Fairview USA Inc.

Fairview GAS-FLO® GR-9984 Low Pressure LP Gas Two Stage Automatic Changeover Regulator 1/4 F. Inv. Flare In (2) x 3/8 FPT Out. Fairview's GAS-FLO® LP-Gas Two Stage Automatic Changeover is the most used Regulator by Recreational Vehicle (RV) Manufacturers across North America

Features:
• The Fairview X-SERIES Automatic Changeover Regulator redirects LP gas vapor flow from an empty designated service cylinder to a reserve cylinder, without interruption of service
• It features a green indicator dome which changes to red when the service cylinder needs to be refilled
• Highest Flow Available in Cold Temps!
• Excess Flow
• Zinc Die Cast
• Molded Rubber Diaphragms
• CSA Listed to U.L. 144
• 2nd Stage Relief Mechanism Per U.L. 144
• Powder Coated

TECHNICAL DATA SHEET

INSTALLATION DATA SHEET

Specifications:
• Inlets (2): 1/4 Female Inverted Flare
• Outlet: 3/8 FPT
• Capacity BTU/Hr Propane (Service Cylinder): 345,000
• Capacity BTU/Hr Propane (Reserve Cylinder): 200,000
• TO BE INSTALLED BY LICENSED GAS FITTERS ONLY
• Weight: 1.75 lbs

Fairview GAS-FLO® GR-9959 Low Pressure LP Gas Two Stage Regulator 1/4 FPT In x 3/8 FPT Out 9:00 Vent 225,000 BTU/HR. Fairview's GAS-FLO® Two Stage LP Gas Regulators are ideal for use on RV's and commercial size grill

Features:
• The X-SERIES* model GR-9950 and GR-9959 regulator combines both a high pressure first stage and a low pressure second stage regulator into a single unit
• Ideally designed for RV applications, these regulators ensure a smooth and continuous flow of gas to all appliances
• Excess Flow
• Zinc Die Cast
• Molded Rubber Diaphragms
• CSA Listed to U.L. 144
• 2nd Stage Relief Mechanism Per U.L. 144
• Adjusting Screw and Dust Cap Design
• Powder Coated

TECHNICAL DATA SHEET

INSTALLATION DATA SHEET

Specifications:
• Inlet: 1/4 FPT
• Outlet: 3/8 FPT
• Vent position: 9:00 / 90°
• Capacity BTU/Hr Propane: 225,000
• TO BE INSTALLED BY LICENSED GAS FITTERS ONLY
• Weight: 1.25 lbs

Fairview GAS-FLO® GR-866 Single Stage Low Pressure LP Gas Regulator Black QCC1 In x 3/8 FPT Out. Fairview's GAS-FLO® Single Stage, Compact LP-Gas Regulators are rated to 175,000 BTU/hr

Features:
• GR-800 regulator with QCC1 (1-5/16 F. Acme)
• The model GR-800 regulator incorporates a drip lip vent and is ideally suited for use with portable appliances
• Zinc Die Cast
• Molded Rubber Diaphragms
• Underwriters Laboratories Listed
• Integral Pressure Relief

TECHNICAL DATA SHEET

Specifications:
• Inlet: QCC1 (1-5/16 F. Acme)
• Outlet: 3/8 FPT
• Vent Position: Drip Lip Vent Above Outlet
• Capacity BTU/Hr Propane: 175,000
• TO BE INSTALLED BY LICENSED GAS FITTERS ONLY
• Weight: 0.75 lbs

Fairview GAS-FLO® GR-968C Compact LP Gas Two Stage Regulator 1/4 F NPT In x 1/2 F NPT Out 1,000,000 BTU/HR. Fairview's Compact Lp Gas Two Stage Regulators provide the highest gas flows available in a compact design

Features:
• This Compact regulator combines first and second stage regulators into a single unit
• Designed to reduce container pressure down to 11" w.c. delivery pressure
• Its’ compact design makes it the ideal choice for small domestic applications
• Equipped with 1/8" FNPT gauge taps on inlet and outlet for easy system pressure checks
• UL Listed

TECHNICAL DATA SHEET

INSTALLATION DATA SHEET

Specifications:
• Inlet: 1/4 F NPT
• Outlet: 1/2 F NPT
• Delivery Pressure: 11" W.C. @ 250 PSI
• Vent 2nd Stage: Over Outlet
• Capacity BTU/Hr Propane: 1,000,000
• EFV: No
• TO BE INSTALLED BY LICENSED GAS FITTERS ONLY
• Weight: 1.80 lbs

Fairview GAS-FLO® GR-92812C Compact Low Pressure LP Gas Second Stage Regulator 1/2 F NPT In x 3/4 F NPT Out 1,200,000 BTU/HR. Fairview's Compact Low Pressure Lp Gas Second Stage Regulators provide the highest gas flows available in a compact design

Features:
• Second Stage regulators are designed to reduce the pressure from a First-Stage regulator
• Its’ compact design makes it the ideal choice for small domestic applications
• These adjustable regulators are factory set at 11" w.c. with first stage inlet pressure of 10 psig
• Equipped with integral relief valve and built-in 1/8" FNPT gauge tap
• UL Listed

TECHNICAL DATA SHEET

INSTALLATION DATA SHEET

Specifications:
• Inlet: 1/2 F NPT
• Outlet: 3/4 F NPT
• Delivery Pressure: 11" W.C. @ 10 PSI
• Vent Position: Over Inlet
• Capacity BTU/Hr Propane: 1,200,000
• Mount: Standard
• TO BE INSTALLED BY LICENSED GAS FITTERS ONLY
• Weight: 1.60 lbs

Fairview GAS-FLO® GR-9288C Compact Low Pressure LP Gas Second Stage Regulator 1/2 F NPT In x 1/2 F NPT Out 1,200,000 BTU/HR. Fairview's Compact Low Pressure Lp Gas Second Stage Regulators provide the highest gas flows available in a compact design

Features:
• Second Stage regulators are designed to reduce the pressure from a First-Stage regulator
• Its’ compact design makes it the ideal choice for small domestic applications
• These adjustable regulators are factory set at 11" w.c. with first stage inlet pressure of 10 psig
• Equipped with integral relief valve and built-in 1/8" FNPT gauge tap
• UL Listed

TECHNICAL DATA SHEET

INSTALLATION DATA SHEET

Specifications:
• Inlet: 1/2 F NPT
• Outlet: 1/2 F NPT
• Delivery Pressure: 11" W.C. @ 10 PSI
• Vent Position: Over Inlet
• Capacity BTU/Hr Propane: 1,200,000
• Mount: Standard
• TO BE INSTALLED BY LICENSED GAS FITTERS ONLY
• Weight: 1.60 lbs

Fairview GAS-FLO® GR-800 Single Stage Low Pressure LP Gas Regulator 1/4 FPT In x 3/8 FPT Out 175,000 BTU/HR. Fairview's GAS-FLO® Single Stage, Compact LP-Gas Regulators are rated to 175,000 BTU/hr

Features:
• The model GR-800 regulator incorporates a drip lip vent and is ideally suited for use with portable appliances
• Zinc Die Cast
• Molded Rubber Diaphragms
• Underwriters Laboratories Listed
• Integral Pressure Relief

TECHNICAL DATA SHEET

Specifications:
• Inlet: 1/4 FPT
• Outlet: 3/8 FPT
• Vent Position: Drip Lip Vent Above Outlet
• Capacity BTU/Hr Propane: 175,000
• TO BE INSTALLED BY LICENSED GAS FITTERS ONLY
• Weight: 0.60 lbs

Fairview GAS-FLO® GR-360 High Pressure Pounds-To-Pounds LP Gas Regulator 1/4 FPT 2,000,000 BTU/HR 0-60 PSIG Range. Fairview's GAS-FLO® Lbs to Lbs adjustable LP-Gas Regulators are ideal for LP torches and other high flow applications

Applications:
• Designed for cylinder systems in liquid or vapor service
• Delivery pressures are adjustable from 0-60 PSI
• Ideally suited for a variety of industrial applications
• Torches • Construction Heaters • Fish Cookers • Tar Pot Heaters • Flame Cultivators
• UL Listed

TECHNICAL DATA SHEET

Specifications:
• Inlet: 1/4 FPT
• Outlet: 1/4 FPT
• Delivery Pressure Range: 0-60 PSIG
• Outlet Pressure (Set Point): 60 PSIG
• Maximum Inlet Pressure: 250 PSIG
• Capacity BTU/Hr Propane: 2,000,000
• Gauge Port: 1/4 FPT (Plugged)
• TO BE INSTALLED BY LICENSED GAS FITTERS ONLY
• Weight: 1.30 lbs

Fairview GAS-FLO® GR-918C Compact High Pressure LP Gas First Stage Regulator Female POL In x 1/2 F NPT Out 2,400,000 BTU/HR. Fairview's Compact High Pressure Lp Gas First Stage Regulators provide the highest gas flows available in a compact design

Features:
• Compact First-Stage regulators are designed for use as the first regulator of a Two-Stage regulation system
• Its’ compact design makes it the ideal choice for small domestic applications
• This large capacity adjustable First Stage regulator is factory set at 10 PSIG
• Equipped with integral relief valve and built-in 1/8" FNPT gauge tap
• UL Listed

TECHNICAL DATA SHEET

INSTALLATION DATA SHEET

Specifications:
• Inlet: Female POL
• Outlet: 1/2 F NPT
• Delivery Pressure: 10 PSI
• Inlet Pressure: 250 PSI
• Bonnet Vent: Over outlet
• Capacity BTU/Hr Propane: 2,400,000
• TO BE INSTALLED BY LICENSED GAS FITTERS ONLY
• Weight: 1.95 lbs

Fairview GAS-FLO® GR-9148C Compact High Pressure LP Gas First Stage Regulator 1/4 F NPT In x 1/2 F NPT Out 2,400,000 BTU/HR. Fairview's Compact High Pressure Lp Gas First Stage Regulators provide the highest gas flows available in a compact design

Features:
• Compact First-Stage regulators are designed for use as the first regulator of a Two-Stage regulation system
• Its’ compact design makes it the ideal choice for small domestic applications
• This large capacity adjustable First Stage regulator is factory set at 10 PSIG
• Equipped with integral relief valve and built-in 1/8" FNPT gauge tap
• UL Listed

TECHNICAL DATA SHEET

INSTALLATION DATA SHEET

Specifications:
• Inlet: 1/4 F NPT
• Outlet: 1/2 F NPT
• Delivery Pressure: 10 PSI
• Inlet Pressure: 250 PSI
• Bonnet Vent: Over outlet
• Capacity BTU/Hr Propane: 2,400,000
• TO BE INSTALLED BY LICENSED GAS FITTERS ONLY
• Weight: 1.85 lbs

Fairview GAS-FLO® GR-330 High Pressure Pounds-To-Pounds LP Gas Regulator 1/4 FPT 1,500,000 BTU/HR. Fairview's GAS-FLO® Lbs to Lbs adjustable LP-Gas Regulators are ideal for LP torches and other high flow applications

Applications:
• Designed for cylinder systems in liquid or vapor service
• Delivery pressures are adjustable from 0-30 PSI
• Ideally suited for a variety of industrial applications
• Torches • Construction Heaters • Fish Cookers • Tar Pot Heaters • Flame Cultivators
• UL Listed

TECHNICAL DATA SHEET

Specifications:
• Inlet: 1/4 FPT
• Outlet: 1/4 FPT
• Delivery Pressure Range: 0-30 PSIG
• Outlet Pressure (Set Point): 30 PSIG
• Maximum Inlet Pressure: 250 PSIG
• Capacity BTU/Hr Propane: 1,500,000
• Gauge Port: 1/4 FPT (Plugged)
• TO BE INSTALLED BY LICENSED GAS FITTERS ONLY
• Weight: 1.30 lbs

Fairview GAS-FLO® GR-630B Single Stage Hi-Pressure RV Camper LP / Propane Gas Regulator 1/4 FPT 500,000 BTU/HR. This Fairview's GAS-FLO® High Pressure LP Regulator has outlet setting 30 PSIG

Applications:
• Ideally suited for applications where pounds instead of inches of w.c. are required
• Factory pre-set 30 PSIG
• Used on Gas Grills, Smokers and Fish Cookers
• UL Listed

TECHNICAL DATA SHEET

Specifications:
• Inlet: 1/4 FPT
• Outlet: 1/4 FPT
• Outlet Pressure (Set Point): 30 PSIG
• Inlet Pressure: 100 PSIG
• Capacity At 10% Droop from set point BTU/Hr: 500,000
• TO BE INSTALLED BY LICENSED GAS FITTERS ONLY
• Weight: 0.45 lbs

Fairview GAS-FLO™ 1/4” ID x 60” AOL Type 1 Thermoplastic Propane Hose Assembly with 1”-20 Swivel Male Cylinder Thread x QCC1 Fittings. Fairview's Type 1 Thermoplastic MC X QCC Assemblies are CSA certified to 350 PSI WP -40°F To 140°F

Applications:
• Used To Conduct Natural Gas In A Gaseous State And Propane In Either A Liquid Or Gaseous State Up To 350 P.S.I
• UL/CSA Approved Type 1 Propane/Nat Gas Assy (Type 1 Assy)

TECHNICAL DATA SHEET

Specifications:
• Hose ID: 1/4”
• Assembly Overall Length: 60” (Tolerance ±1% of length measured to the nearest 1/8 of an inch)
• Temperature: -40°F to +140°F
• Hose Color: Black
• Max Pressure: 350 PSI
• End: 1”-20 Swivel Male Cylinder Thread
• End: Black QCC1 ACME
• TO BE INSTALLED BY LICENSED GAS FITTERS ONLY
• Weight: 0.80 lbs

Fairview GAS-FLO™ 1/4” ID x 120” AOL Type 1 Thermoplastic Propane Hose Assembly with 1”-20 Swivel Male Cylinder Thread x QCC1 Fittings. Fairview's Type 1 Thermoplastic MC X QCC Assemblies are CSA certified to 350 PSI WP -40°F To 140°F

Applications:
• Used To Conduct Natural Gas In A Gaseous State And Propane In Either A Liquid Or Gaseous State Up To 350 P.S.I
• UL/CSA Approved Type 1 Propane/Nat Gas Assy (Type 1 Assy)

TECHNICAL DATA SHEET

Specifications:
• Hose ID: 1/4”
• Assembly Overall Length: 120” (Tolerance ±1% of length measured to the nearest 1/8 of an inch)
• Temperature: -40°F to +140°F
• Hose Color: Black
• Max Pressure: 350 PSI
• End: 1”-20 Swivel Male Cylinder Thread
• End: Black QCC1 ACME
• TO BE INSTALLED BY LICENSED GAS FITTERS ONLY
• Weight: 1.20 lbs

Fairview GAS-FLO™ CP-2736 3/8” OD x 36” Short Nose POL x Short Nose POL Copper Propane Gas Hogtail. Fairview's Short POL To Short POL Copper hogtails are ideal for use with Propane Gas

Applications:
• Propane gas copper pigtails and hogtails provide a flexible connection between the container valve and the regulator
• Solder connections Copper tube for HOGTAILS is 3/8" O.D. by .049 WALL
• Usage depends on application and requirements
• With soldered ends and a wide selection of connections and lengths

TECHNICAL DATA SHEET

INSTALLATION DATA SHEET

Specifications:
• Tube OD: 3/8”
• Approx. Length: 36”
• Tube Material: Copper
• End: Short Nose P.O.L
• End: Short Nose P.O.L
• TO BE INSTALLED BY LICENSED GAS FITTERS ONLY
• Weight: 0.85 lbs

Fairview GAS-FLO™ CP-2412 1/4” OD x 12” Short Nose POL x 1/4 MPT Copper Propane Gas Pigtail. Fairview's Short POL To 1/4 MPT Copper pigtails are ideal for use with Propane Gas

Applications:
• Propane gas copper pigtails and hogtails provide a flexible connection between the container valve and the regulator
• Solder connections Copper tube for PIGTAILS is 1/4" O.D. by .049 WALL
• Usage depends on application and requirements
• With soldered ends and a wide selection of connections and lengths

TECHNICAL DATA SHEET

INSTALLATION DATA SHEET

Specifications:
• Tube OD: 1/4”
• Approx. Length: 12”
• Tube Material: Copper
• End: Short Nose P.O.L
• End: 1/4 MPT
• TO BE INSTALLED BY LICENSED GAS FITTERS ONLY
• Weight: 0.30 lbs

Fairview GAS-FLO™ CP-2620 1/4” OD x 20” Long Nose POL (7/8 Hex nut) x 1/4 Swivel Male Inverted Flare Copper Propane Gas Pigtail. Fairview's Long POL To 1/4 Inverted Flare Copper pigtails are ideal for use with Propane Gas

Applications:
• Propane gas copper pigtails and hogtails provide a flexible connection between the container valve and the regulator
• Solder connections Copper tube for PIGTAILS is 1/4" O.D. by .049 WALL
• Usage depends on application and requirements
• With soldered ends and a wide selection of connections and lengths

TECHNICAL DATA SHEET

INSTALLATION DATA SHEET

Specifications:
• Tube OD: 1/4”
• Approx. Length: 20”
• Tube Material: Copper
• End: Long Nose P.O.L (7/8 Hex nut)
• End: 1/4 Swivel Male Inverted Flare
• TO BE INSTALLED BY LICENSED GAS FITTERS ONLY
• Weight: 0.40 lbs

Fairview GAS-FLO™ CP-2420 1/4” OD x 20” Short Nose POL x 1/4 MPT Copper Propane Gas Pigtail. Fairview's Short POL To 1/4 MPT Copper pigtails are ideal for use with Propane Gas

Applications:
• Propane gas copper pigtails and hogtails provide a flexible connection between the container valve and the regulator
• Solder connections Copper tube for PIGTAILS is 1/4" O.D. by .049 WALL
• Usage depends on application and requirements
• With soldered ends and a wide selection of connections and lengths

TECHNICAL DATA SHEET

INSTALLATION DATA SHEET

Specifications:
• Tube OD: 1/4”
• Approx. Length: 20”
• Tube Material: Copper
• End: Short Nose P.O.L
• End: 1/4 MPT
• TO BE INSTALLED BY LICENSED GAS FITTERS ONLY
• Weight: 0.40 lbs

Fairview GAS-FLO™ CP-2048 1/4” OD x 48” Short Nose POL x Short Nose POL Copper Propane Gas Pigtail. Fairview's Short POL To Short POL Copper pigtails are ideal for use with Propane Gas

Applications:
• Propane gas copper pigtails and hogtails provide a flexible connection between the container valve and the regulator
• Solder connections Copper tube for PIGTAILS is 1/4" O.D. by .049 WALL
• Usage depends on application and requirements
• With soldered ends and a wide selection of connections and lengths

TECHNICAL DATA SHEET

INSTALLATION DATA SHEET

Specifications:
• Tube OD: 1/4”
• Approx. Length: 48”
• Tube Material: Copper
• End: Short Nose P.O.L
• End: Short Nose P.O.L
• TO BE INSTALLED BY LICENSED GAS FITTERS ONLY
• Weight: 0.80 lbs

Fairview QD-GMRVN4-4M GAS-FLO™ 1/4” Nipple x 1/4” MPT CSA RV Gas Quick Disconnect. Fairview's Recreational Vehicle Gas QDs are CSA Certied up to 60 PSI WP

Features:
• C.S.A. (C.G.A. / A.G.A.) design certified for natural gas and L.P. gas - air mixtures
• Full flow plug for quick connect and disconnect of R.V. style coupler

TECHNICAL DATA SHEET

INSTALLATION INSTRUCTIONS

Specifications:
• Nipple (Body Size): 1/4
• Male Pipe Thread: 1/4
• Material: Brass
• Weight: 1.0 oz

Fairview WR-RV55 Lead-Free RV Water Pressure Regulator 55 PSI. Fairview's Lead-Free R.V. Water Pressure Regulator offers the highest water flow available while maintaining 55 PSI WP Max

Features:
• Lead-Free design
• Keeps outlet pressure at 55 PSI
• Highest water flow available
• Screened washer filters debris
• Fits all standard water hose and riser connections
• Heavy-Duty impact resistant design

Specifications:
• Connections: FWH X MWH
• Weight: 8.2 oz

Fairview QD-RVSDC-4 GAS-FLO™ Dust Plug for QD-GMRVC4-4F Quick Disconnect Coupler

Features:
• Fairview's LPG/Nat. Gas Nipple Dust Caps Help Protect QD-GMC Series QD's when they are not in use

TECHNICAL DATA SHEET

Specifications:
• Color: Yellow
• Material: Plastic
• Weight: 0.3 oz

Fairview GAS-FLO™ CP-2020 1/4” OD x 20” Short Nose POL x Short Nose POL Copper Propane Gas Pigtail. Fairview's Short POL To Short POL Copper pigtails are ideal for use with Propane Gas

Applications:
• Propane gas copper pigtails and hogtails provide a flexible connection between the container valve and the regulator
• Solder connections Copper tube for PIGTAILS is 1/4" O.D. by .049 WALL
• Usage depends on application and requirements
• With soldered ends and a wide selection of connections and lengths

TECHNICAL DATA SHEET

INSTALLATION DATA SHEET

Specifications:
• Tube OD: 1/4”
• Approx. Length: 20”
• Tube Material: Copper
• End: Short Nose P.O.L
• End: Short Nose P.O.L
• TO BE INSTALLED BY LICENSED GAS FITTERS ONLY
• Weight: 0.50 lbs

Fairview QD-GMN6-6F GAS-FLO™ 3/8” Nipple x 3/8” FPT LPG/Nat. Gas Quick Disconnect. Fairview's CSA LPG/Nat. Gas Nipples are CSA Certified up to 60 PSI WP

Features:
• C.S.A. GAS INTERCHANGE QUICK DISCONNECTS (QD-GMC)
• CSA certified to Z21.41/CSA6.9 for Natural Gas and LP-Gas – air mixtures
• QD-GMC Quick Disconnects Rated To 60 P.S.I.
• QD-GMC Sizes 1/4, 3/8, 1/2 & 3/4 Quick Disconnects Are Rated To A Temperature -40°F

TECHNICAL DATA SHEET

INSTALLATION INSTRUCTIONS

Specifications:
• Nipple (Body Size): 3/8
• Female Pipe Thread: 3/8
• Quick Disconnect BTU Capacity: 85,000
• Material: Brass
• Weight: 1.4 oz

Fairview GAS-FLO™ 3/8” ID x 144” Thermoplastic Grey Natural Gas Grill / BBQ Hose Assembly with 3/8" Female S.A.E. Swivel X 3/8" Quick Disconnects. Fairview's Grey Thermoplastic Natural Gas Grill Assemblies are CSA Certified to Standard ANSI Z21.54 C.G.A. 8.4 (Thermoplastic) Used To Conduct Natural Gas / Propane In A Gaseous State Up To 1/2 P.S.I. 80,000 BTU/Hr. Capacity Natural Gas

Applications:
• Used To Conduct Natural Gas And Propane In A Gaseous State
• Assemblies come complete with dust plug and cap. Remove “PC” If not required

TECHNICAL DATA SHEET

INSTALLATION INSTRUCTIONS

Specifications:
• Hose ID: 3/8”
• Approx. Hose Length: 144”
• BTU/Hr: 80,000
• Color: Grey
• End: 3/8” Female SAE Swivel
• End: 3/8” QD Nipple
• Included: 3/8” QD Coupler with Plug & Cap
• TO BE INSTALLED BY LICENSED GAS FITTERS ONLY
• Weight: 1.80 lbs

Fairview QD-GMRVC4-4F GAS-FLO™ 1/4” Ball Vale Coupler x 1/4” FPT CSA RV Gas Quick Disconnect. Fairview's Recreational Vehicle Valved Gas QD’s are CSA Certified up to 60 PSI WP

Features:
• C.S.A. (C.G.A. / A.G.A.) design certified for natural gas and L.P. gas - air mixtures
• For quick connect and disconnect of LP gas hose to camper/RV cooking stoves

TECHNICAL DATA SHEET

INSTALLATION INSTRUCTIONS

Specifications:
• Coupler (Body Size): 1/4
• Female Pipe Thread: 1/4
• Material: Brass
• Weight: 4.2 oz

Fairview QD-GMN8-8F GAS-FLO™ 1/2” Nipple x 1/2” FPT LPG/Nat. Gas Quick Disconnect. Fairview's CSA LPG/Nat. Gas Nipples are CSA Certified up to 60 PSI WP

Features:
• C.S.A. GAS INTERCHANGE QUICK DISCONNECTS (QD-GMC)
• CSA certified to Z21.41/CSA6.9 for Natural Gas and LP-Gas – air mixtures
• QD-GMC Quick Disconnects Rated To 60 P.S.I.
• QD-GMC Sizes 1/4, 3/8, 1/2 & 3/4 Quick Disconnects Are Rated To A Temperature -40°F

TECHNICAL DATA SHEET

INSTALLATION INSTRUCTIONS

Specifications:
• Nipple (Body Size): 1/2
• Female Pipe Thread: 1/2
• Quick Disconnect BTU Capacity: 120,000
• Material: Brass
• Weight: 2.8 oz

Fairview QD-GMC8-8F GAS-FLO™ 1/2” Coupler x 1/2” FPT LPG/Nat. Gas Quick Disconnect. Fairview's CSA LPG/Nat. Gas Couplers are CSA Certified up to 60 PSI WP

Features:
• C.S.A. GAS INTERCHANGE QUICK DISCONNECTS (QD-GMC)
• CSA certified to Z21.41/CSA6.9 for Natural Gas and LP-Gas – air mixtures
• All QD-GMC Quick Disconnects Rated To 60 P.S.I.
• QD-GMC Sizes 1/4, 3/8, 1/2 & 3/4 Quick Disconnects Are Rated To A Temperature -40°F

TECHNICAL DATA SHEET

INSTALLATION INSTRUCTIONS

Specifications:
• Coupler (Body Size): 1/2
• Female Pipe Thread: 1/2
• Quick Disconnect BTU Capacity: 120,000
• Material: Brass
• Weight: 7.4 oz

Fairview QD-GMC6-6F GAS-FLO™ 3/8” Coupler x 3/8” FPT LPG/Nat. Gas Quick Disconnect. Fairview's CSA LPG/Nat. Gas Couplers are CSA Certified up to 60 PSI WP

Features:
• C.S.A. GAS INTERCHANGE QUICK DISCONNECTS (QD-GMC)
• CSA certified to Z21.41/CSA6.9 for Natural Gas and LP-Gas – air mixtures
• All QD-GMC Quick Disconnects Rated To 60 P.S.I.
• QD-GMC Sizes 1/4, 3/8, 1/2 & 3/4 Quick Disconnects Are Rated To A Temperature -40°F

TECHNICAL DATA SHEET

INSTALLATION INSTRUCTIONS

Specifications:
• Coupler (Body Size): 3/8
• Female Pipe Thread: 3/8
• Quick Disconnect BTU Capacity: 85,000
• Material: Brass
• Weight: 3.3 oz

Fairview GAS-FLO™ 24" QCC1 Propane Gas Grill Hose & Regulator Replacement Kit. Fairview's QCC1 X F.SAE BBQ Regulator Assemblies are CSA certified to 1 PSI WP (-40°F/-40°C)

Applications:
• Low Pressure regulator fits most gas grills
• QCC1 Connection to 3/8” 45° SAE Female Swivel Flare

TECHNICAL DATA SHEET

TECHNICAL DATA SHEET

INSTALLATION INSTRUCTIONS

Specifications:
• Hose: Thermoplastic
• Hose Length: 24”
• Regulator: Fairview GR-766
• End: QCC1 ACME
• End: 3/8” 45° SAE Female Swivel Flare
• TO BE INSTALLED BY LICENSED GAS FITTERS ONLY
• Weight: 0.70 lbs

Fairview GAS-FLO™ 1/4” ID x 48” AOL Type 1 Thermoplastic Propane Hose Assembly with RV QD Coupler x QD Nipple Fittings Fairview's Type 1 Thermoplastic RV Outside Appliance Quick Disconnect Hoses are CSA Certified to 350 PSI WP -40°F To 140°F

Applications:
• Used To Conduct Natural Gas In A Gaseous State And Propane In Either A Liquid Or Gaseous State Up To 350 P.S.I
• UL/CSA Approved Type 1 Propane/Nat Gas Assy (Type 1 Assy)

TECHNICAL DATA SHEET

INSTALLATION INSTRUCTIONS

Specifications:
• Hose ID: 1/4”
• Assembly Overall Length: 48” (Tolerance ±1% of length measured to the nearest 1/8 of an inch)
• Temperature: -40°F to +140°F
• Color: Black
• Max Pressure: 350 PSI
• End: 1/4” Brass RV QD Coupler
• End: 1/4” Brass RV QD Nipple
• TO BE INSTALLED BY LICENSED GAS FITTERS ONLY
• Weight: 0.60 lbs

Fairview GAS-FLO™ 1/4” ID x 96” AOL Type 1 Thermoplastic Propane Hose Assembly with RV QD Coupler x QD Nipple Fittings Fairview's Type 1 Thermoplastic RV Outside Appliance Quick Disconnect Hoses are CSA Certified to 350 PSI WP -40°F To 140°F

Applications:
• Used To Conduct Natural Gas In A Gaseous State And Propane In Either A Liquid Or Gaseous State Up To 350 P.S.I
• UL/CSA Approved Type 1 Propane/Nat Gas Assy (Type 1 Assy)

TECHNICAL DATA SHEET

INSTALLATION INSTRUCTIONS

Specifications:
• Hose ID: 1/4”
• Assembly Overall Length: 96” (Tolerance ±1% of length measured to the nearest 1/8 of an inch)
• Temperature: -40°F to +140°F
• Color: Black
• Max Pressure: 350 PSI
• End: 1/4” Brass RV QD Coupler
• End: 1/4” Brass RV QD Nipple
• TO BE INSTALLED BY LICENSED GAS FITTERS ONLY
• Weight: 0.95 lbs

Fairview GAS-FLO™ 36" QCC1 Propane Gas Grill Hose & Regulator Replacement Kit. Fairview's QCC1 X F.SAE BBQ Regulator Assemblies are CSA certified to 1 PSI WP (-40°F/-40°C)

Applications:
• Low Pressure regulator fits most gas grills
• QCC1 Connection to 3/8” 45° SAE Female Swivel Flare

TECHNICAL DATA SHEET

TECHNICAL DATA SHEET

INSTALLATION INSTRUCTIONS

Specifications:
• Hose: Thermoplastic
• Hose Length: 36”
• Regulator: Fairview GR-766
• End: QCC1 ACME
• End: 3/8” 45° SAE Female Swivel Flare
• TO BE INSTALLED BY LICENSED GAS FITTERS ONLY
• Weight: 0.75 lbs

Fairview GAS-FLO™ 1/4” ID x 96” AOL Type 1 Thermoplastic Propane Hose Assembly with 1/4” Male Pipe x RV QD Nipple Fittings. Fairview's Type 1 Thermoplastic RVQD Extension Assemblies are CSA Certified to 350 PSI WP -40°F To 140°F

Applications:
• Used To Conduct Natural Gas In A Gaseous State And Propane In Either A Liquid Or Gaseous State Up To 350 P.S.I
• UL/CSA Approved Type 1 Propane/Nat Gas Assy (Type 1 Assy)

TECHNICAL DATA SHEET

INSTALLATION INSTRUCTIONS

Specifications:
• Hose ID: 1/4”
• Assembly Overall Length: 96” (Tolerance ±1% of length measured to the nearest 1/8 of an inch)
• Temperature: -40°F to +140°F
• Color: Black
• Max Pressure: 350 PSI
• End: 1/4” Brass Male Pipe
• End: 1/4” Brass RV QD Nipple
• TO BE INSTALLED BY LICENSED GAS FITTERS ONLY
• Weight: 0.75 lbs

Fairview GAS-FLO™ 1/4” ID x 48” AOL Type 1 Thermoplastic Propane Hose Assembly with 1/4” Male Pipe x RV QD Nipple Fittings. Fairview's Type 1 Thermoplastic RVQD Extension Assemblies are CSA Certified to 350 PSI WP -40°F To 140°F

Applications:
• Used To Conduct Natural Gas In A Gaseous State And Propane In Either A Liquid Or Gaseous State Up To 350 P.S.I
• UL/CSA Approved Type 1 Propane/Nat Gas Assy (Type 1 Assy)

TECHNICAL DATA SHEET

INSTALLATION INSTRUCTIONS

Specifications:
• Hose ID: 1/4”
• Assembly Overall Length: 48” (Tolerance ±1% of length measured to the nearest 1/8 of an inch)
• Temperature: -40°F to +140°F
• Color: Black
• Max Pressure: 350 PSI
• End: 1/4” Brass Male Pipe
• End: 1/4” Brass RV QD Nipple
• TO BE INSTALLED BY LICENSED GAS FITTERS ONLY
• Weight: 0.40 lbs

Fairview GAS-FLO™ 3/8” ID x 600” AOL Type 1 Rubber Propane Hose Assembly with 3/8” 45° SAE Female Swivel Flare x 3/8” 45° SAE Female Swivel Flare Fittings. Fairview's Type 1 Rubber F.SAE Assemblies are CSA Certified to 350 PSI WP -60°F To 212°F

Applications:
• Used To Conduct Natural Gas In A Gaseous State And Propane In Either A Liquid Or Gaseous State Up To 350 P.S.I
• UL/CSA Approved Type 1 Propane/Nat Gas Assy (Type 1 Assy)

TECHNICAL DATA SHEET

Specifications:
• Hose ID: 3/8”
• Assembly Overall Length: 600” (Tolerance ±1% of length measured to the nearest 1/8 of an inch)
• Temperature: -60°F to +212°F
• Color: Black
• Max Pressure: 350 PSI
• End: 3/8” Brass 45° SAE Female Swivel Flare
• End: 3/8” Brass 45° SAE Female Swivel Flare
• TO BE INSTALLED BY LICENSED GAS FITTERS ONLY
• Weight: 7.50 lbs

Fairview GAS-FLO™ 1/4” ID x 18” AOL Type 1 Rubber Propane Hose Assembly with 1/4” Male Inverted Flare x POL Fittings. Fairview's Type 1 Rubber POL Pigtails are CSA Certified to 350 PSI WP -60°F To 212°F

Applications:
• Used To Conduct Natural Gas In A Gaseous State And Propane In Either A Liquid Or Gaseous State Up To 350 P.S.I
• UL/CSA Approved Type 1 Propane/Nat Gas Assy (Type 1 Assy)

TECHNICAL DATA SHEET

INSTALLATION INSTRUCTIONS

Specifications:
• Hose ID: 1/4”
• Assembly Overall Length: 18” (Tolerance ± 1/4 of an inch)
• Temperature: -60°F to +212°F
• Color: Black
• Max Pressure: 350 PSI
• End: 1/4” Brass Male Inverted Flare
• End: POL
• TO BE INSTALLED BY LICENSED GAS FITTERS ONLY
• Weight: 0.35 lbs

Fairview GAS-FLO™ 1/4” ID x 12” AOL Type 1 Thermoplastic Propane Hose Assembly with 1/4” Male Inverted Flare x POL Fittings. Fairview's Type 1 Thermoplastic POL Pigtails are CSA Certified to 350 PSI WP -40°F To 140°F

Applications:
• Used To Conduct Natural Gas In A Gaseous State And Propane In Either A Liquid Or Gaseous State Up To 350 P.S.I
• UL/CSA Approved Type 1 Propane/Nat Gas Assy (Type 1 Assy)

TECHNICAL DATA SHEET

INSTALLATION INSTRUCTIONS

Specifications:
• Hose ID: 1/4”
• Assembly Overall Length: 12” (Tolerance ± 1/4 of an inch)
• Temperature: -40°F to +140°F
• Color: Black
• Max Pressure: 350 PSI
• End: 1/4” Brass Male Inverted Flare
• End: POL
• TO BE INSTALLED BY LICENSED GAS FITTERS ONLY
• Weight: 0.30 lbs

Fairview GAS-FLO™ 1/4” ID x 12” AOL Type 1 Thermoplastic Propane Hose Assembly with 1/4” Male Inverted Flare x QCC Fittings. Fairview's Type 1 Thermoplastic QCC Pigtails are CSA Certified to 350 PSI WP -40°F To 140°F

Applications:
• Used To Conduct Natural Gas In A Gaseous State And Propane In Either A Liquid Or Gaseous State Up To 350 P.S.I
• UL/CSA Approved Type 1 Propane/Nat Gas Assy (Type 1 Assy)

TECHNICAL DATA SHEET

INSTALLATION INSTRUCTIONS

Specifications:
• Hose ID: 1/4”
• Assembly Overall Length: 12” (Tolerance ± 1/4 of an inch)
• Temperature: -40°F to +140°F
• Color: Black
• Max Pressure: 350 PSI
• End: 1/4” Brass Male Inverted Flare
• End: QCC1 ACME
• TO BE INSTALLED BY LICENSED GAS FITTERS ONLY
• Weight: 0.30 lbs

Fairview GAS-FLO™ 1/4” ID x 15” AOL Type 1 Thermoplastic Propane Hose Assembly with 1/4” Male Inverted Flare x QCC Fittings. Fairview's Type 1 Thermoplastic QCC Pigtails are CSA Certified to 350 PSI WP -40°F To 140°F

Applications:
• Used To Conduct Natural Gas In A Gaseous State And Propane In Either A Liquid Or Gaseous State Up To 350 P.S.I
• UL/CSA Approved Type 1 Propane/Nat Gas Assy (Type 1 Assy)

TECHNICAL DATA SHEET

INSTALLATION INSTRUCTIONS

Specifications:
• Hose ID: 1/4”
• Assembly Overall Length: 15” (Tolerance ± 1/4 of an inch)
• Temperature: -40°F to +140°F
• Color: Black
• Max Pressure: 350 PSI
• End: 1/4” Brass Male Inverted Flare
• End: QCC1 ACME
• TO BE INSTALLED BY LICENSED GAS FITTERS ONLY
• Weight: 0.30 lbs

Fairview SR525-6C 3/8 ID x 3/8 Male Pipe Steel Reusable Hose End for use with S.A.E. 100R5 (NON-SKIVE) hose

TECHNICAL DATA SHEET

INSTALLATION DATA SHEET

Specifications:
• Steel Reusable Hose Ends for use with S.A.E. 100R5 (NON-SKIVE) hose
• Medium pressure service in the handling of most hydraulic fluids, gasoline, diesel fuels, lubricating oils and water
• Working Temperature: -40°F to +250°F, -40°C to +121°C
• Working Pressure: Are hose size dependent

Fairview SR525-8D 1/2 ID x 1/2 Male Pipe Steel Reusable Hose End for use with S.A.E. 100R5 (NON-SKIVE) hose

TECHNICAL DATA SHEET

INSTALLATION DATA SHEET

Specifications:
• Steel Reusable Hose Ends for use with S.A.E. 100R5 (NON-SKIVE) hose
• Medium pressure service in the handling of most hydraulic fluids, gasoline, diesel fuels, lubricating oils and water
• Working Temperature: -40°F to +250°F, -40°C to +121°C
• Working Pressure: Are hose size dependent

Fairview SRT125-6C 3/8 ID x 3/8 Male Pipe Steel Reusable Hose End s for use with S.A.E. 100R1-AT (NON-SKIVE) hose

TECHNICAL DATA SHEET

INSTALLATION DATA SHEET

Specifications:
• Steel Reusable Hose Ends for use with S.A.E. 100R1-AT (NON-SKIVE) hose
• Medium to high pressure service in the handling of most hydraulic fluids, gasoline, diesel fuels, lubricating oils and water
• Working Temperature: -40°F to +250°F, -40°C to +121°C
• Working Pressure: Are hose size dependent

Fairview SRT225-6C 3/8 ID x 3/8 Male Pipe Steel Reusable Hose End s for use with S.A.E. 100R2-AT (NON-SKIVE) hose

TECHNICAL DATA SHEET

INSTALLATION DATA SHEET

Specifications:
• Steel Reusable Hose Ends for use with S.A.E. 100R2-AT (NON-SKIVE) hose
• High pressure service in the handling of most hydraulic fluids, gasoline, diesel fuels, lubricating oils and water
• Working Temperature: -40°F to +250°F, -40°C to +121°C
• Working Pressure: Are hose size dependent

Fairview RV-TANK-KIT24BLK Dual Tank Mounting Kit for 30 lbs Vertical LP Gas Tanks. Fairview's Tank Pan Kit Components are designed to fit 30LB RV Propane Tanks

Specifications:
• (1) Threaded bar for 30 lb
• (1) Top hold down bar
• (1) Black double tank pan
• (1) Galvanized wingnut
• Weight: 7.60 lbs

Fairview SR525-4B 1/4 ID x 1/4 Male Pipe Steel Reusable Hose End for use with S.A.E. 100R5 (NON-SKIVE) hose

TECHNICAL DATA SHEET

INSTALLATION DATA SHEET

Specifications:
• Steel Reusable Hose Ends for use with S.A.E. 100R5 (NON-SKIVE) hose
• Medium pressure service in the handling of most hydraulic fluids, gasoline, diesel fuels, lubricating oils and water
• Working Temperature: -40°F to +250°F, -40°C to +121°C
• Working Pressure: Are hose size dependent

Fairview SRT125-4B 1/4 ID x 1/4 Male Pipe Steel Reusable Hose End s for use with S.A.E. 100R1-AT (NON-SKIVE) hose

TECHNICAL DATA SHEET

INSTALLATION DATA SHEET

Specifications:
• Steel Reusable Hose Ends for use with S.A.E. 100R1-AT (NON-SKIVE) hose
• Medium to high pressure service in the handling of most hydraulic fluids, gasoline, diesel fuels, lubricating oils and water
• Working Temperature: -40°F to +250°F, -40°C to +121°C
• Working Pressure: Are hose size dependent

Fairview GAS-FLO™ 1/4” ID x 36” AOL Type 1 Thermoplastic Propane Hose Assembly with 3/8” 45° SAE Female Swivel Flare x 3/8” 45° SAE Female Swivel Flare Fittings. Fairview's Type 1 Thermoplastic F.SAE Assemblies are CSA Certified to 350 PSI WP -40°F To 140°F

Applications:
• Used To Conduct Natural Gas In A Gaseous State And Propane In Either A Liquid Or Gaseous State Up To 350 P.S.I
• UL/CSA Approved Type 1 Propane/Nat Gas Assy (Type 1 Assy)

TECHNICAL DATA SHEET

Specifications:
• Hose ID: 1/4”
• Assembly Overall Length: 36” (Tolerance ± 1/4 of an inch)
• Temperature: -40°F to +140°F
• Color: Black
• Max Pressure: 350 PSI
• End: 3/8” Brass 45° SAE Female Swivel Flare
• End: 3/8” Brass 45° SAE Female Swivel Flare
• TO BE INSTALLED BY LICENSED GAS FITTERS ONLY
• Weight: 0.40 lbs

Fairview GAS-FLO™ 3/8” ID x 36” AOL Type 1 Thermoplastic Propane Hose Assembly with 3/8” 45° SAE Female Swivel Flare x 3/8” 45° SAE Female Swivel Flare Fittings. Fairview's Type 1 Thermoplastic F.SAE Assemblies are CSA Certified to 350 PSI WP -40°F To 140°F

Applications:
• Used To Conduct Natural Gas In A Gaseous State And Propane In Either A Liquid Or Gaseous State Up To 350 P.S.I
• UL/CSA Approved Type 1 Propane/Nat Gas Assy (Type 1 Assy)

TECHNICAL DATA SHEET

Specifications:
• Hose ID: 3/8”
• Assembly Overall Length: 36” (Tolerance ±1/4 of an inch)
• Temperature: -40°F to +140°F
• Color: Black
• Max Pressure: 350 PSI
• End: 3/8” Brass 45° SAE Female Swivel Flare
• End: 3/8” Brass 45° SAE Female Swivel Flare
• TO BE INSTALLED BY LICENSED GAS FITTERS ONLY
• Weight: 0.50 lbs

Fairview GAS-FLO™ 1/4” ID x 72” AOL Type 1 Thermoplastic Propane Hose Assembly with 3/8” 45° SAE Female Swivel Flare x 3/8” 45° SAE Female Swivel Flare Fittings. Fairview's Type 1 Thermoplastic F.SAE Assemblies are CSA Certified to 350 PSI WP -40°F To 140°F

Applications:
• Used To Conduct Natural Gas In A Gaseous State And Propane In Either A Liquid Or Gaseous State Up To 350 P.S.I
• UL/CSA Approved Type 1 Propane/Nat Gas Assy (Type 1 Assy)

TECHNICAL DATA SHEET

Specifications:
• Hose ID: 1/4”
• Assembly Overall Length: 72” (Tolerance ±1% of length measured to the nearest 1/8 of an inch)
• Temperature: -40°F to +140°F
• Color: Black
• Max Pressure: 350 PSI
• End: 3/8” Brass 45° SAE Female Swivel Flare
• End: 3/8” Brass 45° SAE Female Swivel Flare
• TO BE INSTALLED BY LICENSED GAS FITTERS ONLY
• Weight: 0.65 lbs