Annovi Reverberi - AR North America

Hydraulic Pump Specifications:
• Sauer-danfoss hydraulic driven pump
• Max. Motor GPM: 9.5
• Max. Motor PSI: 2,610 PSI
• Inlet & Outlet: 3/4"

Pressure Washer Pump Specifications:
• AR Model XWL50.09 solid shaft pump
• Max. Volume: 13.2 GPM
• Max. Discharge Pressure: 1,300 PSI
• Max. Fluid Temp.: 140° F.
• Inlet Ports (2): 3/4" F
• Discharge Ports (2): 3/8" F 
• Weight: 45.0 lb

Annovi Reverberi / AR North America RCAM025G15E-F8 RCAM E Version with F8 flange series misting pumps are designed to direct drive on electric NEMA 56 C motors ranging from 0.25 – 2.0 HP. This triplex plunger pump features the latest in design and technology. Life tested over 2,000 hours at maximum performance. The RCAM is a result of our combined 60 years of pumps building experience and expertise

Features
• Designed for heavy duty misting applications
• Latest in design and technology
• New crankcase style
• High strength forged brass manifold for long term use
• NEW ceramic plungers, thicker wall to help prevent thermal shock
• Stainless steel valves
• Side mount valve seat o-rings
• High quality high pressure seals
• NEW low pressure seal with built in scraper
• Two piece piston guides
• NEW connecting rod with 12% more load surface
• Large side cover sight glass
• Oversized bearings
• Rear cover oil drain
• Forged, precision ground crankshaft

Specifications
• Max. Volume: 0.25 GPM
• Max. Discharge Pressure: 1,500 PSI
• Max. Pump Speed: 1,750 RPM
• Shaft Diameter: 5/8” Hollow
• Max. Horsepower Requirements: 0.3 EBHP
• Max. Fluid Temp.: 140° F.
• Inlet Ports (2): 1/2" Female
• Outlet Ports (2): 3/8" Female
• Oil capacity: 9.81 oz
• Weight: 11.0 lb.

Features
• Designed for heavy duty misting applications
• Latest in design and technology
• New crankcase style
• High strength forged brass manifold for long term use
• NEW ceramic plungers, thicker wall to help prevent thermal shock
• Stainless steel valves
• Side mount valve seat o-rings
• High quality high pressure seals
• NEW low pressure seal with built in scraper
• Two piece piston guides
• NEW connecting rod with 12% more load surface
• Large side cover sight glass
• Oversized bearings
• Rear cover oil drain
• Forged, precision ground crankshaft

Specifications
• Max. Volume: 0.5 GPM
• Max. Discharge Pressure: 1,500 PSI
• Max. Pump Speed: 1,750 RPM
• Shaft Diameter: 5/8” Hollow
• Max. Horsepower Requirements: 0.5 EBHP
• Max. Fluid Temp.: 140° F.
• Inlet Ports (2): 1/2" Female
• Outlet Ports (2): 3/8" Female
• Oil capacity: 9.81 oz
• Weight: 11.0 lb.

Features
• Designed for heavy duty misting applications
• Latest in design and technology
• New crankcase style
• High strength forged brass manifold for long term use
• NEW ceramic plungers, thicker wall to help prevent thermal shock
• Stainless steel valves
• Side mount valve seat o-rings
• High quality high pressure seals
• NEW low pressure seal with built in scraper
• Two piece piston guides
• NEW connecting rod with 12% more load surface
• Large side cover sight glass
• Oversized bearings
• Rear cover oil drain
• Forged, precision ground crankshaft

Specifications
• Max. Volume: 1.0 GPM
• Max. Discharge Pressure: 1,500 PSI
• Max. Pump Speed: 1,750 RPM
• Shaft Diameter: 5/8” Hollow
• Max. Horsepower Requirements: 1.0 EBHP
• Max. Fluid Temp.: 140° F.
• Inlet Ports (2): 1/2" Female
• Outlet Ports (2): 3/8" Female
• Oil capacity: 9.81 oz
• Weight: 11.0 lb.

Features
• Designed for heavy duty misting applications
• Latest in design and technology
• New crankcase style
• High strength forged brass manifold for long term use
• NEW ceramic plungers, thicker wall to help prevent thermal shock
• Stainless steel valves
• Side mount valve seat o-rings
• High quality high pressure seals
• NEW low pressure seal with built in scraper
• Two piece piston guides
• NEW connecting rod with 12% more load surface
• Large side cover sight glass
• Oversized bearings
• Rear cover oil drain
• Forged, precision ground crankshaft

Specifications
• Max. Volume: 2.0 GPM
• Max. Discharge Pressure: 1,500 PSI
• Max. Pump Speed: 1,750 RPM
• Shaft Diameter: 5/8” Hollow
• Max. Horsepower Requirements: 2.0 EBHP
• Max. Fluid Temp.: 140° F.
• Inlet Ports (2): 1/2" Female
• Outlet Ports (2): 3/8" Female
• Oil capacity: 9.81 oz
• Weight: 11.0 lb.

Features:
• Constructed with die-cast bodies and feature a brass head
• Internal components include special thick solid ceramic plungers for long life and durability
• Precision cast cooling fins are anodized for maximum heat dissipation
• Oversized needle bearings on the drive side, and ball bearing on the non-drive side assure positive proper shaft alignment and maximum life
• One-piece connecting rods are special alloy aluminum, oversized for strength and load disbursement

Specifications:
• Direct Drive with Electric Flange NEMA 56C
• Max. Volume: 2.1 GPM
• Max. Discharge Pressure: 1,800 PSI
• Max. Pump Speed: 1750 RPM
• Shaft Diameter: 5/8” Hollow
• Minimum Horsepower Requirements: 2.5 BHP
• Max. Fluid Temp.: 160 degrees F.
• Inlet Ports (2): 1/2" BSP
• Discharge Ports (2): 3/8" BSP
• Drive Side: Standard right
• Forged brass head & valve covers
• Solid ceramic plungers
• Weight: 10.0 lb

Specifications
• Max. Volume: 36.0 GPM
• Max. Discharge Pressure: 1,500 PSI
• Max. Pump Speed: 800 RPM
• Shaft Diameter: 35mm Solid
• Maximum Horsepower Requirements: 27.6 EBHP
• Max. Fluid Temp.: 140º F.
• Inlet Port: 1-1/2" Female
• Discharge Port: 1" Female
• Drive Side: Standard right
• Weight: 198.0 lb.
• Ship via truck

Features
• Latest in design and technology
• New crankcase style
• High strength forged brass manifold for long term use
• NEW ceramic plungers, thicker wall to help prevent thermal shock
• Stainless steel valves
• Side mount valve seat o-rings
• High quality high pressure seals
• NEW low pressure seal with built in scraper
• Two piece piston guides
• NEW connecting rod with 12% more load surface
• Large side cover sight glass
• Oversized bearings
• Rear cover oil drain
• Forged, precision ground crankshaft

Specifications
• Max. Volume: 3.5 GPM
• Max. Discharge Pressure: 1,600 PSI
• Max. Pump Speed: 1,750 RPM
• Shaft Diameter: 5/8” Hollow
• Max. Horsepower Requirements: 3.8 EBHP
• Max. Fluid Temp.: 140° F.
• Inlet Ports (2): 1/2" Female
• Outlet Ports (2): 3/8" Female
• Oil capacity: 9.81 oz
• Weight: 11.0 lb.

Hydraulic Pump Specifications:
• Sauer-danfoss hydraulic driven pump
• Max. Motor GPM: 18.5
• Max. Motor PSI: 3,046 PSI
• Inlet & Outlet: 3/4"

Pressure Washer Pump Specifications:
• AR Model RTX100 solid shaft pump
• Max. Volume: 26.4 GPM
• Max. Discharge Pressure: 1,740 PSI
• Max. Pump Speed: 1,450 RPM
• Max. Fluid Temp.: 140° F.
• Inlet Ports (2): 1" F
• Discharge Ports (2): 1/2" F
• Weight: 93.7 lb

The Annovi Reverberi XMA25G18E-F33, E version 5/8" hollow shaft triplex pump is ready for direct or pulley driving. This pump is manufactured with a brass pump head suitable for a wide range of conditions. The XMA25G18E-F33 can produce up to 1800 Max PSI, 2.5 Max GPM, and is designed to operate at 1750 RPM. Constructed with frictionless aluminum connecting rods and ceramic pistons, the XMA25G18E-F33 weighs in at 15 lbs and boasts a sleek compact design

• Direct Drive with Electric Flange NEMA 56C
• Max. Volume: 2.5 GPM
• Max. Discharge Pressure: 1,800 PSI
• Max. Pump Speed: 1750 RPM
• Shaft Diameter: 5/8” Hollow
• Minimum Horsepower Requirements: 3.0 EBHP
• Max. Fluid Temp.: 140 degrees F.
• Inlet Ports (2): 1/2" BSP
• Discharge Ports (2): 3/8" BSP
• Drive Side: Standard right
• Forged brass head & valve covers
• Solid ceramic plungers
• Weight: 15.0 lb

Features:
• High-strength, non-porous pressed nickel-plated brass head for guaranteed safety and durability
• One-piece extra thick ceramic pistons for exceptional strength
• Stainless steel ball-type intake and delivery valves with high fluido-dynamic efficiency
• Dual sealing system with anti-extrusion ring support and lubrication with low pressure recirculation chambers
• Pump casing in high-strength aluminum alloy with oversized mounts
• Camshaft in forged, treated steel
• Oversized two-piece connecting-rods in low-friction aluminum alloy
• “Premium” quality tapered roller bearings for long lifetime
• Splash lubrication

Specifications:
• Max. Volume: 26.4 GPM
• Max. Discharge Pressure: 1,800 PSI
• Max. Pump Speed: 1,450 RPM
• Shaft Diameter: 30mm Solid
• Max. Horsepower Requirements: 33.0 EBHP
• Max. Fluid Temp.: 140° F.
• Inlet Tread: 1" Female
• Outlet Thread: 1/2" Female
• Oil capacity: 76 oz
• Weight: 72.0 lb.

The Annovi Reverberi XMA3G18E-F33, E version 5/8" hollow shaft triplex pump is ready for direct or pulley driving. This pump is manufactured with a brass pump head suitable for a wide range of conditions. The XMA3G18E-F33 can produce up to 1800 Max PSI, 3 Max GPM, and is designed to operate at 1750 RPM. Constructed with frictionless aluminum connecting rods and ceramic pistons, the XMA3G18E-F33 weighs in at 15 lbs and boasts a sleek compact design

• Direct Drive with Electric Flange NEMA 56C
• Max. Volume: 3.0 GPM
• Max. Discharge Pressure: 1,800 PSI
• Max. Pump Speed: 1750 RPM
• Shaft Diameter: 5/8” Hollow
• Minimum Horsepower Requirements: 4.0 EBHP
• Max. Fluid Temp.: 140 degrees F.
• Inlet Ports (2): 1/2" BSP
• Discharge Ports (2): 3/8" BSP
• Drive Side: Standard right
• Forged brass head & valve covers
• Solid ceramic plungers
• Weight: 15.0 lb

Annovi Reverberi AR XWT2118N solid shaft triplex plunger pump is rated up to 5.55 GPM at max 2,900 PSI spins a 24mm solid shaft at 500 RPM using a 3/4”F inlet and 3/8"F discharge thread.

Specifications:
• Solid Shaft for Belt or Gear Drive
• Max. Volume: 5.55 GPM
• Max. Discharge Pressure: 2,900 PSI
• Max. Pump Speed: 500 RPM
• Shaft Diameter: 24mm Solid
• Max. Horsepower Requirements: 11.0 EBHP
• Bearings are premium SKF tapered roller bearings that provide extra load support, smoother and lower crankcase running temperatures and overall extended pump life
• Max. Fluid Temp.: 160 degrees F.
• Inlet Ports (2): 3/4" BSP
• Discharge Ports (2): 3/8" BSP
• Drive Side: Standard right
• Forged brass head & valve covers
• Plungers are extra thick solid ceramic titanium impregnated for extended seal and pump life
• Weight: 34.0 lb.

Features
• They are constructed of die-cast bodies and feature a nickel plated forged brass head
• Internal components include special thick solid ceramic plungers for long life and durability
• Precision cast cooling fins are anodized for maximum heat dissipation
• Oversized tapered roller bearings and the precision supports assure proper shaft alignment and maximum life
• Valve cages of special designed Ultra-Form provide positive seating and extended life
• One-piece connecting rods are oversized for strength and load disbursement

Specifications
• Max. Volume: 6.6 GPM
• Max. Discharge Pressure: 2,000 PSI
• Max. Pump Speed: 1,750 RPM
• Shaft Diameter: 24mm Solid
• Maximum Horsepower Requirements: 9.0 EBHP
• Max. Fluid Temp.: 140º F.
• Inlet Ports (2): 1/2" FPT
• Discharge Ports (2): 3/8" FPT
• Drive Side: Standard right
• Weight: 20.0 lb.

Features
• They are constructed of die-cast bodies and feature a nickel plated forged brass head
• Internal components include special thick solid ceramic plungers for long life and durability
• Precision cast cooling fins are anodized for maximum heat dissipation
• Oversized tapered roller bearings and the precision supports assure proper shaft alignment and maximum life
• Valve cages of special designed Ultra-Form provide positive seating and extended life
• One-piece connecting rods are oversized for strength and load disbursement

Specifications
• Max. Volume: 7.1 GPM
• Max. Discharge Pressure: 2,000 PSI
• Max. Pump Speed: 1,750 RPM
• Shaft Diameter: 24mm Solid
• Maximum Horsepower Requirements: 10.0 EBHP
• Max. Fluid Temp.: 140º F.
• Inlet Ports (2): 1/2" FPT
• Discharge Ports (2): 3/8" FPT
• Drive Side: Standard right
• Weight: 20.0 lb.

Hydraulic Pump Specifications:
• Sauer-danfoss hydraulic driven pump
• Max. Motor GPM: 18.5
• Max. Motor PSI: 2,610 PSI
• Inlet & Outlet: 3/4"

Pressure Washer Pump Specifications:
• AR Model RTX70 solid shaft pump
• Max. Volume: 18.5 GPM
• Max. Discharge Pressure: 2,200 PSI
• Max. Pump Speed: 1,450 RPM
• Max. Fluid Temp.: 140° F.
• Inlet Ports (2): 1" F
• Discharge Ports (2): 1/2" F
• Weight: 93.7 lb

Hydraulic Pump Specifications:
• Sauer-danfoss hydraulic driven pump
• Max. Motor GPM: 18.5
• Max. Motor PSI: 3,265 PSI
• Inlet & Outlet: 3/4"

Pressure Washer Pump Specifications:
• AR Model RTX85 solid shaft pump
• Max. Volume: 22.5 GPM
• Max. Discharge Pressure: 2,200 PSI
• Max. Pump Speed: 1,450 RPM
• Max. Fluid Temp.: 140° F.
• Inlet Ports (2): 1" F
• Discharge Ports (2): 1/2" F
• Weight: 93.7 lb

Hydraulic Pump Specifications:
• Sauer-danfoss hydraulic driven pump
• Max. Motor GPM: 7.7
• Max. Motor PSI: 2,538 PSI
• Inlet & Outlet: 1/2"

Pressure Washer Pump Specifications:
• AR Model RK21.15 solid shaft pump
• Max. Volume: 5.5 GPM
• Max. Discharge Pressure: 2,200 PSI
• Max. Pump Speed: 1,450 RPM
• Max. Fluid Temp.: 140° F.
• Inlet Ports (2): 1/2" F
• Discharge Ports (2): 3/8" F 
• Weight: 31.0 lb

Features
• Latest in design and technology
• New crankcase style
• High strength forged brass manifold for long term use
• NEW ceramic plungers, thicker wall to help prevent thermal shock
• Stainless steel valves
• Side mount valve seat o-rings
• High quality high pressure seals
• NEW low pressure seal with built in scraper
• Two piece piston guides
• NEW connecting rod with 12% more load surface
• Large side cover sight glass
• Oversized bearings
• Rear cover oil drain
• Forged, precision ground crankshaft

Specifications
• Max. Volume: 2.0 GPM
• Max. Discharge Pressure: 2,200 PSI
• Max. Pump Speed: 1,750 RPM
• Shaft Diameter: 5/8” Hollow
• Max. Horsepower Requirements: 3.0 EBHP
• Max. Fluid Temp.: 140° F.
• Inlet Ports (2): 1/2" Female
• Outlet Ports (2): 3/8" Female
• Oil capacity: 9.81 oz
• Weight: 11.0 lb.

Features
• Latest in design and technology
• New crankcase style
• High strength forged brass manifold for long term use
• NEW ceramic plungers, thicker wall to help prevent thermal shock
• Stainless steel valves
• Side mount valve seat o-rings
• High quality high pressure seals
• NEW low pressure seal with built in scraper
• Two piece piston guides
• NEW connecting rod with 12% more load surface
• Large side cover sight glass
• Oversized bearings
• Rear cover oil drain
• Forged, precision ground crankshaft

Specifications
• Max. Volume: 2.0 GPM
• Max. Discharge Pressure: 2,200 PSI
• Max. Pump Speed: 3,400 RPM
• Shaft Diameter: 3/4” Hollow
• Max. Horsepower Requirements: 4.0 GHP
• Max. Fluid Temp.: 140° F.
• Inlet Ports (2): 1/2" Female
• Outlet Ports (2): 3/8" Female
• Oil capacity: 9.81 oz
• Weight: 11.0 lb.

Features
• Latest in design and technology
• New crankcase style
• High strength forged brass manifold for long term use
• NEW ceramic plungers, thicker wall to help prevent thermal shock
• Stainless steel valves
• Side mount valve seat o-rings
• High quality high pressure seals
• NEW low pressure seal with built in scraper
• Two piece piston guides
• NEW connecting rod with 12% more load surface
• Large side cover sight glass
• Oversized bearings
• Rear cover oil drain
• Forged, precision ground crankshaft

Specifications
• Max. Volume: 2.0 GPM
• Max. Discharge Pressure: 2,200 PSI
• Max. Pump Speed: 1,750 RPM
• Shaft Diameter: 5/8” Hollow
•Drive Side: Left
• Max. Horsepower Requirements: 3.0 EBHP
• Max. Fluid Temp.: 140° F.
• Inlet Ports (2): 1/2" Female
• Outlet Ports (2): 3/8" Female
• Oil capacity: 9.81 oz
• Weight: 11.0 lb.

Features:
• High-strength, non-porous pressed nickel-plated brass head for guaranteed safety and durability
• One-piece extra thick ceramic pistons for exceptional strength
• Stainless steel ball-type intake and delivery valves with high fluido-dynamic efficiency
• Dual sealing system with anti-extrusion ring support and lubrication with low pressure recirculation chambers
• Pump casing in high-strength aluminum alloy with oversized mounts
• Camshaft in forged, treated steel
• Oversized two-piece connecting-rods in low-friction aluminum alloy
• “Premium” quality tapered roller bearings for long lifetime
• Splash lubrication

Specifications:
• Max. Volume: 22.5 GPM
• Max. Discharge Pressure: 2,200 PSI
• Max. Pump Speed: 1,450 RPM
• Shaft Diameter: 30mm Solid
• Max. Horsepower Requirements: 27.0 EBHP
• Max. Fluid Temp.: 140° F.
• Inlet Tread: 1" Female
• Outlet Thread: 1/2" Female
• Oil capacity: 76 oz
• Weight: 72.0 lb.

Features
• Manifold: Nickel plated forged brass.
• Plungers: Special thick solid ceramic for long life, strong durability and more resilience.
• Bearings: Oversized tapered roller bearing for maximum life and load disbursement.
• Crankcase: Precision die-cast, large cooling fins and anodized for maximum heat dissipation.
• Valve, Seat and Springs: Stainless steel with specially designed ultra form material.
• Seals and V-Packing: 185º Viton high temperature machined.
• Plunger Rods: High strength stainless steel construction.
• Connecting Rods: One-piece bronze for higher pressure, oversized for maximum strength, load disbursement, and life. Heavy pin area construction, for added load strength.

Specifications
• Max. Volume: 3.96 GPM
• Max. Discharge Pressure: 2,200 PSI
• Max. Pump Speed: 1,450 RPM
• Shaft Diameter: 24mm Solid
• Maximum Horsepower Requirements: 5.5 BHP
• Max. Fluid Temp.: 185º F.
• Inlet Ports (2): 1/2" FPT
• Discharge Ports (2): 3/8" FPT
• Drive Side: Standard right
• Weight: 20.0 lb.

Features
• They are constructed of die-cast bodies and feature a nickel plated forged brass head
• Internal components include special thick solid ceramic plungers for long life and durability
• Precision cast cooling fins are anodized for maximum heat dissipation
• Oversized tapered roller bearings and the precision supports assure proper shaft alignment and maximum life
• Valve cages of special designed Ultra-Form provide positive seating and extended life
• One-piece connecting rods are oversized for strength and load disbursement

Specifications
• Max. Volume: 6.34 GPM
• Max. Discharge Pressure: 2,200 PSI
• Max. Pump Speed: 1,450 RPM
• Shaft Diameter: 24mm Solid
• Maximum Horsepower Requirements: 11.0 EBHP
• Max. Fluid Temp.: 140º F.
• Inlet Ports (2): 1/2" FPT
• Discharge Ports (2): 3/8" FPT
• Drive Side: Standard right
• Weight: 20.0 lb.

Features:
• Latest in design and technology
• New crankcase style
• High strength forged brass manifold for long term use
• NEW ceramic plungers, thicker wall to help prevent thermal shock
• Stainless steel valves
• Side mount valve seat o-rings
• High quality high pressure seals
• NEW low pressure seal with built in scraper
• Two piece piston guides
• NEW connecting rod with 12% more load surface
• Large side cover sight glass
• Oversized bearings
• Rear cover oil drain
• Forged, precision ground crankshaft

Specifications:
• Max. Volume: 4.8 GPM
• Max. Discharge Pressure: 2,320 PSI
• Max. Pump Speed: 1,450 RPM
• Shaft Diameter: 24mm Solid
• Max. Horsepower Requirements: 7.6 EBHP
• Max. Fluid Temp.: 140° F.
• Inlet Ports (2): 1/2" Female
• Outlet Ports (2): 3/8" Female
• Oil capacity: 13.35 oz
• Weight: 17.0 lb.

This Annovi Reverberi / AR North America RMW2.2G24-EZ-SX, RMW22G24-EZ-SX aluminum vertical plunger pump will pump up to 2.2 GPM at 2,400 PSI. It spins at 3400 RPM in a direct drive system coupled with a gasoline engine. The matching flange provides convenient connection to most 7/8” shaft 4 - 7 HP engines. The hollow shafted pump includes a built-in pressure control valve, and chemical injection system. Comes with Thermal Relief Valve and Easy Start Valve (EZ).

Features:
• 3-Piston alternating volumetric pumps for use on cleaning units
• Check the HOLE in the ARM location relative to the inlet/outlet Port (2nd Picture)
• This SX pump is Back Mounted - 180º rotated shaft configuration (3rd picture)
• Pump body in die-cast aluminum alloy
• Pistons driven by swash plate mechanism
• Two bearing systems, to support the pump shaft and pistons
• Pistons in hardened and tempered steel
• Pump head in aluminum
• Double gasket sealing system
• Intake valves fitted above the pistons for greater efficiency
• Integral regulating valve
• Integral detergent suction system

Specifications:
• Max. Volume: 2.2 GPM
• Max. Discharge Pressure: 2,400 PSI
• Max. Pump Speed: 3,400 RPM
• Shaft Diameter: 7/8” Hollow
• Maximum Horsepower Requirements (Industrial): 4.8 GHP
• Maximum Horsepower Requirements (Standard): 5.9 GHP
• Inlet Port: 3/4" GHA (garden hose)
• Outlet Port: 22mm-14 (Twist Connect)
• Weight: 7.3 lb.

This Annovi Reverberi / AR North America RMW2.2G24-EZ, RMW22G24-EZ aluminum vertical plunger pump will pump up to 2.2 GPM at 2,400 PSI. It spins at 3400 RPM in a direct drive system coupled with a gasoline engine. The matching flange provides convenient connection to most 7/8” shaft 4 - 7 HP engines. The hollow shafted pump includes a built-in pressure control valve, and chemical injection system. Comes with Thermal Relief Valve and Easy Start Valve (EZ).

Features:
• 3-Piston alternating volumetric pumps for use on cleaning units
• Check the HOLE in the ARM location relative to the inlet/outlet Port (2nd Picture)
• This pump is Front Mounted (3rd picture)
• Pump body in die-cast aluminum alloy
• Pistons driven by swash plate mechanism
• Two bearing systems, to support the pump shaft and pistons
• Pistons in hardened and tempered steel
• Pump head in aluminum
• Double gasket sealing system
• Intake valves fitted above the pistons for greater efficiency
• Integral regulating valve
• Integral detergent suction system

Specifications:
• Max. Volume: 2.2 GPM
• Max. Discharge Pressure: 2,400 PSI
• Max. Pump Speed: 3,400 RPM
• Shaft Diameter: 7/8” Hollow
• Maximum Horsepower Requirements (Industrial): 4.8 GHP
• Maximum Horsepower Requirements (Standard): 5.9 GHP
• Inlet Port: 3/4" GHA (garden hose)
• Outlet Port: 22mm-14 (Twist Connect)
• Weight: 7.3 lb.

This Annovi Reverberi / AR North America RMV2.5G24D / RMV25G24D horizontal plunger pump. 2.5 GPM at 2,400 PSI, spins at 3,400 RPM in a direct drive system coupled with a gasoline engine. The matching flange provides convenient connection to most 3/4” shaft 4 - 7 HP engines. The hollow shafted pump includes a built-in pressure control valve and chemical injection system. Comes with Thermal Relief Valve and Easy Start Valve (EZ)

Features:
• 3-Piston alternating volumetric pumps for use on cleaning units
• Can be directly coupled to gas engine flange
• Fits most homeowner type horizontal pressure washers
• Horizontal Mount with Gas Flange 3-6 HP (2-9/16 center to center)
• Pump body in die-cast aluminum alloy
• Pistons driven by swash plate mechanism
• Two bearing systems, to support the pump shaft and pistons
• Pistons in hardened and tempered steel
• Pump head in aluminum
• Double gasket sealing system
• Intake valves fitted above the pistons for greater efficiency
• Integral regulating valve
• Integral detergent suction system

Specifications:
• Max. Volume: 2.5 GPM
• Max. Discharge Pressure: 2,400 PSI
• Max. Pump Speed: 3,400 RPM
• Shaft Diameter: 3/4” Hollow
• Maximum Horsepower Requirements: 5.45 GHP
• Inlet Port: 3/4" GHA (garden hose)
• Outlet Port: 22mm-14 (Twist Connect)
• Weight: 4.65 lb.

Features:
• Check the HOLE in the ARM location relative to the inlet/outlet Port (2nd Picture)
• Fits most homeowner type vertical pressure washers with Front Mounted Pump (see 3rd image)
• NOTE: This Pump DOES NOT fit Karcher units using a hex head bolt to drive the pump.

Specifications:
• Vertical Mount with Gas Flange 3-7 HP
• Note: This pump is Front Mounted
• Max. Volume: 2.0 GPM
• Max. Discharge Pressure: 2,500 PSI
• Max. Pump Speed: 3,400 RPM
• Shaft Diameter: 7/8” Hollow
• Built In unloader and chemical injector
• Maximum Horsepower Requirements: 4.5 GHP
• Inlet Port: 3/4" FGH (garden hose)
• Outlet Port: 22mm (Twist Connect)
• Auxiliary Port: 1/4” FPT
• Brass manifold
• Stainless steel plungers
• Pump comes with oil
• See optional items below or in our store
• Note: Engine shafts longer that 2” will require spacers or washers
• Weight: 7.7lb.

Specifications
• Fits most homeowner type horizontal pressure washers
• Horizontal Mount with Gas Flange 3-6.8 HP (2-9/16 center to center)
• Max. Volume: 2.0 GPM
• Max. Discharge Pressure: 2,500 PSI
• Max. Pump Speed: 3,400 RPM
• Shaft Diameter: 3/4” Hollow
• Maximum Horsepower Requirements: 6.82 GHP
• Inlet Port: 3/4" FGH (garden hose)
• Outlet Port: 22mm (Twist Connect)
• Built In unloader and chemical injector
• Brass manifold
• Stainless steel plungers
• Replaces RMV2G20D
• Weight: 7.5 lb.

Features
• Latest in design and technology
• New crankcase style
• High strength forged brass manifold for long term use
• NEW ceramic plungers, thicker wall to help prevent thermal shock
• Stainless steel valves
• Side mount valve seat o-rings
• High quality high pressure seals
• NEW low pressure seal with built in scraper
• Two piece piston guides
• NEW connecting rod with 12% more load surface
• Large side cover sight glass
• Oversized bearings
• Rear cover oil drain
• Forged, precision ground crankshaft

Specifications
• Max. Volume: 2.0 GPM
• Max. Discharge Pressure: 2,500 PSI
• Max. Pump Speed: 3,400 RPM
• Shaft Diameter: 5/8” Hollow
• Max. Horsepower Requirements: 3.4 EBHP
• Max. Fluid Temp.: 140° F.
• Inlet Ports (2): 1/2" Female
• Outlet Ports (2): 3/8" Female
• Oil capacity: 9.81 oz
• Weight: 11.0 lb.

Annovi Reverberi / AR North America RCV E Left Handed Version with F8 flange series pumps are designed to direct drive on electric NEMA 56 C motors ranging from 1.5 – 6.0 HP. Intended use for heavy tasks; this triplex plunger pump features the latest in design and technology. Life tested over 2,000 hours at maximum performance. The RCV is a result of our combined 60 years of pumps building experience and expertise

Features
• Latest in design and technology
• New crankcase style
• High strength forged brass manifold for long term use
• NEW ceramic plungers, thicker wall to help prevent thermal shock
• Stainless steel valves
• Side mount valve seat o-rings
• High quality high pressure seals
• NEW low pressure seal with built in scraper
• Two piece piston guides
• NEW connecting rod with 12% more load surface
• Large side cover sight glass
• Oversized bearings
• Rear cover oil drain
• Forged, precision ground crankshaft

Specifications
• Max. Volume: 2.0 GPM
• Max. Discharge Pressure: 2,500 PSI
• Max. Pump Speed: 3,400 RPM
• Shaft Diameter: 5/8” Hollow
• Drive Side: Left
• Max. Horsepower Requirements: 3.4 EBHP
• Max. Fluid Temp.: 140° F.
• Inlet Ports (2): 1/2" Female
• Outlet Ports (2): 3/8" Female
• Oil capacity: 9.81 oz
• Weight: 11.0 lb.

Features:
• Check the HOLE in the ARM location relative to the inlet/outlet Port (2nd Picture)
• Fits most homeowner type vertical pressure washers with Front Mounted Pump (see 3rd image)
• NOTE: This Pump DOES NOT fit Karcher units using a hex head bolt to drive the pump.

Specifications:
• Vertical Mount with Gas Flange 3-7 HP
• Note: This pump is Front Mounted
• Max. Volume: 2.5 GPM
• Max. Discharge Pressure: 2,500 PSI
• Max. Pump Speed: 3,400 RPM
• Shaft Diameter: 7/8” Hollow
• Built In unloader and chemical injector
• Maximum Horsepower Requirements: 5.8 GHP
• Inlet Port: 3/4" FGH (garden hose)
• Outlet Port: 22mm (Twist Connect)
• Auxiliary Port: 1/4” FPT
• Brass manifold
• Stainless steel plungers
• Pump comes with oil
• See optional items below or in our store
• Note: Engine shafts longer that 2” will require spacers or washers
• Weight: 7.7lb.

Features
• Latest in design and technology
• New crankcase style
• High strength forged brass manifold for long term use
• NEW ceramic plungers, thicker wall to help prevent thermal shock
• Stainless steel valves
• Side mount valve seat o-rings
• High quality high pressure seals
• NEW low pressure seal with built in scraper
• Two piece piston guides
• NEW connecting rod with 12% more load surface
• Large side cover sight glass
• Oversized bearings
• Rear cover oil drain
• Forged, precision ground crankshaft

Specifications
• Max. Volume: 2.5 GPM
• Max. Discharge Pressure: 2,500 PSI
• Max. Pump Speed: 1,750 RPM
• Shaft Diameter: 24mm Solid
• Max. Horsepower Requirements: 4.3 EBHP
• Max. Fluid Temp.: 140° F.
• Inlet Ports (2): 1/2" Female
• Outlet Ports (2): 3/8" Female
• Oil capacity: 9.81 oz
• Weight: 10.0 lb.

Features:
• Manifold: Nickel plated forged brass.
• Plungers: Special thick solid ceramic for long life, strong durability and more resilience.
• Bearings: Oversized for maximum life and load disbursement, needle bearing on the drive side and ball on the non-drive side.
• Crankcase: Precision die-cast, large cooling fins and anodized for maximum heat dissipation.
• Valve, Seat and Springs: Stainless steel with specially designed ultra form material.
• Seals and V-Packing: 185º Viton high temperature machined.
• Plunger Rods: High strength stainless steel construction.
• Connecting Rods: One-piece bronze special alloy aluminum based, oversized for maximum strength, load disbursement, and life. Heavy pin area construction, for added load strength.

Specifications:
• Max. Volume: 2.9 GPM
• Max. Discharge Pressure: 2,500 PSI
• Max. Pump Speed: 1,450 RPM
• Shaft Diameter: 24mm Solid
• Maximum Horsepower Requirements: 5.0 BHP
• Max. Fluid Temp.: 185º F.
• Inlet Ports (2): 1/2" FPT
• Discharge Ports (2): 3/8" FPT
• Drive Side: Standard right
• Weight: 14.0 lb.

Features
• Latest in design and technology
• New crankcase style
• High strength forged brass manifold for long term use
• NEW ceramic plungers, thicker wall to help prevent thermal shock
• Stainless steel valves
• Side mount valve seat o-rings
• High quality high pressure seals
• NEW low pressure seal with built in scraper
• Two piece piston guides
• NEW connecting rod with 12% more load surface
• Large side cover sight glass
• Oversized bearings
• Rear cover oil drain
• Forged, precision ground crankshaft

Specifications
• Max. Volume: 3.0 GPM
• Max. Discharge Pressure: 2,500 PSI
• Max. Pump Speed: 1,750 RPM
• Shaft Diameter: 5/8” Hollow
• Max. Horsepower Requirements: 5.1 EBHP
• Max. Fluid Temp.: 140° F.
• Inlet Ports (2): 1/2" Female
• Outlet Ports (2): 3/8" Female
• Oil capacity: 9.81 oz
• Weight: 11.0 lb.

Features
• Latest in design and technology
• New crankcase style
• High strength forged brass manifold for long term use
• NEW ceramic plungers, thicker wall to help prevent thermal shock
• Stainless steel valves
• Side mount valve seat o-rings
• High quality high pressure seals
• NEW low pressure seal with built in scraper
• Two piece piston guides
• NEW connecting rod with 12% more load surface
• Large side cover sight glass
• Oversized bearings
• Rear cover oil drain
• Forged, precision ground crankshaft

Specifications
• Max. Volume: 3.0 GPM
• Max. Discharge Pressure: 2,500 PSI
• Max. Pump Speed: 3,400 RPM
• Shaft Diameter: 5/8” Hollow
• Max. Horsepower Requirements: 5.1 EBHP
• Max. Fluid Temp.: 140° F.
• Inlet Ports (2): 1/2" Female
• Outlet Ports (2): 3/8" Female
• Oil capacity: 9.81 oz
• Weight: 11.0 lb.

Features
• Latest in design and technology
• New crankcase style
• High strength forged brass manifold for long term use
• NEW ceramic plungers, thicker wall to help prevent thermal shock
• Stainless steel valves
• Side mount valve seat o-rings
• High quality high pressure seals
• NEW low pressure seal with built in scraper
• Two piece piston guides
• NEW connecting rod with 12% more load surface
• Large side cover sight glass
• Oversized bearings
• Rear cover oil drain
• Forged, precision ground crankshaft

Specifications
• Max. Volume: 3.0 GPM
• Max. Discharge Pressure: 2,500 PSI
• Max. Pump Speed: 1,750 RPM
• Shaft Diameter: 24mm Solid
• Max. Horsepower Requirements: 5.1 EBHP
• Max. Fluid Temp.: 140° F.
• Inlet Ports (2): 1/2" Female
• Outlet Ports (2): 3/8" Female
• Oil capacity: 9.81 oz
• Weight: 10.0 lb.

Features
• Latest in design and technology
• New crankcase style
• High strength forged brass manifold for long term use
• NEW ceramic plungers, thicker wall to help prevent thermal shock
• Stainless steel valves
• Side mount valve seat o-rings
• High quality high pressure seals
• NEW low pressure seal with built in scraper
• Two piece piston guides
• NEW connecting rod with 12% more load surface
• Large side cover sight glass
• Oversized bearings
• Rear cover oil drain
• Forged, precision ground crankshaft

Specifications
• Max. Volume: 3.2 GPM
• Max. Discharge Pressure: 2,500 PSI
• Max. Pump Speed: 1,450 RPM
• Shaft Diameter: 24mm Solid
• Max. Horsepower Requirements: 5.5 EBHP
• Max. Fluid Temp.: 140° F.
• Inlet Ports (2): 1/2" Female
• Outlet Ports (2): 3/8" Female
• Oil capacity: 9.81 oz
• Weight: 10.0 lb.

Features
• Latest in design and technology
• New crankcase style
• High strength forged brass manifold for long term use
• NEW ceramic plungers, thicker wall to help prevent thermal shock
• Stainless steel valves
• Side mount valve seat o-rings
• High quality high pressure seals
• NEW low pressure seal with built in scraper
• Two piece piston guides
• NEW connecting rod with 12% more load surface
• Large side cover sight glass
• Oversized bearings
• Rear cover oil drain
• Forged, precision ground crankshaft

Specifications
• Max. Volume: 3.4 GPM
• Max. Discharge Pressure: 2,500 PSI
• Max. Pump Speed: 1,450 RPM
• Shaft Diameter: 24mm Solid
• Max. Horsepower Requirements: 5.8 EBHP
• Max. Fluid Temp.: 140° F.
• Inlet Ports (2): 1/2" Female
• Outlet Ports (2): 3/8" Female
• Oil capacity: 9.81 oz
• Weight: 10.0 lb.

Features
• Latest in design and technology
• New crankcase style
• High strength forged brass manifold for long term use
• NEW ceramic plungers, thicker wall to help prevent thermal shock
• Stainless steel valves
• Side mount valve seat o-rings
• High quality high pressure seals
• NEW low pressure seal with built in scraper
• Two piece piston guides
• NEW connecting rod with 12% more load surface
• Large side cover sight glass
• Oversized bearings
• Rear cover oil drain
• Forged, precision ground crankshaft

Specifications
• Max. Volume: 3.5 GPM
• Max. Discharge Pressure: 2,500 PSI
• Max. Pump Speed: 3,400 RPM
• Shaft Diameter: 3/4” Hollow
• Max. Horsepower Requirements: 7.95 GHP
• Max. Fluid Temp.: 140° F.
• Inlet Ports (2): 1/2" Female
• Outlet Ports (2): 3/8" Female
• Oil capacity: 9.81 oz
• Weight: 11.0 lb.

Features
• Latest in design and technology
• New crankcase style
• High strength forged brass manifold for long term use
• NEW ceramic plungers, thicker wall to help prevent thermal shock
• Stainless steel valves
• Side mount valve seat o-rings
• High quality high pressure seals
• NEW low pressure seal with built in scraper
• Two piece piston guides
• NEW connecting rod with 12% more load surface
• Large side cover sight glass
• Oversized bearings
• Rear cover oil drain
• Forged, precision ground crankshaft

Specifications
• Max. Volume: 3.5 GPM
• Max. Discharge Pressure: 2,500 PSI
• Max. Pump Speed: 1,750 RPM
• Shaft Diameter: 24mm Solid
• Max. Horsepower Requirements: 6.0 EBHP
• Max. Fluid Temp.: 140° F.
• Inlet Ports (2): 1/2" Female
• Outlet Ports (2): 3/8" Female
• Oil capacity: 9.81 oz
• Weight: 10.0 lb.

Features
• Latest in design and technology
• New crankcase style
• High strength forged brass manifold for long term use
• NEW ceramic plungers, thicker wall to help prevent thermal shock
• Stainless steel valves
• Side mount valve seat o-rings
• High quality high pressure seals
• NEW low pressure seal with built in scraper
• Two piece piston guides
• NEW connecting rod with 12% more load surface
• Large side cover sight glass
• Oversized bearings
• Rear cover oil drain
• Forged, precision ground crankshaft

Specifications
• Max. Volume: 3.5 GPM
• Max. Discharge Pressure: 2,500 PSI
• Max. Pump Speed: 1,750 RPM
• Shaft Diameter: 24mm Solid
• Drive Side: Left
• Max. Horsepower Requirements: 6.0 EBHP
• Max. Fluid Temp.: 140° F.
• Inlet Ports (2): 1/2" Female
• Outlet Ports (2): 3/8" Female
• Oil capacity: 9.81 oz
• Weight: 10.0 lb.

Annovi Reverberi AR XWF36.17N solid shaft triplex plunger pump is rated up to 9.51 GPM at max 2,500 PSI

Features:
• Solid Shaft for Belt or Gear Drive
• Bearings are premium SKF tapered roller bearings that provide extra load support, smoother and lower crankcase running temperatures and overall extended pump life
• Forged brass head & valve covers
• Plungers are extra thick solid ceramic titanium impregnated for extended seal and pump life

Specifications:
• Max. Volume: 9.51 GPM
• Max. Discharge Pressure: 2,500 PSI
• Max. Pump Speed: 1000 RPM
• Shaft Diameter: 24mm Solid
• Max. Horsepower Requirements: 16.3 EBHP
• Max. Fluid Temp.: 160 degrees F.
• Inlet Ports (2): 3/4" BSP
• Discharge Ports (2): 3/8" BSP
• Drive Side: Standard right
• Weight: 34.0 lb.

Annovi Reverberi AR XWF36.17N-SX solid shaft triplex plunger pump (Left Hand) is rated up to 9.51 GPM at max 2,500 PSI

Features:
• Solid Shaft for Belt or Gear Drive
• Bearings are premium SKF tapered roller bearings that provide extra load support, smoother and lower crankcase running temperatures and overall extended pump life
• Forged brass head & valve covers
• Plungers are extra thick solid ceramic titanium impregnated for extended seal and pump life

Specifications:
• Max. Volume: 9.51 GPM
• Max. Discharge Pressure: 2,500 PSI
• Max. Pump Speed: 1000 RPM
• Shaft Diameter: 24mm Solid
• Max. Horsepower Requirements: 16.3 EBHP
• Max. Fluid Temp.: 160 degrees F.
• Inlet Ports (2): 3/4" BSP
• Discharge Ports (2): 3/8" BSP
• Drive Side: Left
• Weight: 34.0 lb.

This Annovi Reverberi / AR North America SRMW2.2G26-EZ-SX, SRMW22G26-EZ-SX aluminum vertical plunger pump will pump up to 2.2 GPM at 2,600 PSI. It spins at 3400 RPM in a direct drive system coupled with a gasoline engine. The matching flange provides convenient connection to most 7/8” shaft 4 - 7 HP engines. The hollow shafted pump includes a built-in pressure control valve, and chemical injection system. Comes with Thermal Relief Valve and Easy Start Valve (EZ).

Features:
• The "S" version has upgraded grade valves
• 3-Piston alternating volumetric pumps for use on cleaning units
• Check the HOLE in the ARM location relative to the inlet/outlet Port (2nd Picture)
• This SX pump is Back Mounted - 180º rotated shaft configuration (3rd picture)
• Pump body in die-cast aluminum alloy
• Pistons driven by swash plate mechanism
• Two bearing systems, to support the pump shaft and pistons
• Pistons in hardened and tempered steel
• Pump head in aluminum
• Double gasket sealing system
• Intake valves fitted above the pistons for greater efficiency
• Integral regulating valve
• Integral detergent suction system

Specifications:
• Max. Volume: 2.2 GPM
• Max. Discharge Pressure: 2,600 PSI
• Max. Pump Speed: 3,400 RPM
• Shaft Diameter: 7/8” Hollow
• Maximum Horsepower Requirements (Industrial): 5.2 GHP
• Maximum Horsepower Requirements (Standard): 6.4 GHP
• Inlet Port: 3/4" GHA (garden hose)
• Outlet Port: 22mm-14 (Twist Connect)
• Weight: 7.3 lb.

This Annovi Reverberi / AR North America SRMW2.2G26-EZ, SRMW22G26-EZ aluminum vertical plunger pump will pump up to 2.2 GPM at 2,600 PSI. It spins at 3400 RPM in a direct drive system coupled with a gasoline engine. The matching flange provides convenient connection to most 7/8” shaft 4 - 7 HP engines. The hollow shafted pump includes a built-in pressure control valve, and chemical injection system. Comes with Thermal Relief Valve and Easy Start Valve (EZ).

Features:
• The "S" version has upgraded grade valves
• 3-Piston alternating volumetric pumps for use on cleaning units
• Check the HOLE in the ARM location relative to the inlet/outlet Port (2nd Picture)
• This pump is Front Mounted (3rd picture)
• Pump body in die-cast aluminum alloy
• Pistons driven by swash plate mechanism
• Two bearing systems, to support the pump shaft and pistons
• Pistons in hardened and tempered steel
• Pump head in aluminum
• Double gasket sealing system
• Intake valves fitted above the pistons for greater efficiency
• Integral regulating valve
• Integral detergent suction system

Specifications:
• Max. Volume: 2.2 GPM
• Max. Discharge Pressure: 2,600 PSI
• Max. Pump Speed: 3,400 RPM
• Shaft Diameter: 7/8” Hollow
• Maximum Horsepower Requirements (Industrial): 5.2 GHP
• Maximum Horsepower Requirements (Standard): 6.4 GHP
• Inlet Port: 3/4" GHA (garden hose)
• Outlet Port: 22mm-14 (Twist Connect)
• Briggs 311039 = SRMW22G26-EZ
• Weight: 6.0 lb.

Features:
• Latest in design and technology
• New crankcase style
• High strength forged brass manifold for long term use
• NEW ceramic plungers, thicker wall to help prevent thermal shock
• Stainless steel valves
• Side mount valve seat o-rings
• High quality high pressure seals
• NEW low pressure seal with built in scraper
• Two piece piston guides
• NEW connecting rod with 12% more load surface
• Large side cover sight glass
• Oversized bearings
• Rear cover oil drain
• Forged, precision ground crankshaft

Specifications:
• Max. Volume: 5.5 GPM
• Max. Discharge Pressure: 2,600 PSI
• Max. Pump Speed: 1,750 RPM
• Shaft Diameter: 1-1/8” Hollow
• Max. Horsepower Requirements: 11.3 EBHP
• Max. Fluid Temp.: 140° F.
• Inlet Ports (2): 1/2" Female
• Outlet Ports (2): 3/8" Female
• Oil capacity: 13.35 oz
• Weight: 18.0 lb.

Features
• Latest in design and technology
• New crankcase style
• High strength forged brass manifold for long term use
• NEW ceramic plungers, thicker wall to help prevent thermal shock
• Stainless steel valves
• Side mount valve seat o-rings
• High quality high pressure seals
• NEW low pressure seal with built in scraper
• Two piece piston guides
• NEW connecting rod with 12% more load surface
• Large side cover sight glass
• Oversized bearings
• Rear cover oil drain
• Forged, precision ground crankshaft

Specifications
• Max. Volume: 2.5 GPM
• Max. Discharge Pressure: 2,700 PSI
• Max. Pump Speed: 3,400 RPM
• Shaft Diameter: 3/4” Hollow
• Max. Horsepower Requirements: 6.2 GHP
• Max. Fluid Temp.: 140° F.
• Inlet Ports (2): 1/2" Female
• Outlet Ports (2): 3/8" Female
• Oil capacity: 9.81 oz
• Weight: 11.0 lb.

Specifications
• Horizontal Mount Direct Drive with Gas Flange 3-6.5 HP SAE
• Max. Volume: 2.5 GPM
• Max. Discharge Pressure: 2,700 PSI
• Max. Pump Speed: 3,400 RPM
• Shaft Diameter: 3/4” Hollow
• Maximum Horsepower Requirements: 6.0 GHP
• Max. Fluid Temp.: 140º F.
• Inlet Port: 1/2" Male
• Discharge Port: 3/8" Male
• Auxiliary Port: 1/4" Female
• Built In unloader and chemical injector
• Forged brass head & valve covers
• Solid ceramic plungers
• Weight: 11.0 lb.

Features
• Latest in design and technology
• New crankcase style
• High strength forged brass manifold for long term use
• NEW ceramic plungers, thicker wall to help prevent thermal shock
• Stainless steel valves
• Side mount valve seat o-rings
• High quality high pressure seals
• NEW low pressure seal with built in scraper
• Two piece piston guides
• NEW connecting rod with 12% more load surface
• Large side cover sight glass
• Oversized bearings
• Rear cover oil drain
• Forged, precision ground crankshaft

Specifications
• Max. Volume: 3.0 GPM
• Max. Discharge Pressure: 2,700 PSI
• Max. Pump Speed: 3,400 RPM
• Shaft Diameter: 3/4” Hollow
• Max. Horsepower Requirements: 7.36 GHP
• Drive Side: Left
• Max. Fluid Temp.: 140° F.
• Inlet Ports (2): 1/2" Female
• Outlet Ports (2): 3/8" Female
• Oil capacity: 9.81 oz
• Weight: 11.0 lb.

Features
• Latest in design and technology
• New crankcase style
• High strength forged brass manifold for long term use
• NEW ceramic plungers, thicker wall to help prevent thermal shock
• Stainless steel valves
• Side mount valve seat o-rings
• High quality high pressure seals
• NEW low pressure seal with built in scraper
• Two piece piston guides
• NEW connecting rod with 12% more load surface
• Large side cover sight glass
• Oversized bearings
• Rear cover oil drain
• Forged, precision ground crankshaft

Specifications
• Max. Volume: 3.0 GPM
• Max. Discharge Pressure: 2,700 PSI
• Max. Pump Speed: 3,400 RPM
• Shaft Diameter: 3/4” Hollow
• Max. Horsepower Requirements: 5.5 EBHP
• Max. Fluid Temp.: 140° F.
• Inlet Ports (2): 1/2" Female
• Outlet Ports (2): 3/8" Female
• Oil capacity: 9.81 oz
• Weight: 11.0 lb.

Features
• Latest in design and technology
• New crankcase style
• High strength forged brass manifold for long term use
• NEW ceramic plungers, thicker wall to help prevent thermal shock
• Stainless steel valves
• Side mount valve seat o-rings
• High quality high pressure seals
• NEW low pressure seal with built in scraper
• Two piece piston guides
• NEW connecting rod with 12% more load surface
• Large side cover sight glass
• Oversized bearings
• Rear cover oil drain
• Forged, precision ground crankshaft

Specifications
• Max. Volume: 3.0 GPM
• Max. Discharge Pressure: 2,700 PSI
• Max. Pump Speed: 3,400 RPM
• Shaft Diameter: 3/4” Hollow
• Max. Horsepower Requirements: 7.36 GHP
• Max. Fluid Temp.: 140° F.
• Inlet Ports (2): 1/2" Female
• Outlet Ports (2): 3/8" Female
• Oil capacity: 9.81 oz
• Weight: 11.0 lb.

Features:
• Constructed with die-cast bodies and feature a brass head
• Internal components include special thick solid ceramic plungers for long life and durability
• Precision cast cooling fins are anodized for maximum heat dissipation
• Oversized needle bearings on the drive side, and ball on the non-drive side together with the precision supports assure positive alignment and centering in relation to the crankcase
• One-piece connecting rods are special alloy aluminum, oversized for strength and load disbursement

Specifications:
• Triplex Plunger Pump
• Direct Drive with Gas Flange 3-6.5 HP SAE
• Max. Volume: 3.0 GPM
• Max. Discharge Pressure: 2,700 PSI
• Max. Pump Speed: 3400 RPM
• Shaft Diameter: 3/4” Hollow
• Max. Horsepower Requirements: 7.3 GHP
• Max. Fluid Temp.: 160 degrees F.
• Inlet Ports (2): 1/2" BSP
• Discharge Ports (2): 3/8" BSP
• Drive Side: Standard right
• Forged brass head & valve covers
• Solid ceramic plungers
• Weight: 19.0 lb.

Features:
• Latest in design and technology
• Intergraded unloader valve and fixed chemical injector
• Triplex pump with Easy Start is smooth starting
• New crankcase style
• High strength forged brass manifold for long term use
• NEW ceramic plungers, thicker wall to help prevent thermal shock
• Stainless steel valves
• Side mount valve seat o-rings
• High quality high pressure seals
• NEW low pressure seal with built in scraper
• Two piece piston guides
• NEW connecting rod with 12% more load surface
• Large side cover sight glass
• Oversized bearings
• Rear cover oil drain
• Forged, precision ground crankshaft

Specifications:
• Max. Volume: 3.0 GPM
• Max. Discharge Pressure: 2,700 PSI
• Max. Pump Speed: 3,400 RPM
• Shaft Diameter: 3/4” Hollow
• Max. Horsepower Requirements: 7.36 GHP
• Max. Fluid Temp.: 140° F.
• Intergraded unloader valve
• Fixed chemical injector
• Built In easy start valve
• Inlet Port: 3/4" FGH (garden hose)
• Outlet Port: 3/8" Male
• Auxiliary Ports (2): (1) 1/2" Female & (1) 3/8” Female
• Oil capacity: 9.81 oz
• Weight: 12.0 lb.

Annovi Reverberi / AR North America RCV 3G27-PKG pump with bolt-on unloader, chemical Injector, thermal valve, QC socket outlet and garden hose inlet. RCV D Version with F7 flange series pumps are designed to direct drive on gasoline engines ranging from 5 - 7 HP. Intended use for heavy tasks; this triplex plunger pump features the latest in design and technology. Life tested over 2,000 hours at maximum performance. The RCV is a result of our combined 60 years of pumps building experience and expertise

Features:
• Latest in design and technology
• New crankcase style
• High strength forged brass manifold for long term use
• NEW ceramic plungers, thicker wall to help prevent thermal shock
• Stainless steel valves
• Side mount valve seat o-rings
• High quality high pressure seals
• NEW low pressure seal with built in scraper
• Two piece piston guides
• NEW connecting rod with 12% more load surface
• Large side cover sight glass
• Oversized bearings
• Rear cover oil drain
• Forged, precision ground crankshaft

Specifications:
• Max. Volume: 3.0 GPM
• Max. Discharge Pressure: 2,700 PSI
• Max. Pump Speed: 3,400 RPM
• Shaft Diameter: 3/4” Hollow
• Max. Horsepower Requirements: 7.36 GHP
• Max. Fluid Temp.: 140° F.
• Oil capacity: 9.81 oz
• Unloader Inlet: 3/4" GH (garden hose)
• Unloader Outlet: 3/8 QC socket
• Weight: 13.1 lb.

Package Components:
• RCV3G27D-F7 pump
• AR VRC-B adjustable unloader with chemical injector
• Thermal relief valve
• 3/8 QC socket
• Garden hose connector with cone filter
• Mounting bolts

This Annovi Reverberi / AR North America SRMW2.4G28-EZ-SX, SRMW24G28-EZ-SX aluminum vertical plunger pump will pump up to 2.4 GPM at 2,800 PSI. It spins at 3400 RPM in a direct drive system coupled with a gasoline engine. The matching flange provides convenient connection to most 7/8” shaft 4 - 7 HP engines. The hollow shafted pump includes a built-in pressure control valve, and chemical injection system. Comes with Thermal Relief Valve and Easy Start Valve (EZ).

Features:
• The "S" version has upgraded grade valves
• 3-Piston alternating volumetric pumps for use on cleaning units
• Pump body in die-cast aluminum alloy
• Pistons driven by swash plate mechanism
• Two bearing systems, to support the pump shaft and pistons
• Pistons in hardened and tempered steel
• Pump head in aluminum
• Double gasket sealing system
• Intake valves fitted above the pistons for greater efficiency
• Integral regulating valve
• Integral detergent suction system

Specifications:
• Max. Volume: 2.4 GPM
• Max. Discharge Pressure: 2,800 PSI
• Max. Pump Speed: 3,400 RPM
• Shaft Diameter: 7/8” Hollow
• Maximum Horsepower Requirements (Industrial): 6.1 GHP
• Maximum Horsepower Requirements (Standard): 7.5 GHP
• Inlet Port: 3/4" GHA (garden hose)
• Outlet Port: 22mm-14 (Twist Connect)
• Weight: 6.0 lb.

This Annovi Reverberi / AR North America SRMW2.4G28-EZ, SRMW24G28-EZ aluminum vertical plunger pump will pump up to 2.4 GPM at 2,800 PSI. It spins at 3400 RPM in a direct drive system coupled with a gasoline engine. The matching flange provides convenient connection to most 7/8” shaft 4 - 7 HP engines. The hollow shafted pump includes a built-in pressure control valve, and chemical injection system. Comes with Thermal Relief Valve and Easy Start Valve (EZ).

Features:
• The "S" version has upgraded grade valves
• 3-Piston alternating volumetric pumps for use on cleaning units
• Pump body in die-cast aluminum alloy
• Pistons driven by swash plate mechanism
• Two bearing systems, to support the pump shaft and pistons
• Pistons in hardened and tempered steel
• Pump head in aluminum
• Double gasket sealing system
• Intake valves fitted above the pistons for greater efficiency
• Integral regulating valve
• Integral detergent suction system

Specifications:
• Max. Volume: 2.4 GPM
• Max. Discharge Pressure: 2,800 PSI
• Max. Pump Speed: 3,400 RPM
• Shaft Diameter: 7/8” Hollow
• Maximum Horsepower Requirements (Industrial): 6.1 GHP
• Maximum Horsepower Requirements (Standard): 7.5 GHP
• Inlet Port: 3/4" GHA (garden hose)
• Outlet Port: 22mm-14 (Twist Connect)
• Weight: 6.0 lb.

This Annovi Reverberi / AR North America RMW2.5G28-EZ-SX, RMW25G28-EZ-SX aluminum vertical plunger pump will pump up to 2.5 GPM at 2,800 PSI. It spins at 3400 RPM in a direct drive system coupled with a gasoline engine. The matching flange provides convenient connection to most 7/8” shaft 4 - 7 HP engines. The hollow shafted pump includes a built-in pressure control valve, and chemical injection system. Comes with Thermal Relief Valve and Easy Start Valve (EZ).

Features:
• 3-Piston alternating volumetric pumps for use on cleaning units
• Check the HOLE in the ARM location relative to the inlet/outlet Port (2nd Picture)
• This SX pump is Back Mounted - 180º rotated shaft configuration (3rd picture)
• Pump body in die-cast aluminum alloy
• Pistons driven by swash plate mechanism
• Two bearing systems, to support the pump shaft and pistons
• Pistons in hardened and tempered steel
• Pump head pressed brass
• Double gasket sealing system
• Intake valves fitted above the pistons for greater efficiency
• Integral regulating valve
• Integral detergent suction system

Specifications:
• Max. Volume: 2.5 GPM
• Max. Discharge Pressure: 2,800 PSI
• Max. Pump Speed: 3,400 RPM
• Shaft Diameter: 7/8” Hollow
• Maximum Horsepower Requirements (Industrial): 6.4 GHP
• Maximum Horsepower Requirements (Standard): 7.8 GHP
• Inlet Port: 3/4" GHA (garden hose)
• Outlet Port: 22mm-14 (Twist Connect)
• Weight: 7.7 lb.

This Annovi Reverberi / AR North America RMW2.5G28-EZ, RMW25G28-EZ aluminum vertical plunger pump will pump up to 2.5 GPM at 2,800 PSI. It spins at 3400 RPM in a direct drive system coupled with a gasoline engine. The matching flange provides convenient connection to most 7/8” shaft 4 - 7 HP engines. The hollow shafted pump includes a built-in pressure control valve, and chemical injection system. Comes with Thermal Relief Valve and Easy Start Valve (EZ).

Features:
• 3-Piston alternating volumetric pumps for use on cleaning units
• Check the HOLE in the ARM location relative to the inlet/outlet Port (2nd Picture)
• This pump is Front Mounted (3rd picture)
• Pump body in die-cast aluminum alloy
• Pistons driven by swash plate mechanism
• Two bearing systems, to support the pump shaft and pistons
• Pistons in hardened and tempered steel
• Pump head pressed brass
• Double gasket sealing system
• Intake valves fitted above the pistons for greater efficiency
• Integral regulating valve
• Integral detergent suction system

Specifications:
• Max. Volume: 2.5 GPM
• Max. Discharge Pressure: 2,800 PSI
• Max. Pump Speed: 3,400 RPM
• Shaft Diameter: 7/8” Hollow
• Maximum Horsepower Requirements (Industrial): 6.4 GHP
• Maximum Horsepower Requirements (Standard): 7.8 GHP
• Inlet Port: 3/4" GHA (garden hose)
• Outlet Port: 22mm-14 (Twist Connect)
• Weight: 7.7 lb.

Hydraulic Pump Specifications:
• Sauer-danfoss hydraulic driven pump
• Max. Motor GPM: 18.5
• Max. Motor PSI: 2,320 PSI
• Inlet & Outlet: 3/4"

Pressure Washer Pump Specifications:
• AR Model RTX50 solid shaft pump
• Max. Volume: 13.2 GPM
• Max. Discharge Pressure: 2,900 PSI
• Max. Pump Speed: 1,450 RPM
• Max. Fluid Temp.: 140° F.
• Inlet Ports (2): 1" F
• Discharge Ports (2): 1/2" F
• Weight: 93.7 lb

Features:
• High-strength, non-porous pressed nickel-plated brass head for guaranteed safety and durability
• One-piece extra thick ceramic pistons for exceptional strength
• Stainless steel ball-type intake and delivery valves with high fluido-dynamic efficiency
• Dual sealing system with anti-extrusion ring support and lubrication with low pressure recirculation chambers
• Pump casing in high-strength aluminum alloy with oversized mounts
• Camshaft in forged, treated steel
• Oversized two-piece connecting-rods in low-friction aluminum alloy
• “Premium” quality tapered roller bearings for long lifetime
• Splash lubrication

Specifications:
• Max. Volume: 18.5 GPM
• Max. Discharge Pressure: 2,000 PSI
• Max. Pump Speed: 1,450 RPM
• Shaft Diameter: 30mm Solid
• Max. Horsepower Requirements: 25.4 EBHP
• Max. Fluid Temp.: 140° F.
• Inlet Tread: 1" Female
• Outlet Thread: 1/2" Female
• Oil capacity: 76 oz
• Weight: 72.0 lb.

Features:
• Latest in design and technology
• New crankcase style
• High strength forged brass manifold for long term use
• NEW ceramic plungers, thicker wall to help prevent thermal shock
• Stainless steel valves
• Side mount valve seat o-rings
• High quality high pressure seals
• NEW low pressure seal with built in scraper
• Two piece piston guides
• NEW connecting rod with 12% more load surface
• Large side cover sight glass
• Oversized bearings
• Rear cover oil drain
• Forged, precision ground crankshaft

Specifications:
• Max. Volume: 4.0 GPM
• Max. Discharge Pressure: 2,900 PSI
• Max. Pump Speed: 1,450 RPM
• Shaft Diameter: 24mm Solid
• Max. Horsepower Requirements: 7.9 EBHP
• Max. Fluid Temp.: 140° F.
• Inlet Ports (2): 1/2" Female
• Outlet Ports (2): 3/8" Female
• Oil capacity: 13.35 oz
• Weight: 17.0 lb.

• AR XWF Triplex Plunger Pump
• Solid Shaft for Belt or Gear Drive
• Max. Volume: 6.87 GPM
• Max. Discharge Pressure: 2,900 PSI
• Max. Pump Speed: 1000 RPM
• Shaft Diameter: 24mm Solid
• Max. Horsepower Requirements: 13.7 EBHP
• Bearings are premium SKF tapered roller bearings that provide extra load support, smoother and lower crankcase running temperatures and overall extended pump life
• Max. Fluid Temp.: 160 degrees F.
• Inlet Ports (2): 3/4" BSP
• Discharge Ports (2): 3/8" BSP
• Drive Side: Standard right
• Forged brass head & valve covers
• Plungers are extra thick solid ceramic titanium impregnated for extended seal and pump life
• Weight: 34.0 lb.

• AR XWF Triplex Plunger Pump
• Solid Shaft for Belt or Gear Drive
• Max. Volume: 7.92 GPM
• Max. Discharge Pressure: 2,900 PSI
• Max. Pump Speed: 1000 RPM
• Shaft Diameter: 24mm Solid
• Max. Horsepower Requirements: 15.8 EBHP
• Bearings are premium SKF tapered roller bearings that provide extra load support, smoother and lower crankcase running temperatures and overall extended pump life
• Max. Fluid Temp.: 160 degrees F.
• Inlet Ports (2): 3/4" BSP
• Discharge Ports (2): 3/8" BSP
• Drive Side: Standard right
• Forged brass head & valve covers
• Plungers are extra thick solid ceramic titanium impregnated for extended seal and pump life
• Weight: 34.0 lb.

Hydraulic Pump Specifications:
• Sauer-danfoss hydraulic driven pump
• Max. Motor GPM: 7.5
• Max. Motor PSI: 2,500 PSI
• Inlet & Outlet: 1/2"

Pressure Washer Pump Specifications:
• AR Model RK15.20 solid shaft pump
• Max. Volume: 4.0 GPM
• Max. Discharge Pressure: 3,000 PSI
• Max. Pump Speed: 1,450 RPM
• Max. Fluid Temp.: 140° F.
• Inlet Ports (2): 1/2" F
• Discharge Ports (2): 3/8" F 
• Weight: 31.0 lb

This Annovi Reverberi / AR North America RXV2.5G30D-EZ / RXV25G30D-EZ (22mm Outlet) horizontal plunger pump. 2.5 GPM at 3,000 PSI, spins at 3,400 RPM in a direct drive system coupled with a gasoline engine. The matching flange provides convenient connection to most 3/4” shaft 4 - 7 HP engines. The hollow shafted pump includes a built-in pressure control valve, and chemical injection system. Comes with Thermal Relief Valve and Easy Start Valve (EZ)

Features:
• 3-Piston alternating volumetric pumps for use on cleaning units
• Can be directly coupled to gas engine flange
• Fits most homeowner type horizontal pressure washers
• Horizontal Mount with Gas Flange 3-6.5 HP (2-9/16 center to center)
• Pump body in die-cast aluminum alloy
• Pistons driven by swash plate mechanism
• Two bearing systems, to support the pump shaft and pistons
• Pistons in hardened and tempered steel
• Pump head in pressed brass
• Double gasket sealing system
• Intake valves fitted above the pistons for greater efficiency
• Integral regulating valve
• Integral detergent suction system

Specifications:
• Max. Volume: 2.5 GPM
• Max. Discharge Pressure: 3,000 PSI
• Max. Pump Speed: 3,400 RPM
• Shaft Diameter: 3/4” Hollow
• Maximum Horsepower Requirements: 6.82 GHP
• Inlet Port: 3/4" GHA (garden hose)
• Outlet Port: 22mm-14 (Twist Connect)
• Weight: 8.8 lb.

This Annovi Reverberi / AR North America RMV2.5G30D-EZ / RMV25G30D-EZ (22mm Outlet) horizontal plunger pump. 2.5 GPM at 3,000 PSI, spins at 3,400 RPM in a direct drive system coupled with a gasoline engine. The matching flange provides convenient connection to most 3/4” shaft 4 - 7 HP engines. The hollow shafted pump includes a built-in pressure control valve, and chemical injection system. Comes with Thermal Relief Valve and Easy Start Valve (EZ)

Features:
• 3-Piston alternating volumetric pumps for use on cleaning units
• Can be directly coupled to gas engine flange
• Fits most homeowner type horizontal pressure washers
• Horizontal Mount with Gas Flange 3-6 HP (2-9/16 center to center)
• Pump body in die-cast aluminum alloy
• Pistons driven by swash plate mechanism
• Two bearing systems, to support the pump shaft and pistons
• Pistons in hardened and tempered steel
• Pump head in pressed forged brass
• Double gasket sealing system
• Intake valves fitted above the pistons for greater efficiency
• Integral regulating valve
• Integral detergent suction system

Specifications:
• Max. Volume: 2.5 GPM
• Max. Discharge Pressure: 3,000 PSI
• Max. Pump Speed: 3,400 RPM
• Shaft Diameter: 3/4” Hollow
• Maximum Horsepower Requirements: 6.82 GHP
• Inlet Port: 3/4" GHA (garden hose)
• Outlet Port: 22mm-14 (Twist Connect)
• Weight: 7.5 lb.

This Annovi Reverberi / AR North America RXV3G30D-EZ (22mm Outlet) horizontal plunger pump. 3.0 GPM at 3,000 PSI, spins at 3,400 RPM in a direct drive system coupled with a gasoline engine. The matching flange provides convenient connection to most 3/4” shaft 4 - 7 HP engines. The hollow shafted pump includes a built-in pressure control valve, and chemical injection system. Comes with Thermal Relief Valve and Easy Start Valve (EZ)

Features:
• 3-Piston alternating volumetric pumps for use on cleaning units
• Can be directly coupled to gas engine flange
• Fits most homeowner type horizontal pressure washers
• Horizontal Mount with Gas Flange 3-6.5 HP (2-9/16 center to center)
• Pump body in die-cast aluminum alloy
• Pistons driven by swash plate mechanism
• Two bearing systems, to support the pump shaft and pistons
• Pistons in hardened and tempered steel
• Pump head in pressed brass
• Double gasket sealing system
• Intake valves fitted above the pistons for greater efficiency
• Integral regulating valve
• Integral detergent suction system

Specifications:
• Max. Volume: 3.0 GPM
• Max. Discharge Pressure: 3,000 PSI
• Max. Pump Speed: 3,400 RPM
• Shaft Diameter: 3/4” Hollow
• Maximum Horsepower Requirements: 8.2 GHP
• Inlet Port: 3/4" GHA (garden hose)
• Outlet Port: 22mm-14 (Twist Connect)
• Weight: 8.8 lb.

Features:
• Latest in design and technology
• New crankcase style
• High strength forged brass manifold for long term use
• NEW ceramic plungers, thicker wall to help prevent thermal shock
• Stainless steel valves
• Side mount valve seat o-rings
• High quality high pressure seals
• NEW low pressure seal with built in scraper
• Two piece piston guides
• NEW connecting rod with 12% more load surface
• Large side cover sight glass
• Oversized bearings
• Rear cover oil drain
• Forged, precision ground crankshaft

Specifications:
• Max. Volume: 3.0 GPM
• Max. Discharge Pressure: 3,000 PSI
• Max. Pump Speed: 1,750 RPM
• Shaft Diameter: 1-1/8” Hollow
• Max. Horsepower Requirements: 6.2 EBHP
• Max. Fluid Temp.: 140° F.
• Inlet Ports (2): 1/2" Female
• Outlet Ports (2): 3/8" Female
• Oil capacity: 13.35 oz
• Weight: 18.0 lb.