Suttner America

Suttner ST-1500C LFT Spray Gun 4,000 PSI 12 GPM with Ceramic Ball & Stainless Steel Inlet and Outlet

Features
• High Quality, German engineered components
• LFT "Low Friction Trigger, reduces pulling force
• Designed to be “universally” comfortable, even for small hands
• Ceramic ball in valve is highly resistant against nearly all soaps and acids
• Chemical resistant valve-acid and alkali resistant PEEK seat
• FKM / Viton® seals
• Stainless steel inlet connection, including inlet pipe
• Stainless steel outlet
• Forged brass housing for maximum strength

Specifications
• Max Pressure: 4,000 PSI
• Max Flow: 12.0 GPM
• Max Temp: 300° F.
• Inlet: 3/8" Female NPT
• Outlet: 1/4" Female NPT
• Weight: 1.24 lb

Suttner ST-160 Stainless Steel Single Chemical Injector w/9 Metering / Dosing Nozzles, #10.0, 5000 PSI, 3/8" F x 3/8” M

Features
• Food grade quality and specifications
• Durable Stainless Steel housing
• 9 Metering / dosing nozzles included (See 2nd picture)
• Uses .35" I.D. Hose

Specifications
• Nozzle/Orifice Size: 10.0
• Max Flow Rate: 18 GPM
• Min Flow Rate: 1 GPM
• Max Pressure: 5,000 PSI
• Min Pressure: 1,000 PSI
• Max Temp: 194° F.
• Inlet: 3/8” Female
• Outlet: 3/8” Male
• Hose Barb: .35” ID hose
• Weight: 0.71 lb

Please use Nozzle Chart to determine proper nozzle size

Note: If between sizes, choose the larger nozzle size

Nozzle Chart

Suttner ST-160 Stainless Steel Single Chemical Injector w/9 Metering / Dosing Nozzles, #11.0, 5000 PSI, 3/8" F x 3/8” M

Features
• Food grade quality and specifications
• Durable Stainless Steel housing
• 9 Metering / dosing nozzles included (See 2nd picture)
• Uses .35" I.D. Hose

Specifications
• Nozzle/Orifice Size: 11.0
• Max Flow Rate: 18 GPM
• Min Flow Rate: 1 GPM
• Max Pressure: 5,000 PSI
• Min Pressure: 1,000 PSI
• Max Temp: 194° F.
• Inlet: 3/8” Female
• Outlet: 3/8” Male
• Hose Barb: .35” ID hose
• Weight: 0.71 lb

Please use Nozzle Chart to determine proper nozzle size

Note: If between sizes, choose the larger nozzle size

Nozzle Chart

Suttner ST-160 Stainless Steel Single Chemical Injector w/9 Metering / Dosing Nozzles, #12.0, 5000 PSI, 3/8" F x 3/8” M

Features
• Food grade quality and specifications
• Durable Stainless Steel housing
• 9 Metering / dosing nozzles included (See 2nd picture)
• Uses .35" I.D. Hose

Specifications
• Nozzle/Orifice Size: 12.0
• Max Flow Rate: 18 GPM
• Min Flow Rate: 1 GPM
• Max Pressure: 5,000 PSI
• Min Pressure: 1,000 PSI
• Max Temp: 194° F.
• Inlet: 3/8” Female
• Outlet: 3/8” Male
• Hose Barb: .35” ID hose
• Weight: 0.71 lb

Please use Nozzle Chart to determine proper nozzle size

Note: If between sizes, choose the larger nozzle size

Nozzle Chart

Suttner ST-160 Stainless Steel Single Chemical Injector w/9 Metering / Dosing Nozzles, #12.5, 5000 PSI, 3/8" F x 3/8” M

Features
• Food grade quality and specifications
• Durable Stainless Steel housing
• 9 Metering / dosing nozzles included (See 2nd picture)
• Uses .35" I.D. Hose

Specifications
• Nozzle/Orifice Size: 12.5
• Max Flow Rate: 18 GPM
• Min Flow Rate: 1 GPM
• Max Pressure: 5,000 PSI
• Min Pressure: 1,000 PSI
• Max Temp: 194° F.
• Inlet: 3/8” Female
• Outlet: 3/8” Male
• Hose Barb: .35” ID hose
• Weight: 0.71 lb

Please use Nozzle Chart to determine proper nozzle size

Note: If between sizes, choose the larger nozzle size

Nozzle Chart

Suttner ST-160 Stainless Steel Single Chemical Injector w/9 Metering / Dosing Nozzles, #14, 5000 PSI, 3/8" F x 3/8” M

Features
• Food grade quality and specifications
• Durable Stainless Steel housing
• 9 Metering / dosing nozzles included (See 2nd picture)
• Uses .35" I.D. Hose

Specifications
• Nozzle/Orifice Size: 14
• Max Flow Rate: 18 GPM
• Min Flow Rate: 1 GPM
• Max Pressure: 5,000 PSI
• Min Pressure: 1,000 PSI
• Max Temp: 194° F.
• Inlet: 3/8” Female
• Outlet: 3/8” Male
• Hose Barb: .35” ID hose
• Weight: 0.71 lb

Please use Nozzle Chart to determine proper nozzle size

Note: If between sizes, choose the larger nozzle size

Nozzle Chart

See the ST-160 System Diagram below to determine the foam components needed

ST-160 System Diagram

Suttner ST-160 Stainless Steel Single Chemical Injector w/9 Metering / Dosing Nozzles, #18.0, 5000 PSI, 3/8" F x 3/8” M

Features
• Food grade quality and specifications
• Durable Stainless Steel housing
• 9 Metering / dosing nozzles included (See 2nd picture)
• Uses .35" I.D. Hose

Specifications
• Nozzle/Orifice Size: 18.0
• Max Flow Rate: 18 GPM
• Min Flow Rate: 1 GPM
• Max Pressure: 5,000 PSI
• Min Pressure: 1,000 PSI
• Max Temp: 194° F.
• Inlet: 3/8” Female
• Outlet: 3/8” Male
• Hose Barb: .35” ID hose
• Weight: 0.71 lb

Please use Nozzle Chart to determine proper nozzle size

Note: If between sizes, choose the larger nozzle size

Nozzle Chart

Suttner ST-160 Stainless Steel Single Chemical Injector w/9 Metering / Dosing Nozzles, #3.0, 5000 PSI, 3/8" F x 3/8” M

Features
• Food grade quality and specifications
• Durable Stainless Steel housing
• 9 Metering / dosing nozzles included (See 2nd picture)
• Uses .35" I.D. Hose

Specifications
• Nozzle/Orifice Size: 3.0
• Max Flow Rate: 18 GPM
• Min Flow Rate: 1 GPM
• Max Pressure: 5,000 PSI
• Min Pressure: 1,000 PSI
• Max Temp: 194° F.
• Inlet: 3/8” Female
• Outlet: 3/8” Male
• Hose Barb: .35” ID hose
• Weight: 0.71 lb

Please use Nozzle Chart to determine proper nozzle size

Note: If between sizes, choose the larger nozzle size

Nozzle Chart

Suttner ST-160 Stainless Steel Single Chemical Injector w/9 Metering / Dosing Nozzles, #3.5, 5000 PSI, 3/8" F x 3/8” M

Features
• Food grade quality and specifications
• Durable Stainless Steel housing
• 9 Metering / dosing nozzles included (See 2nd picture)
• Uses .35" I.D. Hose

Specifications
• Nozzle/Orifice Size: 3.5
• Max Flow Rate: 18 GPM
• Min Flow Rate: 1 GPM
• Max Pressure: 5,000 PSI
• Min Pressure: 1,000 PSI
• Max Temp: 194° F.
• Inlet: 3/8” Female
• Outlet: 3/8” Male
• Hose Barb: .35” ID hose
• Weight: 0.71 lb

Please use Nozzle Chart to determine proper nozzle size

Note: If between sizes, choose the larger nozzle size

Nozzle Chart

Suttner ST-160 Stainless Steel Single Chemical Injector w/9 Metering / Dosing Nozzles, #4.0, 5000 PSI, 3/8" F x 3/8” M

Features
• Food grade quality and specifications
• Durable Stainless Steel housing
• 9 Metering / dosing nozzles included (See 2nd picture)
• Uses .35" I.D. Hose

Specifications
• Nozzle/Orifice Size: 4.0
• Max Flow Rate: 18 GPM
• Min Flow Rate: 1 GPM
• Max Pressure: 5,000 PSI
• Min Pressure: 1,000 PSI
• Max Temp: 194° F.
• Inlet: 3/8” Female
• Outlet: 3/8” Male
• Hose Barb: .35” ID hose
• Weight: 0.71 lb

Please use Nozzle Chart to determine proper nozzle size

Note: If between sizes, choose the larger nozzle size

Nozzle Chart

Suttner ST-160 Stainless Steel Single Chemical Injector w/9 Metering / Dosing Nozzles, #4.5, 5000 PSI, 3/8" F x 3/8” M

Features
• Food grade quality and specifications
• Durable Stainless Steel housing
• 9 Metering / dosing nozzles included (See 2nd picture)
• Uses .35" I.D. Hose

Specifications
• Nozzle/Orifice Size: 4.5
• Max Flow Rate: 18 GPM
• Min Flow Rate: 1 GPM
• Max Pressure: 5,000 PSI
• Min Pressure: 1,000 PSI
• Max Temp: 194° F.
• Inlet: 3/8” Female
• Outlet: 3/8” Male
• Hose Barb: .35” ID hose
• Weight: 0.71 lb

Please use Nozzle Chart to determine proper nozzle size

Note: If between sizes, choose the larger nozzle size

Nozzle Chart

Suttner ST-160 Stainless Steel Single Chemical Injector w/9 Metering / Dosing Nozzles, #5.5, 5000 PSI, 3/8" F x 3/8” M

Features
• Food grade quality and specifications
• Durable Stainless Steel housing
• 9 Metering / dosing nozzles included (See 2nd picture)
• Uses .35" I.D. Hose

Specifications
• Nozzle/Orifice Size: 5.5
• Max Flow Rate: 18 GPM
• Min Flow Rate: 1 GPM
• Max Pressure: 5,000 PSI
• Min Pressure: 1,000 PSI
• Max Temp: 194° F.
• Inlet: 3/8” Female
• Outlet: 3/8” Male
• Hose Barb: .35” ID hose
• Weight: 0.71 lb

Please use Nozzle Chart to determine proper nozzle size

Note: If between sizes, choose the larger nozzle size

Nozzle Chart

Suttner ST-160 Stainless Steel Single Chemical Injector w/9 Metering / Dosing Nozzles, #6.0, 5000 PSI, 3/8" F x 3/8” M

Features
• Food grade quality and specifications
• Durable Stainless Steel housing
• 9 Metering / dosing nozzles included (See 2nd picture)
• Uses .35" I.D. Hose

Specifications
• Nozzle/Orifice Size: 6.0
• Max Flow Rate: 18 GPM
• Min Flow Rate: 1 GPM
• Max Pressure: 5,000 PSI
• Min Pressure: 1,000 PSI
• Max Temp: 194° F.
• Inlet: 3/8” Female
• Outlet: 3/8” Male
• Hose Barb: .35” ID hose
• Weight: 0.71 lb

Please use Nozzle Chart to determine proper nozzle size

Note: If between sizes, choose the larger nozzle size

Nozzle Chart

Suttner ST-160 Stainless Steel Single Chemical Injector w/9 Metering / Dosing Nozzles, #7.0, 5000 PSI, 3/8" F x 3/8” M

Features
• Food grade quality and specifications
• Durable Stainless Steel housing
• 9 Metering / dosing nozzles included (See 2nd picture)
• Uses .35" I.D. Hose

Specifications
• Nozzle/Orifice Size: 7.0
• Max Flow Rate: 18 GPM
• Min Flow Rate: 1 GPM
• Max Pressure: 5,000 PSI
• Min Pressure: 1,000 PSI
• Max Temp: 194° F.
• Inlet: 3/8” Female
• Outlet: 3/8” Male
• Hose Barb: .35” ID hose
• Weight: 0.71 lb

Please use Nozzle Chart to determine proper nozzle size

Note: If between sizes, choose the larger nozzle size

Nozzle Chart

Suttner ST-160 Stainless Steel Single Chemical Injector w/9 Metering / Dosing Nozzles, #8.0, 5000 PSI, 3/8" F x 3/8” M

Features
• Food grade quality and specifications
• Durable Stainless Steel housing
• 9 Metering / dosing nozzles included (See 2nd picture)
• Uses .35" I.D. Hose

Specifications
• Nozzle/Orifice Size: 8.0
• Max Flow Rate: 18 GPM
• Min Flow Rate: 1 GPM
• Max Pressure: 5,000 PSI
• Min Pressure: 1,000 PSI
• Max Temp: 194° F.
• Inlet: 3/8” Female
• Outlet: 3/8” Male
• Hose Barb: .35” ID hose
• Weight: 0.71 lb

Please use Nozzle Chart to determine proper nozzle size

Note: If between sizes, choose the larger nozzle size

Nozzle Chart

Suttner ST-160 Stainless Steel Single Chemical Injector w/9 Metering / Dosing Nozzles, #8.5, 5000 PSI, 3/8" F x 3/8” M

Features
• Food grade quality and specifications
• Durable Stainless Steel housing
• 9 Metering / dosing nozzles included (See 2nd picture)
• Uses .35" I.D. Hose

Specifications
• Nozzle/Orifice Size: 8.5
• Max Flow Rate: 18 GPM
• Min Flow Rate: 1 GPM
• Max Pressure: 5,000 PSI
• Min Pressure: 1,000 PSI
• Max Temp: 194° F.
• Inlet: 3/8” Female
• Outlet: 3/8” Male
• Hose Barb: .35” ID hose
• Weight: 0.71 lb

Please use Nozzle Chart to determine proper nozzle size

Note: If between sizes, choose the larger nozzle size

Nozzle Chart

Suttner ST-160 Stainless Steel Single Chemical Injector w/9 Metering / Dosing Nozzles, #9.0, 5000 PSI, 3/8" F x 3/8” M

Features
• Food grade quality and specifications
• Durable Stainless Steel housing
• 9 Metering / dosing nozzles included (See 2nd picture)
• Uses .35" I.D. Hose

Specifications
• Nozzle/Orifice Size: 9.0
• Max Flow Rate: 18 GPM
• Min Flow Rate: 1 GPM
• Max Pressure: 5,000 PSI
• Min Pressure: 1,000 PSI
• Max Temp: 194° F.
• Inlet: 3/8” Female
• Outlet: 3/8” Male
• Hose Barb: .35” ID hose
• Weight: 0.71 lb

Please use Nozzle Chart to determine proper nozzle size

Note: If between sizes, choose the larger nozzle size

Nozzle Chart

Suttner #4.5 ST-160.3A Air Assisted Stainless Steel Chemical Injector with 3 Pairs of Injectors & Nozzles. Injector for large water quantities and high dosages. Chemically resistant stainless steel 1.4305 / AISI 304 with compressed air connection and wall bracket

Features
• The stainless steel injector features three pairs of injector and nozzle in one housing which can be configured independently. This enables numerous metering and foam applications
• In order to produce large foam quantities in the low-pressure range, the injector is provided with an compressed air connection
• You can inject 3 of the same or three different cleaning agents at the same time
• Maximum draw rate per line is 7 – 8%
• Total injector draw rate will be 21% – 24%
• Each injector draw barb comes with a packet of dosing nozzles if you want to meter some of or all 3 draw lines

Specifications
• Nozzle/Orifice Size: 4.5
• Flow Rate: 1 - 24 GPM
• Pressure: 90 - 5,000 PSI
• Max Temp: 194° F.
• Inlet: 1/2” Female
• Outlet: 1/2” Female
• Air Connection: 1/4” Male
• Hose Barbs: .35” ID hose
• Note: Optimum foam created 130°F or less
• Weight: 3.55 lb

Please use Nozzle Chart to determine proper nozzle size

Note: If between sizes, choose the larger nozzle size

Nozzle Chart

Suttner #9.0 ST-160.3A Air Assisted Stainless Steel Chemical Injector with 3 Pairs of Injectors & Nozzles. Injector for large water quantities and high dosages. Chemically resistant stainless steel 1.4305 / AISI 304 with compressed air connection and wall bracket

Features
• The stainless steel injector features three pairs of injector and nozzle in one housing which can be configured independently. This enables numerous metering and foam applications
• In order to produce large foam quantities in the low-pressure range, the injector is provided with an compressed air connection
• You can inject 3 of the same or three different cleaning agents at the same time
• Maximum draw rate per line is 7 – 8%
• Total injector draw rate will be 21% – 24%
• Each injector draw barb comes with a packet of dosing nozzles if you want to meter some of or all 3 draw lines

Specifications
• Nozzle/Orifice Size: 9.0
• Flow Rate: 1 - 24 GPM
• Pressure: 90 - 5,000 PSI
• Max Temp: 194° F.
• Inlet: 1/2” Female
• Outlet: 1/2” Female
• Air Connection: 1/4” Male
• Hose Barbs: .35” ID hose
• Note: Optimum foam created 130°F or less
• Weight: 3.55 lb

Please use Nozzle Chart to determine proper nozzle size

Note: If between sizes, choose the larger nozzle size

Nozzle Chart

Suttner #9.0 ST-160.3A Extreme Air Assisted Stainless Steel Chemical Injector with 3 Pairs of Injectors & Nozzles. Injector for large water quantities and high dosages. Chemically resistant stainless steel 1.4305 / AISI 304 with compressed air connection and wall bracket

Features
• Extreme chemical injectors for PH Level 2.0 or below
• The stainless steel injector features three pairs of injector and nozzle in one housing which can be configured independently. This enables numerous metering and foam applications
• In order to produce large foam quantities in the low-pressure range, the injector is provided with an compressed air connection
• You can inject 3 of the same or three different cleaning agents at the same time
• Maximum draw rate per line is 7 – 8%
• Total injector draw rate will be 21% – 24%
• Each injector draw barb comes with a packet of dosing nozzles if you want to meter some of or all 3 draw lines

Specifications
• Nozzle/Orifice Size: 9.0
• Flow Rate: 1 - 24 GPM
• Pressure: 90 - 5,000 PSI
• Max Temp: 194° F.
• Inlet: 1/2” Female
• Outlet: 1/2” Female
• Air Connection: 1/4” Male
• Hose Barbs: .35” ID hose
• Note: Optimum foam created 130°F or less
• Weight: 3.55 lb

Please use Nozzle Chart to determine proper nozzle size

Note: If between sizes, choose the larger nozzle size

Nozzle Chart

Suttner #4.5 ST-160.3A Extreme Air Assisted Stainless Steel Chemical Injector with 3 Pairs of Injectors & Nozzles. Injector for large water quantities and high dosages. Chemically resistant stainless steel 1.4305 / AISI 304 with compressed air connection and wall bracket

Features
• Extreme chemical injectors for PH Level 2.0 or below
• The stainless steel injector features three pairs of injector and nozzle in one housing which can be configured independently. This enables numerous metering and foam applications
• In order to produce large foam quantities in the low-pressure range, the injector is provided with an compressed air connection
• You can inject 3 of the same or three different cleaning agents at the same time
• Maximum draw rate per line is 7 – 8%
• Total injector draw rate will be 21% – 24%
• Each injector draw barb comes with a packet of dosing nozzles if you want to meter some of or all 3 draw lines

Specifications
• Nozzle/Orifice Size: 4.5
• Flow Rate: 1 - 24 GPM
• Pressure: 90 - 5,000 PSI
• Max Temp: 194° F.
• Inlet: 1/2” Female
• Outlet: 1/2” Female
• Air Connection: 1/4” Male
• Hose Barbs: .35” ID hose
• Note: Optimum foam created 130°F or less
• Weight: 3.55 lb

Please use Nozzle Chart to determine proper nozzle size

Note: If between sizes, choose the larger nozzle size

Nozzle Chart

Suttner ST-160M Stainless Steel Single Chemical Injector w/Metering Valve, #10.0, 5000 Psi, 3/8" F x 3/8” M

Features
• Food grade quality and specifications
• Stainless steel construction
• Conserves chemicals
• Locks in position for accurate metering
• Multiple metering positions

Specifications
• Nozzle/Orifice Size: 10.0
• Max Flow Rate: 21 GPM
• Min Flow Rate: 1 GPM
• Max Pressure: 5,000 PSI
• Min Pressure: 1,000 PSI
• Max Temp: 194° F.
• Inlet: 3/8” Female
• Outlet: 3/8” Male
• Hose Barb: .35” ID hose
• Weight: 1.25 lb

Please use Nozzle Chart to determine proper nozzle size

Note: If between sizes, choose the larger nozzle size

Nozzle Chart

See the ST-160M System Diagram below to determine the foam components needed

ST-160M System Diagram

Suttner ST-160M Stainless Steel Single Chemical Injector w/Metering Valve, #11.0, 5000 Psi, 3/8" F x 3/8” M

Features
• Food grade quality and specifications
• Stainless steel construction
• Conserves chemicals
• Locks in position for accurate metering
• Multiple metering positions

Specifications
• Nozzle/Orifice Size: 11.0
• Max Flow Rate: 21 GPM
• Min Flow Rate: 1 GPM
• Max Pressure: 5,000 PSI
• Min Pressure: 1,000 PSI
• Max Temp: 194° F.
• Inlet: 3/8” Female
• Outlet: 3/8” Male
• Hose Barb: .35” ID hose
• Weight: 1.25 lb

Please use Nozzle Chart to determine proper nozzle size

Note: If between sizes, choose the larger nozzle size

Nozzle Chart

See the ST-160M System Diagram below to determine the foam components needed

ST-160M System Diagram

Suttner ST-160M Stainless Steel Single Chemical Injector w/Metering Valve, #12.0, 5000 Psi, 3/8" F x 3/8” M

Features
• Food grade quality and specifications
• Stainless steel construction
• Conserves chemicals
• Locks in position for accurate metering
• Multiple metering positions

Specifications
• Nozzle/Orifice Size: 12.0
• Max Flow Rate: 21 GPM
• Min Flow Rate: 1 GPM
• Max Pressure: 5,000 PSI
• Min Pressure: 1,000 PSI
• Max Temp: 194° F.
• Inlet: 3/8” Female
• Outlet: 3/8” Male
• Hose Barb: .35” ID hose
• Weight: 1.25 lb

Please use Nozzle Chart to determine proper nozzle size

Note: If between sizes, choose the larger nozzle size

Nozzle Chart

See the ST-160M System Diagram below to determine the foam components needed

ST-160M System Diagram

Suttner ST-160M Stainless Steel Single Chemical Injector w/Metering Valve, #12.5, 5000 Psi, 3/8" F x 3/8” M

Features
• Food grade quality and specifications
• Stainless steel construction
• Conserves chemicals
• Locks in position for accurate metering
• Multiple metering positions

Specifications
• Nozzle/Orifice Size: 12.5
• Max Flow Rate: 21 GPM
• Min Flow Rate: 1 GPM
• Max Pressure: 5,000 PSI
• Min Pressure: 1,000 PSI
• Max Temp: 194° F.
• Inlet: 3/8” Female
• Outlet: 3/8” Male
• Hose Barb: .35” ID hose
• Weight: 1.25 lb

Please use Nozzle Chart to determine proper nozzle size

Note: If between sizes, choose the larger nozzle size

Nozzle Chart

See the ST-160M System Diagram below to determine the foam components needed

ST-160M System Diagram

Suttner ST-160M Stainless Steel Single Chemical Injector w/Metering Valve, #3.0, 5000 Psi, 3/8" F x 3/8” M

Features
• Food grade quality and specifications
• Stainless steel construction
• Conserves chemicals
• Locks in position for accurate metering
• Multiple metering positions

Specifications
• Nozzle/Orifice Size: 3.0
• Max Flow Rate: 21 GPM
• Min Flow Rate: 1 GPM
• Max Pressure: 5,000 PSI
• Min Pressure: 1,000 PSI
• Max Temp: 194° F.
• Inlet: 3/8” Female
• Outlet: 3/8” Male
• Hose Barb: .35” ID hose
• Weight: 1.25 lb

Please use Nozzle Chart to determine proper nozzle size

Note: If between sizes, choose the larger nozzle size

Nozzle Chart

See the ST-160M System Diagram below to determine the foam components needed

ST-160M System Diagram

Suttner ST-160M Stainless Steel Single Chemical Injector w/Metering Valve, #3.5, 5000 Psi, 3/8" F x 3/8” M

Features
• Food grade quality and specifications
• Stainless steel construction
• Conserves chemicals
• Locks in position for accurate metering
• Multiple metering positions

Specifications
• Nozzle/Orifice Size: 3.5
• Max Flow Rate: 21 GPM
• Min Flow Rate: 1 GPM
• Max Pressure: 5,000 PSI
• Min Pressure: 1,000 PSI
• Max Temp: 194° F.
• Inlet: 3/8” Female
• Outlet: 3/8” Male
• Hose Barb: .35” ID hose
• Weight: 1.25 lb

Please use Nozzle Chart to determine proper nozzle size

Note: If between sizes, choose the larger nozzle size

Nozzle Chart

See the ST-160M System Diagram below to determine the foam components needed

ST-160M System Diagram

Suttner ST-160M Stainless Steel Single Chemical Injector w/Metering Valve, #4.0, 5000 Psi, 3/8" F x 3/8” M

Features
• Food grade quality and specifications
• Stainless steel construction
• Conserves chemicals
• Locks in position for accurate metering
• Multiple metering positions

Specifications
• Orifice: 4.0
• Max Flow Rate: 21 GPM
• Min Flow Rate: 1 GPM
• Max Pressure: 5,000 PSI
• Min Pressure: 1,000 PSI
• Max Temp: 194° F.
• Inlet: 3/8” Female
• Outlet: 3/8” Male
• Hose Barb: .35” ID hose
• Weight: 1.25 lb

Please use Nozzle Chart to determine proper nozzle size

Note: If between sizes, choose the larger nozzle size

Nozzle Chart

Suttner ST-160M Stainless Steel Single Chemical Injector w/Metering Valve, #4.5, 5000 Psi, 3/8" F x 3/8” M

Features
• Food grade quality and specifications
• Stainless steel construction
• Conserves chemicals
• Locks in position for accurate metering
• Multiple metering positions

Specifications
• Nozzle/Orifice Size: 4.5
• Max Flow Rate: 21 GPM
• Min Flow Rate: 1 GPM
• Max Pressure: 5,000 PSI
• Min Pressure: 1,000 PSI
• Max Temp: 194° F.
• Inlet: 3/8” Female
• Outlet: 3/8” Male
• Hose Barb: .35” ID hose
• Weight: 1.25 lb

Please use Nozzle Chart to determine proper nozzle size

Note: If between sizes, choose the larger nozzle size

Nozzle Chart

See the ST-160M System Diagram below to determine the foam components needed

ST-160M System Diagram

Suttner ST-160M Stainless Steel Single Chemical Injector w/Metering Valve, #5.5, 5000 Psi, 3/8" F x 3/8” M

Features
• Food grade quality and specifications
• Stainless steel construction
• Conserves chemicals
• Locks in position for accurate metering
• Multiple metering positions

Specifications
• Nozzle/Orifice Size: 5.5
• Max Flow Rate: 21 GPM
• Min Flow Rate: 1 GPM
• Max Pressure: 5,000 PSI
• Min Pressure: 1,000 PSI
• Max Temp: 194° F.
• Inlet: 3/8” Female
• Outlet: 3/8” Male
• Hose Barb: .35” ID hose
• Weight: 1.25 lb

Please use Nozzle Chart to determine proper nozzle size

Note: If between sizes, choose the larger nozzle size

Nozzle Chart

See the ST-160M System Diagram below to determine the foam components needed

ST-160M System Diagram

Suttner ST-160M Stainless Steel Single Chemical Injector w/Metering Valve, #6.0, 5000 Psi, 3/8" F x 3/8” M

Features
• Food grade quality and specifications
• Stainless steel construction
• Conserves chemicals
• Locks in position for accurate metering
• Multiple metering positions

Specifications
• Nozzle/Orifice Size: 6.0
• Max Flow Rate: 21 GPM
• Min Flow Rate: 1 GPM
• Max Pressure: 5,000 PSI
• Min Pressure: 1,000 PSI
• Max Temp: 194° F.
• Inlet: 3/8” Female
• Outlet: 3/8” Male
• Hose Barb: .35” ID hose
• Weight: 1.25 lb

Please use Nozzle Chart to determine proper nozzle size

Note: If between sizes, choose the larger nozzle size

Nozzle Chart

See the ST-160M System Diagram below to determine the foam components needed

ST-160M System Diagram

Suttner ST-160M Stainless Steel Single Chemical Injector w/Metering Valve, #7.0, 5000 Psi, 3/8" F x 3/8” M

Features
• Food grade quality and specifications
• Stainless steel construction
• Conserves chemicals
• Locks in position for accurate metering
• Multiple metering positions

Specifications
• Nozzle/Orifice Size: 7.0
• Max Flow Rate: 21 GPM
• Min Flow Rate: 1 GPM
• Max Pressure: 5,000 PSI
• Min Pressure: 1,000 PSI
• Max Temp: 194° F.
• Inlet: 3/8” Female
• Outlet: 3/8” Male
• Hose Barb: .35” ID hose
• Weight: 1.25 lb

Please use Nozzle Chart to determine proper nozzle size

Note: If between sizes, choose the larger nozzle size

Nozzle Chart

See the ST-160M System Diagram below to determine the foam components needed

ST-160M System Diagram

Suttner ST-160M Stainless Steel Single Chemical Injector w/Metering Valve, #8.0, 5000 Psi, 3/8" F x 3/8” M

Features
• Food grade quality and specifications
• Stainless steel construction
• Conserves chemicals
• Locks in position for accurate metering
• Multiple metering positions

Specifications
• Nozzle/Orifice Size: 8.0
• Max Flow Rate: 21 GPM
• Min Flow Rate: 1 GPM
• Max Pressure: 5,000 PSI
• Min Pressure: 1,000 PSI
• Max Temp: 194° F.
• Inlet: 3/8” Female
• Outlet: 3/8” Male
• Hose Barb: .35” ID hose
• Weight: 1.25 lb

Please use Nozzle Chart to determine proper nozzle size

Note: If between sizes, choose the larger nozzle size

Nozzle Chart

See the ST-160M System Diagram below to determine the foam components needed

ST-160M System Diagram

Suttner ST-160M Stainless Steel Single Chemical Injector w/Metering Valve, #8.5, 5000 Psi, 3/8" F x 3/8” M

Features
• Food grade quality and specifications
• Stainless steel construction
• Conserves chemicals
• Locks in position for accurate metering
• Multiple metering positions

Specifications
• Nozzle/Orifice Size: 8.5
• Max Flow Rate: 21 GPM
• Min Flow Rate: 1 GPM
• Max Pressure: 5,000 PSI
• Min Pressure: 1,000 PSI
• Max Temp: 194° F.
• Inlet: 3/8” Female
• Outlet: 3/8” Male
• Hose Barb: .35” ID hose
• Weight: 1.25 lb

Please use Nozzle Chart to determine proper nozzle size

Note: If between sizes, choose the larger nozzle size

Nozzle Chart

See the ST-160M System Diagram below to determine the foam components needed

ST-160M System Diagram

Suttner ST-160M Stainless Steel Single Chemical Injector w/Metering Valve, #9.0, 5000 Psi, 3/8" F x 3/8” M

Features
• Food grade quality and specifications
• Stainless steel construction
• Conserves chemicals
• Locks in position for accurate metering
• Multiple metering positions

Specifications
• Nozzle/Orifice Size: 9.0
• Max Flow Rate: 21 GPM
• Min Flow Rate: 1 GPM
• Max Pressure: 5,000 PSI
• Min Pressure: 1,000 PSI
• Max Temp: 194° F.
• Inlet: 3/8” Female
• Outlet: 3/8” Male
• Hose Barb: .35” ID hose
• Weight: 1.25 lb

Please use Nozzle Chart to determine proper nozzle size

Note: If between sizes, choose the larger nozzle size

Nozzle Chart

See the ST-160M System Diagram below to determine the foam components needed

ST-160M System Diagram

Suttner ST-161 Stainless Steel Metering Valve, 212° F .35" Hose Barb. Eliminate the need for dosing nozzles

Specifications
• Fits Injectors ST-160, ST-160.2, ST-167, ST-168
• Adjustable
• Stainless steel
• Food grade construction
• Weight: 1.75 lb

Suttner ST-164 Compressed Air Check Valve 1/4" Male x: M18

• Inlet: 1/4" Male
• Outlet: M18 Male Includes O-Ring
• Material: Stainless Steel
• Weight: 0.79

Suttner ST-164 Injector Nozzle 1.8mm

• Nozzle Size: 1.8mm
• Material: Stainless Steel
• Weight: 0.10

Suttner ST-164 Stainless Steel Chemical Bypass Injector, #10.0, 5000 Psi, 3/8" F x 1/2” F

Field of Application
• Designed for the cleaning of vehicles carrying cattle, food, frozen foods and fish in order to avoid bacterial spread. Also suitable for cleaning milking parlours and applicable in cattle bredding, piggery, poultry farming and in the pisciculture
• The foam device is a combination made out of stainless steel and special high performance plastics. The addition of one out of two connected chemicals is determined by positioning the lever. All versions are suitable for the addition in low pressure from approx. 43 PSI up to max. 5,076 PSI
• When being operated in rinsing function up to 15.85 GPM pass through the unit without any drop in pressure
• Locks in position for accurate metering
• In combination with a foam lance (ST-72 or ST-75), an adjustable or a triple nozzle the ST-164 injector can suck in chemicals by means of the integrated check valve made out of stainless steel and spray them on or foam them depending on the chosen nozzle
• The ST-164 injector is available in the nozzle size of 3.5 – 11.0
• The dosing is adjusted by one of the 18 nozzle inserts which are included in the consignment. The connection for chemicals is equipped with an integrated check valve

Features
• Integrated lever that allows you to go from disinfectant to foam to rinse
• Food grade quality and specifications
• Durable Stainless steel construction
• 18 Dosing nozzles included
• Use 0.35 ID hose

Specifications
• Nozzle/Orifice Size: 10.0
• Max Flow Rate: 21 GPM
• Min Flow Rate: 1 GPM
• Max Pressure: 5,000 PSI
• Min Pressure: 1,200 PSI
• Max Temp: 212° F.
• Inlet: 3/8” Female
• Outlet: 1/2” Female
• Hose Barbs: .35” ID hose
• Weight: 4.80 lb

Please use Nozzle Chart to determine proper nozzle size

Note: If between sizes, choose the larger nozzle size

Nozzle Chart

See the ST-164 System Diagram below to determine the foam components needed

ST-164 System Diagram

Suttner ST-164 Stainless Steel Chemical Bypass Injector, #11.0, 5000 Psi, 3/8" F x 1/2” F

Field of Application
• Designed for the cleaning of vehicles carrying cattle, food, frozen foods and fish in order to avoid bacterial spread. Also suitable for cleaning milking parlours and applicable in cattle bredding, piggery, poultry farming and in the pisciculture
• The foam device is a combination made out of stainless steel and special high performance plastics. The addition of one out of two connected chemicals is determined by positioning the lever. All versions are suitable for the addition in low pressure from approx. 43 PSI up to max. 5,076 PSI
• When being operated in rinsing function up to 15.85 GPM pass through the unit without any drop in pressure
• Locks in position for accurate metering
• In combination with a foam lance (ST-72 or ST-75), an adjustable or a triple nozzle the ST-164 injector can suck in chemicals by means of the integrated check valve made out of stainless steel and spray them on or foam them depending on the chosen nozzle
• The ST-164 injector is available in the nozzle size of 3.5 – 11.0
• The dosing is adjusted by one of the 18 nozzle inserts which are included in the consignment. The connection for chemicals is equipped with an integrated check valve

Features
• Integrated lever that allows you to go from disinfectant to foam to rinse
• Food grade quality and specifications
• Durable Stainless steel construction
• 18 Dosing nozzles included
• Use 0.35 ID hose

Specifications
• Nozzle/Orifice Size: 11.0
• Max Flow Rate: 21 GPM
• Min Flow Rate: 1 GPM
• Max Pressure: 5,000 PSI
• Min Pressure: 1,200 PSI
• Max Temp: 212° F.
• Inlet: 3/8” Female
• Outlet: 1/2” Female
• Hose Barbs: .35” ID hose
• Weight: 4.80 lb

Please use Nozzle Chart to determine proper nozzle size

Note: If between sizes, choose the larger nozzle size

Nozzle Chart

See the ST-164 System Diagram below to determine the foam components needed

ST-164 System Diagram

Suttner ST-164 Stainless Steel Chemical Bypass Injector, #12.0, 5000 Psi, 3/8" F x 1/2” F

Field of Application
• Designed for the cleaning of vehicles carrying cattle, food, frozen foods and fish in order to avoid bacterial spread. Also suitable for cleaning milking parlours and applicable in cattle bredding, piggery, poultry farming and in the pisciculture
• The foam device is a combination made out of stainless steel and special high performance plastics. The addition of one out of two connected chemicals is determined by positioning the lever. All versions are suitable for the addition in low pressure from approx. 43 PSI up to max. 5,076 PSI
• When being operated in rinsing function up to 15.85 GPM pass through the unit without any drop in pressure
• Locks in position for accurate metering
• In combination with a foam lance (ST-72 or ST-75), an adjustable or a triple nozzle the ST-164 injector can suck in chemicals by means of the integrated check valve made out of stainless steel and spray them on or foam them depending on the chosen nozzle
• The ST-164 injector is available in the nozzle size of 3.5 – 11.0
• The dosing is adjusted by one of the 18 nozzle inserts which are included in the consignment. The connection for chemicals is equipped with an integrated check valve

Features
• Integrated lever that allows you to go from disinfectant to foam to rinse
• Food grade quality and specifications
• Durable Stainless steel construction
• 18 Dosing nozzles included
• Use 0.35 ID hose

Specifications
• Nozzle/Orifice Size: 12.0
• Max Flow Rate: 21 GPM
• Min Flow Rate: 1 GPM
• Max Pressure: 5,000 PSI
• Min Pressure: 1,200 PSI
• Max Temp: 212° F.
• Inlet: 3/8” Female
• Outlet: 1/2” Female
• Hose Barbs: .35” ID hose
• Weight: 4.80 lb

Please use Nozzle Chart to determine proper nozzle size

Note: If between sizes, choose the larger nozzle size

Nozzle Chart

See the ST-164 System Diagram below to determine the foam components needed

ST-164 System Diagram

Suttner ST-164 Stainless Steel Chemical Bypass Injector, #2.4 - 3.2, 5000 Psi, 3/8" F x 1/2” F

Field of Application
• Designed for the cleaning of vehicles carrying cattle, food, frozen foods and fish in order to avoid bacterial spread. Also suitable for cleaning milking parlours and applicable in cattle bredding, piggery, poultry farming and in the pisciculture
• The foam device is a combination made out of stainless steel and special high performance plastics. The addition of one out of two connected chemicals is determined by positioning the lever. All versions are suitable for the addition in low pressure from approx. 43 PSI up to max. 5,076 PSI
• When being operated in rinsing function up to 15.85 GPM pass through the unit without any drop in pressure
• Locks in position for accurate metering
• In combination with a foam lance (ST-72 or ST-75), an adjustable or a triple nozzle the ST-164 injector can suck in chemicals by means of the integrated check valve made out of stainless steel and spray them on or foam them depending on the chosen nozzle
• The ST-164 injector is available in the nozzle size of 3.5 – 11.0
• The dosing is adjusted by one of the 18 nozzle inserts which are included in the consignment. The connection for chemicals is equipped with an integrated check valve

Features
• Integrated lever that allows you to go from disinfectant to foam to rinse
• Food grade quality and specifications
• Durable Stainless steel construction
• 18 Dosing nozzles included
• Use 0.35 ID hose

Specifications
• Nozzle/Orifice Size: 2.4 - 3.2
• Max Flow Rate: 21 GPM
• Min Flow Rate: 1 GPM
• Max Pressure: 5,000 PSI
• Min Pressure: 1,200 PSI
• Max Temp: 212° F.
• Inlet: 3/8” Female
• Outlet: 1/2” Female
• Hose Barbs: .35” ID hose
• Weight: 4.80 lb

Please use Nozzle Chart to determine proper nozzle size

Note: If between sizes, choose the larger nozzle size

Nozzle Chart

See the ST-164 System Diagram below to determine the foam components needed

ST-164 System Diagram

Suttner ST-164 Stainless Steel Chemical Bypass Injector, #3.0, 5000 Psi, 3/8" F x 1/2” F

Field of Application
• Designed for the cleaning of vehicles carrying cattle, food, frozen foods and fish in order to avoid bacterial spread. Also suitable for cleaning milking parlours and applicable in cattle bredding, piggery, poultry farming and in the pisciculture
• The foam device is a combination made out of stainless steel and special high performance plastics. The addition of one out of two connected chemicals is determined by positioning the lever. All versions are suitable for the addition in low pressure from approx. 43 PSI up to max. 5,076 PSI
• When being operated in rinsing function up to 15.85 GPM pass through the unit without any drop in pressure
• Locks in position for accurate metering
• In combination with a foam lance (ST-72 or ST-75), an adjustable or a triple nozzle the ST-164 injector can suck in chemicals by means of the integrated check valve made out of stainless steel and spray them on or foam them depending on the chosen nozzle
• The ST-164 injector is available in the nozzle size of 3.5 – 11.0
• The dosing is adjusted by one of the 18 nozzle inserts which are included in the consignment. The connection for chemicals is equipped with an integrated check valve

Features
• Integrated lever that allows you to go from disinfectant to foam to rinse
• Food grade quality and specifications
• Durable Stainless steel construction
• 18 Dosing nozzles included
• Use 0.35 ID hose

Specifications
• Nozzle/Orifice Size: 3.0
• Max Flow Rate: 21 GPM
• Min Flow Rate: 1 GPM
• Max Pressure: 5,000 PSI
• Min Pressure: 1,200 PSI
• Max Temp: 212° F.
• Inlet: 3/8” Female
• Outlet: 1/2” Female
• Hose Barbs: .35” ID hose
• Weight: 4.80 lb

Please use Nozzle Chart to determine proper nozzle size

Note: If between sizes, choose the larger nozzle size

Nozzle Chart

See the ST-164 System Diagram below to determine the foam components needed

ST-164 System Diagram

Suttner ST-164 Stainless Steel Chemical Bypass Injector, #3.5, 5000 Psi, 3/8" F x 1/2” F

Field of Application
• Designed for the cleaning of vehicles carrying cattle, food, frozen foods and fish in order to avoid bacterial spread. Also suitable for cleaning milking parlours and applicable in cattle bredding, piggery, poultry farming and in the pisciculture
• The foam device is a combination made out of stainless steel and special high performance plastics. The addition of one out of two connected chemicals is determined by positioning the lever. All versions are suitable for the addition in low pressure from approx. 43 PSI up to max. 5,076 PSI
• When being operated in rinsing function up to 15.85 GPM pass through the unit without any drop in pressure
• Locks in position for accurate metering
• In combination with a foam lance (ST-72 or ST-75), an adjustable or a triple nozzle the ST-164 injector can suck in chemicals by means of the integrated check valve made out of stainless steel and spray them on or foam them depending on the chosen nozzle
• The ST-164 injector is available in the nozzle size of 3.5 – 11.0
• The dosing is adjusted by one of the 18 nozzle inserts which are included in the consignment. The connection for chemicals is equipped with an integrated check valve

Features
• Integrated lever that allows you to go from disinfectant to foam to rinse
• Food grade quality and specifications
• Durable Stainless steel construction
• 18 Dosing nozzles included
• Use 0.35 ID hose

Specifications
• Nozzle/Orifice Size: 3.5
• Max Flow Rate: 21 GPM
• Min Flow Rate: 1 GPM
• Max Pressure: 5,000 PSI
• Min Pressure: 1,200 PSI
• Max Temp: 212° F.
• Inlet: 3/8” Female
• Outlet: 1/2” Female
• Hose Barbs: .35” ID hose
• Weight: 4.80 lb

Please use Nozzle Chart to determine proper nozzle size

Note: If between sizes, choose the larger nozzle size

Nozzle Chart

See the ST-164 System Diagram below to determine the foam components needed

ST-164 System Diagram

Suttner ST-164 Stainless Steel Chemical Bypass Injector, #4.0, 5000 Psi, 3/8" F x 1/2” F

Field of Application
• Designed for the cleaning of vehicles carrying cattle, food, frozen foods and fish in order to avoid bacterial spread. Also suitable for cleaning milking parlours and applicable in cattle bredding, piggery, poultry farming and in the pisciculture
• The foam device is a combination made out of stainless steel and special high performance plastics. The addition of one out of two connected chemicals is determined by positioning the lever. All versions are suitable for the addition in low pressure from approx. 43 PSI up to max. 5,076 PSI
• When being operated in rinsing function up to 15.85 GPM pass through the unit without any drop in pressure
• Locks in position for accurate metering
• In combination with a foam lance (ST-72 or ST-75), an adjustable or a triple nozzle the ST-164 injector can suck in chemicals by means of the integrated check valve made out of stainless steel and spray them on or foam them depending on the chosen nozzle
• The ST-164 injector is available in the nozzle size of 3.5 – 11.0
• The dosing is adjusted by one of the 18 nozzle inserts which are included in the consignment. The connection for chemicals is equipped with an integrated check valve

Features
• Integrated lever that allows you to go from disinfectant to foam to rinse
• Food grade quality and specifications
• Durable Stainless steel construction
• 18 Dosing nozzles included
• Use 0.35 ID hose

Specifications
• Nozzle/Orifice Size: 4.0
• Max Flow Rate: 21 GPM
• Min Flow Rate: 1 GPM
• Max Pressure: 5,000 PSI
• Min Pressure: 1,200 PSI
• Max Temp: 212° F.
• Inlet: 3/8” Female
• Outlet: 1/2” Female
• Hose Barbs: .35” ID hose
• Weight: 4.80 lb

Please use Nozzle Chart to determine proper nozzle size

Note: If between sizes, choose the larger nozzle size

Nozzle Chart

See the ST-164 System Diagram below to determine the foam components needed

ST-164 System Diagram

Suttner ST-164 Stainless Steel Chemical Bypass Injector, #4.5, 5000 Psi, 3/8" F x 1/2” F

Field of Application
• Designed for the cleaning of vehicles carrying cattle, food, frozen foods and fish in order to avoid bacterial spread. Also suitable for cleaning milking parlours and applicable in cattle bredding, piggery, poultry farming and in the pisciculture
• The foam device is a combination made out of stainless steel and special high performance plastics. The addition of one out of two connected chemicals is determined by positioning the lever. All versions are suitable for the addition in low pressure from approx. 43 PSI up to max. 5,076 PSI
• When being operated in rinsing function up to 15.85 GPM pass through the unit without any drop in pressure
• Locks in position for accurate metering
• In combination with a foam lance (ST-72 or ST-75), an adjustable or a triple nozzle the ST-164 injector can suck in chemicals by means of the integrated check valve made out of stainless steel and spray them on or foam them depending on the chosen nozzle
• The ST-164 injector is available in the nozzle size of 3.5 – 11.0
• The dosing is adjusted by one of the 18 nozzle inserts which are included in the consignment. The connection for chemicals is equipped with an integrated check valve

Features
• Integrated lever that allows you to go from disinfectant to foam to rinse
• Food grade quality and specifications
• Durable Stainless steel construction
• 18 Dosing nozzles included
• Use 0.35 ID hose

Specifications
• Nozzle/Orifice Size: 5.5
• Max Flow Rate: 21 GPM
• Min Flow Rate: 1 GPM
• Max Pressure: 5,000 PSI
• Min Pressure: 1,200 PSI
• Max Temp: 212° F.
• Inlet: 3/8” Female
• Outlet: 1/2” Female
• Hose Barbs: .35” ID hose
• Weight: 4.80 lb

Please use Nozzle Chart to determine proper nozzle size

Note: If between sizes, choose the larger nozzle size

Nozzle Chart

See the ST-164 System Diagram below to determine the foam components needed

ST-164 System Diagram

Suttner ST-164 Stainless Steel Chemical Bypass Injector, #5.5, 5000 Psi, 3/8" F x 1/2” F

Field of Application
• Designed for the cleaning of vehicles carrying cattle, food, frozen foods and fish in order to avoid bacterial spread. Also suitable for cleaning milking parlours and applicable in cattle bredding, piggery, poultry farming and in the pisciculture
• The foam device is a combination made out of stainless steel and special high performance plastics. The addition of one out of two connected chemicals is determined by positioning the lever. All versions are suitable for the addition in low pressure from approx. 43 PSI up to max. 5,076 PSI
• When being operated in rinsing function up to 15.85 GPM pass through the unit without any drop in pressure
• Locks in position for accurate metering
• In combination with a foam lance (ST-72 or ST-75), an adjustable or a triple nozzle the ST-164 injector can suck in chemicals by means of the integrated check valve made out of stainless steel and spray them on or foam them depending on the chosen nozzle
• The ST-164 injector is available in the nozzle size of 3.5 – 11.0
• The dosing is adjusted by one of the 18 nozzle inserts which are included in the consignment. The connection for chemicals is equipped with an integrated check valve

Features
• Integrated lever that allows you to go from disinfectant to foam to rinse
• Food grade quality and specifications
• Durable Stainless steel construction
• 18 Dosing nozzles included
• Use 0.35 ID hose

Specifications
• Nozzle/Orifice Size: 5.5
• Max Flow Rate: 21 GPM
• Min Flow Rate: 1 GPM
• Max Pressure: 5,000 PSI
• Min Pressure: 1,200 PSI
• Max Temp: 212° F.
• Inlet: 3/8” Female
• Outlet: 1/2” Female
• Hose Barbs: .35” ID hose
• Weight: 4.80 lb

Please use Nozzle Chart to determine proper nozzle size

Note: If between sizes, choose the larger nozzle size

Nozzle Chart

See the ST-164 System Diagram below to determine the foam components needed

ST-164 System Diagram

Suttner ST-164 Stainless Steel Chemical Bypass Injector, #6.0, 5000 Psi, 3/8" F x 1/2” F

Field of Application
• Designed for the cleaning of vehicles carrying cattle, food, frozen foods and fish in order to avoid bacterial spread. Also suitable for cleaning milking parlours and applicable in cattle bredding, piggery, poultry farming and in the pisciculture
• The foam device is a combination made out of stainless steel and special high performance plastics. The addition of one out of two connected chemicals is determined by positioning the lever. All versions are suitable for the addition in low pressure from approx. 43 PSI up to max. 5,076 PSI
• When being operated in rinsing function up to 15.85 GPM pass through the unit without any drop in pressure
• Locks in position for accurate metering
• In combination with a foam lance (ST-72 or ST-75), an adjustable or a triple nozzle the ST-164 injector can suck in chemicals by means of the integrated check valve made out of stainless steel and spray them on or foam them depending on the chosen nozzle
• The ST-164 injector is available in the nozzle size of 3.5 – 11.0
• The dosing is adjusted by one of the 18 nozzle inserts which are included in the consignment. The connection for chemicals is equipped with an integrated check valve

Features
• Integrated lever that allows you to go from disinfectant to foam to rinse
• Food grade quality and specifications
• Durable Stainless steel construction
• 18 Dosing nozzles included
• Use 0.35 ID hose

Specifications
• Nozzle/Orifice Size: 7.0
• Max Flow Rate: 21 GPM
• Min Flow Rate: 1 GPM
• Max Pressure: 5,000 PSI
• Min Pressure: 1,200 PSI
• Max Temp: 212° F.
• Inlet: 3/8” Female
• Outlet: 1/2” Female
• Hose Barbs: .35” ID hose
• Weight: 4.80 lb

Please use Nozzle Chart to determine proper nozzle size

Note: If between sizes, choose the larger nozzle size

Nozzle Chart

See the ST-164 System Diagram below to determine the foam components needed

ST-164 System Diagram

Suttner ST-164 Stainless Steel Chemical Bypass Injector, #7.0, 5000 Psi, 3/8" F x 1/2” F

Field of Application
• Designed for the cleaning of vehicles carrying cattle, food, frozen foods and fish in order to avoid bacterial spread. Also suitable for cleaning milking parlours and applicable in cattle bredding, piggery, poultry farming and in the pisciculture
• The foam device is a combination made out of stainless steel and special high performance plastics. The addition of one out of two connected chemicals is determined by positioning the lever. All versions are suitable for the addition in low pressure from approx. 43 PSI up to max. 5,076 PSI
• When being operated in rinsing function up to 15.85 GPM pass through the unit without any drop in pressure
• Locks in position for accurate metering
• In combination with a foam lance (ST-72 or ST-75), an adjustable or a triple nozzle the ST-164 injector can suck in chemicals by means of the integrated check valve made out of stainless steel and spray them on or foam them depending on the chosen nozzle
• The ST-164 injector is available in the nozzle size of 3.5 – 11.0
• The dosing is adjusted by one of the 18 nozzle inserts which are included in the consignment. The connection for chemicals is equipped with an integrated check valve

Features
• Integrated lever that allows you to go from disinfectant to foam to rinse
• Food grade quality and specifications
• Durable Stainless steel construction
• 18 Dosing nozzles included
• Use 0.35 ID hose

Specifications
• Nozzle/Orifice Size: 7.0
• Max Flow Rate: 21 GPM
• Min Flow Rate: 1 GPM
• Max Pressure: 5,000 PSI
• Min Pressure: 1,200 PSI
• Max Temp: 212° F.
• Inlet: 3/8” Female
• Outlet: 1/2” Female
• Hose Barbs: .35” ID hose
• Weight: 4.80 lb

Please use Nozzle Chart to determine proper nozzle size

Note: If between sizes, choose the larger nozzle size

Nozzle Chart

See the ST-164 System Diagram below to determine the foam components needed

ST-164 System Diagram

Features
• Integrated lever that allows you to go from disinfectant to foam to rinse
• Food grade quality and specifications
• Durable Stainless steel construction
• 18 Dosing nozzles included
• Use 0.35 ID hose

Specifications
• Nozzle/Orifice Size: 8.0
• Max Flow Rate: 21 GPM
• Min Flow Rate: 1 GPM
• Max Pressure: 5,000 PSI
• Min Pressure: 1,200 PSI
• Max Temp: 212° F.
• Inlet: 3/8” Female
• Outlet: 1/2” Female
• Hose Barbs: .35” ID hose
• Weight: 4.80 lb

Please use Nozzle Chart to determine proper nozzle size

Note: If between sizes, choose the larger nozzle size

Nozzle Chart

See the ST-164 System Diagram below to determine the foam components needed

ST-164 System Diagram

Suttner ST-164 Stainless Steel Chemical Bypass Injector, #8.0, 5000 Psi, 3/8" F x 1/2” F

Field of Application
• Designed for the cleaning of vehicles carrying cattle, food, frozen foods and fish in order to avoid bacterial spread. Also suitable for cleaning milking parlours and applicable in cattle bredding, piggery, poultry farming and in the pisciculture
• The foam device is a combination made out of stainless steel and special high performance plastics. The addition of one out of two connected chemicals is determined by positioning the lever. All versions are suitable for the addition in low pressure from approx. 43 PSI up to max. 5,076 PSI
• When being operated in rinsing function up to 15.85 GPM pass through the unit without any drop in pressure
• Locks in position for accurate metering
• In combination with a foam lance (ST-72 or ST-75), an adjustable or a triple nozzle the ST-164 injector can suck in chemicals by means of the integrated check valve made out of stainless steel and spray them on or foam them depending on the chosen nozzle
• The ST-164 injector is available in the nozzle size of 3.5 – 11.0
• The dosing is adjusted by one of the 18 nozzle inserts which are included in the consignment. The connection for chemicals is equipped with an integrated check valve

Features
• Integrated lever that allows you to go from disinfectant to foam to rinse
• Food grade quality and specifications
• Durable Stainless steel construction
• 18 Dosing nozzles included
• Use 0.35 ID hose

Specifications
• Nozzle/Orifice Size: 8.0
• Max Flow Rate: 21 GPM
• Min Flow Rate: 1 GPM
• Max Pressure: 5,000 PSI
• Min Pressure: 1,200 PSI
• Max Temp: 212° F.
• Inlet: 3/8” Female
• Outlet: 1/2” Female
• Hose Barbs: .35” ID hose
• Weight: 4.80 lb

Please use Nozzle Chart to determine proper nozzle size

Note: If between sizes, choose the larger nozzle size

Nozzle Chart

See the ST-164 System Diagram below to determine the foam components needed

ST-164 System Diagram

Suttner ST-164 Stainless Steel Chemical Bypass Injector, #9.0, 5000 Psi, 3/8" F x 1/2” F

Field of Application
• Designed for the cleaning of vehicles carrying cattle, food, frozen foods and fish in order to avoid bacterial spread. Also suitable for cleaning milking parlours and applicable in cattle bredding, piggery, poultry farming and in the pisciculture
• The foam device is a combination made out of stainless steel and special high performance plastics. The addition of one out of two connected chemicals is determined by positioning the lever. All versions are suitable for the addition in low pressure from approx. 43 PSI up to max. 5,076 PSI
• When being operated in rinsing function up to 15.85 GPM pass through the unit without any drop in pressure
• Locks in position for accurate metering
• In combination with a foam lance (ST-72 or ST-75), an adjustable or a triple nozzle the ST-164 injector can suck in chemicals by means of the integrated check valve made out of stainless steel and spray them on or foam them depending on the chosen nozzle
• The ST-164 injector is available in the nozzle size of 3.5 – 11.0
• The dosing is adjusted by one of the 18 nozzle inserts which are included in the consignment. The connection for chemicals is equipped with an integrated check valve

Features
• Integrated lever that allows you to go from disinfectant to foam to rinse
• Food grade quality and specifications
• Durable Stainless steel construction
• 18 Dosing nozzles included
• Use 0.35 ID hose

Specifications
• Nozzle/Orifice Size: 9.0
• Max Flow Rate: 21 GPM
• Min Flow Rate: 1 GPM
• Max Pressure: 5,000 PSI
• Min Pressure: 1,200 PSI
• Max Temp: 212° F.
• Inlet: 3/8” Female
• Outlet: 1/2” Female
• Hose Barbs: .35” ID hose
• Weight: 4.80 lb

Please use Nozzle Chart to determine proper nozzle size

Note: If between sizes, choose the larger nozzle size

Nozzle Chart

See the ST-164 System Diagram below to determine the foam components needed

ST-164 System Diagram

Suttner ST-166 Stainless Steel Dual Chemical Injector w/18 Metering / Dosing Nozzles, #11.0, 5000 PSI, 3/8" F x 3/8” M

Features
• Food grade quality and specifications
• Durable Stainless Steel housing
• 18 Metering / dosing nozzles included (See 3rd picture)
• Uses .35" I.D. Hose

Specifications
• Nozzle/Orifice Size: 11.0
• Max Flow Rate: 18 GPM
• Min Flow Rate: 1 GPM
• Max Pressure: 5,000 PSI
• Min Pressure: 1,000 PSI
• Max Temp: 194° F.
• Inlet: 3/8” Female
• Outlet: 3/8” Male
• Hose Barbs (2): .35” ID hose
• Weight: 0.75 lb

Please use Nozzle Chart to determine proper nozzle size

Note: If between sizes, choose the larger nozzle size

Nozzle Chart

See the ST-166 System Diagram below to determine the foam components needed

ST-166 System Diagram

Suttner ST-166 Stainless Steel Dual Chemical Injector w/18 Metering / Dosing Nozzles, #18.0, 5000 PSI, 3/8" F x 3/8” M

Features
• Food grade quality and specifications
• Durable Stainless Steel housing
• 18 Metering / dosing nozzles included (See 3rd picture)
• Uses .35" I.D. Hose

Specifications
• Nozzle/Orifice Size: 18.0
• Max Flow Rate: 18 GPM
• Min Flow Rate: 1 GPM
• Max Pressure: 5,000 PSI
• Min Pressure: 1,000 PSI
• Max Temp: 194° F.
• Inlet: 3/8” Female
• Outlet: 3/8” Male
• Hose Barbs (2): .35” ID hose
• Weight: 0.75 lb

Please use Nozzle Chart to determine proper nozzle size

Note: If between sizes, choose the larger nozzle size

Nozzle Chart

See the ST-166 System Diagram below to determine the foam components needed

ST-166 System Diagram

Suttner ST-166 Stainless Steel Dual Chemical Injector w/18 Metering / Dosing Nozzles, #4.0, 5000 PSI, 3/8" F x 3/8” M

Features
• Food grade quality and specifications
• Durable Stainless Steel housing
• 18 Metering / dosing nozzles included (See 3rd picture)
• Uses .35" I.D. Hose

Specifications
• Nozzle/Orifice Size: 4.0
• Max Flow Rate: 18 GPM
• Min Flow Rate: 1 GPM
• Max Pressure: 5,000 PSI
• Min Pressure: 1,000 PSI
• Max Temp: 194° F.
• Inlet: 3/8” Female
• Outlet: 3/8” Male
• Hose Barbs (2): .35” ID hose
• Weight: 0.75 lb

Please use Nozzle Chart to determine proper nozzle size

Note: If between sizes, choose the larger nozzle size

Nozzle Chart

See the ST-166 System Diagram below to determine the foam components needed

ST-166 System Diagram

Suttner ST-166 Stainless Steel Dual Chemical Injector w/18 Metering / Dosing Nozzles, #4.5, 5000 PSI, 3/8" F x 3/8” M

Features
• Food grade quality and specifications
• Durable Stainless Steel housing
• 18 Metering / dosing nozzles included (See 3rd picture)
• Uses .35" I.D. Hose

Specifications
• Nozzle/Orifice Size: 4.5
• Max Flow Rate: 18 GPM
• Min Flow Rate: 1 GPM
• Max Pressure: 5,000 PSI
• Min Pressure: 1,000 PSI
• Max Temp: 194° F.
• Inlet: 3/8” Female
• Outlet: 3/8” Male
• Hose Barbs (2): .35” ID hose
• Weight: 0.75 lb

Please use Nozzle Chart to determine proper nozzle size

Note: If between sizes, choose the larger nozzle size

Nozzle Chart

See the ST-166 System Diagram below to determine the foam components needed

ST-166 System Diagram

Suttner ST-166 Stainless Steel Dual Chemical Injector w/18 Metering / Dosing Nozzles, #7.0, 5000 PSI, 3/8" F x 3/8” M

Features
• Food grade quality and specifications
• Durable Stainless Steel housing
• 18 Metering / dosing nozzles included (See 3rd picture)
• Uses .35" I.D. Hose

Specifications
• Nozzle/Orifice Size: 7.0
• Max Flow Rate: 18 GPM
• Min Flow Rate: 1 GPM
• Max Pressure: 5,000 PSI
• Min Pressure: 1,000 PSI
• Max Temp: 194° F.
• Inlet: 3/8” Female
• Outlet: 3/8” Male
• Hose Barbs (2): .35” ID hose
• Weight: 0.75 lb

Please use Nozzle Chart to determine proper nozzle size

Note: If between sizes, choose the larger nozzle size

Nozzle Chart

See the ST-166 System Diagram below to determine the foam components needed

ST-166 System Diagram

Suttner ST-167 Stainless Steel Chemical Bypass Injector, #10.0, 5000 Psi, 3/8" F x 3/8” F

Field of Application
• The injectors completely made out of stainless steel make it possible to open two cross section areas (50 mm2 each) in order to guarantee a smooth use without drop in pressure when washing/rinsing
• This ensures that the injector can be permanently kept in the high pressure line, also at the time when large water quantities are used e.g. in the agriculture or food industry
• The cleaning capacity when cleaning and rinsing is not affected at all.
• A lever makes it possible to change from the cleaning and rinsing mode into injector operation
• When using the cleaning mode, there are two bore holes guiding the high pressure water parallel to the injector (bypass mode)
• When using the injector the available water quantity is guided through the injection area

Features
• Integrated lever that allows you to go from disinfectant to foam to rinse
• Food grade quality and specifications
• Durable Stainless steel construction
• 10 Dosing nozzles included
• Use 0.35 ID hose

Specifications
• Nozzle/Orifice Size: 10.0
• Max Flow Rate:18 GPM
• Min Flow Rate: 1 GPM
• Max Pressure: 5,000 PSI
• Min Pressure: 1,000 PSI
• Max Temp: 212° F.( Optimum foam created 130°F or less)
• Inlet: 3/8” Female
• Outlet: 3/8” Female
• Hose Barbs: .35” ID hose
• See the ST-167 System Diagram (3rd Picture)
• Weight: 2.38 lb

Please use Nozzle Chart to determine proper nozzle size

Note: If between sizes, choose the larger nozzle size

Nozzle Chart

Suttner ST-167 Stainless Steel Chemical Bypass Injector, #12.0, 5000 Psi, 3/8" F x 3/8” F

Field of Application
• The injectors completely made out of stainless steel make it possible to open two cross section areas (50 mm2 each) in order to guarantee a smooth use without drop in pressure when washing/rinsing
• This ensures that the injector can be permanently kept in the high pressure line, also at the time when large water quantities are used e.g. in the agriculture or food industry
• The cleaning capacity when cleaning and rinsing is not affected at all.
• A lever makes it possible to change from the cleaning and rinsing mode into injector operation
• When using the cleaning mode, there are two bore holes guiding the high pressure water parallel to the injector (bypass mode)
• When using the injector the available water quantity is guided through the injection area

Features
• Integrated lever that allows you to go from disinfectant to foam to rinse
• Food grade quality and specifications
• Durable Stainless steel construction
• 10 Dosing nozzles included
• Use 0.35 ID hose

Specifications
• Nozzle/Orifice Size: 12.0
• Max Flow Rate:18 GPM
• Min Flow Rate: 1 GPM
• Max Pressure: 5,000 PSI
• Min Pressure: 1,000 PSI
• Max Temp: 212° F.( Optimum foam created 130°F or less)
• Inlet: 3/8” Female
• Outlet: 3/8” Female
• Hose Barbs: .35” ID hose
• See the ST-167 System Diagram (3rd Picture)
• Weight: 2.38 lb

Please use Nozzle Chart to determine proper nozzle size

Note: If between sizes, choose the larger nozzle size

Nozzle Chart

Suttner ST-167 Stainless Steel Chemical Bypass Injector, #3.0, 5000 Psi, 3/8" F x 3/8” F

Field of Application
• The injectors completely made out of stainless steel make it possible to open two cross section areas (50 mm2 each) in order to guarantee a smooth use without drop in pressure when washing/rinsing
• This ensures that the injector can be permanently kept in the high pressure line, also at the time when large water quantities are used e.g. in the agriculture or food industry
• The cleaning capacity when cleaning and rinsing is not affected at all.
• A lever makes it possible to change from the cleaning and rinsing mode into injector operation
• When using the cleaning mode, there are two bore holes guiding the high pressure water parallel to the injector (bypass mode)
• When using the injector the available water quantity is guided through the injection area

Features
• Integrated lever that allows you to go from disinfectant to foam to rinse
• Food grade quality and specifications
• Durable Stainless steel construction
• 10 Dosing nozzles included
• Use 0.35 ID hose

Specifications
• Nozzle/Orifice Size: 3.0
• Max Flow Rate:18 GPM
• Min Flow Rate: 1 GPM
• Max Pressure: 5,000 PSI
• Min Pressure: 1,000 PSI
• Max Temp: 212° F.( Optimum foam created 130°F or less)
• Inlet: 3/8” Female
• Outlet: 3/8” Female
• Hose Barbs: .35” ID hose
• See the ST-167 System Diagram (3rd Picture)
• Weight: 2.38 lb

Please use Nozzle Chart to determine proper nozzle size

Note: If between sizes, choose the larger nozzle size

Nozzle Chart

Suttner ST-167 Stainless Steel Chemical Bypass Injector, #5.5, 5000 Psi, 3/8" F x 3/8” F

Field of Application
• The injectors completely made out of stainless steel make it possible to open two cross section areas (50 mm2 each) in order to guarantee a smooth use without drop in pressure when washing/rinsing
• This ensures that the injector can be permanently kept in the high pressure line, also at the time when large water quantities are used e.g. in the agriculture or food industry
• The cleaning capacity when cleaning and rinsing is not affected at all.
• A lever makes it possible to change from the cleaning and rinsing mode into injector operation
• When using the cleaning mode, there are two bore holes guiding the high pressure water parallel to the injector (bypass mode)
• When using the injector the available water quantity is guided through the injection area

Features
• Integrated lever that allows you to go from disinfectant to foam to rinse
• Food grade quality and specifications
• Durable Stainless steel construction
• 10 Dosing nozzles included
• Use 0.35 ID hose

Specifications
• Nozzle/Orifice Size: 5.5
• Max Flow Rate:18 GPM
• Min Flow Rate: 1 GPM
• Max Pressure: 5,000 PSI
• Min Pressure: 1,000 PSI
• Max Temp: 212° F.( Optimum foam created 130°F or less)
• Inlet: 3/8” Female
• Outlet: 3/8” Female
• Hose Barbs: .35” ID hose
• See the ST-167 System Diagram (3rd Picture)
• Weight: 2.38 lb

Please use Nozzle Chart to determine proper nozzle size

Note: If between sizes, choose the larger nozzle size

Nozzle Chart

Suttner ST-167 Stainless Steel Chemical Bypass Injector, #6.0, 5000 Psi, 3/8" F x 3/8” F

Field of Application
• The injectors completely made out of stainless steel make it possible to open two cross section areas (50 mm2 each) in order to guarantee a smooth use without drop in pressure when washing/rinsing
• This ensures that the injector can be permanently kept in the high pressure line, also at the time when large water quantities are used e.g. in the agriculture or food industry
• The cleaning capacity when cleaning and rinsing is not affected at all.
• A lever makes it possible to change from the cleaning and rinsing mode into injector operation
• When using the cleaning mode, there are two bore holes guiding the high pressure water parallel to the injector (bypass mode)
• When using the injector the available water quantity is guided through the injection area

Features
• Integrated lever that allows you to go from disinfectant to foam to rinse
• Food grade quality and specifications
• Durable Stainless steel construction
• 10 Dosing nozzles included
• Use 0.35 ID hose

Specifications
• Nozzle/Orifice Size: 6.0
• Max Flow Rate:18 GPM
• Min Flow Rate: 1 GPM
• Max Pressure: 5,000 PSI
• Min Pressure: 1,000 PSI
• Max Temp: 212° F.( Optimum foam created 130°F or less)
• Inlet: 3/8” Female
• Outlet: 3/8” Female
• Hose Barbs: .35” ID hose
• See the ST-167 System Diagram (3rd Picture)
• Weight: 2.38 lb

Please use Nozzle Chart to determine proper nozzle size

Note: If between sizes, choose the larger nozzle size

Nozzle Chart

Suttner ST-167 Stainless Steel Chemical Bypass Injector, #8.0, 5000 Psi, 3/8" F x 3/8” F

Field of Application
• The injectors completely made out of stainless steel make it possible to open two cross section areas (50 mm2 each) in order to guarantee a smooth use without drop in pressure when washing/rinsing
• This ensures that the injector can be permanently kept in the high pressure line, also at the time when large water quantities are used e.g. in the agriculture or food industry
• The cleaning capacity when cleaning and rinsing is not affected at all.
• A lever makes it possible to change from the cleaning and rinsing mode into injector operation
• When using the cleaning mode, there are two bore holes guiding the high pressure water parallel to the injector (bypass mode)
• When using the injector the available water quantity is guided through the injection area

Features
• Integrated lever that allows you to go from disinfectant to foam to rinse
• Food grade quality and specifications
• Durable Stainless steel construction
• 10 Dosing nozzles included
• Use 0.35 ID hose

Specifications
• Nozzle/Orifice Size: 8.0
• Max Flow Rate:18 GPM
• Min Flow Rate: 1 GPM
• Max Pressure: 5,000 PSI
• Min Pressure: 1,000 PSI
• Max Temp: 212° F.( Optimum foam created 130°F or less)
• Inlet: 3/8” Female
• Outlet: 3/8” Female
• Hose Barbs: .35” ID hose
• See the ST-167 System Diagram (3rd Picture)
• Weight: 2.38 lb

Please use Nozzle Chart to determine proper nozzle size

Note: If between sizes, choose the larger nozzle size

Nozzle Chart

Suttner ST-1700 5,000 PSI 10.5 GPM LFT. Ergonomic Design Ideal for Smaller Hands Spray Gun

Features
• High Quality, Made In Germany
• Comfortable grip and reduces fatigue for longer working hours
• This unique design reduces wear to a minimum on the internal components
• Great choice for hot and cold pressure washer use
• Perfect gun for smaller hand operators
• Same inlet & outlet angles as our ST-1500 & ST-2000 spray guns
• LFT (Low Friction Trigger) this gun’s trigger system incorporates a ball between the trigger and piston rod contact area that rolls when triggered resulting in a much easier opening and holding
• 30% less vibration transfer than standard trigger guns when being used with turbo nozzles, telescopic lanes, sand blasters, etc
• Requires about 13% less squeeze force than a standard trigger gun to open and hold the trigger. In addition, it has less force while spraying due to the optimum hand position

Specifications
• Max Pressure: 5,000 PSI
• Max Flow: 10.4 GPM
• Max Temp: 300° F.
• Inlet: 3/8" Female NPT
• Outlet: 1/4" Female NPT
• Weight: 1.05 lb

Suttner ST-175 Stainless Steel 24” Foam & Rinse Lance 5,000 PSI with 1/4" F Inlet. Switch from foam to rinse by turning the valve that’s conveniently within hands reach

Features
• The change-over lance ST-175 Foam & Clean is the ideal accessory for Suttner's foam injector line. The innovative change-over technology allows to direct the full flow into either one or the other outlet pipe just by turning the hand wheel at the inlet
• In one position of the hand wheel the flow is directed thru an ST-75 foam head for foaming. After changing over the full flow is directed thru the other pipe and a regular spray nozzle for rinsing
• Appropriate nozzle sizing at chemical injector and ST-175 allows changing from foaming to rinsing right at the lance. ST -175 Foam & Clean is compatible to ST-160 / ST-160M / ST-164 / ST-166 / ST-167
• Due to ST-175's changeable air injector nozzles the lance can be driven with all pressure washers with flow rates from 1 to 6 GPM. Nozzles with integrated jet former are required

ST-175 Foam & Rinse Lance on YouTube

Specifications
• Flow Rate: 1.0 – 6.0 GPM
• Max Pressure: 5,000 PSI
• Length: 24.0”
• Max Temp: 140° F.
• Inlet: 1/4" Female NPT
• Outlet (Foam): ST-75 Foam head (Air Injector Nozzle not included)
• Outlet (Rinse): 1/4" FPT with nozzle protector (1/4” MPT high pressure nozzle not included)
• Note: Suttner ST-160, ST-160M or St-164 Chemical or Foam injector, air injector nozzle and 1/4" MPT nozzle required and are not included
• Weight: 2.70 lb

Please use Nozzle Chart to determine proper spray nozzle size

Nozzle Chart

Use Spray Nozzle Size and Foam Nozzle Chart to determine correct Air Injector Nozzle to use

Foam Nozzle Chart

Suttner ST-175 Stainless Steel 36” Foam & Rinse Lance 5,000 PSI with 1/4" F Inlet. Switch from foam to rinse by turning the valve that’s conveniently within hands reach

Features
• The change-over lance ST-175 Foam & Clean is the ideal accessory for Suttner's foam injector line. The innovative change-over technology allows to direct the full flow into either one or the other outlet pipe just by turning the hand wheel at the inlet
• In one position of the hand wheel the flow is directed thru an ST-75 foam head for foaming. After changing over the full flow is directed thru the other pipe and a regular spray nozzle for rinsing
• Appropriate nozzle sizing at chemical injector and ST-175 allows changing from foaming to rinsing right at the lance. ST -175 Foam & Clean is compatible to ST-160 / ST-160M / ST-164 / ST-166 / ST-167
• Due to ST-175's changeable air injector nozzles the lance can be driven with all pressure washers with flow rates from 1 to 6 GPM. Nozzles with integrated jet former are required

ST-175 Foam & Rinse Lance on YouTube

Specifications
• Flow Rate: 1.0 – 6.0 GPM
• Max Pressure: 5,000 PSI
• Length: 36.0”
• Max Temp: 140° F.
• Inlet: 1/4" Female NPT
• Outlet (Foam): ST-75 Foam head (Air Injector Nozzle not included)
• Outlet (Rinse): 1/4" FPT with nozzle protector (1/4” MPT high pressure nozzle not included)
• Note: Suttner (ST-160, ST-160M or St-164 Chemical or Foam injector), air injector nozzle and 1/4" MPT nozzle required and are not included
• Weight: 3.65 lb

Please use Nozzle Chart to determine proper spray nozzle size

Nozzle Chart

Use Spray Nozzle Size and Foam Nozzle Chart to determine correct Air Injector Nozzle to use

Foam Nozzle Chart

Suttner ST-2 12" Lance Insulator. Insulates a bare lance and conforms to the curvature of the hand allowing for longer working hours

Features:
• Easily adjusts anywhere on lance for anyone's desired ergonomic position
• Durable hardened plastic

Specifications
• Fits St-001 and ST-003 lances
• Length: 12.75”
• Max Temp: 300°
• Material: Durable hardened plastic
• Weight: 0.50 lb

Suttner ST-2000 Extreme Duty Spray Gun with Low Friction Trigger 5,000 PSI. This spray gun is our MOST popular industrial production gun. It is designed for heavy-duty durability and strongest made gun in it’s class takes the abuse.

Features
• High Quality, Made In Germany
• Strong and durable “Big Hands” handle design
• New 2 piece housing design
• Stainless steel spring, needle, ball and seat
• Forged brass housing for maximum strength
• Unitized valve for easy repair
• LFT (Low Friction Trigger) this gun’s trigger system incorporates a ball between the trigger and piston rod contact area that rolls when triggered resulting in a much easier opening and holding

Specifications
• Max Pressure: 5,000 PSI
• Max Flow: 10.4 GPM
• Max Temp: 300° F.
• Inlet: 3/8" Female NPT
• Outlet: 1/4" Female NPT
• Weight: 1.64 lb

Features
• High Quality, German engineered components
• Ergonomic design
• Unitized valve for easy repair
• LFT "Low Friction Trigger, reduces pulling force
• Same inlet and outlet angles as the ST-1500 & ST-2000 Spray Guns

Specifications
• Max Pressure: 5,000 PSI
• Max Flow: 10 GPM
• Max Temp: 302° F.
• Inlet: 3/8" Female NPT
• Outlet: 1/4" Female NPT
• Weight: 1.25 lb

Suttner ST-23 Turbo Foam Brush with # 10 Orifice. Foam like your at a car wash, brush bristles made from Chinese Highland Hogs, soft for delicate surfaces

Features
• Brush bristles are made from Chinese Highland Hogs for soft delicate surfaces
• Reduces chemical intake without changing foam quality
• Lasts longer and doesn't lose its shape

See ST-23 Turbo Foam Brush in action on YouTube

Specifications
• Orifice Size: 10.0
• Max Flow: 6.0 GPM
• Max Pressure: 2,200 PSI
• Max Temp: 122° F.
• Inlet: 1/4" FPT
• Weight: 1.35 lb

Suttner ST-23 Turbo Foam Brush with # 13 Orifice. Foam like your at a car wash, brush bristles made from Chinese Highland Hogs, soft for delicate surfaces

Features
• Brush bristles are made from Chinese Highland Hogs for soft delicate surfaces
• Reduces chemical intake without changing foam quality
• Lasts longer and doesn't lose its shape

See ST-23 Turbo Foam Brush in action on YouTube

Specifications
• Orifice Size: 13.0
• Max Flow: 6.0 GPM
• Max Pressure: 2,200 PSI
• Max Temp: 122° F.
• Inlet: 1/4" FPT
• Weight: 1.35 lb

Suttner ST-23 Turbo Foam Brush with # 4.0 Orifice. Foam like your at a car wash, brush bristles made from Chinese Highland Hogs, soft for delicate surfaces

Features
• Brush bristles are made from Chinese Highland Hogs for soft delicate surfaces
• Reduces chemical intake without changing foam quality
• Lasts longer and doesn't lose its shape

See ST-23 Turbo Foam Brush in action on YouTube

Specifications
• Orifice Size: 4.0
• Max Flow: 6.0 GPM
• Max Pressure: 2,200 PSI
• Max Temp: 122° F.
• Inlet: 1/4" FPT
• Weight: 1.35 lb

Suttner ST-23 Turbo Foam Brush with # 8.0 Orifice. Foam like your at a car wash, brush bristles made from Chinese Highland Hogs, soft for delicate surfaces

Features
• Brush bristles are made from Chinese Highland Hogs for soft delicate surfaces
• Reduces chemical intake without changing foam quality
• Lasts longer and doesn't lose its shape

See ST-23 Turbo Foam Brush in action on YouTube

Specifications
• Orifice Size: 8.0
• Max Flow: 6.0 GPM
• Max Pressure: 2,200 PSI
• Max Temp: 122° F.
• Inlet: 1/4" FPT
• Weight: 1.35 lb

Suttner ST-230 Safety Relief Valve 1,500 PSI. Ideal in-line regulator for multi-gun pumping units on se!f-serve car wash systems. Perfect for pressure washer/steam combination applications and carpet cleaning industry

Features:
• Adjustable pressure
• Forged brass housing, stainless steel ball and valve seat
• Special seals for maximum heat and chemical resistance
• Valve member rides on elastomeric cushion, eliminating metal to metal contact, a common cause of regulator failure
• Quickly re-buildable with repair kit. Can be rebuilt without removing from the installation

Specifications:
• Pressure: 145 - 1,500 PSI
• Flow Rate: 8 GPM
• O-Ring: EPDM
• Max Temperature: 200° F
• Inlet: 1/4" FNPT
• Outlet: 1/4” FNPT
• Weight: 0.84 lbs

Suttner ST-230 Safety Relief Valve 3,600 PSI New Design with Tamper Proof Cap. Ideal in-line regulator for multi-gun pumping units on se!f-serve car wash systems. Perfect for pressure washer/steam combination applications and carpet cleaning industry

Features:
• Newly designed - Small holes in the cap and body so a tamper proof wire can be put through them like shown in the 3rd photo
• Adjustable pressure
• Forged brass housing, stainless steel ball and valve seat
• Special seals for maximum heat and chemical resistance
• Valve member rides on elastomeric cushion, eliminating metal to metal contact, a common cause of regulator failure
• Quickly re-buildable with repair kit. Can be rebuilt without removing from the installation

Specifications:
• Pressure: 500 - 3,500 PSI
• Flow Rate: 8 GPM
• O-Ring: EPDM
• Max Temperature: 200° F
• Inlet: 1/4" FNPT
• Outlet: 1/4” FNPT
• Note: Tamper proof wire and seal are not included
• Weight: 1.10 lbs

Suttner ST-230 Safety Relief Valve 5,070 PSI (New Style). Ideal in-line regulator for multi-gun pumping units on se!f-serve car wash systems. Perfect forpressure washer/steam combination applications

Features:
• Adjustable pressure
• Forged brass housing, stainless steel ball and valve seat
• Special seals for maximum heat and chemical resistance
• Valve member rides on elastomeric cushion, eliminating metal to metal contact, a common cause of regulator failure
• Quickly re-buildable with repair kit. Can be rebuilt without removing from the installation

Specifications:
• Pressure: 500 - 5,070 PSI
• Flow Rate: 8 GPM
• O-Ring: EPDM
• Max Temperature: 200° F
• Inlet: 1/4" FNPT
• Outlet: 1/4” FNPT
• Replaces 200230600
• Weight: 0.84 lbs

Features
• High Quality, German engineered components
• Easy-Pull™ is designed for operators and applications with high-volume of trigger cycling
• The Easy-Pull™, German Engineered Technology reduces trigger pulling force by 60% compared to usual competitors spray gun
• Easiest opening and holding trigger, requires nearly half the effort of the other rear-entry guns
• Proper spray angle for optimal positioning of pressure points
• Unitized valve for easy repair
• Forged brass housing for maximum strength

Specifications
• Max Pressure: 5,000 PSI
• Max Flow: 12.0 GPM
• Max Temp: 300° F.
• Inlet: 3/8" Female NPT
• Outlet: 1/4" Female NPT
• Weight: 1.22 lb

Features
• High Quality, German engineered components
• Easy-Pull™ is designed for operators and applications with high-volume of trigger cycling
• The Easy-Pull™, German Engineered Technology reduces trigger pulling force by 60% compared to usual competitors spray gun
• Easiest opening and holding trigger, requires nearly half the effort of the other rear-entry guns
• Proper spray angle for optimal positioning of pressure points
• Unitized valve for easy repair
• Forged brass housing for maximum strength

Specifications
• Max Pressure: 5,000 PSI
• Max Flow: 12.0 GPM
• Max Temp: 300° F.
• Color: Orange
• Inlet: 3/8" Female NPT
• Outlet: 1/4" Female NPT
• Weight: 1.22 lb

Suttner ST-2305 Easy-Pull Spray Gun 5,000 PSI with KEW Coupler. Ideal for quick connecting different lances and accessories. Comfort technology designed "easy pull trigger" and comfort grip provide ease when working long hours

Features
• Swivel inlet for hose positioning
• Proper spray angle for optimal positioning of pressure points
• Forged brass housing for maximum strength
• The Easy-Pull trigger is designed for operators and applications with high-volume of trigger cycling
• The Easy-Pull trigger, German Engineered Technology reduces trigger pulling force by 60% compared to usual competitors spray gun

Specifications
• Max Pressure: 5,000 PSI
• Max Flow: 12.0 GPM
• Max Temp: 300° F.
• Inlet: 3/8" FPT
• Outlet: 1/4" FPT
• Weight: 1.73 lb

Features
• High Quality, German engineered components
• Ceramic ball in valve is highly resistant against nearly all soaps and acids
• Easy-Pull™ is designed for operators and applications with high-volume of trigger cycling
• The Easy-Pull™, German Engineered Technology reduces trigger pulling force by 60% compared to usual competitors spray gun
• Easiest opening and holding trigger, requires nearly half the effort of the other rear-entry guns
• Proper spray angle for optimal positioning of pressure points
• Forged brass housing for maximum strength

Specifications
• Max Pressure: 5,000 PSI
• Max Flow: 12.0 GPM
• Max Temp: 300° F.
• Inlet: 3/8" Female NPT
• Outlet: 1/4" Female NPT
• Weight: 1.30 lb

Suttner ST-2320 Trigger Gun 2,170 PSI 21 GPM 1/2" SS Swivel Inlet 1/2" SS Outlet. The sturdy low- and medium-pressure gun made of plastics intended to come into contact with food and fitted with a high-quality brass/stainless steel valve

Features
• The rounded design of gun and handle prevent quick soiling and facilitate maintenance
• Comfortable ergonomic hand grip design
• Easy-Pull is designed for operators and applications with high-volume of trigger cycling
• The ST-2320 guns can be used everywhere: Industry, automotive, street cleaning, and towns
• Made of plastics intended to come into contact with food according to the Directive 1935/2004/EC
• Especially suitable for the food industry
• Ideal for soft wash systems
• Valve piston made of stainless steel
• High-quality design with EPDM seal and PEEK valve piston

ST-2320 Data Sheet

Specifications
• Inlet (Stainless Steel): 1/2” FPT Swiveling by 360°
• Outlet (Stainless Steel): 1/2” FPT
• Maximum Pressure: 2,170 PSI
• Max. Flow Rate: 21 GPM
• Max. Temp.: 300º F.
• Optional: Adjustable nozzle ST-51.1 # 200051750
• Weight: 1.75 lb

Features
• High Quality, German engineered components
• The Relax-Action™, German Engineered Technology reduces trigger pulling force by 40% and holding force up to 90% compared to usual competitors spray gun
• Relax-Action™ is designed for operators and applications with longer periods of cleaning time
• Easiest opening and holding trigger in its class
• Proper spray angle for optimal positioning of pressure points
• Unitized valve for easy repair
• Forged brass housing for maximum strength

Specifications
• Max Pressure: 5,000 PSI
• Max Flow: 12.0 GPM
• Max Temp: 300° F.
• Inlet: 3/8" Female NPT
• Outlet: 1/4" Female NPT
• Weight: 1.28 lb

Suttner ST-2605F Relax-Action Foam Spray Gun 12 GPM and 5,000 PSI

Features
• Suttner exclusive relax-action trigger
• Easiest opening and holding trigger in it’s class
• Proper spray angle for optimal positioning of pressure points
• Orange trigger lock identifies foam spray gun
• Comfort design trigger system

Specifications
• Max Flow: 12.0 GPM
• Max Pressure: 5,000 PSI
• Max Temp: 100° F.
• Inlet: 3/8" FPT
• Outlet: 1/4" FPT
• Weight: 1.28 lb

Features:
• Adjustable valve allows limit setting on both maximum pressure and minimum pressure
• Straight flow-through design minimizes pressure loss through valve
• Working components constructed of high-grade stainless steel. PTFE and Viton seals for maximum heat and chemical resistance
• Internal bypass valve can be easily accessed and repaired without removing unloader from unit

Specifications:
• Maximum Pressure: 3,625 PSI
• Minimum Pressure: 500 PSI
• Flow Rate: 8 GPM
• Max Temperature: 176° F
• Inlet Port: 3/8" FNPT
• Outlet Port: 3/8” FNPT
• Bypass Port: 1/4” FNPT
• Weight: 1.34 lbs

Features:
• Adjustable valve allows limit setting on both maximum pressure and minimum pressure
• Straight flow-through design minimizes pressure loss through valve
• Working components constructed of high-grade stainless steel. PTFE and Viton seals for maximum heat and chemical resistance
• Internal bypass valve can be easily accessed and repaired without removing unloader from unit

Specifications:
• Maximum Pressure: 1,000 PSI
• Minimum Pressure: 200 PSI
• Flow Rate: 8 GPM
• Max Temperature: 176° F
• Inlet Port: 3/8" FNPT
• Outlet Port: 3/8” FNPT
• Bypass Port: 1/4” FNPT
• Weight: 1.34 lbs

Features:
• Built-in exclusive down stream (venturi-type) injector with built in orifice provides more precise siphon rate.
• Adjustable valve allows limit setting on both maximum pressure and minimum pressure
• Straight flow-through design minimizes pressure loss through valve
• Working components constructed of high-grade stainless steel. PTFE and Viton seals for maximum heat and chemical resistance
• Internal bypass valve can be easily accessed and repaired without removing unloader from unit

Specifications:
• Maximum Pressure: 3,625 PSI
• Minimum Pressure: 500 PSI
• Flow Rate: 8 GPM
• Orifice: 1.8 mm
• Injector Flow Rate: 1.5 - 2.25 GPM
• Max Temperature: 176° F
• Inlet Port: 3/8" FNPT
• Outlet Port: 3/8” FNPT
• Bypass Port: 1/4” FNPT
• Weight: 1.38 lbs

Features:
• Built-in exclusive down stream (venturi-type) injector with built in orifice provides more precise siphon rate.
• Adjustable valve allows limit setting on both maximum pressure and minimum pressure
• Straight flow-through design minimizes pressure loss through valve
• Working components constructed of high-grade stainless steel. PTFE and Viton seals for maximum heat and chemical resistance
• Internal bypass valve can be easily accessed and repaired without removing unloader from unit

Specifications:
• Maximum Pressure: 3,625 PSI
• Minimum Pressure: 500 PSI
• Flow Rate: 8 GPM
• Orifice: 2.1 mm
• Injector Flow Rate: 2.25 – 3.35 GPM
• Max Temperature: 176° F
• Inlet Port: 3/8" FNPT
• Outlet Port: 3/8” FNPT
• Bypass Port: 1/4” FNPT
• Weight: 1.38 lbs

Features:
• Built-in exclusive down stream (venturi-type) injector with built in orifice provides more precise siphon rate.
• Adjustable valve allows limit setting on both maximum pressure and minimum pressure
• Straight flow-through design minimizes pressure loss through valve
• Working components constructed of high-grade stainless steel. PTFE and Viton seals for maximum heat and chemical resistance
• Internal bypass valve can be easily accessed and repaired without removing unloader from unit

Specifications:
• Maximum Pressure: 3,625 PSI
• Minimum Pressure: 500 PSI
• Flow Rate: 8 GPM
• Orifice: 2.4 mm
• Injector Flow Rate: 3.35 – 5.0 GPM
• Max Temperature: 176° F
• Inlet Port: 3/8" FNPT
• Outlet Port: 3/8” FNPT
• Bypass Port: 1/4” FNPT
• Weight: 1.38 lbs

Features:
• Adjustable valve allows limit setting on both maximum pressure and minimum pressure
• Straight flow-through design minimizes pressure loss through valve
• Working components constructed of high-grade stainless steel. PTFE and Viton seals for maximum heat and chemical resistance
• Internal bypass valve can be easily accessed and repaired without removing unloader from unit

Specifications:
• Maximum Pressure: 3,625 PSI
• Minimum Pressure: 500 PSI
• Flow Rate: 8 GPM
• Normally closed bypass
• Amps: 125 VAC 5A, 240 VAC 3A
• Max Temperature: 176° F
• Inlet Port: 3/8" FNPT
• Outlet Port: 3/8” FNPT
• Bypass Port: 1/4” FNPT
• Weight: 1.86 lbs

Features:
• Built-in exclusive down stream (venturi-type) injector with built in orifice provides more precise siphon rate
• Adjustable valve allows limit setting on both maximum pressure and minimum pressure
• Straight flow-through design minimizes pressure loss through valve
• Working components constructed of high-grade stainless steel. PTFE and Viton seals for maximum heat and chemical resistance
• Internal bypass valve can be easily accessed and repaired without removing unloader from unit

Specifications:
• Maximum Pressure: 3,625 PSI
• Minimum Pressure: 500 PSI
• Flow Rate: 8 GPM
• Orifice: 1.8 mm
• Injector Flow Rate: 1.5 - 2.25 GPM
• Normally closed bypass
• Amps: 125 VAC 5A, 240 VAC 3A
• Max Temperature: 176° F
• Inlet Port: 3/8" FNPT
• Outlet Port: 3/8” FNPT
• Bypass Port: 1/4” FNPT
• Weight: 1.86 lbs

Features:
• Built-in exclusive down stream (venturi-type) injector with built in orifice provides more precise siphon rate
• Adjustable valve allows limit setting on both maximum pressure and minimum pressure
• Straight flow-through design minimizes pressure loss through valve
• Working components constructed of high-grade stainless steel. PTFE and Viton seals for maximum heat and chemical resistance
• Internal bypass valve can be easily accessed and repaired without removing unloader from unit

Specifications:
• Maximum Pressure: 3,625 PSI
• Minimum Pressure: 500 PSI
• Flow Rate: 8 GPM
• Orifice: 2.1 mm
• Injector Flow Rate: 2.25 - 3.25 GPM
• Normally closed bypass
• Amps: 125 VAC 5A, 240 VAC 3A
• Max Temperature: 176° F
• Inlet Port: 3/8" FNPT
• Outlet Port: 3/8” FNPT
• Bypass Port: 1/4” FNPT
• Weight: 1.86 lbs

Features:
• Built-in exclusive down stream (venturi-type) injector with built in orifice provides more precise siphon rate
• Adjustable valve allows limit setting on both maximum pressure and minimum pressure
• Straight flow-through design minimizes pressure loss through valve
• Working components constructed of high-grade stainless steel. PTFE and Viton seals for maximum heat and chemical resistance
• Internal bypass valve can be easily accessed and repaired without removing unloader from unit

Specifications:
• Maximum Pressure: 3,625 PSI
• Minimum Pressure: 500 PSI
• Flow Rate: 8 GPM
• Orifice: 2.4 mm
• Injector Flow Rate: 3.35 – 5.0 GPM
• Normally closed bypass
• Amps: 125 VAC 5A, 240 VAC 3A
• Max Temperature: 176° F
• Inlet Port: 3/8" FNPT
• Outlet Port: 3/8” FNPT
• Bypass Port: 1/4” FNPT
• Weight: 1.86 lbs

Features:
• Only tamper-resistant operator adjustable valve in the industry which allows limit setting on both maximum pressure and minimum pressure
• Working components constructed of high-grade stainless steel. PTFE and Viton seals for maximum heat and chemical resistance
• Internal bypass valve can be easily accessed and repaired without removing unloader from unit

Specifications:
• Maximum Pressure: 3,625 PSI
• Minimum Pressure: 500 PSI
• Flow Rate: 8 GPM
• Max Temperature: 176° F
• Inlet Port: 3/8" FNPT
• Outlet Port: 3/8” FNPT
• Bypass Port: 1/4” FNPT
• Weight: 1.34 lbs

Features
• High Quality, German engineered components
• The Relax-Action™, German Engineered Technology reduces trigger pulling force by 40% and holding force up to 90% compared to usual competitors spray gun
• Relax-Action™ is designed for operators and applications with longer periods of cleaning time
• Easiest opening and holding trigger in its class
• Proper spray angle for optimal positioning of pressure points
• Forged brass housing for maximum strength

Specifications
• Max Pressure: 1,800 PSI
• Max Flow: 21.0 GPM
• Max Temp: 300° F.
• Inlet: 3/8" Female NPT
• Outlet: 1/4" Female NPT
• Weight: 1.30 lb

Suttner ST-2620F Relax-Action High Volume Foam Spray Gun 18 GPM and 4,000 PSI

Features
• Relax-Action™ trigger, German Engineered Technology reduces trigger pulling force up to 40% and holding force up to 90%
• For high volume, low pressure machines
• Proper spray angle for optimal positioning of pressure points
• Orange trigger lock identifies foam spray gun

Specifications
• Max Flow: 18.0 GPM
• Max Pressure: 4,000 PSI
• Max Temp: 100° F.
• Inlet: 3/8" FPT
• Outlet: 1/4" FPT
• Weight: 1.30 lb

Suttner ST-2635 Relax-Action Industrial Spray Gun 6,000 PSI 9.2 GPM with Carbide Ball & Stainless Steel Inlet. The Relax-Action™, German Engineered Technology reduces trigger pulling force by 40% and holding force up to 90% compared to standard spray guns

Features
• Stainless Steel inlet
• Relax-Action™ is designed for operators and applications with longer periods of cleaning time
• Easiest opening and holding trigger in its class
• Wear resistant carbide ball
• Forged brass housing for maximum strength
• Proper spray angle for optimal positioning of pressure points

Specifications
• Max Pressure: 6,000 PSI
• Max Flow: 9.2 GPM
• Max Temp: 300° F.
• Inlet: 3/8" Female
• Outlet: 1/4" FPT
• Weight: 1.30 lb

Suttner ST-265 Pressure Compensating Unloader Valve 5,070 PSI.

Features:
• Soft switching behavior
• Fatigue-free spring
• Particularly easy to maintain
• Low pressure drop
• Valve elements made of high-grade stainless steel and ceramic

Flyer

Specifications:
• Pressure:1,000 - 5,070 PSI
• Flow Rate: 13 GPM
• Max Temperature: 176° F
• Inlet Port: 3/8" FPT
• Outlet Port: 3/8” FPT
• Bypass Ports (2): 3/8” FPT
• Weight: 2.10 lbs

Suttner ST-265 Pressure Compensating Unloader Valve 5,070 PSI with Switch.

Features:
• Soft switching behavior
• Fatigue-free spring
• Particularly easy to maintain
• Low pressure drop
• Valve elements made of high-grade stainless steel and ceramic

Flyer

Specifications:
• Pressure:1,000 - 5,070 PSI
• Flow Rate: 13 GPM
• Max Temperature: 176° F
• Maximum inrush current 10mA-5A(2A)
• VoItage: 12-24VDC 12-250VAC
• Protection CIass: IP65
• CabIe:1.2 meters 3xAWG20
• Inlet Port: 3/8" FPT
• Outlet Port: 3/8” FPT
• Bypass Ports (2): 3/8” FPT
• Weight: 2.25 lbs

Features
• High Quality, German engineered components
• The Relax-Action™, German Engineered Technology reduces trigger pulling force by 40% and holding force up to 90% compared to usual competitors spray gun
• Relax-Action™ is designed for operators and applications with longer periods of cleaning time
• Stainless steel components
• 303 Stainless Steel Housing
• Easiest opening and holding trigger in its class
• Proper spray angle for optimal positioning of pressure points
• Food Grade

Specifications
• Max Pressure: 5,000 PSI
• Max Flow: 12.0 GPM
• Max Temp: 300° F.
• Inlet: 3/8" Female NPT
• Outlet: 1/4" Female NPT
• Weight: 1.24 lb