Fairview USA Inc.

Fairview GAS-FLO™ 853-L Brass Precision LP Gas Welding Standard Needle Valve 1/4 MPT x 9/16-18 LH. Fairview's Welding Standard instrumentation valves are CSA certified for use with LP-Gas up to 350 PSI

Applications:
• These instrumentation valves have knurled brass hand wheels
• For use with air, LP gases (such as torch applications) and liquids
• Each valve is pressure tested at the factory
• The valve body's machined from brass bar stock
• The stem is stainless steel with a fine thread for controlling flow
• O-ring packing assures leak proof trouble free service

TECHNICAL DATA SHEET

INSTALLATION DATA SHEET

Specifications:
• C.S.A. CERTIFIED: LP GAS To 350 P.S.I.
• Inlet : 1/4” MPT
• Outlet : 9/16-18 LH Welding Standard
• Temperature: -40°F to +180°F (-40°C to +82°C)
• Weight: 4.5 oz

Fairview GAS-FLO® GR-9148C Compact High Pressure LP Gas First Stage Regulator 1/4 F NPT In x 1/2 F NPT Out 2,400,000 BTU/HR. Fairview's Compact High Pressure Lp Gas First Stage Regulators provide the highest gas flows available in a compact design

Features:
• Compact First-Stage regulators are designed for use as the first regulator of a Two-Stage regulation system
• Its’ compact design makes it the ideal choice for small domestic applications
• This large capacity adjustable First Stage regulator is factory set at 10 PSIG
• Equipped with integral relief valve and built-in 1/8" FNPT gauge tap
• UL Listed

TECHNICAL DATA SHEET

INSTALLATION DATA SHEET

Specifications:
• Inlet: 1/4 F NPT
• Outlet: 1/2 F NPT
• Delivery Pressure: 10 PSI
• Inlet Pressure: 250 PSI
• Bonnet Vent: Over outlet
• Capacity BTU/Hr Propane: 2,400,000
• TO BE INSTALLED BY LICENSED GAS FITTERS ONLY
• Weight: 1.85 lbs

Fairview GAS-FLO® GR-918C Compact High Pressure LP Gas First Stage Regulator Female POL In x 1/2 F NPT Out 2,400,000 BTU/HR. Fairview's Compact High Pressure Lp Gas First Stage Regulators provide the highest gas flows available in a compact design

Features:
• Compact First-Stage regulators are designed for use as the first regulator of a Two-Stage regulation system
• Its’ compact design makes it the ideal choice for small domestic applications
• This large capacity adjustable First Stage regulator is factory set at 10 PSIG
• Equipped with integral relief valve and built-in 1/8" FNPT gauge tap
• UL Listed

TECHNICAL DATA SHEET

INSTALLATION DATA SHEET

Specifications:
• Inlet: Female POL
• Outlet: 1/2 F NPT
• Delivery Pressure: 10 PSI
• Inlet Pressure: 250 PSI
• Bonnet Vent: Over outlet
• Capacity BTU/Hr Propane: 2,400,000
• TO BE INSTALLED BY LICENSED GAS FITTERS ONLY
• Weight: 1.95 lbs

Fairview GAS-FLO® GR-9288C Compact Low Pressure LP Gas Second Stage Regulator 1/2 F NPT In x 1/2 F NPT Out 1,200,000 BTU/HR. Fairview's Compact Low Pressure Lp Gas Second Stage Regulators provide the highest gas flows available in a compact design

Features:
• Second Stage regulators are designed to reduce the pressure from a First-Stage regulator
• Its’ compact design makes it the ideal choice for small domestic applications
• These adjustable regulators are factory set at 11" w.c. with first stage inlet pressure of 10 psig
• Equipped with integral relief valve and built-in 1/8" FNPT gauge tap
• UL Listed

TECHNICAL DATA SHEET

INSTALLATION DATA SHEET

Specifications:
• Inlet: 1/2 F NPT
• Outlet: 1/2 F NPT
• Delivery Pressure: 11" W.C. @ 10 PSI
• Vent Position: Over Inlet
• Capacity BTU/Hr Propane: 1,200,000
• Mount: Standard
• TO BE INSTALLED BY LICENSED GAS FITTERS ONLY
• Weight: 1.60 lbs

Fairview GAS-FLO® GR-92812C Compact Low Pressure LP Gas Second Stage Regulator 1/2 F NPT In x 3/4 F NPT Out 1,200,000 BTU/HR. Fairview's Compact Low Pressure Lp Gas Second Stage Regulators provide the highest gas flows available in a compact design

Features:
• Second Stage regulators are designed to reduce the pressure from a First-Stage regulator
• Its’ compact design makes it the ideal choice for small domestic applications
• These adjustable regulators are factory set at 11" w.c. with first stage inlet pressure of 10 psig
• Equipped with integral relief valve and built-in 1/8" FNPT gauge tap
• UL Listed

TECHNICAL DATA SHEET

INSTALLATION DATA SHEET

Specifications:
• Inlet: 1/2 F NPT
• Outlet: 3/4 F NPT
• Delivery Pressure: 11" W.C. @ 10 PSI
• Vent Position: Over Inlet
• Capacity BTU/Hr Propane: 1,200,000
• Mount: Standard
• TO BE INSTALLED BY LICENSED GAS FITTERS ONLY
• Weight: 1.60 lbs

Fairview GAS-FLO® GR-968C Compact LP Gas Two Stage Regulator 1/4 F NPT In x 1/2 F NPT Out 1,000,000 BTU/HR. Fairview's Compact Lp Gas Two Stage Regulators provide the highest gas flows available in a compact design

Features:
• This Compact regulator combines first and second stage regulators into a single unit
• Designed to reduce container pressure down to 11" w.c. delivery pressure
• Its’ compact design makes it the ideal choice for small domestic applications
• Equipped with 1/8" FNPT gauge taps on inlet and outlet for easy system pressure checks
• UL Listed

TECHNICAL DATA SHEET

INSTALLATION DATA SHEET

Specifications:
• Inlet: 1/4 F NPT
• Outlet: 1/2 F NPT
• Delivery Pressure: 11" W.C. @ 250 PSI
• Vent 2nd Stage: Over Outlet
• Capacity BTU/Hr Propane: 1,000,000
• EFV: No
• TO BE INSTALLED BY LICENSED GAS FITTERS ONLY
• Weight: 1.80 lbs

Fairview GAS-FLO® GR-9994 Compact Low Pressure LP Gas Two Stage Automatic Changeover Regulator 1/4 F. Inv. Flare In (2) x 3/8 FPT Out. Fairview's GAS-FLO® LP-Gas Two Stage Automatic Changeover is used by Recreational Vehicle (RV) Manufacturers across North America

Features:
• The Fairview X-SERIES Compact Automatic Changeover Regulator redirects LP gas vapor flow from an empty designated service cylinder to a reserve cylinder, without interruption of service
• It features a green indicator dome which changes to red when the service cylinder needs to be refilled
• Excess Flow
• Zinc Die Cast
• Molded Rubber Diaphragms
• CSA Listed to U.L. 144
• 2nd Stage Relief Mechanism Per U.L. 144
• Powder Coated

TECHNICAL DATA SHEET

INSTALLATION DATA SHEET

Specifications:
• Inlets (2): 1/4 Female Inverted Flare
• Outlet: 3/8 FPT
• Capacity BTU/Hr Propane (Service Cylinder): 262,500
• Capacity BTU/Hr Propane (Reserve Cylinder): 210,000
• TO BE INSTALLED BY LICENSED GAS FITTERS ONLY
• Weight: 1.45 lbs

Fairview GAS-FLO® FF-KIT117 Custom 262,500 BTU 2 Stage Auto-Changeover LPG Regulator Kit With (2) 12" Pigtails and 1/2 Male SAE 45° Flare Fitting Outlet. This is an assembled 2 bottle regulator kit ready to mount

Features:
• The Fairview X-SERIES Compact Automatic Changeover Regulator redirects LP gas vapor flow from an empty designated service cylinder to a reserve cylinder, without interruption of service
• It features a green indicator dome which changes to red when the service cylinder needs to be refilled

Kit Includes:
• (1) GAS-FLO® GR-9994 2 Stage Automatic Changeover Regulator
• (1) GAS-FLO® GR-5994 Protective Cover for GR-9994
• (1) GAS-FLO® GR-RVB RV Style U Mounting Bracket
• (2) GAS-FLO® GR-SCREW Screw for Installing Brackets Onto Gas-Flo Propane Regulators
• (2) GAS-FLO® I4TC12MI4QC 1/4 ID 12" Type 1 Propane Hose Assy Thermoplastic 1/4 MI x QCC
• (1) GAS-FLO® 48-8C 1/2 Male SAE 45° flare fitting (Installed)

TECHNICAL DATA SHEET

INSTALLATION DATA SHEET

Specifications:
• Inlets (2): High Capacity Green QCC1 ACME
• Outlet: 1/2 Male SAE 45° flare fitting
• Capacity BTU/Hr Propane (Service Cylinder): 262,500
• Capacity BTU/Hr Propane (Reserve Cylinder): 210,000
• TO BE INSTALLED BY LICENSED GAS FITTERS ONLY
• Weight: 2.40 lbs

Fairview GAS-FLO® RV-9994KIT-CU12 Custom 262,500 BTU 2 Stage Auto-Changeover LPG Regulator Kit With (2) 12" Pigtails and 3/8 FPT Outlet. This is an assembled 2 bottle regulator kit ready to mount

Features:
• The Fairview X-SERIES Compact Automatic Changeover Regulator redirects LP gas vapor flow from an empty designated service cylinder to a reserve cylinder, without interruption of service
• It features a green indicator dome which changes to red when the service cylinder needs to be refilled

Kit Includes:
• (1) GAS-FLO® GR-9994 2 Stage Automatic Changeover Regulator
• (1) GAS-FLO® GR-5994 Protective Cover for GR-9994
• (1) GAS-FLO® GR-RVB RV Style U Mounting Bracket
• (2) GAS-FLO® GR-SCREW Screw for Installing Brackets Onto Gas-Flo Propane Regulators
• (2) GAS-FLO® I4TC12MI4QC 1/4 ID 12" Type 1 Propane Hose Assy Thermoplastic 1/4 MI x QCC

TECHNICAL DATA SHEET

INSTALLATION DATA SHEET

Specifications:
• Inlets (2): High Capacity Green QCC1 ACME
• Outlet: 3/8 FPT
• Capacity BTU/Hr Propane (Service Cylinder): 262,500
• Capacity BTU/Hr Propane (Reserve Cylinder): 210,000
• TO BE INSTALLED BY LICENSED GAS FITTERS ONLY
• Weight: 2.35 lbs

Fairview GAS-FLO® TRAILTRAVEL-KIT2400G Custom 345,000 BTU 2 Stage Auto-Changeover LPG Regulator Kit With (2) 12" Pigtails and 3/8 FPT Outlet. This is an assembled 2 bottle regulator kit ready to mount

Features:
• The Fairview X-SERIES Compact Automatic Changeover Regulator redirects LP gas vapor flow from an empty designated service cylinder to a reserve cylinder, without interruption of service
• It features a green indicator dome which changes to red when the service cylinder needs to be refilled
• Highest Flow Available in Cold Temps!

Kit Includes:
• (1) GAS-FLO® GR-9984 2 Stage Automatic Changeover Regulator
• (1) GAS-FLO® GR-5984 Protective Cover for GR-9984
• (1) GAS-FLO® GR-RVB RV Style U Mounting Bracket
• (2) GAS-FLO® GR-SCREW Screw for Installing Brackets Onto Gas-Flo Propane Regulators
• (2) GAS-FLO® I4TC12MI4QC 1/4 ID 12" Type 1 Propane Hose Assy Thermoplastic 1/4 MI x QCC

TECHNICAL DATA SHEET

INSTALLATION DATA SHEET

Specifications:
• Inlets (2): High Capacity Green QCC1 ACME
• Outlet: 3/8 FPT
• Capacity BTU/Hr Propane (Service Cylinder): 345,000
• Capacity BTU/Hr Propane (Reserve Cylinder): 200,000
• TO BE INSTALLED BY LICENSED GAS FITTERS ONLY
• Weight: 2.65 lbs

Fairview GAS-FLO™ 2092 Cylinder Primus x 1/4 FPT. Fairview's Cylinder Primus By Female Pipe is ideal for LP-Gas applications

Specifications:
• Cylinder Thread: Male 1”-20
• Primus Thread: M14 x 1.5
• Pipe Thread: 1/4” FPT
• Material: Brass
• TO BE INSTALLED BY LICENSED GAS FITTERS ONLY
• Weight: 2.6 oz

Fairview GAS-FLO™ 2000 Dual Tank Manifold Tee 1/4 Inv Flare Inlets x 1/4 MPT Outlet. Fairview's Dual Tank Manifold Tee is ideal for adding a secondary Propane tank to a gas system

Specifications:
• Inlets (2): 1/4 Inverted Flare
• Outlet: 1/4 MPT
• Material: Brass
• TO BE INSTALLED BY LICENSED GAS FITTERS ONLY
• Weight: 2.2 oz

Fairview QD-RVSDC-4 GAS-FLO™ Dust Plug for QD-GMRVC4-4F Quick Disconnect Coupler

Features:
• Fairview's LPG/Nat. Gas Nipple Dust Caps Help Protect QD-GMC Series QD's when they are not in use

TECHNICAL DATA SHEET

Specifications:
• Color: Yellow
• Material: Plastic
• Weight: 0.3 oz

Fairview GAS-FLO™ 2003-T Excess Flow Tailpiece Assembly with O-Ring POL x 1/4 MPT. Fairview's Excess Flow Tailpiece Assembly is ideal for LP-Gas applications

Specifications:
• POL: Excess Flow with O-ring
• Thread: 1/4 MPT
• O.A.L: 2-3/8”
• Material: Brass
• TO BE INSTALLED BY LICENSED GAS FITTERS ONLY
• Weight: 3.7 oz

Fairview GAS-FLO® GR-330 High Pressure Pounds-To-Pounds LP Gas Regulator 1/4 FPT 1,500,000 BTU/HR. Fairview's GAS-FLO® Lbs to Lbs adjustable LP-Gas Regulators are ideal for LP torches and other high flow applications

Applications:
• Designed for cylinder systems in liquid or vapor service
• Delivery pressures are adjustable from 0-30 PSI
• Ideally suited for a variety of industrial applications
• Torches • Construction Heaters • Fish Cookers • Tar Pot Heaters • Flame Cultivators
• UL Listed

TECHNICAL DATA SHEET

Specifications:
• Inlet: 1/4 FPT
• Outlet: 1/4 FPT
• Delivery Pressure Range: 0-30 PSIG
• Outlet Pressure (Set Point): 30 PSIG
• Maximum Inlet Pressure: 250 PSIG
• Capacity BTU/Hr Propane: 1,500,000
• Gauge Port: 1/4 FPT (Plugged)
• TO BE INSTALLED BY LICENSED GAS FITTERS ONLY
• Weight: 1.30 lbs

Fairview GAS-FLO® GR-360 High Pressure Pounds-To-Pounds LP Gas Regulator 1/4 FPT 2,000,000 BTU/HR 0-60 PSIG Range. Fairview's GAS-FLO® Lbs to Lbs adjustable LP-Gas Regulators are ideal for LP torches and other high flow applications

Applications:
• Designed for cylinder systems in liquid or vapor service
• Delivery pressures are adjustable from 0-60 PSI
• Ideally suited for a variety of industrial applications
• Torches • Construction Heaters • Fish Cookers • Tar Pot Heaters • Flame Cultivators
• UL Listed

TECHNICAL DATA SHEET

Specifications:
• Inlet: 1/4 FPT
• Outlet: 1/4 FPT
• Delivery Pressure Range: 0-60 PSIG
• Outlet Pressure (Set Point): 60 PSIG
• Maximum Inlet Pressure: 250 PSIG
• Capacity BTU/Hr Propane: 2,000,000
• Gauge Port: 1/4 FPT (Plugged)
• TO BE INSTALLED BY LICENSED GAS FITTERS ONLY
• Weight: 1.30 lbs

Fairview GAS-FLO™ 2491 Two Piece Last Chance Cylinder Adapter 1-20 Female Cylinder x Male QCC1. Fairview's Last Chance Cylinder Adapter allows for the use of a 1LB Disposable Propane Cylinder if the main tank runs out

Specifications:
• Cylinder Thread: Female 1”-20
• QCC1: Male
• Material: Brass
• TO BE INSTALLED BY LICENSED GAS FITTERS ONLY
• Weight: 7.9 oz

Fairview GAS-FLO® GR-9950 Low Pressure LP Gas Two Stage Regulator 1/4 FPT In x 3/8 FPT Out 225,000 BTU/HR. Fairview's GAS-FLO® Two Stage LP Gas Regulators are ideal for use on RV's and commercial size grill

Features:
• The X-SERIES* model GR-9950 and GR-9959 regulator combines both a high pressure first stage and a low pressure second stage regulator into a single unit
• Ideally designed for RV applications, these regulators ensure a smooth and continuous flow of gas to all appliances
• Excess Flow
• Zinc Die Cast
• Molded Rubber Diaphragms
• CSA Listed to U.L. 144
• 2nd Stage Relief Mechanism Per U.L. 144
• Adjusting Screw and Dust Cap Design
• Powder Coated

TECHNICAL DATA SHEET

INSTALLATION DATA SHEET

Specifications:
• Inlet: 1/4 FPT
• Outlet: 3/8 FPT
• Vent position: Above Outlet
• Capacity BTU/Hr Propane: 225,000
• TO BE INSTALLED BY LICENSED GAS FITTERS ONLY
• Weight: 1.25 lbs

Fairview GAS-FLO® GR-9959 Low Pressure LP Gas Two Stage Regulator 1/4 FPT In x 3/8 FPT Out 9:00 Vent 225,000 BTU/HR. Fairview's GAS-FLO® Two Stage LP Gas Regulators are ideal for use on RV's and commercial size grill

Features:
• The X-SERIES* model GR-9950 and GR-9959 regulator combines both a high pressure first stage and a low pressure second stage regulator into a single unit
• Ideally designed for RV applications, these regulators ensure a smooth and continuous flow of gas to all appliances
• Excess Flow
• Zinc Die Cast
• Molded Rubber Diaphragms
• CSA Listed to U.L. 144
• 2nd Stage Relief Mechanism Per U.L. 144
• Adjusting Screw and Dust Cap Design
• Powder Coated

TECHNICAL DATA SHEET

INSTALLATION DATA SHEET

Specifications:
• Inlet: 1/4 FPT
• Outlet: 3/8 FPT
• Vent position: 9:00 / 90°
• Capacity BTU/Hr Propane: 225,000
• TO BE INSTALLED BY LICENSED GAS FITTERS ONLY
• Weight: 1.25 lbs

Fairview GAS-FLO® GR-9984 Low Pressure LP Gas Two Stage Automatic Changeover Regulator 1/4 F. Inv. Flare In (2) x 3/8 FPT Out. Fairview's GAS-FLO® LP-Gas Two Stage Automatic Changeover is the most used Regulator by Recreational Vehicle (RV) Manufacturers across North America

Features:
• The Fairview X-SERIES Automatic Changeover Regulator redirects LP gas vapor flow from an empty designated service cylinder to a reserve cylinder, without interruption of service
• It features a green indicator dome which changes to red when the service cylinder needs to be refilled
• Highest Flow Available in Cold Temps!
• Excess Flow
• Zinc Die Cast
• Molded Rubber Diaphragms
• CSA Listed to U.L. 144
• 2nd Stage Relief Mechanism Per U.L. 144
• Powder Coated

TECHNICAL DATA SHEET

INSTALLATION DATA SHEET

Specifications:
• Inlets (2): 1/4 Female Inverted Flare
• Outlet: 3/8 FPT
• Capacity BTU/Hr Propane (Service Cylinder): 345,000
• Capacity BTU/Hr Propane (Reserve Cylinder): 200,000
• TO BE INSTALLED BY LICENSED GAS FITTERS ONLY
• Weight: 1.75 lbs

Fairview GAS-FLO™ 2001-S Manifold Block Tee Assembly with O-Ring Female POL (2) x Male POL. Fairview's Female POL Tee is ideal for adding a second gas appliance to an LP-Gas system

Specifications:
• End (2): Female POL
• End: Male POL
• Material: Brass
• TO BE INSTALLED BY LICENSED GAS FITTERS ONLY
• Weight: 12.0 oz

Fairview GAS-FLO® RV Style U Mounting Bracket

GAS-FLO® Square Mounting Bracket (2 - Z) for Fairviiew RV LP-Gas Regulators

Fairview GAS-FLO™ 2002-HW Tailpiece Assembly with Handwheel O-Ring POL x 1/4 MPT. Fairview's POL Hand Wheel eases hand connection of POL Tailpiece

Specifications:
• POL: Soft nose with O-ring
• Thread: 1/4 MPT
• O.A.L: 2-1/2”
• Material: Brass
• TO BE INSTALLED BY LICENSED GAS FITTERS ONLY
• Weight: 4.0 oz

Fairview GAS-FLO™ 2002-H-HN Tailpiece Assembly with Hex Head No O-Ring POL x 1/4 MPT

Specifications:
• POL: Hard nose (No O-ring)
• Thread: 1/4 MPT
• O.A.L: 2”
• Material: Brass
• TO BE INSTALLED BY LICENSED GAS FITTERS ONLY
• Weight: 3.2 oz

Fairview GAS-FLO™ 2002 Tailpiece Assembly with O-Ring POL x 1/4 MPT. Fairview's Tailpiece Assembly - Soft Nose is ideal for LP-Gas applications

Specifications:
• POL: Soft nose with O-ring
• Thread: 1/4 MPT
• O.A.L: 2-1/2”
• Material: Brass
• TO BE INSTALLED BY LICENSED GAS FITTERS ONLY
• Weight: 3.7 oz

Fairview GAS-FLO® UL Listed Green QCC1 Connection x 1/4 MPT 400,000 BTU

Fairview's U.L. Listed QCC1 Connections are color coded for BTU/HR ow rate identication

Fairview GAS-FLO® Z Mounting Bracket for Fairviiew RV LP-Gas Regulators

Fairview RV-TANK-KIT18BLK Dual Tank Mounting Kit for 20 lbs Vertical LP Gas Tanks. Fairview's Tank Pan Kit Components are designed to fit 20LB RV Propane Tanks

Specifications:
• (1) Threaded bar for 20 lb
• (1) Top hold down bar
• (1) Black double tank pan
• (1) Galvanized wingnut
• Weight: 7.35 lbs

Fairview RV-TANK-KIT24BLK Dual Tank Mounting Kit for 30 lbs Vertical LP Gas Tanks. Fairview's Tank Pan Kit Components are designed to fit 30LB RV Propane Tanks

Specifications:
• (1) Threaded bar for 30 lb
• (1) Top hold down bar
• (1) Black double tank pan
• (1) Galvanized wingnut
• Weight: 7.60 lbs

Fairview Screw for Installing Brackets Onto GAS-FLO® Propane Regulators

Accutek® S1005-D Steel 45° Elbow 1/2 Female Pipe x 1/2 Female Pipe Hydraulic Fitting. Fairview's SAE steel pipe fittings create a stress-generated seal.

Specifications:
• Applications - Water, Oil, Air
• Working Pressure: 3,000 PSI
• Burst Pressure: 12,000 PSI
• Working Temperature: -65°F (-54°C) to 250°F (120°C)
• Pipe threads must be sealed using approved thread sealant
• Weight: 0.26 lbs

Accutek® S1000-D Steel 90° Elbow 1/2 Female Pipe x 1/2 Female Pipe Hydraulic Fitting. Fairview's SAE steel pipe fittings create a stress-generated seal.

Specifications:
• Applications - Water, Oil, Air
• Working Pressure: 3,000 PSI
• Burst Pressure: 12,000 PSI
• Working Temperature: -65°F (-54°C) to 250°F (120°C)
• Pipe threads must be sealed using approved thread sealant
• Weight: 0.37 lbs

Accutek® S1003-DB Steel Female Hex Coupling 1/2 Female Pipe x 1/4 Female Pipe Hydraulic Fitting. Fairview's SAE steel pipe fittings create a stress-generated seal.

Specifications:
• Applications - Water, Oil, Air
• Working Pressure: 3,000 PSI
• Burst Pressure: 12,000 PSI
• Working Temperature: -65°F (-54°C) to 250°F (120°C)
• Pipe threads must be sealed using approved thread sealant
• Weight: 0.28 lbs

Accutek® S1003-DC Steel Female Hex Coupling 1/2 Female Pipe x 3/8 Female Pipe Hydraulic Fitting. Fairview's SAE steel pipe fittings create a stress-generated seal.

Specifications:
• Applications - Water, Oil, Air
• Working Pressure: 3,000 PSI
• Burst Pressure: 12,000 PSI
• Working Temperature: -65°F (-54°C) to 250°F (120°C)
• Pipe threads must be sealed using approved thread sealant
• Weight: 0.25 lbs

Accutek® S1020-DC Steel Adapter 1/2 Female Pipe x 3/8 Male Pipe Hydraulic Fitting. Fairview's SAE steel pipe fittings create a stress-generated seal.

Specifications:
• Applications - Water, Oil, Air
• Working Pressure: 3,000 PSI
• Burst Pressure: 12,000 PSI
• Working Temperature: -65°F (-54°C) to 250°F (120°C)
• Pipe threads must be sealed using approved thread sealant
• Weight: 0.25 lbs

Accutek® S1099-D Steel 90° Elbow 1/2 Male Pipe x 1/2 Male Pipe Hydraulic Fitting. Fairview's SAE steel pipe fittings create a stress-generated seal.

Specifications:
• Applications - Water, Oil, Air
• Working Pressure: 3,000 PSI
• Burst Pressure: 12,000 PSI
• Working Temperature: -65°F (-54°C) to 250°F (120°C)
• Pipe threads must be sealed using approved thread sealant
• Weight: 0.28 lbs

Accutek® S1006-D Steel Male Branch Tee 1/2 Female Pipe x 1/2 Female Pipe x 1/2 Male Pipe Hydraulic Fitting. Fairview's SAE steel pipe fittings create a stress-generated seal.

Specifications:
• Applications - Water, Oil, Air
• Working Pressure: 3,000 PSI
• Burst Pressure: 12,000 PSI
• Working Temperature: -65°F (-54°C) to 250°F (120°C)
• Pipe threads must be sealed using approved thread sealant
• Weight: 0.46 lbs

Accutek® S1021-D Steel Hex Head Plug 1/2 Male Pipe Hydraulic Fitting. Fairview's SAE steel pipe fittings create a stress-generated seal.

Specifications:
• Applications - Water, Oil, Air
• Working Pressure: 3,000 PSI
• Burst Pressure: 12,000 PSI
• Working Temperature: -65°F (-54°C) to 250°F (120°C)
• Pipe threads must be sealed using approved thread sealant
• Weight: 0.13 lbs

Accutek® S1024-D Steel 45° Street Elbow 1/2 Male Pipe x 1/2 Female Pipe Hydraulic Fitting. Fairview's SAE steel pipe fittings create a stress-generated seal.

Specifications:
• Applications - Water, Oil, Air
• Working Pressure: 3,000 PSI
• Burst Pressure: 12,000 PSI
• Working Temperature: -65°F (-54°C) to 250°F (120°C)
• Pipe threads must be sealed using approved thread sealant
• Weight: 0.29 lbs

Accutek® S1016-DC Steel 90° Street Elbow 1/2 Male Pipe x 3/8 Female Pipe Hydraulic Fitting. Fairview's SAE steel pipe fittings create a stress-generated seal.

Specifications:
• Applications - Water, Oil, Air
• Working Pressure: 3,000 PSI
• Burst Pressure: 12,000 PSI
• Working Temperature: -65°F (-54°C) to 250°F (120°C)
• Pipe threads must be sealed using approved thread sealant
• Weight: 0.23 lbs

Accutek® S1099-DC Steel 90° Elbow 1/2 Male Pipe x 3/8 Male Pipe Hydraulic Fitting. Fairview's SAE steel pipe fittings create a stress-generated seal.

Specifications:
• Applications - Water, Oil, Air
• Working Pressure: 3,000 PSI
• Burst Pressure: 12,000 PSI
• Working Temperature: -65°F (-54°C) to 250°F (120°C)
• Pipe threads must be sealed using approved thread sealant
• Weight: 0.26 lbs

Accutek® S1007-D Steel Street Tee 1/2 Female Pipe x 1/2 Male Pipe x 1/2 Female Pipe Hydraulic Fitting. Fairview's SAE steel pipe fittings create a stress-generated seal.

Specifications:
• Applications - Water, Oil, Air
• Working Pressure: 3,000 PSI
• Burst Pressure: 12,000 PSI
• Working Temperature: -65°F (-54°C) to 250°F (120°C)
• Pipe threads must be sealed using approved thread sealant
• Weight: 0.44 lbs

Accutek® S1005-B Steel 45° Elbow 1/4 Female Pipe x 1/4 Female Pipe Hydraulic Fitting. Fairview's SAE steel pipe fittings create a stress-generated seal.

Specifications:
• Applications - Water, Oil, Air
• Working Pressure: 5,000 PSI
• Burst Pressure: 20,000 PSI
• Working Temperature: -65°F (-54°C) to 250°F (120°C)
• Pipe threads must be sealed using approved thread sealant
• Weight: 0.11 lbs