI

Features:
• High Quality, German engineered components
• Turbo nozzle driver and ST-356 or ST-456 turbo nozzle are the perfect combination for drilling through blockages with its rotary forward facing jet
• Driven up to the blockage by 6 powerful rear facing hardened stainless steel nozzles the high speed forward facing spinning jet creates a cone shape that has enough cutting force to blast through roots and scale
• It is also ideal for cutting up and shredding tissue and fat deposits

Note:
• Above shown item (1st Picture) is for the driver portion only
• You will have to add the corresponding ST-357 or ST-456 turbo nozzle to complete the driver (2nd Picture)

Specifications:
• Material: Hardened stainless steel
• Maximum Pressure: 5,076 PSI
• Inlet (Sewer Hose): 3/8” Female
• Outlet (Turbo Nozzle): 1/4” Male
• Nozzle Size: # 8.0 (With a #3.0 ST-357 or ST-456 nozzle)
• Note: Requires #3.0 ST-357 or ST-456 1/4” turbo nozzle (Not Included)
• Weight: 0.20 lbs

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

3/8” F Suttner #9.0 ST-49 Turbo Nozzle Driver With 6 Rear jet inserts and rated to 5,076 PSI

Features:
• High Quality, German engineered components
• Turbo nozzle driver and ST-356 or ST-456 turbo nozzle are the perfect combination for drilling through blockages with its rotary forward facing jet
• Driven up to the blockage by 6 powerful rear facing hardened stainless steel nozzles the high speed forward facing spinning jet creates a cone shape that has enough cutting force to blast through roots and scale
• It is also ideal for cutting up and shredding tissue and fat deposits

Note:
• Above shown item (1st Picture) is for the driver portion only
• You will have to add the corresponding ST-357 or ST-456 turbo nozzle to complete the driver (2nd Picture)

Specifications:
• Material: Hardened stainless steel
• Maximum Pressure: 5,076 PSI
• Inlet (Sewer Hose): 3/8” Female
• Outlet (Turbo Nozzle): 1/4” Male
• Nozzle Size: # 9.0 (With a #3.0 ST-357 or ST-456 nozzle)
• Note: Requires #3.0 ST-357 or ST-456 1/4” turbo nozzle (Not Included)
• Weight: 0.20 lbs

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

3/8” Suttner #10.0 ST-49 Bullet Sewer Cleaning Nozzle. With 1 Front and 4 Rear jet inserts and rated to 7,252 PSI

Features:
• High Quality, German engineered components
• Made out of wear-resistant, hardened stainless steel
• 1 Front jet with nozzle insert
• 4 Rear jets with nozzle inserts, angle of jet is 30°
• Sturdy wall thickness, long service life and a minimum of wear and tear
• All nozzles are provided with hardened stainless steel inserts
• Due to this feature the efficiency is considerably higher compared with those nozzles with drilled holes and the service life is several times longer

Applications:
• Suitable for removal of sludge deposits
• Desilting of pipes
• Opening of frozen pipelines

Specifications:
• Nozzle Size: # 10.0
• Material: Stainless steel
• Maximum Pressure: 7,252 PSI
• Inlet: 3/8” Female
• Outside Diameter (O.D.): 1.18”
• Weight: 5.8 oz

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

3/8” Suttner #10.0 ST-49 Bullet Sewer Cleaning Nozzle. With 1 Front and 6 Rear jet inserts and rated to 7,252 PSI

Features:
• High Quality, German engineered components
• Made out of wear-resistant, hardened stainless steel
• 1 Front jet with nozzle insert
• 6 Rear jets with nozzle inserts, angle of jet is 30°
• Sturdy wall thickness, long service life and a minimum of wear and tear
• All nozzles are provided with hardened stainless steel inserts
• Due to this feature the efficiency is considerably higher compared with those nozzles with drilled holes and the service life is several times longer

Applications:
• Suitable for removal of sludge deposits
• Desilting of pipes
• Opening of frozen pipelines

Specifications:
• Nozzle Size: # 10.0
• Material: Stainless steel
• Maximum Pressure: 7,252 PSI
• Inlet: 3/8” Female
• Outside Diameter (O.D.): 1.18”
• Weight: 5.8 oz

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

3/8” Suttner #10.0 ST-49 Bullet Sewer Cleaning Nozzle. With 4 Rear jet inserts and rated to 7,252 PSI

Features:
• High Quality, German engineered components
• Made out of wear-resistant, hardened stainless steel
• Front jet is plugged
• 4 Rear jets with nozzle inserts, angle of jet is 30°
• Sturdy wall thickness, long service life and a minimum of wear and tear
• All nozzles are provided with hardened stainless steel inserts
• Due to this feature the efficiency is considerably higher compared with those nozzles with drilled holes and the service life is several times longer

Applications:
• Suitable for removal of sludge deposits
• Desilting of pipes
• Opening of frozen pipelines

Specifications:
• Nozzle Size: # 10.0
• Material: Stainless steel
• Maximum Pressure: 7,252 PSI
• Inlet: 3/8” Female
• Outside Diameter (O.D.): 1.18”
• Weight: 5.8 oz

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

3/8” Suttner #10.0 ST-49 Milling Sewer Cleaning Nozzle. With 1 Centric, 3 Front and 6 Rear jets and rated to 5,076 PSI

Features:
• High Quality, German engineered components
• With its 4 very strong concentrated forward jets and the sharp cutting edges the milling type nozzles will tear through almost any kind of blockage
• The sharp edges cut, break and penetrate through every kind of blockage
• Made out of wear-resistant, hardened stainless steel
• 1 Centric front jet with nozzle insert
• 3 Lateral front jets with nozzle inserts
• 6 Rear jets with nozzle inserts
• Nozzle is equipped with replaceable hardened stainless steel nozzle inserts
• Due to this feature the efficiency is considerably higher compared with those nozzles with drilled holes and the service life is several times longer

Applications:
• Penetration of completely clogged pipes
• Opening of root masses
• Opening of frozen pipelines
• Hydraulic thrust boring flushing operations

Specifications:
• Nozzle Size: # 10.0
• Material: Stainless steel
• Maximum Pressure: 5,076 PSI
• Inlet: 3/8” Female
• Outside Diameter (O.D.): 1.11”
• Weight: 4.0 oz

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

3/8” Suttner #10.0 ST-49 Milling Sewer Cleaning Nozzle. With 3 Front and 6 Rear jets and rated to 5,076 PSI

Features:
• High Quality, German engineered components
• With its 3 very strong concentrated forward jets and the sharp cutting edges the milling type nozzles will tear through almost any kind of blockage
• The sharp edges cut, break and penetrate through every kind of blockage
• Made out of wear-resistant, hardened stainless steel
• Centric jet is plugged
• 3 Lateral front jets with nozzle inserts
• 6 Rear jets with nozzle inserts
• Nozzle is equipped with replaceable hardened stainless steel nozzle inserts
• Due to this feature the efficiency is considerably higher compared with those nozzles with drilled holes and the service life is several times longer

Applications:
• Penetration of completely clogged pipes
• Opening of root masses
• Opening of frozen pipelines
• Hydraulic thrust boring flushing operations

Specifications:
• Nozzle Size: # 10.0
• Material: Stainless steel
• Maximum Pressure: 5,076 PSI
• Inlet: 3/8” Female
• Outside Diameter (O.D.): 1.11”
• Weight: 4.0 oz

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

3/8” Suttner # 10.0 Warhead / Egg Radial Sewer Cleaning Nozzle. With 1 Front, 6 Side and 3 Rear jets and rated to 7,250 PSI. The ideal tool for the toughest applications of hard grease and scale that may be encrusted on the interior wall of the pipe

Features:
• High Quality, German engineered components
• Best performing and most durable design for higher efficiency
• These are light and agile used as a great all around nozzle with replaceable inserts. They include a forward jet
• The egg-type radial nozzle is wear resistant and cost competitive
• Great for sanitary applications
• With unrivaled cleaning power on heavy encrusted grease and sludge
• Hardened stainless steel body and replaceable nozzle inserts for longer life

Specifications:
• Nozzle Size: # 10.0
• Jets: 1 at 0°
• Jets: 6 at 75°
• Jets: 3 at 30°
• Material: Stainless steel
• Maximum Pressure: 7,250 PSI
• Inlet: 3/8” Female
• Outside Diameter (O.D.): 1.38”
• Length: 2.17”
• Weight: 11.08 oz

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

3/8” Suttner # 10.0 Warhead / Egg Sewer Cleaning Nozzle. With 1 Front, 6 Rear jets and rated to 7,250 PSI. These are light and agile used as a great all around nozzle with replaceable inserts. They include a forward jet.

Features:
• High Quality, German engineered components
• Best performing and most durable design for higher efficiency
• The egg-type radial nozzle is wear resistant and cost competitive
• Great for sanitary applications
• Hardened stainless steel body and threaded inserts can easily be serviced/replaced for longer life span

Specifications:
• Nozzle Size: # 10.0
• Jets: 1 at 0°
• Jets: 6 at 75°
• Material: Stainless steel
• Maximum Pressure: 7,250 PSI
• Inlet: 3/8” Female
• Outside Diameter (O.D.): 1.38”
• Length: 1.97”
• Weight: 7.30 oz

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

3/8” Suttner #12.0 ST-49 Bullet Sewer Cleaning Nozzle. With 1 Front and 4 Rear jet inserts and rated to 7,252 PSI

Features:
• High Quality, German engineered components
• Made out of wear-resistant, hardened stainless steel
• 1 Front jet with nozzle insert
• 4 Rear jets with nozzle inserts, angle of jet is 30°
• Sturdy wall thickness, long service life and a minimum of wear and tear
• All nozzles are provided with hardened stainless steel inserts
• Due to this feature the efficiency is considerably higher compared with those nozzles with drilled holes and the service life is several times longer

Applications:
• Suitable for removal of sludge deposits
• Desilting of pipes
• Opening of frozen pipelines

Specifications:
• Nozzle Size: # 12.0
• Material: Stainless steel
• Maximum Pressure: 7,252 PSI
• Inlet: 3/8” Female
• Outside Diameter (O.D.): 1.18”
• Weight: 5.8 oz

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

3/8” Suttner #12.0 ST-49 Bullet Sewer Cleaning Nozzle. With 1 Front and 6 Rear jet inserts and rated to 7,252 PSI

Features:
• High Quality, German engineered components
• Made out of wear-resistant, hardened stainless steel
• 1 Front jet with nozzle insert
• 6 Rear jets with nozzle inserts, angle of jet is 30°
• Sturdy wall thickness, long service life and a minimum of wear and tear
• All nozzles are provided with hardened stainless steel inserts
• Due to this feature the efficiency is considerably higher compared with those nozzles with drilled holes and the service life is several times longer

Applications:
• Suitable for removal of sludge deposits
• Desilting of pipes
• Opening of frozen pipelines

Specifications:
• Nozzle Size: # 12.0
• Material: Stainless steel
• Maximum Pressure: 7,252 PSI
• Inlet: 3/8” Female
• Outside Diameter (O.D.): 1.18”
• Weight: 5.8 oz

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

3/8” Suttner #12.0 ST-49 Bullet Sewer Cleaning Nozzle. With 4 Rear jet inserts and rated to 7,252 PSI

Features:
• High Quality, German engineered components
• Made out of wear-resistant, hardened stainless steel
• Front jet is plugged
• 4 Rear jets with nozzle inserts, angle of jet is 30°
• Sturdy wall thickness, long service life and a minimum of wear and tear
• All nozzles are provided with hardened stainless steel inserts
• Due to this feature the efficiency is considerably higher compared with those nozzles with drilled holes and the service life is several times longer

Applications:
• Suitable for removal of sludge deposits
• Desilting of pipes
• Opening of frozen pipelines

Specifications:
• Nozzle Size: # 12.0
• Material: Stainless steel
• Maximum Pressure: 7,252 PSI
• Inlet: 3/8” Female
• Outside Diameter (O.D.): 1.18”
• Weight: 5.8 oz

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

3/8” Suttner #12.0 ST-49 Bullet Sewer Cleaning Nozzle. With 6 Rear jet inserts and rated to 7,252 PSI

Features:
• High Quality, German engineered components
• Made out of wear-resistant, hardened stainless steel
• Front jet is plugged
• 6 Rear jets with nozzle inserts, angle of jet is 30°
• Sturdy wall thickness, long service life and a minimum of wear and tear
• All nozzles are provided with hardened stainless steel inserts
• Due to this feature the efficiency is considerably higher compared with those nozzles with drilled holes and the service life is several times longer

Applications:
• Suitable for removal of sludge deposits
• Desilting of pipes
• Opening of frozen pipelines

Specifications:
• Nozzle Size: # 12.0
• Material: Stainless steel
• Maximum Pressure: 7,252 PSI
• Inlet: 3/8” Female
• Outside Diameter (O.D.): 1.18”
• Weight: 5.8 oz

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

3/8” Suttner #12.0 ST-49 Milling Sewer Cleaning Nozzle. With 1 Centric, 3 Front and 6 Rear jets and rated to 5,076 PSI

Features:
• High Quality, German engineered components
• With its 4 very strong concentrated forward jets and the sharp cutting edges the milling type nozzles will tear through almost any kind of blockage
• The sharp edges cut, break and penetrate through every kind of blockage
• Made out of wear-resistant, hardened stainless steel
• 1 Centric front jet with nozzle insert
• 3 Lateral front jets with nozzle inserts
• 6 Rear jets with nozzle inserts
• Nozzle is equipped with replaceable hardened stainless steel nozzle inserts
• Due to this feature the efficiency is considerably higher compared with those nozzles with drilled holes and the service life is several times longer

Applications:
• Penetration of completely clogged pipes
• Opening of root masses
• Opening of frozen pipelines
• Hydraulic thrust boring flushing operations

Specifications:
• Nozzle Size: # 12.0
• Material: Stainless steel
• Maximum Pressure: 5,076 PSI
• Inlet: 3/8” Female
• Outside Diameter (O.D.): 1.11”
• Weight: 4.0 oz

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

3/8” Suttner #12.0 ST-49 Milling Sewer Cleaning Nozzle. With 3 Front and 6 Rear jets and rated to 5,076 PSI

Features:
• High Quality, German engineered components
• With its 3 very strong concentrated forward jets and the sharp cutting edges the milling type nozzles will tear through almost any kind of blockage
• The sharp edges cut, break and penetrate through every kind of blockage
• Made out of wear-resistant, hardened stainless steel
• Centric jet is plugged
• 3 Lateral front jets with nozzle inserts
• 6 Rear jets with nozzle inserts
• Nozzle is equipped with replaceable hardened stainless steel nozzle inserts
• Due to this feature the efficiency is considerably higher compared with those nozzles with drilled holes and the service life is several times longer

Applications:
• Penetration of completely clogged pipes
• Opening of root masses
• Opening of frozen pipelines
• Hydraulic thrust boring flushing operations

Specifications:
• Nozzle Size: # 12.0
• Material: Stainless steel
• Maximum Pressure: 5,076 PSI
• Inlet: 3/8” Female
• Outside Diameter (O.D.): 1.11”
• Weight: 4.0 oz

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

3/8” Suttner # 12.0 Warhead / Egg Radial Sewer Cleaning Nozzle. With 1 Front, 6 Side and 3 Rear jets and rated to 7,250 PSI. The ideal tool for the toughest applications of hard grease and scale that may be encrusted on the interior wall of the pipe

Features:
• High Quality, German engineered components
• Best performing and most durable design for higher efficiency
• These are light and agile used as a great all around nozzle with replaceable inserts. They include a forward jet
• The egg-type radial nozzle is wear resistant and cost competitive
• Great for sanitary applications
• With unrivaled cleaning power on heavy encrusted grease and sludge
• Hardened stainless steel body and replaceable nozzle inserts for longer life

Specifications:
• Nozzle Size: # 12.0
• Jets: 1 at 0°
• Jets: 6 at 75°
• Jets: 3 at 30°
• Material: Stainless steel
• Maximum Pressure: 7,250 PSI
• Inlet: 3/8” Female
• Outside Diameter (O.D.): 1.38”
• Length: 2.17”
• Weight: 11.08 oz

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

3/8” Suttner # 12.0 Warhead / Egg Sewer Cleaning Nozzle. With 1 Front, 6 Rear jets and rated to 7,250 PSI. These are light and agile used as a great all around nozzle with replaceable inserts. They include a forward jet.

Features:
• High Quality, German engineered components
• Best performing and most durable design for higher efficiency
• The egg-type radial nozzle is wear resistant and cost competitive
• Great for sanitary applications
• Hardened stainless steel body and threaded inserts can easily be serviced/replaced for longer life span

Specifications:
• Nozzle Size: # 12.0
• Jets: 1 at 0°
• Jets: 6 at 75°
• Material: Stainless steel
• Maximum Pressure: 7,250 PSI
• Inlet: 3/8” Female
• Outside Diameter (O.D.): 1.38”
• Length: 1.97”
• Weight: 7.30 oz

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

3/8” Suttner #15.0 ST-49 Bullet Sewer Cleaning Nozzle. With 1 Front and 4 Rear jet inserts and rated to 7,252 PSI

Features:
• High Quality, German engineered components
• Made out of wear-resistant, hardened stainless steel
• 1 Front jet with nozzle insert
• 4 Rear jets with nozzle inserts, angle of jet is 30°
• Sturdy wall thickness, long service life and a minimum of wear and tear
• All nozzles are provided with hardened stainless steel inserts
• Due to this feature the efficiency is considerably higher compared with those nozzles with drilled holes and the service life is several times longer

Applications:
• Suitable for removal of sludge deposits
• Desilting of pipes
• Opening of frozen pipelines

Specifications:
• Nozzle Size: # 15.0
• Material: Stainless steel
• Maximum Pressure: 7,252 PSI
• Inlet: 3/8” Female
• Outside Diameter (O.D.): 1.18”
• Weight: 5.8 oz

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

3/8” Suttner #15.0 ST-49 Bullet Sewer Cleaning Nozzle. With 1 Front and 6 Rear jet inserts and rated to 7,252 PSI

Features:
• High Quality, German engineered components
• Made out of wear-resistant, hardened stainless steel
• 1 Front jet with nozzle insert
• 6 Rear jets with nozzle inserts, angle of jet is 30°
• Sturdy wall thickness, long service life and a minimum of wear and tear
• All nozzles are provided with hardened stainless steel inserts
• Due to this feature the efficiency is considerably higher compared with those nozzles with drilled holes and the service life is several times longer

Applications:
• Suitable for removal of sludge deposits
• Desilting of pipes
• Opening of frozen pipelines

Specifications:
• Nozzle Size: # 15.0
• Material: Stainless steel
• Maximum Pressure: 7,252 PSI
• Inlet: 3/8” Female
• Outside Diameter (O.D.): 1.18”
• Weight: 5.8 oz

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

3/8” Suttner #15.0 ST-49 Milling Sewer Cleaning Nozzle. With 1 Centric, 3 Front and 6 Rear jets and rated to 5,076 PSI

Features:
• High Quality, German engineered components
• With its 4 very strong concentrated forward jets and the sharp cutting edges the milling type nozzles will tear through almost any kind of blockage
• The sharp edges cut, break and penetrate through every kind of blockage
• Made out of wear-resistant, hardened stainless steel
• 1 Centric front jet with nozzle insert
• 3 Lateral front jets with nozzle inserts
• 6 Rear jets with nozzle inserts
• Nozzle is equipped with replaceable hardened stainless steel nozzle inserts
• Due to this feature the efficiency is considerably higher compared with those nozzles with drilled holes and the service life is several times longer

Applications:
• Penetration of completely clogged pipes
• Opening of root masses
• Opening of frozen pipelines
• Hydraulic thrust boring flushing operations

Specifications:
• Nozzle Size: # 15.0
• Material: Stainless steel
• Maximum Pressure: 5,076 PSI
• Inlet: 3/8” Female
• Outside Diameter (O.D.): 1.11”
• Weight: 4.0 oz

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

3/8” Suttner # 15.0 Warhead / Egg Radial Sewer Cleaning Nozzle. With 1 Front, 6 Side and 3 Rear jets and rated to 7,250 PSI. The ideal tool for the toughest applications of hard grease and scale that may be encrusted on the interior wall of the pipe

Features:
• High Quality, German engineered components
• Best performing and most durable design for higher efficiency
• These are light and agile used as a great all around nozzle with replaceable inserts. They include a forward jet
• The egg-type radial nozzle is wear resistant and cost competitive
• Great for sanitary applications
• With unrivaled cleaning power on heavy encrusted grease and sludge
• Hardened stainless steel body and replaceable nozzle inserts for longer life

Specifications:
• Nozzle Size: # 15.0
• Jets: 1 at 0°
• Jets: 6 at 75°
• Jets: 3 at 30°
• Material: Stainless steel
• Maximum Pressure: 7,250 PSI
• Inlet: 3/8” Female
• Outside Diameter (O.D.): 1.38”
• Length: 2.17”
• Weight: 11.08 oz

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

3/8” Suttner # 15.0 Warhead / Egg Sewer Cleaning Nozzle. With 1 Front, 6 Rear jets and rated to 7,250 PSI. These are light and agile used as a great all around nozzle with replaceable inserts. They include a forward jet.

Features:
• High Quality, German engineered components
• Best performing and most durable design for higher efficiency
• The egg-type radial nozzle is wear resistant and cost competitive
• Great for sanitary applications
• Hardened stainless steel body and threaded inserts can easily be serviced/replaced for longer life span

Specifications:
• Nozzle Size: # 15.0
• Jets: 1 at 0°
• Jets: 6 at 75°
• Material: Stainless steel
• Maximum Pressure: 7,250 PSI
• Inlet: 3/8” Female
• Outside Diameter (O.D.): 1.38”
• Length: 1.97”
• Weight: 7.30 oz

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

3/8” Suttner #20.0 ST-49 Bullet Sewer Cleaning Nozzle. With 1 Front and 4 Rear jet inserts and rated to 7,252 PSI

Features:
• High Quality, German engineered components
• Made out of wear-resistant, hardened stainless steel
• 1 Front jet with nozzle insert
• 4 Rear jets with nozzle inserts, angle of jet is 30°
• Sturdy wall thickness, long service life and a minimum of wear and tear
• All nozzles are provided with hardened stainless steel inserts
• Due to this feature the efficiency is considerably higher compared with those nozzles with drilled holes and the service life is several times longer

Applications:
• Suitable for removal of sludge deposits
• Desilting of pipes
• Opening of frozen pipelines

Specifications:
• Nozzle Size: # 20.0
• Material: Stainless steel
• Maximum Pressure: 7,252 PSI
• Inlet: 3/8” Female
• Outside Diameter (O.D.): 1.18”
• Weight: 5.8 oz

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

3/8” Suttner #20.0 ST-49 Bullet Sewer Cleaning Nozzle. With 1 Front and 6 Rear jet inserts and rated to 7,252 PSI

Features:
• High Quality, German engineered components
• Made out of wear-resistant, hardened stainless steel
• 1 Front jet with nozzle insert
• 6 Rear jets with nozzle inserts, angle of jet is 30°
• Sturdy wall thickness, long service life and a minimum of wear and tear
• All nozzles are provided with hardened stainless steel inserts
• Due to this feature the efficiency is considerably higher compared with those nozzles with drilled holes and the service life is several times longer

Applications:
• Suitable for removal of sludge deposits
• Desilting of pipes
• Opening of frozen pipelines

Specifications:
• Nozzle Size: # 20.0
• Material: Stainless steel
• Maximum Pressure: 7,252 PSI
• Inlet: 3/8” Female
• Outside Diameter (O.D.): 1.18”
• Weight: 5.8 oz

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

3/8” Suttner #20.0 ST-49 Bullet Sewer Cleaning Nozzle. With 6 Rear jet inserts and rated to 7,252 PSI

Features:
• High Quality, German engineered components
• Made out of wear-resistant, hardened stainless steel
• Front jet is plugged
• 6 Rear jets with nozzle inserts, angle of jet is 30°
• Sturdy wall thickness, long service life and a minimum of wear and tear
• All nozzles are provided with hardened stainless steel inserts
• Due to this feature the efficiency is considerably higher compared with those nozzles with drilled holes and the service life is several times longer

Applications:
• Suitable for removal of sludge deposits
• Desilting of pipes
• Opening of frozen pipelines

Specifications:
• Nozzle Size: # 20.0
• Material: Stainless steel
• Maximum Pressure: 7,252 PSI
• Inlet: 3/8” Female
• Outside Diameter (O.D.): 1.18”
• Weight: 5.8 oz

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

3/8” Suttner #20.0 ST-49 Milling Sewer Cleaning Nozzle. With 1 Centric, 3 Front and 6 Rear jets and rated to 5,076 PSI

Features:
• High Quality, German engineered components
• With its 4 very strong concentrated forward jets and the sharp cutting edges the milling type nozzles will tear through almost any kind of blockage
• The sharp edges cut, break and penetrate through every kind of blockage
• Made out of wear-resistant, hardened stainless steel
• 1 Centric front jet with nozzle insert
• 3 Lateral front jets with nozzle inserts
• 6 Rear jets with nozzle inserts
• Nozzle is equipped with replaceable hardened stainless steel nozzle inserts
• Due to this feature the efficiency is considerably higher compared with those nozzles with drilled holes and the service life is several times longer

Applications:
• Penetration of completely clogged pipes
• Opening of root masses
• Opening of frozen pipelines
• Hydraulic thrust boring flushing operations

Specifications:
• Nozzle Size: # 20.0
• Material: Stainless steel
• Maximum Pressure: 5,076 PSI
• Inlet: 3/8” Female
• Outside Diameter (O.D.): 1.11”
• Weight: 4.0 oz

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

3/8” Suttner #20.0 ST-49 Milling Sewer Cleaning Nozzle. With 3 Front and 6 Rear jets and rated to 5,076 PSI

Features:
• High Quality, German engineered components
• With its 3 very strong concentrated forward jets and the sharp cutting edges the milling type nozzles will tear through almost any kind of blockage
• The sharp edges cut, break and penetrate through every kind of blockage
• Made out of wear-resistant, hardened stainless steel
• Centric jet is plugged
• 3 Lateral front jets with nozzle inserts
• 6 Rear jets with nozzle inserts
• Nozzle is equipped with replaceable hardened stainless steel nozzle inserts
• Due to this feature the efficiency is considerably higher compared with those nozzles with drilled holes and the service life is several times longer

Applications:
• Penetration of completely clogged pipes
• Opening of root masses
• Opening of frozen pipelines
• Hydraulic thrust boring flushing operations

Specifications:
• Nozzle Size: # 20.0
• Material: Stainless steel
• Maximum Pressure: 5,076 PSI
• Inlet: 3/8” Female
• Outside Diameter (O.D.): 1.11”
• Weight: 4.0 oz

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

3/8” Suttner # 20.0 Warhead / Egg Radial Sewer Cleaning Nozzle. With 1 Front, 6 Side and 3 Rear jets and rated to 7,250 PSI. The ideal tool for the toughest applications of hard grease and scale that may be encrusted on the interior wall of the pipe

Features:
• High Quality, German engineered components
• Best performing and most durable design for higher efficiency
• These are light and agile used as a great all around nozzle with replaceable inserts. They include a forward jet
• The egg-type radial nozzle is wear resistant and cost competitive
• Great for sanitary applications
• With unrivaled cleaning power on heavy encrusted grease and sludge
• Hardened stainless steel body and replaceable nozzle inserts for longer life

Specifications:
• Nozzle Size: # 20.0
• Jets: 1 at 0°
• Jets: 6 at 75°
• Jets: 3 at 30°
• Material: Stainless steel
• Maximum Pressure: 7,250 PSI
• Inlet: 3/8” Female
• Outside Diameter (O.D.): 1.38”
• Length: 2.17”
• Weight: 11.08 oz

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

3/8” Suttner # 20.0 Warhead / Egg Sewer Cleaning Nozzle. With 1 Front, 6 Rear jets and rated to 7,250 PSI. These are light and agile used as a great all around nozzle with replaceable inserts. They include a forward jet.

Features:
• High Quality, German engineered components
• Best performing and most durable design for higher efficiency
• The egg-type radial nozzle is wear resistant and cost competitive
• Great for sanitary applications
• Hardened stainless steel body and threaded inserts can easily be serviced/replaced for longer life span

Specifications:
• Nozzle Size: # 20.0
• Jets: 1 at 0°
• Jets: 6 at 75°
• Material: Stainless steel
• Maximum Pressure: 7,250 PSI
• Inlet: 3/8” Female
• Outside Diameter (O.D.): 1.38”
• Length: 1.97”
• Weight: 7.30 oz

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

3/8” Suttner #25.0 ST-49 Milling Sewer Cleaning Nozzle. With 1 Centric, 3 Front and 6 Rear jets and rated to 5,076 PSI

Features:
• High Quality, German engineered components
• With its 4 very strong concentrated forward jets and the sharp cutting edges the milling type nozzles will tear through almost any kind of blockage
• The sharp edges cut, break and penetrate through every kind of blockage
• Made out of wear-resistant, hardened stainless steel
• 1 Centric front jet with nozzle insert
• 3 Lateral front jets with nozzle inserts
• 6 Rear jets with nozzle inserts
• Nozzle is equipped with replaceable hardened stainless steel nozzle inserts
• Due to this feature the efficiency is considerably higher compared with those nozzles with drilled holes and the service life is several times longer

Applications:
• Penetration of completely clogged pipes
• Opening of root masses
• Opening of frozen pipelines
• Hydraulic thrust boring flushing operations

Specifications:
• Nozzle Size: # 25.0
• Material: Stainless steel
• Maximum Pressure: 5,076 PSI
• Inlet: 3/8” Female
• Outside Diameter (O.D.): 1.11”
• Weight: 4.0 oz

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

3/8” Suttner #27.0 ST-49 Milling Sewer Cleaning Nozzle. With 1 Centric, 3 Front and 6 Rear jets and rated to 5,076 PSI

Features:
• High Quality, German engineered components
• With its 4 very strong concentrated forward jets and the sharp cutting edges the milling type nozzles will tear through almost any kind of blockage
• The sharp edges cut, break and penetrate through every kind of blockage
• Made out of wear-resistant, hardened stainless steel
• 1 Centric front jet with nozzle insert
• 3 Lateral front jets with nozzle inserts
• 6 Rear jets with nozzle inserts
• Nozzle is equipped with replaceable hardened stainless steel nozzle inserts
• Due to this feature the efficiency is considerably higher compared with those nozzles with drilled holes and the service life is several times longer

Applications:
• Penetration of completely clogged pipes
• Opening of root masses
• Opening of frozen pipelines
• Hydraulic thrust boring flushing operations

Specifications:
• Nozzle Size: # 27.0
• Material: Stainless steel
• Maximum Pressure: 5,076 PSI
• Inlet: 3/8” Female
• Outside Diameter (O.D.): 1.11”
• Weight: 4.0 oz

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

3/8” Suttner #5.5 ST-49 Milling Sewer Cleaning Nozzle. With 3 Front and 6 Rear jets and rated to 5,076 PSI

Features:
• High Quality, German engineered components
• With its 3 very strong concentrated forward jets and the sharp cutting edges the milling type nozzles will tear through almost any kind of blockage
• The sharp edges cut, break and penetrate through every kind of blockage
• Made out of wear-resistant, hardened stainless steel
• Centric jet is plugged
• 3 Lateral front jets with nozzle inserts
• 6 Rear jets with nozzle inserts
• Nozzle is equipped with replaceable hardened stainless steel nozzle inserts
• Due to this feature the efficiency is considerably higher compared with those nozzles with drilled holes and the service life is several times longer

Applications:
• Penetration of completely clogged pipes
• Opening of root masses
• Opening of frozen pipelines
• Hydraulic thrust boring flushing operations

Specifications:
• Nozzle Size: # 5.5
• Material: Stainless steel
• Maximum Pressure: 5,076 PSI
• Inlet: 3/8” Female
• Outside Diameter (O.D.): 1.11”
• Weight: 4.0 oz

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

3/8” Suttner #6.0 ST-49 Bullet Sewer Cleaning Nozzle. With 1 Front and 4 Rear jet inserts and rated to 7,252 PSI

Features:
• High Quality, German engineered components
• Made out of wear-resistant, hardened stainless steel
• 1 Front jet with nozzle insert
• 4 Rear jets with nozzle inserts, angle of jet is 30°
• Sturdy wall thickness, long service life and a minimum of wear and tear
• All nozzles are provided with hardened stainless steel inserts
• Due to this feature the efficiency is considerably higher compared with those nozzles with drilled holes and the service life is several times longer

Applications:
• Suitable for removal of sludge deposits
• Desilting of pipes
• Opening of frozen pipelines

Specifications:
• Nozzle Size: # 6.0
• Material: Stainless steel
• Maximum Pressure: 7,252 PSI
• Inlet: 3/8” Female
• Outside Diameter (O.D.): 1.18”
• Weight: 5.8 oz

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

3/8” Suttner #6.0 ST-49 Bullet Sewer Cleaning Nozzle. With 1 Front and 6 Rear jet inserts and rated to 7,252 PSI

Features:
• High Quality, German engineered components
• Made out of wear-resistant, hardened stainless steel
• 1 Front jet with nozzle insert
• 6 Rear jets with nozzle inserts, angle of jet is 30°
• Sturdy wall thickness, long service life and a minimum of wear and tear
• All nozzles are provided with hardened stainless steel inserts
• Due to this feature the efficiency is considerably higher compared with those nozzles with drilled holes and the service life is several times longer

Applications:
• Suitable for removal of sludge deposits
• Desilting of pipes
• Opening of frozen pipelines

Specifications:
• Nozzle Size: # 6.0
• Material: Stainless steel
• Maximum Pressure: 7,252 PSI
• Inlet: 3/8” Female
• Outside Diameter (O.D.): 1.18”
• Weight: 5.8 oz

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

3/8” Suttner #6.0 ST-49 Bullet Sewer Cleaning Nozzle. With 6 Rear jet inserts and rated to 7,252 PSI

Features:
• High Quality, German engineered components
• Made out of wear-resistant, hardened stainless steel
• Front jet is plugged
• 6 Rear jets with nozzle inserts, angle of jet is 30°
• Sturdy wall thickness, long service life and a minimum of wear and tear
• All nozzles are provided with hardened stainless steel inserts
• Due to this feature the efficiency is considerably higher compared with those nozzles with drilled holes and the service life is several times longer

Applications:
• Suitable for removal of sludge deposits
• Desilting of pipes
• Opening of frozen pipelines

Specifications:
• Nozzle Size: # 6.0
• Material: Stainless steel
• Maximum Pressure: 7,252 PSI
• Inlet: 3/8” Female
• Outside Diameter (O.D.): 1.18”
• Weight: 5.8 oz

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

3/8” Suttner # 6.5 Warhead / Egg Radial Sewer Cleaning Nozzle. With 1 Front, 6 Side and 3 Rear jets and rated to 7,250 PSI. The ideal tool for the toughest applications of hard grease and scale that may be encrusted on the interior wall of the pipe

Features:
• High Quality, German engineered components
• Best performing and most durable design for higher efficiency
• These are light and agile used as a great all around nozzle with replaceable inserts. They include a forward jet
• The egg-type radial nozzle is wear resistant and cost competitive
• Great for sanitary applications
• With unrivaled cleaning power on heavy encrusted grease and sludge
• Hardened stainless steel body and replaceable nozzle inserts for longer life

Specifications:
• Nozzle Size: # 6.5
• Jets: 1 at 0°
• Jets: 6 at 75°
• Jets: 3 at 30°
• Material: Stainless steel
• Maximum Pressure: 7,250 PSI
• Inlet: 3/8” Female
• Outside Diameter (O.D.): 1.38”
• Length: 2.17”
• Weight: 11.08 oz

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

3/8” Suttner # 6.5 Warhead / Egg Sewer Cleaning Nozzle. With 1 Front, 6 Rear jets and rated to 7,250 PSI. These are light and agile used as a great all around nozzle with replaceable inserts. They include a forward jet.

Features:
• High Quality, German engineered components
• Best performing and most durable design for higher efficiency
• The egg-type radial nozzle is wear resistant and cost competitive
• Great for sanitary applications
• Hardened stainless steel body and threaded inserts can easily be serviced/replaced for longer life span

Specifications:
• Nozzle Size: # 6.5
• Jets: 1 at 0°
• Jets: 6 at 75°
• Material: Stainless steel
• Maximum Pressure: 7,250 PSI
• Inlet: 3/8” Female
• Outside Diameter (O.D.): 1.38”
• Length: 1.97”
• Weight: 7.30 oz

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

3/8” Suttner #7.0 ST-49 Milling Sewer Cleaning Nozzle. With 1 Centric, 3 Front and 6 Rear jets and rated to 5,076 PSI

Features:
• High Quality, German engineered components
• With its 4 very strong concentrated forward jets and the sharp cutting edges the milling type nozzles will tear through almost any kind of blockage
• The sharp edges cut, break and penetrate through every kind of blockage
• Made out of wear-resistant, hardened stainless steel
• 1 Centric front jet with nozzle insert
• 3 Lateral front jets with nozzle inserts
• 6 Rear jets with nozzle inserts
• Nozzle is equipped with replaceable hardened stainless steel nozzle inserts
• Due to this feature the efficiency is considerably higher compared with those nozzles with drilled holes and the service life is several times longer

Applications:
• Penetration of completely clogged pipes
• Opening of root masses
• Opening of frozen pipelines
• Hydraulic thrust boring flushing operations

Specifications:
• Nozzle Size: # 7.0
• Material: Stainless steel
• Maximum Pressure: 5,076 PSI
• Inlet: 3/8” Female
• Outside Diameter (O.D.): 1.11”
• Weight: 4.0 oz

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

3/8” Suttner #7.0 ST-49 Milling Sewer Cleaning Nozzle. With 3 Front and 6 Rear jets and rated to 5,076 PSI

Features:
• High Quality, German engineered components
• With its 3 very strong concentrated forward jets and the sharp cutting edges the milling type nozzles will tear through almost any kind of blockage
• The sharp edges cut, break and penetrate through every kind of blockage
• Made out of wear-resistant, hardened stainless steel
• Centric jet is plugged
• 3 Lateral front jets with nozzle inserts
• 6 Rear jets with nozzle inserts
• Nozzle is equipped with replaceable hardened stainless steel nozzle inserts
• Due to this feature the efficiency is considerably higher compared with those nozzles with drilled holes and the service life is several times longer

Applications:
• Penetration of completely clogged pipes
• Opening of root masses
• Opening of frozen pipelines
• Hydraulic thrust boring flushing operations

Specifications:
• Nozzle Size: # 7.0
• Material: Stainless steel
• Maximum Pressure: 5,076 PSI
• Inlet: 3/8” Female
• Outside Diameter (O.D.): 1.11”
• Weight: 4.0 oz

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

3/8” Suttner #8.0 ST-49 Bullet Sewer Cleaning Nozzle. With 1 Front and 4 Rear jet inserts and rated to 7,252 PSI

Features:
• High Quality, German engineered components
• Made out of wear-resistant, hardened stainless steel
• 1 Front jet with nozzle insert
• 4 Rear jets with nozzle inserts, angle of jet is 30°
• Sturdy wall thickness, long service life and a minimum of wear and tear
• All nozzles are provided with hardened stainless steel inserts
• Due to this feature the efficiency is considerably higher compared with those nozzles with drilled holes and the service life is several times longer

Applications:
• Suitable for removal of sludge deposits
• Desilting of pipes
• Opening of frozen pipelines

Specifications:
• Nozzle Size: # 8.0
• Material: Stainless steel
• Maximum Pressure: 7,252 PSI
• Inlet: 3/8” Female
• Outside Diameter (O.D.): 1.18”
• Weight: 5.8 oz

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

3/8” Suttner #8.0 ST-49 Bullet Sewer Cleaning Nozzle. With 1 Front and 6 Rear jet inserts and rated to 7,252 PSI

Features:
• High Quality, German engineered components
• Made out of wear-resistant, hardened stainless steel
• 1 Front jet with nozzle insert
• 6 Rear jets with nozzle inserts, angle of jet is 30°
• Sturdy wall thickness, long service life and a minimum of wear and tear
• All nozzles are provided with hardened stainless steel inserts
• Due to this feature the efficiency is considerably higher compared with those nozzles with drilled holes and the service life is several times longer

Applications:
• Suitable for removal of sludge deposits
• Desilting of pipes
• Opening of frozen pipelines

Specifications:
• Nozzle Size: # 8.0
• Material: Stainless steel
• Maximum Pressure: 7,252 PSI
• Inlet: 3/8” Female
• Outside Diameter (O.D.): 1.18”
• Weight: 5.8 oz

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

3/8” Suttner #8.0 ST-49 Bullet Sewer Cleaning Nozzle. With 6 Rear jet inserts and rated to 7,252 PSI

Features:
• High Quality, German engineered components
• Made out of wear-resistant, hardened stainless steel
• Front jet is plugged
• 6 Rear jets with nozzle inserts, angle of jet is 30°
• Sturdy wall thickness, long service life and a minimum of wear and tear
• All nozzles are provided with hardened stainless steel inserts
• Due to this feature the efficiency is considerably higher compared with those nozzles with drilled holes and the service life is several times longer

Applications:
• Suitable for removal of sludge deposits
• Desilting of pipes
• Opening of frozen pipelines

Specifications:
• Nozzle Size: # 8.0
• Material: Stainless steel
• Maximum Pressure: 7,252 PSI
• Inlet: 3/8” Female
• Outside Diameter (O.D.): 1.18”
• Weight: 5.8 oz

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

3/8” Suttner #8.0 ST-49 Milling Sewer Cleaning Nozzle. With 1 Centric, 3 Front and 6 Rear jets and rated to 5,076 PSI

Features:
• High Quality, German engineered components
• With its 4 very strong concentrated forward jets and the sharp cutting edges the milling type nozzles will tear through almost any kind of blockage
• The sharp edges cut, break and penetrate through every kind of blockage
• Made out of wear-resistant, hardened stainless steel
• 1 Centric front jet with nozzle insert
• 3 Lateral front jets with nozzle inserts
• 6 Rear jets with nozzle inserts
• Nozzle is equipped with replaceable hardened stainless steel nozzle inserts
• Due to this feature the efficiency is considerably higher compared with those nozzles with drilled holes and the service life is several times longer

Applications:
• Penetration of completely clogged pipes
• Opening of root masses
• Opening of frozen pipelines
• Hydraulic thrust boring flushing operations

Specifications:
• Nozzle Size: # 8.0
• Material: Stainless steel
• Maximum Pressure: 5,076 PSI
• Inlet: 3/8” Female
• Outside Diameter (O.D.): 1.11”
• Weight: 4.0 oz

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

3/8” Suttner #8.0 ST-49 Milling Sewer Cleaning Nozzle. With 3 Front and 6 Rear jets and rated to 5,076 PSI

Features:
• High Quality, German engineered components
• With its 3 very strong concentrated forward jets and the sharp cutting edges the milling type nozzles will tear through almost any kind of blockage
• The sharp edges cut, break and penetrate through every kind of blockage
• Made out of wear-resistant, hardened stainless steel
• Centric jet is plugged
• 3 Lateral front jets with nozzle inserts
• 6 Rear jets with nozzle inserts
• Nozzle is equipped with replaceable hardened stainless steel nozzle inserts
• Due to this feature the efficiency is considerably higher compared with those nozzles with drilled holes and the service life is several times longer

Applications:
• Penetration of completely clogged pipes
• Opening of root masses
• Opening of frozen pipelines
• Hydraulic thrust boring flushing operations

Specifications:
• Nozzle Size: # 8.0
• Material: Stainless steel
• Maximum Pressure: 5,076 PSI
• Inlet: 3/8” Female
• Outside Diameter (O.D.): 1.11”
• Weight: 4.0 oz

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

3/8” Suttner # 8.0 Warhead / Egg Radial Sewer Cleaning Nozzle. With 1 Front, 6 Side and 3 Rear jets and rated to 7,250 PSI. The ideal tool for the toughest applications of hard grease and scale that may be encrusted on the interior wall of the pipe

Features:
• High Quality, German engineered components
• Best performing and most durable design for higher efficiency
• These are light and agile used as a great all around nozzle with replaceable inserts. They include a forward jet
• The egg-type radial nozzle is wear resistant and cost competitive
• Great for sanitary applications
• With unrivaled cleaning power on heavy encrusted grease and sludge
• Hardened stainless steel body and replaceable nozzle inserts for longer life

Specifications:
• Nozzle Size: # 8.0
• Jets: 1 at 0°
• Jets: 6 at 75°
• Jets: 3 at 30°
• Material: Stainless steel
• Maximum Pressure: 7,250 PSI
• Inlet: 3/8” Female
• Outside Diameter (O.D.): 1.38”
• Length: 2.17”
• Weight: 11.08 oz

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

3/8” Suttner # 8.0 Warhead / Egg Sewer Cleaning Nozzle. With 1 Front, 6 Rear jets and rated to 7,250 PSI. These are light and agile used as a great all around nozzle with replaceable inserts. They include a forward jet.

Features:
• High Quality, German engineered components
• Best performing and most durable design for higher efficiency
• The egg-type radial nozzle is wear resistant and cost competitive
• Great for sanitary applications
• Hardened stainless steel body and threaded inserts can easily be serviced/replaced for longer life span

Specifications:
• Nozzle Size: # 8.0
• Jets: 1 at 0°
• Jets: 6 at 75°
• Material: Stainless steel
• Maximum Pressure: 7,250 PSI
• Inlet: 3/8” Female
• Outside Diameter (O.D.): 1.38”
• Length: 1.97”
• Weight: 7.30 oz

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

3/8” Suttner #9.0 ST-49 Milling Sewer Cleaning Nozzle. With 1 Centric, 3 Front and 6 Rear jets and rated to 5,076 PSI

Features:
• High Quality, German engineered components
• With its 4 very strong concentrated forward jets and the sharp cutting edges the milling type nozzles will tear through almost any kind of blockage
• The sharp edges cut, break and penetrate through every kind of blockage
• Made out of wear-resistant, hardened stainless steel
• 1 Centric front jet with nozzle insert
• 3 Lateral front jets with nozzle inserts
• 6 Rear jets with nozzle inserts
• Nozzle is equipped with replaceable hardened stainless steel nozzle inserts
• Due to this feature the efficiency is considerably higher compared with those nozzles with drilled holes and the service life is several times longer

Applications:
• Penetration of completely clogged pipes
• Opening of root masses
• Opening of frozen pipelines
• Hydraulic thrust boring flushing operations

Specifications:
• Nozzle Size: # 9.0
• Material: Stainless steel
• Maximum Pressure: 5,076 PSI
• Inlet: 3/8” Female
• Outside Diameter (O.D.): 1.11”
• Weight: 4.0 oz

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

32 oz. Replacement Bottle for Suttner ST-73 & ST-73.2 Foamer

Features
• High Quality, German engineered components
• High or low pressure operation is controlled by twisting the valve knob
• Threads are rolled on providing consistent sealing and four times the strength than cut threads
• Lance is equipped with 65° x #30 low pressure brass soap nozzle
• Nozzle protectors included

Specifications
• Max Pressure: 3,625 PSI
• Length: 38”
• Max Temp: 300° F.
• Lance Material: Plated steel
• Inlet: 1/4" Male NPT
• Outlets: 1/4" Female NPT x 1/4” Soap Nozzle
• Note: 1/4” MPT Nozzle not included
• Weight: 2.72 lb

Suttner 38” ST-53.2 Stainless Steel Dual Lance 5,800 PSI With Brass Soap Nozzle and Nozzle Protectors. For use when high and low pressures are needed. For example, spraying cleaning agents with low pressure through an injector valve (chemical injector required) and then cleaning with high pressure

Features
• The serious high pressure spray contractors choice
• High Quality, German engineered components
• Stainless steel construction
• Features our comfortable ergonomic shaped cool & compact molded grip resistant to heat
• Suitable for corrosive chemicals
• Simple Hi/Low pressure adjustment valve
• Premium dual-purpose lance that adds extreme versatility to your cleaning tools and accessories
• Lance is equipped with 65° x #30 low pressure brass soap nozzle
• Nozzle protectors included
• Optional stainless steel soap nozzle available

Specifications
• Max Pressure: 5,800 PSI
• Length: 38.5”
• Max Temp: 302° F.
• Lance & Valve Material: Stainless steel
• Inlet: 1/4" Male NPT
• Outlets: 1/4" Female NPT x 1/4” Soap Nozzle
• Note: 1/4” MPT Nozzle not included
• Weight: 2.75 lb

Features
• High Quality, German engineered components
• High or low pressure operation is controlled by twisting the side handle
• The side handle helps manage the lance with ease for longer working periods
• Threads are rolled on providing consistent sealing and four times the strength than cut threads
• Lance is equipped with 65° x #30 low pressure brass soap nozzle
• Nozzle protectors included

Specifications
• Max Pressure: 4,500 PSI
• Length: 38”
• Max Temp: 300° F.
• Lance Material: Plated steel
• Inlet: 1/4" Male NPT
• Outlets: 1/4" Female NPT x 1/4” Soap Nozzle
• Note: 1/4” MPT Nozzle not included
• Weight: 2.72 lb

Suttner 38” ST-54 Dual Lance 4,500 PSI With Brass Soap Nozzle. For use when high and low pressures are needed. For example, spraying cleaning agents with low pressure through an injector valve (chemical injector required) and then cleaning with high pressure

Features
• Made In Germany - High Quality, German engineered components
• High or low pressure operation is controlled by twisting the side handle
• The side handle helps manage the lance with ease for longer working periods
• Threads are rolled on providing consistent sealing and four times the strength than cut threads
• Lance is equipped with 65° x #30 low pressure brass soap nozzle

Specifications
• Max Pressure: 4,500 PSI
• Length: 38”
• Max Temp: 300° F.
• Lance Material: Plated steel
• Inlet: 1/4" Male NPT
• Outlets: 1/4" Female NPT x 1/4” Soap Nozzle
• Note: 1/4” MPT Nozzle not included
• Weight: 2.72 lb

Suttner 38” ST-54.2 Stainless Steel Dual Lance 5,800 PSI With Brass Soap Nozzle and Nozzle Protectors. For use when high and low pressures are needed. For example, spraying cleaning agents with low pressure through an injector valve (chemical injector required) and then cleaning with high pressure

Features
• The serious high pressure spray contractors choice
• High Quality, German engineered components
• Stainless steel construction
• Features our comfortable ergonomic shaped cool & compact molded grip resistant to heat
• Suitable for corrosive chemicals
• Ergonomic side handle for easy Hi/Low pressure adjustment
• Premium dual-purpose lance that adds extreme versatility to your cleaning tools and accessories
• Lance is equipped with 65° x #30 low pressure brass soap nozzle
• Nozzle protectors included
• Optional stainless steel soap nozzle available

Specifications
• Max Pressure: 5,800 PSI
• Length: 38.5”
• Max Temp: 302° F.
• Lance & Valve Material: Stainless steel
• Inlet: 1/4" Male NPT
• Outlets: 1/4" Female NPT x 1/4” Soap Nozzle
• Note: 1/4” MPT Nozzle not included
• Weight: 3.20 lb

64 oz. Replacement Bottle for Suttner ST-73 & ST-73.2 Foamer

Suttner 7,200 PSI Triple Wire "Ultra High" Hose 3/8" x 150' Black. Designed for commercial high pressure cleaning applications

Features:
• Triple wire braided rubber hose
• Synthetic rubber abrasion resistant wrapped cover
• Commercial grade
• Heat resistant synthetic rubber inner tube

Specifications:
• Hose Inner Diameter: 3/8" ID
• Length: 150’
• Maximum Pressure: 7,200 PSI
• Braid: Triple wire
• Temp. Range: - 15° to + 250°
• Color: Black
• 3/8" MNPT connectors (Solid)
• Red bend restrictors on both ends
• Weight 46.75 Lbs.

Suttner 7,200 PSI Triple Wire "Ultra High" Hose 3/8" x 50' Black. Designed for commercial high pressure cleaning applications

Features:
• Triple wire braided rubber hose
• Synthetic rubber abrasion resistant wrapped cover
• Commercial grade
• Heat resistant synthetic rubber inner tube

Specifications:
• Hose Inner Diameter: 3/8" ID
• Length: 50’
• Maximum Pressure: 7,200 PSI
• Braid: Triple wire
• Temp. Range: - 15° to + 250°
• Color: Black
• 3/8" MNPT connectors (Solid)
• Red bend restrictors on both ends
• Weight 16.25 Lbs.

Lance Side Handle For Suttner 1/4" Metal Lances

Specifications:
• Helps manage the lance with ease and work longer hours
• #200009600 easily adjusts anywhere on a 1/4” metal lance for anyone's desired ergonomic position
• Note: Lance not included

Lance Side Handle For Suttner Molded Grip Lances

Specifications:
• #200009700 easily adjusts anywhere on a Suttner molded grip for anyone's desired ergonomic position
• Hand fits comfortably and secure around “star shaped” grip
• Note: Lance not included

Suttner ST-10 Nozzle Protector 1/4" F Black & Black

Features
• 2-Component nozzle protector ST-10
• The ST-10 is the ideal combination made out of hard and soft plastics
• The nozzle protector is suitable for cold and hot water applications in the car wash, agriculture and food industry
• The ST-10 is unimpeachable, protects your nozzles and preserves the surfaces to be cleaned at the same time

Specifications
• Suitable for nozzles 1/4" M NPT
• Material: Plastic / Zinc-plated steel
• Color: Black / black
• Max PSI: 5,800
• Max Temp: 300° F.
• Inlet:: 1/4" Female NPT
• Outlet: 1/4" Female NPT
• Note: 1/4” MPT Nozzle not included
• Weight: 0.10 lbs

Suttner ST-10 Nozzle Protector 1/4" F Black & Blue

Features
• 2-Component nozzle protector ST-10
• The ST-10 is the ideal combination made out of hard and soft plastics
• The nozzle protector is suitable for cold and hot water applications in the car wash, agriculture and food industry
• The ST-10 is unimpeachable, protects your nozzles and preserves the surfaces to be cleaned at the same time

Specifications
• Suitable for nozzles 1/4" M NPT
• Material: Plastic / Zinc-plated steel
• Color: Black / blue
• Max PSI: 5,800
• Max Temp: 300° F.
• Inlet:: 1/4" Female NPT
• Outlet: 1/4" Female NPT
• Note: 1/4” MPT Nozzle not included
• Weight: 0.10 lbs

Suttner ST-10 Nozzle Protector 1/4" F Black & Red

Features
• 2-Component nozzle protector ST-10
• The ST-10 is the ideal combination made out of hard and soft plastics
• The nozzle protector is suitable for cold and hot water applications in the car wash, agriculture and food industry
• The ST-10 is unimpeachable, protects your nozzles and preserves the surfaces to be cleaned at the same time

Specifications
• Suitable for nozzles 1/4" M NPT
• Material: Plastic / Zinc-plated steel
• Color: Black / red
• Max PSI: 5,800
• Max Temp: 300° F.
• Inlet:: 1/4" Female NPT
• Outlet: 1/4" Female NPT
• Note: 1/4” MPT Nozzle not included
• Weight: 0.10 lbs

Suttner ST-10 Nozzle Protector 1/4" F Grey & Black

Features
• 2-Component nozzle protector ST-10
• The ST-10 is the ideal combination made out of hard and soft plastics
• The nozzle protector is suitable for cold and hot water applications in the car wash, agriculture and food industry
• The ST-10 is unimpeachable, protects your nozzles and preserves the surfaces to be cleaned at the same time

Specifications
• Suitable for nozzles 1/4" M NPT
• Material: Plastic / Zinc-plated steel
• Color: Grey / black
• Max PSI: 5,800
• Max Temp: 300° F.
• Inlet:: 1/4" Female NPT
• Outlet: 1/4" Female NPT
• Note: 1/4” MPT Nozzle not included
• Weight: 0.10 lbs

Suttner ST-51.1 Variable Spray Nozzle 1/2" M 900 PSI. Nozzle-Twist: The jet can be changed from a conical, wide spray jet to a long-distance pencil jet.

Features
• Internal parts of the surge nozzle are made entirely of stainless stee
• Handwheel cover made of food-approved plastic
• Change the shape of the jet by simply turning the adjustable nozzle
• Adjustable cone sprays from 0° to 90°

Specifications
• Inlet: 1/2” M
• Maximum Pressure: 900 PSI
• Max. Flow Rate: 21 GPM
• Max. Temp.: 196º F.
• Weight: 0.39 lb

Suttner Stainless Steel Hose Hanger, Holds 120' of 1/2" hose. This food grade hose hanger is ideal for mounting to any vertical wall

Specifications:
• Polished stainless steel
• Food Grade
• Holds 175 ft of 3/8” hose
• Holds 120 ft of 1/2” hose
• Holds 90 ft of 3/4” hose
• Dimensions: 14-1/4” x 6-5/16” x 7-3/4”
• Weight: 2.0 lbs.

Suttner #15 ST-176 Stainless Steel 27.5” Foam Blaster Lance 3,625 PSI with 1/4" F Inlet. Switch from foam to rinse by turning the valve that’s conveniently within hands reach

Features
• The ST-176 Foam Blaster lance is the ideal accessory for Suttner's foam injector line. The innovative change-over technology allows to direct the full flow into either one or the other outlet pipe just by turning the hand wheel at the inlet
• In one position of the hand wheel the flow is directed thru an ST-76 foam blaster head for foaming. After changing over the full flow is directed thru the other pipe
• Includes 3 Injector nozzles
• Wash or rinse nozzle sold separately

Specifications
• Flow Rate: 6.0 – 16.0 GPM
• Max Pressure: 3,625 PSI
• Overall Length: ”
• Max Temp: 212° F.
• Inlet: 1/4" Female NPT
• Outlet (Foam): #15 ST-76 Foam Blaster head
• Outlet (Rinse): 1/4" Male (Nozzle not included)
• Note: Suttner (ST-160, ST-160M or St-164 Chemical or Foam injector) and rinse/wash nozzle required and are not included
• Weight: 3.45 lb

Please use Nozzle Chart to determine proper spray nozzle size

Nozzle Chart

Use Spray Nozzle Size and Foam Nozzle Chart to determine correct Air Injector Nozzle to use

Foam Nozzle Chart

Suttner #19.5 ST-176 Stainless Steel 27.5” Foam Blaster Lance 3,625 PSI with 1/4" F Inlet. Switch from foam to rinse by turning the valve that’s conveniently within hands reach

Features
• The ST-176 Foam Blaster lance is the ideal accessory for Suttner's foam injector line. The innovative change-over technology allows to direct the full flow into either one or the other outlet pipe just by turning the hand wheel at the inlet
• In one position of the hand wheel the flow is directed thru an ST-76 foam blaster head for foaming. After changing over the full flow is directed thru the other pipe
• Includes 3 Injector nozzles
• Wash or rinse nozzle sold separately

Specifications
• Flow Rate: 6.0 – 16.0 GPM
• Max Pressure: 3,625 PSI
• Overall Length: ”
• Max Temp: 212° F.
• Inlet: 1/4" Female NPT
• Outlet (Foam): #19.5 ST-76 Foam Blaster head
• Outlet (Rinse): 1/4" Male (Nozzle not included)
• Note: Suttner (ST-160, ST-160M or St-164 Chemical or Foam injector) and rinse/wash nozzle required and are not included
• Weight: 3.45 lb

Please use Nozzle Chart to determine proper spray nozzle size

Nozzle Chart

Use Spray Nozzle Size and Foam Nozzle Chart to determine correct Air Injector Nozzle to use

Foam Nozzle Chart

Suttner #30 ST-176 Stainless Steel 27.5” Foam Blaster Lance 3,625 PSI with 1/4" F Inlet. Switch from foam to rinse by turning the valve that’s conveniently within hands reach

Features
• The ST-176 Foam Blaster lance is the ideal accessory for Suttner's foam injector line. The innovative change-over technology allows to direct the full flow into either one or the other outlet pipe just by turning the hand wheel at the inlet
• In one position of the hand wheel the flow is directed thru an ST-76 foam blaster head for foaming. After changing over the full flow is directed thru the other pipe
• Includes 3 Injector nozzles
• Wash or rinse nozzle sold separately

Specifications
• Flow Rate: 6.0 – 16.0 GPM
• Max Pressure: 3,625 PSI
• Overall Length: ”
• Max Temp: 212° F.
• Inlet: 1/4" Female NPT
• Outlet (Foam): #30 ST-76 Foam Blaster head
• Outlet (Rinse): 1/4" Male (Nozzle not included)
• Note: Suttner (ST-160, ST-160M or St-164 Chemical or Foam injector) and rinse/wash nozzle required and are not included
• Weight: 3.45 lb

Please use Nozzle Chart to determine proper spray nozzle size

Nozzle Chart

Use Spray Nozzle Size and Foam Nozzle Chart to determine correct Air Injector Nozzle to use

Foam Nozzle Chart

Suttner #9 ST-176 Stainless Steel 27.5” Foam Blaster Lance 3,625 PSI with 1/4" F Inlet. Switch from foam to rinse by turning the valve that’s conveniently within hands reach

Features
• The ST-176 Foam Blaster lance is the ideal accessory for Suttner's foam injector line. The innovative change-over technology allows to direct the full flow into either one or the other outlet pipe just by turning the hand wheel at the inlet
• In one position of the hand wheel the flow is directed thru an ST-76 foam blaster head for foaming. After changing over the full flow is directed thru the other pipe
• Includes 3 Injector nozzles
• Wash or rinse nozzle sold separately

Specifications
• Flow Rate: 6.0 – 16.0 GPM
• Max Pressure: 3,625 PSI
• Overall Length: ”
• Max Temp: 212° F.
• Inlet: 1/4" Female NPT
• Outlet (Foam): #9 ST-76 Foam Blaster head
• Outlet (Rinse): 1/4" Male (Nozzle not included)
• Note: Suttner (ST-160, ST-160M or St-164 Chemical or Foam injector) and rinse/wash nozzle required and are not included
• Weight: 3.45 lb

Please use Nozzle Chart to determine proper spray nozzle size

Nozzle Chart

Use Spray Nozzle Size and Foam Nozzle Chart to determine correct Air Injector Nozzle to use

Foam Nozzle Chart